1) Material: AFM34 and steel 2) It suits for Bock FK40 NType compressor 3) High quality and Best price. 4) It is Bock gasket set, including valve plate gaskets, pump gasket,O-ring gasket and so on. 5) The material is imported from Germany and America, using best technology to process. 6) Shipping: It could be sent to you by DHL, EMS, UPS, Fedex or others. If you have shipping forward in China, it could be sent to them. 7) Payment: 30% deposit , and pay balance before delivery.
1. Type: single cylinder pistion compressor 2. Power: 1/6hp 3. Voltage: 220-240v/50hz; 110-220v/60hz 4. Air output per l/min.: 20-23l/min. 5. Connection: 1/8" bsp 6. Electric cable: 1.5m 7. Auto stop: start at 3bar, stop at 4bar. 8. Oil free, none air contaminated. Carton dimensions (cm): 47.5*29*52 ;pcs/ctn: 6 ; net weight: 21.6kg gross weight: 24.6kg
Configuration characteristics 1. A precisely-made central bracket is used to keep the motor aligned permanently with the air end. 2. A highly resilient coupling is adopted to make the compressor operate smoothly, and the elastomeric is long in useful life. 3. The discharge pipe is double-wall corrugated pipe, and the oil way uses a special high-pressure hose which is resistant to temperature up to 125¡ãc. 4. For the extremely high temperature conditions in some districts, the large-area plate heat exchanger and high- efficiency water chiller are used. 640kg
Our compressors have been well accepted with low rational speed, large displace-ment, working steadily,smart outlooking.Our products are made according to the National Stan-dard,Managed in ISO9001:2000. Satisfactory products plus satisfactory services í¦makes our success happen. We treasure this guideline that makes customers confident in us. We provide for our customers technical consultancy, on-site maintenance and spare parts Type:BM-50 HP:2 R.P.M:220V Lubricate type:oil Tank:13.3gal 50L L/min: 192 C.F.M :6.7 Pressure:BAR8 PSI:115 G.W:37Kg Packing::LxWxH(cm):71x32x72
1. Original imported airend from Germany, the most advance airend in the world 2. Original imported key components 3. Low Engergy Consumption, Low runing, maintenance cost. 4. Aptitude and intelligent Control, PLC control, LCD displayer. 5. Unique safe units make whole compressor more safty, more stable, lest noise, lest energry Loss. 6. Easy to install, operate, maintent. Model SCR10I-7 SCR10I-8 SCR10I-10 SCR10I-13 Capacity/Pressure (m3/min.Mpa-1) 1.2/0.7 1.1/0.8 0.9/1.0 0.8/1.3 Motor Power(KW) 7.5KW(10H.P) Speed(r/min) 2878 Starting way Directly startup Volt(V) 380(440/220) Motor safety grade IP54 Motor isolation grade F Electrical Supply 380V/50HZ/3Phase or 440(220)V/60HZ/3Phase Outlet Temperature( ¿¼C ) í- Enviroment Temperature í+ 8¿¼C Driven way Belt Driven Noise level at 1 meter 68 í+ 3dB(A) Cooled method Air cooling Oil content 1 ~ 3 ppm Outlet Connection Rc 1/2 " Dimension Length(mm) 1050 Width(mm) 600 Height(mm) 950 Weight(kg) 250
Features of the belt driven screw compressor 1.The device is comparatively small in size but highly efficient.An economical ghh air end is attached to the motor via a durable belt, an arrangement designed to fully harness the raw power produced by the air end. 2.Air horse achieves the ideal equilibrium between power and air consumption throughout the loading phase for an exceptionally efficient performance. 3.A fully enclosed design acts to contain noise to a threshold of 68db or less 4.Avoid needless energy consumption with the integrated energy savings design.The machine automatically adjusts according to real-time power readings to eliminate load-free running. 5.The streamlined exterior of the enclosure is bright orange by design and projects vitality. 6.A multi-functional electronic controller complete with led display provides a convenient, user-friendly interface. 7.The certified machine is assembled with strict compliance to ce and iso9001 standards. 8.We offer a one year warranty covering the entire machine and three year standalone warranty for the air end. 9.A modified voltage service is provided with the purchase of the machine to accommodate various power Weight:580kg
