ULTRA-LOW SULFUR DIESEL 10 PPM (GASOIL 0.001%S) - TECHNICAL SPECIFICATION SHEET Component Acid Number, MG KOH/G Appearance @ 25�°C Ash Content, Mass % Cetane Index Cetane Number Carbon Residue, Mass % CFPP, �°C Cloud Point, �°C Color Conductivity @ 20�°C, PS/M Copper Corrosion 3 HRS @ 50�°C Density @ 15�°C, G/ML Distillation T90 (90% Recovered), �°C Distillation T95 (95% Recovered), �°C Distillation Volume Recovered @ 250�°C Distillation Volume Recovered @ 350�°C Filter Blocking Tendency @ 40�°C, MM2/G Flash Point, �°C Kinematic Viscosity @ 40�°C, CST Lubricity @ 60�°C, Microns Oxidation Stability, MG/L Particulate Matter, MG/KG Polyaromatic Hydrocarbons, Mass 6 Pour Point, �°C Sulfur Content, PPM Water Content, MG/KG Water & Sediment, Volume % Odour Value 0.3 MAX Clear & Bright, Without Undissolved Sediment or Free Water 0.01 MAX 46 MIN 51 MIN 0.2 MAX MINUS 5 MAX MINUS 1 MAX 2.0 MAX 150 MIN 1 MAX 0.82 MIN - 0.845 MAX 360 MAX 65 MAX 85 MIN 2 MAX 61.5 MIN 2.0 MIN - 4.5 MAX 460 MAX 25 MAX 24 MAX 11 MAX 10 MAX 200 MAX 0.05 MAX Merchantable
Drilling Rig Drilling diameter(mm) 75,91,110,130,150,300 Drilling depth (m) 180,150,100,70,50,30 Drill pipe diameter (mm) 42,50 Drilling angle(�°) 90~75 Equipment size(L * B * H) 1750 * 780 * 1273 (mm) Rig weight (except engine) 595 Gyrator Spindle speed (four gear) (r/min) 71,182,310,790 Spindle maximum feed pressure(KN) 15 Spindle maximum lifting force(KN) 25 Spindle maximum output torque(KNâ?¢ m) 1.5 Winch assembly Winch maximum lifting force (single rope) 20 Reel speed (r/min) 20,39,85,170 Reel circumferential speed(m/s) 0.172,0.345,0.738,1.476 Reel diameter(mm) 140 Wire rope diameter(mm) 9.3 Wire rope density (m) 40 Brake diameter(mm) 278 Brake band width (mm) 50 Water pump Pump type Horizontal single cylinder double acting Maximum displacement (motor)(L/min) 95(77) Work pressure (Mpa) 1.2 Cylinder diameter (mm) 80 Piston stroke(mm) 100 The maximum allowable pressure (Mpa) 1.2 Oil pump Oil pump type YBC -20/125 Nominal pressure (Mpa) 12.5 Rated flow(ml/r) 20 Rated speed(r/min) 800-1500 Diesel engine or motor Diesel engine ZS 1115 Rated power (KW) 16.2 Rated speed (r/min) 2200 Rated pressure(Mpa) 11 Motor type Y160 - 4
Low pt-co plasticizer special for medical gloves Plasticizer e01 Description E01 is kind of special plasticizer developed for medical gloves manufacturer which requests low viscosity plasticizer. Comparing to other plasticizers, our product is processed from food grade palm oil, it is eco-friendly plasticizer passed sgs certificate compliance with eu rohs, reach, svhc and bpa regulations. A. Viscosity obviously lower than same item of similar plastic Izer because some pvc products limit to use high viscosity additive B. Good stability, high plasticizing efficiency, combined with main plasticizer dotp, dinp or tbc will not affect finished product quality. C. Good compatibility with pv c raw materials, replace 30% main plasticizer. D. Competitive pric E, reduc es c omposite cost of gloves. Applications 1. Passed sgs certificate compliance with eu rohs, reach, svhc and bpa regulations. 2. Viscosity is 30 cst (40 ?), solve high viscosity limitation problem, not affects settlement behavior of paste resin. 3. High flash point >200 ?, compliance with processing requirements. 4. Good stability, high plasticizing efficency, mix with main plasticizer would not affect gloves quality. Specification Pt-co 60 Acid value(mgkoh/g ) 0.30 Heating decrease volume(125 oc, 2 h) 0.50 Density g/ml(20 oc) 1.00-1.05 Viscosity(mm2/s) 30 Flash point(oc) >200 Price Delivery port : tianjin/qingdao Packaging & delivery Packing :200kg iron drum/20mt flexibag/1mt ibc drum Delivery lead time : within 10-20 days after receiving the deposit Supply ability : 20, 000 ton/year
