1 Sterile Low Dead Space (Lds) Medical Syringes Suppliers and Manufacturers

SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which won't cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 5, The output voltage can be set between -40% to +20% of rated voltage. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 300-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 12, European CE (EMC, LVD, UL1741) and ISO9001 certificates.

Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 12, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 13, Solar controller adopt IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 14, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 15, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 16, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 17, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. 18, The controller also has temperature compensation function and RTC real time clock function,

Insulin Syringe Product Code: MED 178 Specifications: Sterile, individually packed in Medical Grade Blister & Ribbon Pack Size/Strength: 1ml 40U â?? Insulin, 1ml 100U â?? Insulin, Needle 29G-31G Description Non-Toxic, Non-Pyrogenic and Sterile Single use Latex free needle,Low Dead expose Needle is 20% thinner in diameter (31 G) for lesser penetration force in skin Available in 6mm length and 8mm length

We are manufacturing syringes, IV sets and vacuum blood tubes with CE, ISO 13485 and ISO 9001. Our production capacity is wide and our syringe volumes are 1ml, 2 ml, 5 ml, 10 ml, 20 ml and 50 ml with any type of hypodermic needles. All our productions are accredited by notified bodies and suitable for European and African market.

Sterile Hypodermic Single Use Syringe Product Code: MED 177 Specifications: Sterile, individually packed in Medical Grade Blister & Ribbon Pack Size/Strength: 1ml, 2ml, 3ml, 5ml, 10ml, 20ml & 50ml Description Non-Toxic, Non-Pyrogenic and Sterile for Single use. Compatible with all medications, transparent & smooth sliding plunger Latex Free Elastomer Gasket. Luer Mount with or without needle Ultra-Sharp Needle ensuring minimum pain Manufactured as per ISO 7886 standard

Disposable Syringes Insulin Syringe Single Use Syringe Leuer Lock Hypodermic Syringe

Our medical syringes are all made of high quality, sterile, nontoxic, and pyrogen free materials. We provide auto disable (AD) syringes as well regular single use syringes. AD syringes prevent re-use and thus the transmission of diseases. Its integrated needle is an important feature of the non-dead-space design, which reduces waste of medication to a minimum. AD syringes are equipped with the Terumo lancet point needle which guarantees unsurpassed needle quality and minimal patient trauma. Its usage is the same as common syringe but with easy and smooth drug injection. Specification: * 1mL, 2mL, 3mL, 5mL, 10mL, 20mL, 30mL, 50mL with or without needles * Luer slip or luer lock * CE/ISO/FDA approved * Sterile, nontoxic, pyrogen free * For single use * High quality, reasonable price Features: * Quality certificates: CE0197/WHO/FDA/ISO9001/ISO13485 * OEM/ODM, clients' design is welcome * Sterilized by EO gas, sterile, nontoxic, pyrogen free, single use only * Easy readings with accurate and clear scale markings * 5-year shelf lifespan * Barrel and plunger: high transparent medical grade PP, piston: latex free * Individually packing: PE bag (polybag) or blister packaging * Free sample available * Application: Vaccine injection(Covid-19, BCG, Hepatitis B and so on), AIDS injection

