Tungsten carbide rods. Wooden box.
Tungsten carbide (TC) balls are used where extreme hardness and wear resistance is required; in such applications as bearings, ball screws, valves and flow meters. They are also used for coining and as pivots, detents and tips for gages and tracers. Decimal-inch sized tungsten carbide balls are widely used for ballizing (below) or measuring hole sizes (see Inspection Products data sheet.) They are also used for inspection tools, comparative checking and gaging.
Customized Tungsten Carbide Nozzle TC Sand Blasting Nozzle ,tungsten carbide nozzle with wear-resistance fuction,high temperature resistance, wear resistance and corrosion resistance.It is mainly used for the oil pump valves such as sand wells, heavy oil wells, offshore oil wells and high-pressure sulfur-resistant oil wells in the petroleum industry
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products. ISRI-CODES: (27) Rail, steel No.1 â?? Standard section T rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28a) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28b) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28c) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 3 feet long and under. (29) Rail, steel No.3 â?? Standard section T, girder and/or guard rails, to be free from frog and switch rails not cut apart and contain no manganese, casts, welds or attachments of any kind except angle bars. Free from concrete, dirt and foreign material of any kind. We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.
We have tungsten carbide scraps in korea. please contact me if you have interested in this. thanks, Lee
Tungsten Carbide Plate application Our carbide plates are used for mould, electronic progressive dies and punches. Cutting aluminum alloy ,cast iron , stainless steel. Refractory alloy steel, nickel-based alloy , titanium alloy and nonferrous materials. Make PCB drills , drills , end mills & reamers , mold punches , core pins&hole drilling tools. Features of High Performance 2MM, 3MM, 4MM, 330mm Long Carbide Plate, Tungsten Carbide Strips 1. Good wear resistance, good corrosion resistance and high toughness; 2. Extrusion method and HIP sintering; 3. Carbide wear strips Made of 100% pure raw materials; 4. With advanced equipment and process production; 5. All tungsten carbide wear strips pass the process and final inspection; 6. The ability to stabilize and continuously produce; 7. Our carbide wear strips have high quality and good price; 8. Fast stocking capacity and timely delivery.
TUNGSTEN CARBIDE ZUND BLADE CUTTING KNIFE FOR DIGITAL CUTTER Zund Cutter Blade When get a new inquiry, always hear new clients complain about the following question: - WHY BLADES ARE SO DULL? - WHY BLADES ARE SO EXPENSIVE? - WHY PACKAGINGS LOOKS WITHOUT ANY INNOVATION? If you have above question about CARBIDE ALLOY BLADE, please contact FRONTIER to solve these issues: - We could custom packagings with your logo, SKU, BARCODE...ect.
Size: OD: 10-500mm,Id: 5-400mm H:1.5-100mm Material: yg6,yg8,yg10,yg12,yg15,yg20,yg25,ywn6,ywn8... Hardness: 89-91HRA Density: 14.5-15.0g/mm3 Application: mechanical face seal
Size: 5-300mm Material: yg6,yg8,yg10,yg12,yg15,yg20,ywn6,ywn8.... Hardness: 89-91HRA Density: 14.5-15.0g/mm3 Machine: OEM customize base on drawing
Specification of tungsten carbide miningtips/ mining button bit /drill bits / button drill bits 1.High wear&impact resistance 2.Advanced equipment. 3.A long lifetime 4.High performance Application of tungsten carbide miningtips/ mining button bit /drill bits / button drill bits Tungsten carbide drill bit is widely used in mining, sand,cement,metallurgy and hydropower engineering industries. Advantages of tungsten carbide miningtips/ mining button bit /drill bits / button drill bits *Use 100% tungsten carbide raw material *ISO 9001 Certification *with ten year experience *Advanced technology , automatic pressing , HIP sintering And precision grinding *the tolerance of polish and ground can be +0.005/-0.005m white plastic box inside and carton box outside, or per customer's requests
Place of Origin: Hunan, China (Mainland) Brand Name: APPLE Model Number: various,can be customized Material: tungsten carbide Grade: YS2T/UF6A/YG8/K10/K20 Largest diameter: up to 400mm Surface condition: blank or grinding Teeth: with or without Packing: standard export packing or per customers' request Certification: ISO9001 Shape: circular Sample: available Sinter: HIP sintering Description 1.Sharp cutting edge 2.Good wear-resistent,long service life 3.Exclusive cutting blade for wood,PCB board,circuit boat,plastic and so on 4.Professional package,protecting the edge from damage 5.We can make carbide disc cutter with teeth or without teeth,blanks or ground 6.Process according to customer's different request 7.Samples available Recommended grade: YS2T/UF6A/YG8/K10/K20/K30, other grade may be offered by customers' request. Application: It's widely used for paper,steel, soft metal,wood, MDF cutting,etc. Advantages of our carbide circular blade 1. With submicron grain size 2. With strict tolerance extent control 3. Enjoy excellent wear resistance & high toughnes 4. Have very good thermal & chemical stability 5. A special Hot Isostatic Press (HIP) process provides quality improvement to the finished products to ensure meterial reliability seperately wrapped by foam sheet for proctecting, and carton box outside
