02250137-895 Oil Separator Element for Sullair Screw Air Compressor Repair Part LS10-40HP.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
100007587 Oil Separator Element for Compair Screw Air Compressor Spare Parts L37KW 100013002.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
OEM 88290019-362 For Sullair Air-Oil Separator Screw Air Compressor Parts.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Unatex air compressor 0220701005 0220610001 oil filter 0220101021 Air filter.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Description: Vzen Hydraulic Oil HLP are high performance premium quality hydraulic oils. They are blended from highly refined, high viscosity index Group II plus base oils with carefully selected balanced antiwear additive. These oils are designed to operate over a wide range of working conditions including low load and severe high load conditions. They provide outstanding protection and performance in manufacturing and other operations. Formulated for excellent water separation, exceptional hydrolytic stability, anti-foam characteristics and cleanliness they allow efficient operation of the system. These oils have Superior moisture handling capability ensures longer life and reduces the risk of rusting and corrosion. Vzen Hydraulic Oil HLP are compatible with seal materials and paints normally specified for use in hydraulic systems with mineral oils.
Item: Prepainted galvanized steel coil /sheet thickness: 0.12mm-2.8mm width: 750-1250mm (like750,762,900,914,1000,1200,1219,1220,1250mm) length: coiled or as requested zinc coating: Z40 - Z275g/m2, material: SGCC, SGCH, SPCC, SGCD, DX51D,DX51D+Z surface treatment: chromed / oiled /slightly oiled/ dry spangle: minimized spangle / regular spangle/ big spangle coil ID: 508mm or 610mm coated: by RAL No. as your required coil Weight: 3 - 5 ton,6-8 tons packing standard: export packing 20 feet containter max weight 27.5mt MOQ: one 20ft container-27.5mt payment Term: 30% prepayment T/T, L/C at sight or other payment terms delivery time: 15-25 days
Item: Hot dipped galvanized steel sheet coil thickness: 0.12mm-3.0mm width: 750-1500mm (like750,762,900,914,1000,1200,1219,1220,1250mm) length: coiled or as requested zinc coating: Z40 - Z275g/m2, material: SGCC, SGCH, SPCC, SGCD, DX51D,DX51D+Z surface treatment: chromed / oiled /slightly oiled/ dry spangle: minimized spangle / regular spangle/ big spangle coil ID: 508mm or 610mm coated by: zinc coated coil Weight: 3 - 5 ton,6-8 tons,8-10 tons packing standard: export packing 20 feet containter max weight 27.5mt MOQ: one 20ft container-27.5mt payment Term: 30% prepayment T/T, L/C at sight or other payment terms delivery time: 25-30 days
Description VZEN IND II is a premium quality fuel oil for Industrial Application. VZEN IND II is a super refined double filtered fuel oil manufactured using thin-film technology to give better performance and prevent sludge formation. VZEN IND II is specially developed for highly sensitive boilers, heaters, furnaces, and all types of industrial heating application. It is the finest quality heating fuel available in India. It is also known as Heating Oil or Boiler Oil. VZEN IND II highly recommended for the Food Industry. Our range of all products is widely appreciated by our clients.
Auto care products anti puncture gel, puncher proof gel, puncher liquid, anti puncher liquid, tyre sealant, tyre gel, refresh tyre sealant, global tyre gel, puncher pro tyre sealant, engine oil for byke & car, car air compressor, car liquid cleaner, car polish, dashboard polish, tyre polish, and engine coolant..Manufacturer.
Homeopathic bottles, homeopathy bottles, chemical container, square seal container, hdpe bottles premium cosmetic container, ayurvedic container, double wall cream jars, cosmetic cream jar, chemical bottles, chemical packing bottles, square chemical bottles, homeopagthic bottles, homeopathic pill bottles, plastic dropper bottles, hair oil bottles, shampoo bottles, 1 dram bottles, pp bottles, pp reagent bottles, lab chemical bottles.
The fuel rail sensor, commonly referred to as the Fuel Pressure Sensor, it is installed at one end of the oil rail to measure the fuel pressure in the common rail pipe. The sensor is a part of vehicles fuel system and designed to monitor the fuel pressure that is present at the fuel rail.It sends this signal to the ECU, which then uses it to make adjustments to the vehicle s fuel and timing. When the sensor has an issue it can cause problems with the performance of the vehicle. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor .1089-0575-26 Pressure Sensor For Atlas Copco Air Compressor Spare Part 1089057526
39875539 Pressure Sensor for Ingersoll Rand Air Compressor Replacement Pressure Transducer 24571309 5VDC.The fuel rail sensor, commonly referred to as the Fuel Pressure Sensor, it is installed at one end of the oil rail to measure the fuel pressure in the common rail pipe. The sensor is a part of vehicles fuel system and designed to monitor the fuel pressure that is present at the fuel rail.It sends this signal to the ECU, which then uses it to make adjustments to the vehicle s fuel and timing. When the sensor has an issue it can cause problems with the performance of the vehicle. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor .
1089057412 1089-0574-12 Air Compressor Temperature Sensor for Atlas Copco.The fuel rail sensor, commonly referred to as the Fuel Pressure Sensor, it is installed at one end of the oil rail to measure the fuel pressure in the common rail pipe. The sensor is a part of vehicles fuel system and designed to monitor the fuel pressure that is present at the fuel rail.It sends this signal to the ECU, which then uses it to make adjustments to the vehicle s fuel and timing. When the sensor has an issue it can cause problems with the performance of the vehicle. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fuel Pressure sensor,Fuel high Pressure sensor .
