Calcined Anthracite coal is produced when Anthracite is calcined under the temperature of 1240 in vertical shaft furnaces, mainly used in electric steel ovens, water filtering, rust removal in shipbuilding and production of carbon material. Specification of carbon raiser: FC: 85% 88% 90% 91% 92% 93% 94% 95% Sulfur: 0.3% Ash: 3.5% 4.5% 5.5% 6.5% 8.5% 11.5% VM: 1.5% Moisture: 0.5% Size: 1-3mm, 1-4mm, 1-5mm
Product Description Using calcined anthracite coal carburizing agent and cast iron using carburizing agent steel, and other materials are also useful for adding to the carburant carburant is applied, steelmaking, iron carbon materials. High quality carburizing agent is essential to producing high quality steel auxiliary additives. Usage: For 1-5 T furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. which can make carbon additive fully absorbed. For greater than 5 T furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.
Anthrachite comes from very old coal, has a very high level of hardness and high fixed carbon, so it can be used in metal casting. The product price listed is the price / Ton (1000 Kg), Minimum Purchase 1 Ton.
We've got any kind anthracite coal with any specifications. As regards steam coal, we also got many mines in Ukraine and Russia.
Anthracite coal can be as the water filter media to soften the water hardness, but also can be as the fuel to provide heat for metal industry.general enterprises and various types of boiler for heating, the number of large and scattered, coal accounts for about 30% of the steam coal. It is mainly for sintering and injection in the blast furnace using anthracite, its dosage is less than 1% of power coal.
G-high calcined anthracite is produced when anthracite is calcined under the temperature of 1240¡ãc in vertical shaft furnaces. G-high calcined anthracite is mainly used in electric steel ovens, water filtering, rust removal in shipbuilding and production of carbon material. Specifications: Gh-cac-1 Fc(fixed carbon) 95% min, ash 4.0% max, vm(volatile matter) 1.0% max, s(sulphur)0.3% max, moisture 1.0% max Gh-cac-2 Fc(fixed carbon) 93% min, ash 5.5% max, vm(volatile matter) 1.5% max, s(sulphur) 0.3% max, moisture 1.0% max Gh-cac-3 Fc(fixed carbon) 90% min, ash 8.0% max, vm(volatile matter) 2.0% max, s(sulphur 0.5% max, moisture 1.0% max Size 1-3mm, 1-4mm, 1-5mm, 4-10mm, or at customers'option. At customers'option
Specifications: Size : 0-15 mm Total moisture (as received): 8% max Ash (dry basic) : 36% max Volatile matter (dry basic) : 8% max Sulphur (dry basic) : 0.6% max Calorific value (dry basic) : 5200-5500kcal/kg . Quantity & Price: MOQ 15000 MT Price:USD 67.00 per metric ton, FOB Campha port, Vietnam.
Taixi anthracite coal Taixi Anthracite Coal with the following specifications: 1) A.Size:8-30mm,10-30mmú¼ B.Moisture: 5%Max.(on receive basis) C.Ash: 7.0% Max.(on dry basis) D.Sulphur:0.4%Max.(on dry basis) E.Volotile Matter:9.0% Max.(on dry basis) F.Caloricity:7500Kcal/KG(Min.) 2)A.Size: 18-40mm and 25-60mm ,30-80mm B.Moisture: 5%Max.(on receive basis) C.Ash:7-8 %Max.(on dry basis) D.Sulphur:0.5%Max.(on dry basis) E.Volotile Matter:9-9.50%Max.(on dry basis) F.Caloricity:7500Kcal/KG(Min.) 3) A.Size:0-6mm,0-13mm, B.Moisture: 8%Max.(on receive basis) C.Ash: 7-8.0% Max.(on dry basis) D.Sulphur:0.5%Max.(on dry basis) E.Volotile Matter:9.0% Max.(on dry basis) F.Caloricity:7500Kcal/KG(Min.) In bulk and super bag
We are direct to major coal miners for the supply of RB1, RB2, RB3 and Anthracite Coal. Available FOB Richards Bays and FOT in any quantity or specification you are looking for in South Africa Origin.