Features of the belt driven screw compressor 1.The device is comparatively small in size but highly efficient.An economical ghh air end is attached to the motor via a durable belt, an arrangement designed to fully harness the raw power produced by the air end. 2.Air horse achieves the ideal equilibrium between power and air consumption throughout the loading phase for an exceptionally efficient performance. 3.A fully enclosed design acts to contain noise to a threshold of 68db or less 4.Avoid needless energy consumption with the integrated energy savings design.The machine automatically adjusts according to real-time power readings to eliminate load-free running. 5.The streamlined exterior of the enclosure is bright orange by design and projects vitality. 6.A multi-functional electronic controller complete with led display provides a convenient, user-friendly interface. 7.The certified machine is assembled with strict compliance to ce and iso9001 standards. 8.We offer a one year warranty covering the entire machine and three year standalone warranty for the air end. 9.A modified voltage service is provided with the purchase of the machine to accommodate various power Size(l*w*h)mm:1150*900*1380mm
1.3cm steel materials for the gas tank, firm and safe. 2. inlet pipe made by copper , durable, abstraction of heat . 3.the perfect welding techniques, coupled with the great paint processing technology, up to craft requirements 4.Add the over-current protection switch to protect the compressor heard safe 5.One way valve adopt stainless steel balls design, reduces the leak. 6.Stable performance, the noise in line with a quiet place where gas supply requirements. 7.Copper wire line's diameter of power line ensure compliance with safety standards, less heat and more safety control. Supply voltage:vac 50hz Electric current: 2.4a Power : 545w Flow rate: 70l/min Start-up pressure: 0.5mpa Discharge pressure:0.8mpa Air container volume:32l Noise:56-65db Weight : 27.45kg(32l) Package size: 46*45.5*71.5cm (32l) carton Color:Blue and white
The compressors is used for refrigerators, freezers refrigerator, kitchen refrigerators, cold boxes, display cabinets, dehumidifiers and other cooling appliances. Mbp:-5oc~-25oc lbp:-15oc~-35oc mbplbp back pressure compessors Series Model Nominal power(h.P) Refrigerant Motor type Displacement(cm3 ) Voltage Fn series Qd30a 1/12 R12 Rsi(ptc) 3.0 100v-110v 50hz 100v-115v 50hz/60hz 220v-240v 50hz/60hz 220v-240v 50hz Qd36a 1/10 R12 Rsi(ptc) 3.6 Qd43a 1/8 R12 Rsi(ptc) 4.3 Qd51a 1/6 R12 Rsi(ptc) 5.2 Qd57a 1/6+ R12 Rsi(ptc) 5.7 Qd66a 1/5 R12 Rsi(ptc) 6.6 Qd77a 1/5+ R12 Rsi(ptc) 7.7 Qd91a 1/4 R12 Rsi(ptc) 9.1 Qd110a 1/3 R12 Rsi(ptc) 11.0 Qd120a 3/4 R12 Rsi(ptc) 12.0 Qd140a 1/2 R12 Rsi(ptc) 14.0 Qd30y 1/12 R134a Rsir(ptc) 3.0 Qd36y 1/10 R134a Rsir(ptc) 3.6 Qd43y 1/8 R134a Rsir(ptc) 4.3 Qd51y 1/6 R134a Rsir(ptc) 5.2 Qd57y 1/6+ R134a Rsir(ptc) 5.7 Qd66y 1/5 R134a Rsir(ptc) 6.6 Qd77y 1/5+ R134a Rsir(ptc) 7.7 Qd91y 1/4 R134a Rsir(ptc) 9.1 Qd110y 1/3 R134a Rsir(ptc) 11.0 Qd120y 3/4 R134a Rsir(ptc) 12.0 Qd14oy 1/2 R134a Rsir(ptc) 14.0 .