General Characteristics Single-use Sterile Including a mechanism to prevent reuse The syringe and needle shall be passively and automatically rendered unusable by the delivery of the intended fixed dose. And/ Or The auto-disable feature is automatically activated and remains effective from the time that the injection is commenced. And / Or The auto-disable feature is automatically activated on completion of the delivery of the intended fixed dose. Type and application Non-pre-filled, disposable. To administer DTP, DT, tetanus toxoid and diluted freeze dried measles etc for intramuscular and sub-cutaneous injection. Syringes with permanently attached needle Material Polypropylene with or without stainless steel Syringe size with pre-set volume and single marking 0.5ml for immunization (+20% to allow for removal of air) Graduation and accuracy Two markings only: 0 and 0.5ml. The difference between the maximum graduated volume and the expelled volume of distilled water shall not be greater than �± 25 micro-liters. Needle for Immunization · Diameter : 23G Length : 25mm (1) Stainless steel needle tubing for the manufacture of medical devices Needle shall confirm to IS 10654 of 2002 (third revision) equivalent ISO 7864 of 1993 Needle fixing Fixed capped, needle (23 G X 25 mm). Fixed needles should withstand an axial pulling force of 34N without separating from the syringe. If accidental needle stick protection devices are included in the design of the syringes or needle, they should not compromise the ease of use or the performance of the syringe. Leakage : Leakage of distilled water at a pressure of 0.3 mPa (3 atmospheres) for six minutes shall not be greater that 50 micro-liters. Dead space The maximum dead-space shall be 50 micro-liters. Self destruction The syringe shall be automatically rendered unusable when it has delivered a 0.5 ml dose of vaccine or distilled water. Filling The syringe is filled by inserting the needle through the septum of a sealed vaccine vial.

Product Name: Medical Syringes Specifications: 1) 100 Million Sterile, 1ml Syringes with needles made up of the following Gauge : 50 Million 25G with 1 needles 25 Million 23G with 1 needles 25 Million 23G with 1.5 needles 2) 100 Million Sterile, 3ml Syringes with needles made up of the following Gauge : 50 Million 25G with 1 needles 25 Million 23G with 1 needles 25 Million 23G with 1.5 needles 3) 30 Million Sterile, 5ml Syringes with needles made up of the following Gauge : 15 Million 25G with 1 needles 7.5 Million 23G with 1 needles 7.5 Million 23G with 1.5 needles Quantity Available : 300 Million pcs. Shipping Terms : FOB Payment Terms : 100% L/C Looking for Buyers From : Worldwide

Product Name: Sterile Insulin Syringes Certificates: CE (Already Shipping to European Countries) Specifications: 1ml Syringes: 30 Million Syringes with 25G needles (1" length), Location : India 30 Million Syringes with 23G needles (1" length), Location : India Quantity Available : 60 Million pcs. Shipping Terms : FOB Payment Terms : 100% L/C, Irrevocable, Divisible, and Non-Transferable Looking for Buyers From : Worldwide

Name of the product Teremo 3-part tuberculin syringe with mounted needle, sterile, for single use (Ref: 3TS-1ML) Teremo 3-part insulin syringe with integrated needle, sterile, for single use (Ref: 3IS-1ML) Product characteristics Needle Hub and protector : Medical class polypropylene Cannula : Stainless steel Size : 29Gx1/2 (0.33 x 13 mm) Syringes are not resistant to UV radiation. Needles are coated with silicone to have good sharpness and for protection of the needle. Syringes Material barrier: : Polypropylene (PP) Plunger : Polypropylene (PP) Piston : Isoprene (Latex-Free) Sizes : 1 ml Graduation 3TS-1ML : 0.02 ml Graduation 3IS-1ML : 0.025 ml Tooling parameters for raw materials Limit for extractable metals : Total £ 5 ­g/ml, Cd 0.1 ­g/ml Limits for acidity or alkalinity : pH £ 1 pH Oxidized material : KMnO4 consumption 0.5 ml Method of sterilization : EtO gas Non-toxic, non-pyrogenic This product is intended to be used for hypodermic injection and fluid drawing. If the single package is opened before use, discard it immediately and do not use it. Take care not to contaminate the product during unpacking. The product is limited for single use and after use it must be discarded immediately. The product remains sterile for a period of 5 years after sterilization, provided that it is kept under specified storage conditions. Do not use after expiry date Product is phthalates and latex-free. Packing Per piece in sterile blister packing, 100 pieces in an inner box, 32 inner boxes in an export carton