Type F.C Sulphur V.M Ash Moisture %(min) %(max) SQA-CAC-95 95 0.25 1.0 4.0 0.5 SQA-CAC-94 94 0.25 1.0 5.0 0.5 SQA-CAC-93 93 0.3 1.0 6.0 0.5 �·�·�· �·�·�· Size According to customer's requirement Packing: 1MT bags Or 25kg bags Or accroding to customer's requirement Supply Ablility: 4000MT per month
Product properties 1high purity - control the consistency of raw material from the mine resource. - introduce automatic whole-process equipment to ensure product consistency. 2 good performance - increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3fine classification - various product category, to provide customized carbon raising scheme 4cost-saving - reduce the usage amount of iron, increase scrap consumption, and save raw material cost. How to use 1for 1-5 t furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. Which can make carbon additive fully absorbed. 2for greater than 5 t furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.
we are offering high quality Anthracite Coal that is used as a fuel in various industries. Offered coal is processed by making use of advanced techniques in compliance with the defined international industry standards. We test this coal on different parameters of quality to ensure its purity. This Anthracite Coal is extensively used in different industries like chemical, oil, power, thermal & gas, cement, steel, etc. Features: High calorific value Eco-friendliness Optimum purity Long shelf life Anthracite Coal We "Shree Sai Enterprise" is involved in supplying of Metallurgical Grade Anthracite Coal in India.The Anthracite Coal from trusted vendors it has low sulphur and phosphorus contents due to which "Shree Sai Enterprise" has carved a niche for itself as the preferred supply source of coal by leading Ferro Alloys manufactures & Other manufacturers in India. It is generally used in Rolling mills, paper mills and some specific type of foundries to manufacture the different type of products Anthracite Coal finds use as a reductant in Ferro Alloys, Smelters, Steel Plants and Pellet Plants etc. The Low Grade Coal on the other hand, has been successfully used in Cement Kilns, Sponge Iron Plants and Power Plants. It also makes an ideal blend with high volatile matter thermal coal.
With strong industrial experience, we make sure that the packaging is done as per the stated norms, by this; the products that we deliver are absolutely safe from the getting damaged. We are situated in Johannesburg(South Africa) and our well-developed network assists us in meeting the exact requirements of the clients.
Carbon Additive also called Calcined anthracite Coal, Gas Calcined Anthracite Coal, Carbon Raiser,Recarburizer,etc. The main raw material of our Carbon Additive is Ningxia unique high quality Taixi anthracite, with characteristic of low ash andlow sulfur. Carbon additive has two main usage, fuel and additive. When being used as the carbon additive of steel-smelting, and casting, the fixed carbon may achieve above 95%. Best quality Taixi anthracite as raw materials through high temperature calcined at 800-1200 â?? by the DC electric calciner with results in eliminating the moisture and volatile matter from Anthracite efficiently, improving the density and the electric conductivity and strengtheningthe mechanical strength and anti-oxidation, It has good characteristics with low ash, low resistivity, low carbon and high density. It is the best material for high quality carbon products, it is used as carbon additive in steel industry or fuel.
Description: Mineral Coal Anthracite Country of origin: Peru Qty: 28,000 MT per dispacth (224,000 MT year) 55,000 MT since third dispatch (385,000 MT year) Port of loading: Chimbote Presentation: Bulk Unit FOB Price: US$ 175.00 / MT Contract: Two years or more Payment terms: Irrevocable, Confirmed, and Divisible Letter of Credit, payable at sight QUALITY SPECIFICATIONS: Total Moisture (%): 0 â?? 10% Ash (%): 0 â?? 11% dry Volatile Matter (%): 0 â?? 6.5% dry Sulphur (%): 0 â?? 0.8% Fixed carbon (%): 80% Gross Calorific Value (kcal/kg): 6300 - 7800 Granulometrics: 15 to 50 mm (2â??)
