Features may include: Powering Your Boat from 115 H.O. to 300 HP E-TEC G2 Best In Class fuel economy E-TEC Direct Injection Fuel Technology V6 from 150 H.O. to 300 HP Power Steering Available in white or gray, plus color panels Engine Engine Type V6 66 E-TEC G2 D.I. Bore 3.39 in (86 mm) Stroke 3.10 in (78.7 mm) Displacement 167 Cu in (2.7 cc) Throttle 5000-6000 RPM Gear Ratio (Primary) 2.17:1 Steering Tie Bar/Remote Electric Starter Electric Alternator 133 Amps Total / 50 net Dedicated / 14 amps @ idle Fuel System Fuel System E-TEC Direct Injection with stratified low RPM combustion mode Dimensions Length Shaft: 25 in (635 mm) Weights Weight 512 lbs (233 kg) Features Features Controls: Slate Gray
Threaded rods, coupling nut, nut and bolts, channel spring nut, washers.
Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Material Origin : Car Battery / Van Battery / marine batteries and industrial traction batteries. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. . Automotive Waste Batteries completely washed, cleaned with lead acid contents. RAINs per ISRI Specifications) (Product Detailed SpecWET/DRY WHOLE INTACT CAR LEAD BATTERIES(RINKs and ifications) height :116mm and whight :310 gr height :123mm and whight :350 gr Used Auto Battery Scrap Drained lead battery scraps Lead Battery Plate Scrap Type Battery Scrap 20D 16H Lead Battery Plates Scrap Lead Battery Plate Scrap Type soft lead scrap Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
Brass components ,brass precision part,brass cable glands, brass molding insert,brass stop plugs,brass ppr inserts,brass hardware, brass & metal nozzles,brass nipples, brass sanitary part,brass bush and brass products,brass anchors & fasteners, brass lock nut & check nuts & dome nuts, brass turned components,brass inserts, brass auto parts, brass threaded stud, brass forging components, brass forging metal turning parts, brass shower header wall bracket socket,brass electrical components,brass shower hinges pipe to glass connector,brass shower header clamp,brass knob,brass pipe bush,brass guide bush,brass parts,brass tuned components,brass and metal precision parts,brass,ms,ss elbow fitting,brass terminal box connector,brass tee,brass,ms,ss,aluminium stand off(spacers),brass&ms&aluminium &steel metal adapter,brass&ms & aluminium & steel precision turned components,brass & ms& aluminium & steel & metal nuts, bolts, washers, zinc (zamak,mazak) metal parts, brass & ms, ss, zinc, aluminium.Manufacturer & exporter
The anchor chain is a steel chain connecting the hull and the anchor. The main functions of the anchor chain are: connecting the anchor and the ship, transferring the anchor holding force to the hull; when anchoring, the thrown anchor chain has a certain weight, which can buffer the wind and other external forces on the ship in the water; the force of the anchor chain on the anchor in the flat underwater part can maintain the level, which is conducive to the reliable bottom holding of the anchor. At the same time, this part of the anchor chain is blocked by the soil, which can also provide part of the anchoring force.
Anchor Chain Marien Anchor Chain Anchor Chain manufactuer Anchor Chain factory Anchor Chain with stock Anchor Chain with KR LR BV NK CCS ABS DNV-GL RMRS RINA IACL certificate. Aohai Anchor Chain A leading anchor and anchor chain manufactuer factory With IACS approval and keep some size from 22~122mm in stock can delivery in 1~5 days any inquiry please feel free to contact us
We mainly manufacture precision castings and deep-processed products made of stainless steel, carbon steel, alloy steel, nickel-based alloy and copper-base alloys. Etc.Which is near qingdao port. Our products include bruce anchor, folding anchor, denforth anchor, plough anchor, delta anchor, anchor chain, hinge & shower hinge, cleat, chocks, rigging(trunbuckle, shackle, hook), fitting(elbow, tee, cross), shaft, clamp, bracket, valve, pipe, impeller, spider, rail base, stanchion etc and machinery parts, architecture hardware. Also, we can manufacture according to customers drawings and samples. 1. Material: stainless steel 316, 304.Or according to you request. 2. Process: lost wax process, silicasol process casting. 3. Small order accepted 4. Make maching service as your requirements or drawings. 5. Surface treatment: mirror polishing. Electrico polishing, machining, machining center, plating, heat treatment. 6. Attractive appearance, lasting corrosion resistance 7. Customized samples or drawings are accepted. We are warm welcome you to our factory for visit and further cooperation.
Indonesia Film Faced Plywood Manufacturer and Exporter 2024 Marine Plywood water proof * Usage : container flooring replacement or other out door purposes * Face / Back using Red Meranti Veneer * Mix hardwood Core , high density * 2 times hot pressed * WBP Water resistant Glue * Common Size 28mm x 1220mm x 2440mm = 12 pcs / m3 * MOQ = Loading in 40 ft approx 576 pcs *** Proper use cycling usage time more than 10 times * Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost
Titanium bolts, stainless steel pipe fittings, titanium flanges, stainless castings, threaded rods, cam lock couplings, roller chains & chain wheels, big fasteners, alloy parts, high temperature pipe, such 310s, haste alloy c 276,304,316l, and so on..