Name of the product ROMED 3-part tuberculin syringe with mounted needle, sterile, for single use (Ref: 3TS-1ML) ROMED 3-part insulin syringe with integrated needle, sterile, for single use (Ref: 3IS-1ML) Product characteristics Needle Hub and protector : Medical class polypropylene Cannula : Stainless steel Size : 29Gx1/2 (0.33 x 13 mm) Syringes are not resistant to UV radiation. Needles are coated with silicone to have good sharpness and for protection of the needle. Syringes Material barrier: : Polypropylene (PP) Plunger : Polypropylene (PP) Piston : Isoprene (Latex-Free) Sizes : 1 ml Graduation 3TS-1ML : 0.02 ml Graduation 3IS-1ML : 0.025 ml Tooling parameters for raw materials Limit for extractable metals : Total £ 5 ­g/ml, Cd 0.1 ­g/ml Limits for acidity or alkalinity :³ pH £ 1 pH Oxidized material : KMnO4 consumption 0.5 ml Method of sterilization : EtO gas Non-toxic, non-pyrogenic This product is intended to be used for hypodermic injection and fluid drawing. If the single package is opened before use, discard it immediately and do not use it. Take care not to contaminate the product during unpacking. The product is limited for single use and after use it must be discarded immediately. The product remains sterile for a period of 5 years after sterilization, provided that it is kept under specified storage conditions. Do not use after expiry date Product is phthalates and latex-free. Packing Per piece in sterile blister packing, 100 pieces in an inner box, 32 inner boxes in an export carton

Disposable Syringes and Needles manufactured by the largest producer of syringes in South Korea, the same manufacturer that produces syringes for the well-known brand (e.g., BD). Each syringe comes already sterilized and assembled with the needle, the perfect setting to simplify injection procedures for healthcare workers. These syringes met the highest quality standards and are an ideal instrument for the inoculation of COVID-19 vaccines. We have a long-term production contract with the Korean manufacturer for a total of 40 million pieces per year. We import on a weekly basis in the US around 1 Million pieces of different sizes (1ml / 3ml / 5ml). We have ready stock (around 5 million pieces) in the US in our Los Angeles warehouse for immediate purchase (prices for ready stock in the US, start from $0.11 depending on the amount) Below the technical description of the product: * Luer Slip / Luer Lock * Syringes volume: 1ml / 3ml / 5ml (other size available) * Needle Gauge: 23G or 25G * Needle length: 1 inch or 1.5 inch * Graduation 0.1/0.01ml * Sterile * Already assembled * South Korean Production

** WAREHOUSE CLEARANCE - STOCK IS OTG IN CHINA READY TO SHIP IMMEDIATLEY** 1ML Luer Slip 25G 1" 1ML Luer Slip 23G 1" 1ML Luer Lock 25G 1" 1ML Luer Lock 23G 1" Numedico Technologies is the manufacturer of a range of traditional | Standard syringe supplies. We use high-quality cannulas for increased patient comfort. Numedico�??s Everyday standard syringes are available in a range of sizes and we can deliver worldwide. Hypodermic Syringes for single use with or without needle Available as Luer Lock Luer Slip Fixed Sizes 0.5 -50 ml Low dead space Made of Polypropylene/Polyisoprene Highly transparent barrel High contrast black graduation Safe plunger backstop Latex-free Blister paper packed | EO Sterilization Certification: CE Marked , FDA Approved, US 510k approved , International ISO standards 13485, ISO 7864-4

Sterile insulin syringe for single use ( with needle) Sizes: 0.5ml, 1ml. SPEC: U-40, U-80 Product structure: barrel, plunger, piston, and sterile hypodermic needle Product instruction: The products are made by medical polymer materials. Sterilized by EO gas; sterile, non-toxic, pyrogen free. The needles on barrels are dead space, without residual volumn, ultra thin wall needle cannula, highly sharp needle point, clear and accurate graduation. This makes easy identification, no counting and accurate medication dosage. And the double-wall sealed package makes easy bringing safe use. Technical indication: in accordance with GB15810 Scope for use: The products are used for the injection of insulin drug.