High Plasticity New Plasticizer Used for Plastic Flooring Plasticizer B02 Description Processed from food grade palm oil, B02 is eco-friendly plasticizer passed SGS certificate compliance with EU RoHS, REACH, SVHC and BPA regulations. a.Good color and low Pt-Co, suitable for various of PVC products manufacture, specially used in colorless and transparent PVC products. b.Good compatibility with PVC raw materials, replace 30% main plasticizer and more percentage could be achieved with main plasticizer DBP, DIBP. c.Normally used in winter due to the low freezing point. d.Good thermal stability, suit able for different PVC products manufacturers. e.Good plasticity, w orks better with main plasticizer such as DOP, DBP, DOTP, etc.. f.Cost effective, i t would be first choice on plasticizer for PVC products manufacturers on condition that ensure products quality. Usage widely used in PVC processing industry, special for plastic flooring, synthetic leathers, flex banner, etc.. Applications 1.Passed SGS certificate compliance with EU RoHS, REACH, SVHC and BPA regulations. 2.Low Pt-Co, suitable for light color or colorless products. 3.High flash point(>200ºC),satisfy processing requirements. 4.Good stability, high plasticizing efficency, mix with main plasticizer not affect products quality. 5.DOTP is main plasticizer in exported PVC floor, A03 could replace more than 50%. 6.Our product could be used in both base layer and medium layer of PVC floor. Specification Pt-Co 60 Acid Value(mgKOH/g ) 0.30 Heating decrease volume(125 oC,2 h) 0.50 Density g/ml(20 oC) 1.04-1.06 Viscosity(mm2/s) 50 Flash point(oC) >195 Price Delivery Port : Tianjin/Qingdao Packaging & Delivery Packing :200kg iron drum/20MT Flexibag/1MT IBC Drum Delivery Lead Time : within 10-20 days after receiving the deposit Supply Ability : 20,000 ton/year
Low pt-co plasticizer special for medical gloves Plasticizer e01 Description E01 is kind of special plasticizer developed for medical gloves manufacturer which requests low viscosity plasticizer. Comparing to other plasticizers, our product is processed from food grade palm oil, it is eco-friendly plasticizer passed sgs certificate compliance with eu rohs, reach, svhc and bpa regulations. A. Viscosity obviously lower than same item of similar plastic Izer because some pvc products limit to use high viscosity additive B. Good stability, high plasticizing efficiency, combined with main plasticizer dotp, dinp or tbc will not affect finished product quality. C. Good compatibility with pv c raw materials, replace 30% main plasticizer. D. Competitive pric E, reduc es c omposite cost of gloves. Applications 1. Passed sgs certificate compliance with eu rohs, reach, svhc and bpa regulations. 2. Viscosity is 30 cst (40 �??), solve high viscosity limitation problem, not affects settlement behavior of paste resin. 3. High flash point >200 �??, compliance with processing requirements. 4. Good stability, high plasticizing efficency, mix with main plasticizer would not affect gloves quality. Specification Pt-co 60 Acid value(mgkoh/g ) 0.30 Heating decrease volume(125 oc, 2 h) 0.50 Density g/ml(20 oc) 1.00-1.05 Viscosity(mm2/s) 30 Flash point(oc) >200 Price Delivery port : tianjin/qingdao Packaging & delivery Packing :200kg iron drum/20mt flexibag/1mt ibc drum Delivery lead time : within 10-20 days after receiving the deposit Supply ability : 20, 000 ton/year