Compressors units (totally 4 pcs) are built by York Sabroe in 2002 and 2003 and they operate with R22 refrigerant. Two identical SAB 128 HF screw compressor units are built on a common base frame with an integrated horizontally mounted oil separators, oil circulation pumps and local operating panels. Common (for two compressors) plate type Freon / Glycol evaporator, internal glycol circulating pump and one large Freon buffer tank is also build on the same base frame. Delivery includes also evaporative condenser and LV / Control cabinet and external glycol circulating pump. Above described 2 x SAB 128 HF packages we have two for sale, one made in year 2002 and the other year 2003. Both packages are still installed and can be tested in mutually agreed time. Units have been in operation approx 6 years and 5 years and they are in very good condition. Technical data Number of compressors - 4 pcs Compressor type - SAB 128 HF Refrigerant - R 22 Cooling capacity - 4 x 379 kW ( 0 /+40C) Swept volume - 4 x 454 m3/h Electric drives (compressor) 4 x 110 kW - 400/690 V 50Hz (also suitable for 60Hz) Freon buffer tank -2 x 1650 liters Plate evaporators - Alfa-Laval M10-BW FGR Evaporative condensers - 2 x BAC VXC 116 Closed Circuit Condenser fans - 1 x 17 kW and 1 x 4 kW for each Condenser circulating pumps- 2 x Grundfors LP80 - 25/133 Glycol pumps - 2 x Grundfors LP 80 - 25/133 2 x Hilge Mahana 65-160
Specifications Compress air system compress air station 1. Air compressor 2. Air receiver 3. Air dryer 4. High efficiency air filter Compress air system ;compress air station, air compressor, air dryer, air tank, air filter Compress air system ;compress air station 1. Air compressor 2. Air receiver 3. Air dryer 4. High efficiency air filter Compress air system ;compress air station
45m3/h 7.5KW 150 bar 300bar Oil-Free oxygen booster gas compressor Industrial high-pressure gas air compressor The diaphragm compressor booster is a special structure of the volume-type compressor with high compression ratio, good leak tightness, compressed gas without lubricating oil and other solid impurities contaminated features, So it's suitable for high purity compression, rare, valuable, inflammable, explosive, toxic, harmful, corrosive, and high-pressure gas. Note: 1, In addition to the above-mentioned products we can also provide products used for compression of various gas and other specifications and models upon users' special requirement. 2, Clients' inquiries should contain related parameters A. The gas compression medium B. The flow rate: _____Nm3/hr C. Inlet pressure: _____ Bar D. Discharge pressure: _____ Bar E. Inlet temperature F. Cooling water temperature as well as other technical requirement.GZ Type Diaphragm Compressor Features A displacement compressor with a special, diaphragm compressor is characterized by a large compression ratio, good sealing performance, and that the compressed air will not be polluted by lubricant or other solid impurities. Therefore diaphragm compressor is applicable to compress high-purity, rare and precious, flammable and explosive, toxic and hazardous, corrosive and high_pressure gases. Keep in diaphragm compressors consist of four types that are Z type, V type, L type, and D type. The exhaust pressure ranges from 1.3 to 49Mpa. The products are widely used in the industries of national defense, scientific research, petrochemical, nuclear power, pharmaceutical,food-stuff, and gas separation. How does a diaphragm compressor work? Diaphragm compressor. A diaphragm compressor is a variant of the classic reciprocating compressor with backup and piston rings and rod seal. The compression of gas occurs using a flexible membrane, instead of an intake element. The back and forth moving membrane are driven by a rod and a crankshaft mechanism.
Mobile air compressors are widely used in mining, water conservancy, transportation, shipbuilding, urban construction, energy, military and other industries. product category 1. Diesel mobile air compressor: Driven by a diesel engine, it drives the rotation of the screw compressor rotor to compress air and other equipment with a certain pressure. 2. Electric mobile air compressor: driven by an external power supply to drive the action of the air compressor. Advantages 1. High reliability: The compressor has few parts and no wearing parts, so it runs reliably, has a long life, and the interval between overhauls can reach 40,000 to 80,000 hours; 2. Convenient operation and maintenance: The degree of automation is high, and the operator does not need to go through long professional training, and can realize unattended operation; 3. Good power balance: There is no unbalanced inertial force, it can run smoothly at high speed, and can realize no-base operation. It is especially suitable for use as a mobile compressor, with small size, light weight and small footprint; 4. Strong adaptability: It has the characteristics of forced air delivery, the volume flow is almost not affected by the exhaust pressure, and it can maintain high efficiency in a wide speed range.
