1 Quart Sharps Container Suppliers and Manufacturers

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.

This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

Suitable for 1 water/ juice/sauce etc 2 shampoo/wash detergent etc

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact

FINNA SAMBAL IJO 18G x 100 SACHETS 1 CARTON : 10 PACKS 1 PACK : 10 SACHETS 1 SACHET : 18 GRAM MIN. ORDER : 1x20FCL or 4000 CARTONS *we accept mix. container order

Size:1200*1000* 1160mm / 1060L Net weight:60KG + 1KG Strong, durable and corrosion resistant

SOSRO TEA 450ML x 24 PET BOTTLES QTY/20F : 1200 CARTONS MIN. ORDER : 1x20F *WE ACCEPT MIX CONTAINER ORDER*

KOKOLA MALKIST OLEZZ STRAWBERRY 100G x 30 BISCUIT CRACKERS QTY/20F : 1300 CARTONS MIN. ORDER : 1x20FCL *we accept mix container

HERBAL DRINK IN CAN ADEM SARI CHINGKU 320ML x 24 FLAVOUR : LEMON, SPARKLING LEMON, TEA QTY/20F : 2200 CARTONS , MIN. ORDER 1x20FCL *we accept mix container order*

Nutrijell Jelly Powder 15g, Variant : 1. Nutrijell Melon 2. Nutrijell Plain 3. Nutrijell Lychee 4. Nutrijell Strawberry Key Specifications/ Special Features : Food And Beverages, Jelly Powder, Instant Jelly Product Origin : Indonesia Minimum Order : 1x20'F

TimTam Smooth & Crunchy 105g, Variant : 1. TimTam Milk Chocolate 2. TimTam Vanilla 3. Timtam Strawberry 4. TimTam Cappuccino Key Specifications/ Special Features : Food And Beverages, Biscuit, Wafer Product Origin : Indonesia Minimum Order : 1x20'F

Marina Body Lotion 100ml, Variant : 1. White Bengkoang 2. Happy 3. Lovely Product Origin : Indonesia Key Specifications/ Special Features : Personal Care, Body Lotion, Skin Care Minimum Order : 1x20'F

So Klin Floor Cleaner 900ml: Product Description : So Klin Floor Cleaner 900ml. Variant : 1. Floral Lavender 2. Ice Pine 3. Marine Mine 4. Citrus Lemon 5. Rose Bouquet. Packaging Details : 900ml x 6 Product Origin : Indonesia Key Specifications/Special Features : Household chemical, floor cleaner, freshener Minimum Order : 1x20'F

So Klin Floor Cleaner 450m: Product Description: So Klin Floor Cleaner 450ml. Variant : 1. Floral Lavender 2. Ice Pine 3. Marine Mine 4. Citrus Lemon 5. Rose Bouquet Packaging Details : 450ml x 12 Product Origin : Indonesia Key Specifications/Special Features : Household chemical, floor cleaner, freshener Minimum Order : 1x20'F