DAP 18-46-O Di-ammonium Phosphate Granular SPECIFICATION (Percent by Weight) (P205+N) 64.0% Min 64.7% Total nitrogen 18% Min 18.8% P205 46% Min 47.2% Moisture 2.5% Max 1.8% Nutrient 17% Min 18.4% Size (1-4mm) 90% Min 92% water 0.1% Max 0.03% Apperance Dark Brown or Yellow State Granular
Base oils are important basic raw materials for any lubricants included engine oils, gear oils, industrial oils, metal working fluids, hydraulic fluids and also greases. In most of the lubricants 70-90% ingredient is base oils. As per API classification Base oils can be grouped majorly into five groups, i.e., Group-I/II/III/IV/V. The base oil characteristics are very important in determining the quality of the finished product. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.
Base Oil SN 350 is a medium stock base oil produced from the vacuum distillates and residual components using the traditional refining methods. It has viscosity 8-9,5 cSt at 100C and 67-70 cSt at 40C. SN 350 is used in lubricant and lubricant additives production, mainly for industrial applications. The main benefits of SN 350 base oils are low sulphur content, high viscosity index, high oxidation stability and good susceptibility to the additives.
Base Oil SN 500 is defined as a light grade base oil at the upper end of the specifications for Grade I base oils. It is mostly used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base Oil SN 500 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils
Base oil SN 150 is known as a light grade base oil at the lower end of the specifications for Grade I light base oils. It is mostly used in lubricant and lubricant additives production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base oil SN 150 works as a base stock for several industrial lubricants. General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils
Light-Heavy Crude Oil, from Arab Gulf non sanctioned origin, best realistic economic conditions, safest workable procedures, transparent annul contracts, 12 monthly deliveries, transaction executed bank to bank through our Primary Banks, , delivery on STO & CIF ASWP,, zero upfront payment
PRODUCT: REBCO Crude Oil QUANTITY: 1,000,000 BBLs as Liftable Quantity PRICE: US$36.00 Gross / US$34.00 Net per BBL
Dear Sir/Madam I am Taufiqul Hakim Tsabit. We are direct with Russian refinery and we are ready to supply this product: CRUDE OIL REBCO GOST 51858-2002 Minimum liftable quantity: 1,000,000 BBL. Maximum: 4,000,000 BBL. Monthly price: Gross $40.00 USD / $38.00 USD Net on CIF Gross $38.00 USD / $36.00 USD Net on FOB Origin: Russia Commission: $1.00USD buyer side / $1.00USD seller side.
COMMODITIY : OMAN LIGHT CRUDE OIL ORIGIN : OMAN Quantity per Month: 6,000,000 Barrels Contract : 12 months Roll's extensions Price : Gulf Platt minus 4.50$ per bbl Inspection: Inspection document must be issued by SGS, Or similar International Inspection companies, like CHEOCHEM. Payment Terms : Payment by DLC MT700 Verbiage (100% sight, Irrevocable and Confirmed), valid for 365 days to be issued by / from a credit worthy Bank in Euro currency in Favour of the Seller. Packing : Bulk Delivery : 30 days from LC
Base oil 150N is defined as a light base oil at the lower end of the specification compared to a Class II light base oil. They are mainly used in the production of lubricating additives and lubricants. . Because it is a Group II base oil, it has undergone hydrocrack treatment steps to remove any impurities.
We supply Light Cycle OIl (LCO) Origin: Kazakhstan First Lift: 50,000 Metric Tonnes Contract: up to 100,000 MT/month x 12 months CIF Price: USD $270/MT LCO, a by-product of the fluid catalytic cracking (FCC) process in a petroleum refinery, can be used as a blendstock for the production of diesel and jet fuels. Light Cycle Oil (LCO) is the diesel boiling range material, which is produced in addition to gas and petrol in the Fluid Catalytic Cracking Unit (FCCU). The optimised partial conversion hydrocracking process provides an effective and flexible process to process LCO into desired products such as very-low sulphur diesel and high-octane high-aromatics naphtha.