For the calcined anthracite, fob 320-420usd tianjing port, quotation is valid utill this month, perment term is t/t. But the cost might be different at different purchasing date, so we need to check and update the offer for u again that day when u confirm order date exactly later, please be noted. The calcined anthracite coal is through high temperature treatment and screening, uniform particles, is one of the ideal materials for carburizer and electrode paste. In China, anthracite is usually calcined in electric calciners, rotary kilns and pot furnaces, and the anthracite produced in electric calciners is called as electrically calcined coal (ECA for short) while the anthracite produced in other two calciners is called as gas calcined coal (GCA for short). Electrically calcined anthracite coal, Electrical forging material is made from high-quality anthracite and during calcining, the temperature up to 2000 By calining the high-qualityanthracite, the Coal lattice is hanged Then the anthracite becomes half graphitization. Then the material can meet many demands by changing its physical and chemistry character The specification. Due to it is low in volatile matters, good in thermal and electrical conductivity with the powder resistivity about 600 and mainly used in carbon bricks, electrode pastes and cathode carbon blocks with certain requirements for electrical conductivity. Moreover, the proportion and particle size of ECA in such products vary depending on the situation of different enterprises. The calcination temperature of GCA is about 1200 and its electrical conductivity is far inferior to that of ECA, but the sulfur content of anthracite is usually 0.3-0.5%. GCA is widely used in steel and foundry industry as coal recarburizer by virtue of its higher cost performance. We have established a long-term cooperative relationship with anthracite plants in Vietnam. We also provide calcined anthracite coal and dried anthracite coal from Vietnam: Calcined Anthracite Coal FC 95% ASH 4% S 0.5% FC 92% ASH 6.5% S 0.5% Dried Anthracite Coal FC 85% Ash 11% VM 4% S 1% MO: 5% FC87% Ash7 VM 7% S 0.65 MO:5%
1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2), Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3), Fine classification - Various product category, to provide customized carbon raising scheme 4), Cost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost. For 0-5 T furnace use: While a small amount molten iron in the furnace Or with some molten iron remained. add the carbon additive one-time Then add the other material Which can make carbon additive fully absorbed. For greater than 5 T furnace Mix proper carbon additive with charging material as suggested first, And then along with the increase of furnace charge down into the furnace inside gradually. That is, before the molten metal rising up to about 2/3 height of furnace All carbon additive shall be added It guarantees sufficient melting absorbing time before molten metal out, and improves the absorption of carbon.
Coal, steam coal, anthracite, we are the supplier, 3800-8300kcal/kg, Call us if you need longterm and strong suppling, please, by
We would like to offer you our Indonesian Anthracite and Coking Coal Coal with below detailed specifications based on ROA (Report of Analysis): TM (Total Moisture) = 5.74% ASH (Ash Content) = 2.52% VM (Volatile Matter) = Anthracite Coal 10% Max and Coking Coal 20% Min FC (Fixed Carbon) = 85.54% TS (Total Sulphur) = 0.58% CV (Caloric Value) = 8332 adb CV (Caloric Value) = 7979 ar CV (Caloric Value) = 8687 daf RM for HGI = 1.45% HGI Index = 99 Monthly Capacity = 70,000 - 100,000MT Per Month Payment Terms and Conditions: A. T/T Telegraphic Bank Transfer 50% Advance Deposit against Proforma Invoice of Total Contract Value to handle Production, Pre-Shipment and Logistic Expenses after mutual SPA Contract is signed. B. T/T Telegraphic Bank Transfer 50% Remaining Balance of Individual Shipment Value per item after receiving official SGS Inspection Report before shipment.
We offer Coking coal, Steam coal, Anthracite coal, Thermal coal Russia origin, direct from the mining factories. Different specifications, according to buyer's request. Payment method 100% LC