Atlas Copco Oil Filter 1622365200 Replacement No.:SO3414B Trademark:MANFEITE Suitable Machine:GA75 Advantages: 1.Specialized in compressor filters for about twenty years; 2.Factory direct with more competitive price&quality products.
The diaphragm compressor booster is a special structure of the volume-type compressor with high compression ratio, good leak tightness, compressed gas without lubricating oil and other solid impurities contaminated features, So it's suitable for high purity compression, rare, valuable, inflammable, explosive, toxic, harmful, corrosive, and high-pressure gas. Note: 1, In addition to the above-mentioned products we can also provide products used for compression of various gas and other specifications and models upon users' special requirement. 2, Clients' inquiries should contain related parameters A. The gas compression medium B. The flow rate: _____Nm3/hr C. Inlet pressure: _____ Bar D. Discharge pressure: _____ Bar E. Inlet temperature F. Cooling water temperature as well as another technical requirement.GZ Type Diaphragm Compressor Features A displacement compressor with a special, diaphragm compressor is characterized by a large compression ratio, good sealing performance, and that the compressed air will not be polluted by lubricant or other solid impurities. Therefore diaphragm compressor is applicable to compress high-purity, rare and precious, flammable and explosive, toxic and hazardous, corrosive and high_pressure gases. Keep in diaphragm compressors consist of four types that are Z type, V type, L type, and D type. The exhaust pressure ranges from 1.3 to 49Mpa. The products are widely used in the industries of national defense, scientific research, petrochemical, nuclear power, pharmaceutical,food-stuff, and gas separation. How does a diaphragm compressor work? Diaphragm compressor. A diaphragm compressor is a variant of the classic reciprocating compressor with backup and piston rings and rod seal. The compression of gas occurs using a flexible membrane, instead of an intake element. The back and forth moving membrane are driven by a rod and a crankshaft mechanism.
Diaphragm Compressor Features of products: 1. Compressed gas is completely sealed from outside, which provides high sealing performance; the compressor of high sealing performance is specially suitable for use to compress gas in radioactive area of nuclear power plant and highly poisonous gas; 2. Owing to nonexistence of lubricant in diaphragm cavity, namely it is impossible for gas to contact any lubricant, there is no problem to compress to higher pressure the dangerous gas and oxygen, fluorinated gas and chlorine, etc; 3. Compared to the compressors of other types, gas will not be polluted by the particles produced due to abrasion of sliding parts, therefore, it is absolutely ensured the same purity of compressed gas as that of the gas when entering compressor. Therefore, it is suitable for high purity gas such as electronic gas, breathing gas and hydrogen used in fuel cell technology; 4.Diaphragm alarm device and low-pressure alarm of lubricating oil ensure safety and reliability of operation of compressor;We offer a wide variety and types of diaphragm compressors. You can install these in many different scenarios. It is possible to install the compressors in hydrogen houses between and electrolyzer and a storage system, in businesses to support their needs such as ice cream companies for hydrogenation, at farmers where they use it to produce ammonia as a fuel at the back of a wind farm or solar farm, and refineries to pressure the hydrogen before it is being used to clean up the gas or oil. There are also many applications for our H2 gas compressors. For instance, you can also use the diaphragm compressor in green hydrogen transport applications, energy storage solutions, grid balancing, food processing, and power station cooling. We pride ourselves at ensuring that as many applications of our compressor units use renewable electricity to pressure the hydrogen. Each of our H2 compressor units is unique. It is built to your needs all with the latest innovations in hydrogen compression, safety, and operation. We offer different hydrogen flow and pressures all set to match your storage working pressure. We can customize hydrogen into different types of storage systems at 150bar 200 bar, 350 bar (5000 psi), 450 bar, 500 bar, 700 bar (10,000 psi), 900 bar (13,000 psi).