High Plasticity New Plasticizer Used for Plastic Flooring Plasticizer B02 Description Processed from food grade palm oil, B02 is eco-friendly plasticizer passed SGS certificate compliance with EU RoHS, REACH, SVHC and BPA regulations. a.Good color and low Pt-Co, suitable for various of PVC products manufacture, specially used in colorless and transparent PVC products. b.Good compatibility with PVC raw materials, replace 30% main plasticizer and more percentage could be achieved with main plasticizer DBP, DIBP. c.Normally used in winter due to the low freezing point. d.Good thermal stability, suit able for different PVC products manufacturers. e.Good plasticity, w orks better with main plasticizer such as DOP, DBP, DOTP, etc.. f.Cost effective, i t would be first choice on plasticizer for PVC products manufacturers on condition that ensure products quality. Usage widely used in PVC processing industry, special for plastic flooring, synthetic leathers, flex banner, etc.. Applications 1.Passed SGS certificate compliance with EU RoHS, REACH, SVHC and BPA regulations. 2.Low Pt-Co, suitable for light color or colorless products. 3.High flash point(>200ºC),satisfy processing requirements. 4.Good stability, high plasticizing efficency, mix with main plasticizer not affect products quality. 5.DOTP is main plasticizer in exported PVC floor, A03 could replace more than 50%. 6.Our product could be used in both base layer and medium layer of PVC floor. Specification Pt-Co 60 Acid Value(mgKOH/g ) 0.30 Heating decrease volume(125 oC,2 h) 0.50 Density g/ml(20 oC) 1.04-1.06 Viscosity(mm2/s) 50 Flash point(oC) >195 Price Delivery Port : Tianjin/Qingdao Packaging & Delivery Packing :200kg iron drum/20MT Flexibag/1MT IBC Drum Delivery Lead Time : within 10-20 days after receiving the deposit Supply Ability : 20,000 ton/year
High PAR Value good heat dissipation 300W LED GROW LIGHT with fan. 1, Product Data. Model No.Voltage FrequencyEfficiency Flux PFLifetime ML-TC300 100-240V 50/60HZ 2.2µmol/J297 µmol/s >0.95 50,000hrs I, Product Dimension: 320*200*75mm II, LED Chip: Taiwan Epileds Chip III, LED Quantity: 60pcs 5w LEDs IV, Spectrum: Full Spectrum V, PPFD Value: 300umol/m-2s-l (at 60cm height) VI, Packing:1PCS/CTN Carton Size: L420*W255*H130(mm) 2, Product Features A, High robust quality aluminum housing, no additional cooling required. B, 100-240V, EMC driver or other branded as per your need. C, Chinese brands or other customized chips and various spectrum available. D, Energy saving to save 50% comparing with HPS lighting. E, More lights, less heat generation, higher crops yield and lower cost. F, With CE/RoHS certifications 3, Company introduction Megaphoton is a horticultural lighting manufacturer in China, who is professional in developing and producing these items, such as 600W/1000W HID/HPS ballst & Lighting and Led grow lighting as well. Factory covering area is about 50,000 square meter. Passed UL,CUL, FCC, CE, RoSH and ISO etc. We have been in this field in more than 10 years. You may go to our website to check more details or contact Senior Sales: Jair