Chain Diameter: 1/2~Marine Anchor Chain2 inches Proof load of Grade1: 165.60~460.00KN Breaking load of Grade1: 333.00~926.09KN Proof load of Grade2: 234.20~648.80KN Breaking load of Grade2: 467.50~1239.60KN Approx. Mass(27.5m): 93.50~1650.00KG Standard:U1,U2& U3 Material:High carbon steel Structure:Welded Size:17.5mm - 130mm
The main range of products supplied onto the market includes: pickled and marinated vegetables, salads, horsher a dish, purees, as well as olives, beets. compotes, I am s and roasted apples. We offer also ready to eat meals, chilled soups and ambient soups with long shelf life.
Frozen and fresh cuttlefish, indian mackerel, ribbon fish , yellow tail scad , silver pomfret, chinese pomfret, black pomfret , yellow croaker, silver croaker , tt croaker , reef cod, tilapia , yellowfin tuna , skipjack tuna, bonito tuna, sea caught tiny shrimps, sea caught white shrimps , sea caught brown shrimps , sea tiger shrimps , vannamei shrimps, black tiger , squid , cuttlefish whole.
Application of Anchor The anchor is an equipment used when vessel is approaching to port or harbor. The anchor is tied on the iron line on board and put into the seawater to help the vessel in stability and security. Various kinds of anchor are sold, such as marine anchors, Hall anchor, Foldable Anchor, mushroom anchor, triangle anchor, admiralty Anchor, Speke anchor, HHP stockless anchor, Danforth anchor, etc.
ZB0102 Product description Specification of stainless steel yacht accessories bow roller Zhibo accepts customized logo, packing as well as design ! Features of bow roller for anchors 1. shining look, smooth surface 2. Friction-free surface to make dropping and weighing anchor easier. Won't damage the deck of topsides. Allows you to safely stow anchor while cruising and deploy at short notice. 3. Constructed of 316 stainless steelï¼? anti rust and can keep good performance on resistance of corrosion. 4.Range of rollers to fit the most common combinations of anchor,mounting style and boat.
1.Standard length is 27.5m per piece, we also can produce and cut anchor chains according to your requirement . 2. Material: alloy steel, generally including G30/G40/G60/G70/G80 , or according to your requirement 3. Grade : U2&U3 stud link anchor chains 4. Surface treatment: self color, black painted, zinc galvanized, hot dip galvanized or according to customer's requirement. 5. The tension breaking load conforms to National Standard. 6. Studlink/Studless anchor chains. Specification: 30-162mm, mainly adapt to vessels,marine. 7. CERTIFICATE: KR,ABS,LR,BV,NK,GL,DNV,RS,IRS,CCS;
1.Standard length is 27.5m per piece, we also can produce and cut anchor chains according to your requirement . 2. Material: alloy steel, generally including G30/G40/G60/G70/G80 , or according to your requirement 3. Grade : U2&U3 stud link anchor chains 4. Surface treatment: self color, black painted, zinc galvanized, hot dip galvanized or according to customer's requirement. 5. The tension breaking load conforms to National Standard. 6. Studlink/Studless anchor chains. Specification: 30-162mm, mainly adapt to vessels,marine. 7. CERTIFICATE: KR,ABS,LR,BV,NK,GL,DNV,RS,IRS,CCS;
1.Standard length is 27.5m per piece, we also can produce and cut anchor chains according to your requirement . 2. Material: alloy steel, generally including G30/G40/G60/G70/G80 , or according to your requirement 3. Grade : U2&U3 stud link anchor chains 4. Surface treatment: self color, black painted, zinc galvanized, hot dip galvanized or according to customer's requirement. 5. The tension breaking load conforms to National Standard. 6. Studlink/Studless anchor chains. Specification: 30-162mm, mainly adapt to vessels,marine. 7. CERTIFICATE: KR,ABS,LR,BV,NK,GL,DNV,RS,IRS,CCS;
Hyston mechanical industry co., limited provide kinds of marine anchor, The ac- 14 anchor is one of the most versatile of the high holding power anchor. It is used both in shipping and in the aquaculture industry. The ac- 14 is available in a self colored finish or in a galvanized finish. Ac- 14 anchors are stock less anchors and are available as a standard anchor or as the fully balanced anchor type.
Copper cathode, copper wire scrap, sunflower oil, soybeans seeds, used rails, palm oil, urea 46% nitrogen granular, white corn, sisal fiber, cashew nut, sesame seed, hardwood charcoal, a4 paper icumsa 45 sugar, wood pellets, paper scrap, used engines, yamaha cardboard engines, pet bittle scrap, almond nuts, pistachio nuts, battery scrap, computer scrap, phone scrap, beef meat, goat meat, lamb meat, wet salted cow, cocoa, arabica coffee.
>High quality steel Casting 100kgs to 3500kgs Marine ship U.S.Navy stockless anchor for boat 1. Type: U.S.Navy stockless anchor 2. Material: Casting Steel 3. Nominal Weight: 60kg to 25000kg 4. Certificate: ABS, BV, CCS, DNV-GL, LR, KR,NK, RINA, RS 5. Surface Treatment: Black Painted or Galvanized >Our company Established in 2009,Jiangsu Aohai specializes in the production of marine equipment.An investment of 998 million RMB has recently been prepared to build a state of the art factory. The first phase of development includes an area of 180,000 m2,with about 500 staff,including engineers,project technicians and administration personnel.