Preset (autom. paper size and thickness setting) - CPC 1.04 + CPtronic - Machine control and diagnosis console (Remote inking; dampening; axial, circumferential and diagonal register control with light pen; day light illuminator and memory card for job memories) - Programmable automatic blanket cylinders wash up - Programmable automatic impression cylinders wash up - Programmable automatic rollers wash up - Autoplate (semi automatic plate loader) with Bacher Control 2000 register system (425mm) - Chromed impression cylinders - Chromed plate cylinders - Chromed blancket cylinders - Pneumatic compressors - Powder sprayer device - Low pile - Automatic sheet de-curler - 2 delivery trolleys - Minuss version (Not prepared for numbering) - Oil drip pan, Tools, Documentations - Complete with all standard parts and accessories - plate punch and bender
A&S Construction Machinery Co., Ltd. supplies all types of Power take off (PTO). All the brands of PTO we can provide: VOLVO PTO, BOBCAT PTO, HYUNDAI PTO, etc.. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.. Contact Us A&S Construction Machinery Co., Ltd.
A&S Construction Machinery Co., Ltd. supplies all types of transaxles. All the brands of transaxles we can provide: JOHN DEERE transaxles, BOBCAT transaxles, KAWASAKI transaxles, MITSUBISHI transaxles, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, solenoid valves, solenoid coils, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, reducers, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, switches, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.. Contact Us A&S Construction Machinery Co., Ltd.
A&S Construction Machinery Co., Ltd. supplies all types of switches. All the brands of switches we can provide: CAT switches, KOMATSU switches, JOHN DEERE switches, SANY switches, XCMG switches, VOLVO switches, HITACHI switches, SUMITOMO switches, LIEBHERR switches, DOOSAN switches, CASE switches, BOBCAT switches, KUBOTA switches, YANMAR switches, HYUNDAI switches, DAEWOO switches, etc. For other parts of the brands above we can also provide cylinder liners, crankshafts, oil pumps, fuel injectors, batteries, radiators, compressors, gaskets and seals, mufflers, manifolds, turbochargers, hydraulic pumps, hydraulic motors, hydraulic valves, hydraulic couplers, bearings, bearing seats, gears, pulley, sprocket, coupling, drive shaft assembly, brakes, clutches, drive chains, actuators, alternators, cables, controllers, distributors, fuses and relays, harnesses, sensors, gearcases, filters, counterweights, heater and A/C accessories, belts, etc.
Tomato paste 720g jars 24% concentration Tomato paste obtained from tomato concentrate, with added salt Soluble dry substance (exclusive of added salt), % refractometric degrees, at 20�ºC, minimum 24%. Pasteurized product. Ingredients: tomato concentrate, water, salt max. 2%. Net quantity: 720 g e Store in clean, ventilated rooms, away from sunlight and frost. After opening, keep in the refrigerator, with the addition of a film of food oil over the contents remaining in the container, for a maximum of 15 days. Best before: see the date printed on the cap. Nutritional declaration for 100g product: Energy value: 396 kj/ 94 kcal; Fats: 0.7g; of which saturated fatty acids: 0.0g; Carbohydrates: 19 g; of which sugars: 8.2 g; Fibre: 2.0g, Protein: 3.1 g; Salt: 1.9 g. The origin of the tomato concentrate is: EU and non-EU. Produced in Romania.
Tomato paste 28-30% concentration in 720 g jars Tomato paste obtained from tomato concentrate, with added salt Soluble dry substance (exclusive of added salt), % refractometric degrees, at 20�ºC, minimum 28-30%. Pasteurized product. Ingredients: tomato concentrate, water, salt max. 2%. Net quantity: 720 g e Store in clean, ventilated rooms, away from sunlight and frost. After opening, keep in the refrigerator, with the addition of a film of food oil over the contents remaining in the container, for a maximum of 15 days. Best before: see the date printed on the cap. Nutritional declaration for 100g product: Energy value: 396 kj/ 94 kcal; Fats: 0.7g; of which saturated fatty acids: 0.0g; Carbohydrates: 19 g; of which sugars: 8.2 g; Fibre: 2.0g, Protein: 3.1 g; Salt: 1.9 g. The origin of the tomato concentrate is: EU and non-EU. Produced in Romania.
Tomato paste 28-30% concentration in 580 g jars Tomato paste obtained from tomato concentrate, with added salt Soluble dry substance (exclusive of added salt), % refractometric degrees, at 20�ºC, minimum 28-30%. Pasteurized product. Ingredients: tomato concentrate, water, salt max. 2%. Net quantity: 580 g e Store in clean, ventilated rooms, away from sunlight and frost. After opening, keep in the refrigerator, with the addition of a film of food oil over the contents remaining in the container, for a maximum of 15 days. Best before: see the date printed on the cap. Nutritional declaration for 100g product: Energy value: 396 kj/ 94 kcal; Fats: 0.7g; of which saturated fatty acids: 0.0g; Carbohydrates: 19 g; of which sugars: 8.2 g; Fibre: 2.0g, Protein: 3.1 g; Salt: 1.9 g. The origin of the tomato concentrate is: EU and non-EU. Produced in Romania.