Oxygen Compressor induction High quality Oil free Oxygen Compressor, which is customized for booster the oxygen pressure to fill the oxygen gas into the oxygen cylinders. Oxygen Compressor Features 1. Non-lubrication, oil free; 2. Equipped with low voltage asynchronous motor; 3. The core of the 1st stage and the inside of the cooler is stainless steel; 4. Skid mounted; 5. Time proven. Oxygen Compressor specifications (1) Flow capacity: 50Nm3/h; (For other flow capacity, please let us know.) (2) Inlet pressure: 4bar (0.1-5bar) (3) Discharge pressure: 150bar (4) Vertical, two columms, three stage, three cylinders. single action, water cooled, oil free. The quotation and main technical parameters of ZW-0.2/4~150 oil free oxygen compressor (Fitted 380V,50Hz low voltage asynchronous motor) ZW-0.2/4~150???????? (?????) ZW-0.2/4~150 non-lubrication oxygen compressor (skid type, namely bare oxygen compressor, driven motor, 1st, 2nd, 3rd stage cooler, gas pipeline are in the same skid) A. Bare compressor/?????(2Z2.2???-the parts are in the same skid, namely the bare compressor, driven motor, 1st, 2nd, 3rd stage cooler, gas pipeline are in the same skid) 1.Model ZW-0.2/4~150 2.Type Vertical type, two columns three stages, three cylinders, single action, water cooled, oil free of cylinder. 3.Compressed medium ??/oxygen 4.Capacity 0.2 m3/min (50Nm3/hr) 5.Suction pressure 0.4 MPa g 6.Discharge pressure 15 MPa g 7.Suction temperature =40? 8.Discharge temperature =40?(????/cooled by 3rd stage cooler) 9.Shaft power =14 10.Stoke of piston 130mm 11. Lubricant temperature =70? 12.Water inlet temperature =30? 13. Water outlet temperature =40? 14.Consumption of cooling water =4 t/h 15.Driven way Driven by belt 16.Overall dimension 2495mm×1800mm×2945mm(L×W×H) 17. Weight of compressor 4000 kg B.Motor 1.Type Low voltage asynchronous motor 2.Model Y180M-4 3.Rated power 18.5 KW 4.Rotational speed 1470r/min 5.Voltage 380V 7. Protective level IP 44 8 frequency 50 HZ C.Electric control cabinet 1./Model ??/Cabinet 2./Type XHS-18.5 (??????) DAfter cooler 0505.063??? coil pipe type E/ Gas inlet filter the material of shell and screen for filter is stainless steel 1./Model 0663.048 F/Check valve 0663.087 G./Attached special tools H./Attached special spare parts, accessories I./Attached documents
Whether you need to bring electricity to a jobsite or severe weather has taken out your house power, this Campbell Hausfeld 2-in-1 air compressor/generator with a Honda engine provides compressed air and electric power to meet your needs. Ideal for commercial and industrial applications on the jobsite and mobile services, this unit is powered by a reliable Honda GX390 gas engine. Two-stage cast iron air compressor delivers high output and reliability, with twin 5-gallon air tanks and a heavy-duty steel belt guard for safety. 5,000 Watt generator has a UL/OSHA compliant control panel and 3 outlets with GFCI protection. 49.8in.L x 26in.W x 34.5in.H. What's Included (1) 2-in-1 Air Compressor/Generator with Honda Engine, Model# GR2100 Features + Benefits Commercial and industrial jobsite power Alternative power during severe weather Honda GX390 OHV gas engine with electric start Compressor output: 14.3 CFM @ 90 PSI; 13.7 CFM @ 175 PSI Generator with 5,000 continuous/6,000 surge Watts Two 120V, 20 Amp outlets and one 120V/240V, 30 Amp twistlock outlet Key Specs Item# 44911 Brand Campbell Hausfeld Manufacturer's Warranty 1 year Limited Warranty Ship Weight 486.0 lbs Max. PSI 175 HP 13 CFM at 175 PSI 13.7 CFM at 90 PSI 14.3 Engine Honda GX390 Start Type Electric Stage 2 Tank Type Horizontal twin Air Tank Size (gal.) 10 Portable or Stationary Stationary Pump Cast iron Duty Cycle 100% at 50A/65% at 180A Dimensions L x W x H (in.) 49 2/5 x 26 x 34 1/2 Visit our website OFFICIAL STORE ACETOOLS-SUPPLIES for catalog, transaction, full Description, Term and Conditions, best product, or special price.