BASE OIL SN 100-150-300-500-600-700 Base oil is a type of oil which is used as a base for lubricants. The main element of lubricants (volume wise) is base oil and it forms about 95% of lubricants weight. In some lubricants (Compressor and hydraulic oil) 99% of the oil is consisted of base oil and only the 1% which is left contains additives. Base oils can be reached from oil based and non-oil based resources. Most of the base oils used in the world are obtained from crude oil refining. Most of the compounds which form base oils are Paraphinic, Naphthenic and aromatic compounds. Base oils chemical properties and their impact on the usage of final lubricant: 1 volatility: reduction of the oil, oil thickening, sediments 2 surface activity: foaming, pressure tolerance, air release, emulsion expansion 3 oxidations: sediments, oil thickening, metal oxidation, mud forming 4 Viscosity: Fluidity in lower degrees, energy waste, abrasion protection, proper cooling 5 being soluble: Motor neatness, sealant compatibility, process applications, formulation sustainability The base oil which is extracted from crude oil is called mineral base oil which is categorized in two types (Paraphinic and Naphtshic). Paraphinic oils are consisted of normal hydrocarbons and Iso hydrocarbons. Naphthic oils are consisted of annular full hydrocarbons. Paraphinic oils have certain attributes in comparison with naphthic oils such as;
Wholesale Light cycle oil Light Cycle Oil (LCO) is a secondary liquid product derived from the fluid catalytic cracking (FCC) process in refineries. This process breaks down larger hydrocarbon molecules from heavy gas oils into smaller, more valuable products like gasoline and diesel. LCO typically sits between diesel and heavy gas oil in terms of boiling range and weight. Primary Characteristics: Appearance: Typically amber to dark brown liquid. Odor: Characteristic petroleum smell. Density: Intermediate, falling between lighter distillates and heavier oils. Sulfur Content: Can vary based on the feedstock and refining process, but often higher than diesel and gasoline. Applications: Blending Component: Frequently blended into diesel fuel to enhance volume, though this requires treating to meet emissions standards.
Light Cycle Oil, also known as LCO, is a refined product derived from the processing of crude oil. It has a higher density and boiling point range compared to diesel fuel but lower than heavy fuel oil. LCO is commonly used as a feedstock for fluid catalytic cracking units (FCCU) and is also used as a blend component for marine fuels.
Export Blend Crude Oil, offered by us, is procured from the best manufacturers in the industry. We work with end Refinery) who provide Export Blend Crude Oil that is extracted using advanced mechanisms. Our Export Blend Crude Oil is available mainly in two grades. We provide Export Blend Crude Gost at reasonable prices. Minimum quantity of Export Blend Crude Oil should be 50.000 MT. Grades Available : Export Blend Crude Gost 51 85S-2002 (R.E.B.C.O) Export Blend Crude Gost 9965-76 (R.E.B.C.O.)
Our company alba grups ltd.is producer: essential oils: rose oil, lavender oil, mentha pipperita oil, yarrow oil, roman chamomile oil, german chamomile oil,hyssop oil, helichrysum oil, juniper berry oil, pine oil, melissa oil, geranium oil, clary sage oil, salvia officinalis oil, oregano oil, rosemary oil, thyme oil, coriander seed oil, siberian fir oil, jasmine oil. flower waters: rose damascena water,rose alba water, lavender water,juniper berry water, frankincense water, helichrysum water wormwood water, mentha pipperita water, pine water, gernium water, salvia officinalis water, clary sage water, oregano water, rosemary water, thyme water, jasmine water absolutes: rose absolute , lavender absolute, beeswax absolute, oakmoss absolute concrets: rose and lavender dried hers: rose dmascena and rose alba flowers, lavender flowers, juniper berry, tilia flowers, rosehip berry,rosehip seeds and more dried herbs from bulgaria..
PRODUCT: ESPO Crude Oil QUANTITY: 1,000,000 BBLs as Liftable Quantity PRICE: US$38.00 Gross / US$35.00 Net per BBL