Megaphoton 50w round shape full spectrum led grow lighting for indoor using. 1, Product Data 1), Model No.: ML-TD50W 2), Power: 50w 3), Voltage: 100-240V 4), Frequency: 50/60Hz 5), Efficiency: 2.2umol/J 6), Flux: 110umol/s 7), PF: >0.95 8), Lifetime : 50,000hrs 9), Item Dimension: 330*30mm (13*1.2 inch) 10), LED Chip: Taiwan Epileds Chip 11), LED Q'ty: 250pcs, 12), Spectrum: Red: 660-665nm, 620-630nm, Blue: 450-460nm, White: 6500K, UV: 390-395nm, IR: 730-735nm 13), N.W.: 1.7lbs/765g G.W.: 2.1lbs/957g 14), Packing Dimension: 14.3''x13.4''x1.8''/ 362*340*45mm 15), Shell Material: ABS with Coating 16), Covering Area: Max. 4x4ft at 3ft height 17), Suggested Distance: 1-3ft 18), Suggested Work Time: 10-16 hours per day 19), Working Temperature: -20-50 2, Application For Hydroponics 3, Company introduction Megaphoton is a horticultural lighting manufacturer in China, who is professional in developing and producing these items, such as 600W/1000W HID/HPS ballst & Lighting and Led grow lighting as well. Passed UL,CUL, FCC, CE, RoSH and ISO etc. We have been in this field in more than 10 years. You may go to our website to check more details or contact Senior Sales: Jair
Megaphoton 45w red/blue spectrum led grow lighting for hobby plant market A part: product data 1, Model No.: ML-TD45w 2, Power: 45w 3, Working voltage: 100-240v or 100-277v 4, Frequency:50/60hz 5, System efficiency: 2.2umol/J 6, Flux: 230umol/s 7, Power factor: >0.95 8, Lifetime: 50, 000hrs 9, LED chip: Taiwan epileds brand or as your requirement. 10, Dimension: L310x W310 x H35mm 11, Warranty: 3 years 12, ip rate: IP42 13, spectrum: red: 660-665nm, blue: 450-460nm. Spectrum aslo accept customized. 14, shell material: abs with coating 15, covering area: max. 4x4ft at 3ft height 16, suggested distance: 1-3ft 17, suggested work time: 10-16 hours per day 18, working temperature: -2-50 degree 19, application:for hydroponics and hobby plants B part: company introduction Megaphoton is a horticultural lighting manufacturer in china, who is professional in developing and producing these items, such as 600w/1000w mh/hps ballst & lighting and led grow lighting as well. Factory covering area is about 50, 000 square meter. Passed ul, cul, fcc, ce, rosh and iso etc. We have been in this field in more than 10 years. You may go to our website to check more details or contact senior sales: jair
Intergrated t8 led grow tube light for multilayer cultivation or seedling A part: product data 1, led grow tube data. 1, model no.: ML-MC18w 2, voltage: 100-240v 3, frequency: 50/60hz 4, efficiency: 2.2umol/j 5, flux : 39.6 umol/s 6, pf: >0.95 7, lifespan: 50, 000 hrs B part: led grow tube features 1, high robust quality aluminum housing, no additional cooling required 2, 100-240v, high efficiency built-in driver 3, chinese brands or other customized led chips and various spectrum available 4, energy saving to save 30% comparing with mh/hps lamp 5, more lights, less heat generation, grow fast and lower cost 6, with ce/rohs certifications C part: company introduction Megaphoton is a horticultural lighting manufacturer in china, who is professional in developing and producing these items, such as 600w/1000w mh/hps ballst & lighting and led grow lighting as well. Factory covering area is about 50, 000 square meter. Passed ul, cul, fcc, ce, rosh and iso etc. We have been in this field in more than 10 years. You may go to our website to check more details or contact senior sales: jair.