D-type Compressor Specification Keeping has developed models for 2D3.5,2D5.5,2D8,2D12,2D20,2D25,2D32,2D50 and 2D80 series compressors. T products are stable, reliable, and have already been in series and modularized. keep win can also rapidly provide products of other specifications through modular combination design upon users' requirements. Lubrication includes oil lubrication, low-oil lubrication, and oil-free lubrication; The cooling method includes Water cooling. Installation type includes: Stationary and Skid MountinD Type Reciprocating Compressor Features Keeping Process air/ gas Reciprocating compressors consist of four types that are V type, L type, and D type, P-type, M type. The exhaust pressure ranges from 0.2Mpa to 49 Mpa. The products are widely used in the industries of national defense, scientific research, petrochemical, nuclear power, pharmaceutical,food-stuff and gas separation.No gas pollution, and No gas leakage during compression and transportation process. Note: 1, In addition to the above-mentioned products we can also provide products used for compression of various gas and other specifications and models upon users' special requirement. 2, Clients' inquiries should contain related parameters A. The gas compression medium B. The flow rate: _____Nm3/hr C. Inlet pressure: _____ Bar D. Discharge pressure: _____ Bar E. Inlet temperature F. Cooling water temperature as well as another technical requirement.
Air Compressor introduction BT Screw Air Compressor, which is based on rotary screw technology, is running stable, and has been market proven. Now, BT is owned by Atlas Copco. Air Compressor Features 1. Atlas Copco owned company in China; 2. Stable, market proven; 3. Low noisy level. Air Compressor specifications Model Power (kw) Discharge Pressure (Mpa) Air flow (m3/min) DImension(mm) Interface 7A 5.5 0.7 0.85 0.8 0.75 630*620*755 3/4" 1.0 / 1.2 / 10A 7.5 0.7 1.35 0.8 1.25 950*650*855 3/4" 1.0 1.10 1.2 0.96 15A 11 0.7 1.95 0.8 1.80 950*650*855 3/4" 1.0 1.58 1.2 1.30 20A 15 0.7 2.25 0.8 2.15 950*650*855 3/4" 1.0 1.95 1.2 1.60 25A 18.5 0.7 3.20 0.8 3.00 1100*865*1145 1" 1.0 2.70 1.2 2.30 30A 22 0.7 3.80 0.8 3.60 1100*865*1145 1“ 1.0 3.20 1.2 2.80 40A 30 0.7 4.75 0.8 4.50 1100*865*1145 1“ 1.0 4.25 1.2 3.75 50A 37 0.7 6.80 0.8 6.28 1335*970*1630 1.5" 1.0 5.60 1.2 4.60 60A 45 0.7 7.80 0.8 7.30 1335*970*1630 1.5" 1.0 6.60 1.2 5.70 75A/W 55 0.7 10.50 0.8 9.80 1585*1170*1800 2" 1.0 8.80 1.2 8.00 100A/W 75 0.7 13.50 0.8 13.00 1585*1170*1800 2" 1.0 11.80 1.2 10.00 75AG/WG 55 0.7 10.80 0.8 10.00 1585*1170*1800 2" 1.0 9.00 1.2 8.20 100AG/WG 75 0.7 13.80 0.8 13.30 1585*1170*1800 2" 1.0 12.10 1.2 10.20 120A/W 90 0.7 17.1 0.8 16.9 1710*1170*1800 2" 1.0 14.6 1.2 12.6 150A/W 110 0.7 21 0.8 20 2476*1526*1800 DN65 1.0 17 1.2 14.8 175A/W 132 0.7 24.1 0.8 23.6 2476*1526*1800 DN65 1.0 20.5 1.2 17.8 200A/W 160 0.7 29 0.8 28.5 2650*1720*2100 DN80 1.0 26.5 1.2 22.5