Place of Origin: Hunan, China (Mainland) Brand Name: APPLECARBIDE Carbide Turning Inserts/ Cemented CarbideTurning Inserts Model Number: SNMG Material: Fine grain tungsten carbide matrix Usage: External Turning Tool Hardness: Above 90HRA Coating: TiCN / Al2O3 Product Name: cemented carbide turning/ carbide inserts turning blade SNMGSeries Workpiece Material: cast iron and steel Application: for roughing, semi-finishing Sintering: HIP sintering Vc: 100-80M/min ap: 1.5-5mm Stock: available Place of production: ZhuZhou city Certificate: ISO9001 Life Time: GOOD 10 pieces in a platic box,carton box outside
Place of Origin: Hunan, China (Mainland) Brand Name: APPLE Material: Carbide, Tungsten carbide Diameter: dia from 1mm-20mm Type: End Mill Coating: TiCN, Nano TiAlN coating, TiAlN coating, AlTiN coating Overall Length: 50-150mm Product name: factory price of carbide end mill/carbide endmill/carbide end mills Chemical composition: WC, Co Tool part: cobalt drill bits Appilcation: for aluminum cutting and maching Flute:1, 2,3,4,6 flutes Sinter: HIP sintering Certificate: ISO900 Description of carbide end mill/end mills/endmill: 1, Chip pocket wih unique shape exerts excellent performance even in slot and cavity machining. 2, Sharp cutting edge and large helical angel design effectively prevent built-up edge. 3, Anti-vibration design of whole edge can suppress the charttering during machining and improve surface quality. End tooth type of carbide end mill/end mills/endmill : 2-flute flattened end mills 2-flute ball nose end mills 2-flute R end mills 3-flute flattened end mills 3-flute R end mills 4-flute flattened end mills 4-flute ball nose end mills 4-flute R end mills 6-flute flattened end mills Machining operation of carbide end mill/end mills/endmill : flattened end mills for side machining flattened end mills for shoulder machining flattened end mills for straight slot machining flattened end mills for deep slot machining ball nose end mills for profile machining ball nose end mills for cavity machining ball nose end mills for slot machining ball nose end mills for deep slot machining R end mills for side machining R end mills for slot machining R end mills for profile machining
Tungsten carbide insert scrap. End mills, inserts, drills. Std lot size 1000 kg Std 220 drum 4 drums per pallet
HMS 2 Scrap :HMS 1 HMS 2 METAL SCRAP / USED RAILS / CAST IRON FOR SALE ! Used Rails R50 - R65, At Best Price/Used Rail Scrap for sale /Used Railway Track in Bulk Used Rail Steel Scrap HMS 1 and HMS 2 Scrap Heavy Melting Scrap Product Name rail steel Specifications 38Kg/m 43Kg/m 50Kg/m 60Kg/m Length 12M, or customized as required Standard ASTM, JIS, DIN, GB, Steel Grade ASTM A2008 JIS 1103-91 DIN 536 GB/T 2585 Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test. MOQ 1 Ton Delivery Condition Forged +Rough Machined (Black Surface) Application scenario Train tracks, cranes, construction Processing Service Welding, Drilling, Cutting, Bending Packing Wooden pallet or according to customer's request Lead time 7 to 15 working days Payment terms T/T Quality Excellent
R50- R65 - IRSI CODES; The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65 Chemical Composition Used Rails; C: 0, 54 - 0,82 Si: 0,18-0,40 Mn: 0, 60-1, 05 S: 0.04 max P: 0,035 max As.: 0, 01 max of Mass share Norms: R-50 GOST7173-75 and R-65 GOST-8165-75 The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m) Used Rail ISRI 27-29 ISRI-CODES; (27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail. (28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under. (28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under. (28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under. (29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind. The rails can be cut to the length the buyer wants
Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments. Our drawing dies are made of high purity tungsten powder the size area are 20% longer than common mould,these factors make sure our wire drawing dies can work longer! we can also produce the following types:Z11,w.v.s13,S12,S10,S01,L,13,11 Note: Other specification can be made upon customer's requirements.---chengdu woco carbide
Tungsten carbide cobalt sintered and crushed powder is high hardness coating powder.The sintered and crushed morphology generally produces a higher coating density compared to agglomerated and sintered powders.It offers dense, excellent bonding and provides resistant to abrasion erosion and sliding wear . The coating also has high wear resistance but with low coefficient of friction.
Tungsten carbide gripper jaws are tools used to clamp and hang the casing string during the drilling process. They are used to clamp or place between the casing of the drill pipe. They are used to tighten and hang the casing string and oil string in the well to prevent them from falling into the well. Note: Other specification can be made upon customer's requirements.
Tungsten carbide gripper jaws are tools used to clamp and hang the casing string during the drilling process. They are used to clamp or place between the casing of the drill pipe. They are used to tighten and hang the casing string and oil string in the well to prevent them from falling into the well. Note: Other specification can be made upon customer's requirements.