Zirconium(IV) Hydrogen Phosphate Zirconium(IV) hydrogen phosphate is newly developed and multi-functional mesoporous material and also one of the well applied solid acid materials in the form of layers. Zirconium(IV) hydrogen phosphate has a good potential prospect in applying to chemistry, optics, electronics, materials science and Environics, etc. due to its role of multi-functional material. Second: Product Instruction: English NameïZirconium(IV) hydrogen phosphate Chemical AliasïZPS-IPPA CAS RN:13772-29-7 EINECS Serial Numberï237-401-7ïEurope Chemicals Item Serial Numberï Third: Physicochemical Property White powder, with 3.3g/ml of density, same common property of layer compound, high stability with its chemical property and layer structure, relative bigger proportion of surface percentage( total area of the item), high electric density on its surface(charge numbers on its surface per unit), is a strong type of solid acid. Itâ??s insoluble in water and an organic solvent with resistance to strong acid and certain soda. It has high stability and intensive mechanical strength.( When this material encounters with external force, the unit area can bear the highest capacity) The Fourth: Category : Zirconium(IV) hydrogen phosphate can be classified as a-Zrp, y-zap ït-zap( still under experiment) these three types so far. A-zrp is the main specification we produced at present. It can be applied toï ï�¬Environment Sideï1ïIt can be attached to CO2 or gas characterized with acidã??It can be produced with civil construction materials, manned fabricated plates, paper and coatings etc. featuring its absorption with composite multifunctional materials (methanol, ammonia) . 2ïIt is with strong affinity with soda, so that it can produce composite catalyst after its combination with Alcohol, pyridine and some other polar molecules, which can protect our environment. 3ïIt can produce pesticide with PCBS, PAHSï PCDDS and etc.
Based in Australia, MICHIKO is an international company specializing in science-innovative infant nutritional products. In possession of the superior resources and expert teams in infant and children s nutrition from around the world, we are committed to studying the physical structure of different races to pursue innovation in science-based nutrition to help babies grow up strong and healthy. We at Michiko believe that nothing is more important than food safety. Hence, we start quality control from the beginning by collecting premium fresh milk in Victoria Ranch to processing, packaging, inspection to ensure dairy safety and make each choice worthy. Natural grazing is adapted and oxytocin is forbidden in use. Every cow has an electronic ID? which records all information about feeding and milk production in order to collect health conditions of the cows and trace the progress of milk. Efficient cold-chain transportation Automatic milking system and cold-chain transportation is adapted in Michiko dairy to make sure nutrition of fresh milk can be maximum preserved. Whole-process monitor of production chain We complies with the strict regulations set down by Australian Quarantine and Inspection Service (AQIS) in all manufacturing process. 100% Australian made. Our dairy products have passed strict quality control in factory and also the NATA test before launching. No sucrose, NO dyspepsia; Comprehensive Nutrition and Efficient Absorption We understand babies nutritional needs, and we know that a simple addition of nutrition is not the smart way. Only a scientific nutrient ratio can bring good care to babies through superior absorption. MICA series formula contains supreme nutrients such as DHA, AA, and nucleotides to meet the nutrient needs of babies. Besides, MICA series scientific proportioning of lactalbumin and prebiotics GOS interact with nutrient elements to optimize babies absorption environment and help them grow better. Last but not the least, we have no sucrose. MICA does not contain vanillin, sucrose or maltodextrin, which may cause dyspepsia and bad habit on their diet. MICA contains scientific formula with DHA, AA, nucleotide, choline, vitamins and other nutrients that can provide comprehensive nutritional support to babies healthy growth, both mental and physical. MICA features superior absorption traits as well as body utilization of nutritional substances. lactalbumin promotes digestion of protein, and prebiotic effects of GOS benefit intestinal vitality and health. Both scientific ratio and absorption factor promote body vitality, while at the same time optimizing the nutrient absorption environment, effectively increase the absorption rate, and aiding in the development of the baby.
EASY TO USE : When the faucet is opened, the length 25 feet of the hose extends to 50 feet and can reach to the any corners of the garden. It is fully retracts to the original length in minutes once water is off. Our expandable garden hose can bear high temperature up to 50â?? and the temperature does not freeze in water tubes at -20â?? below zero, in addition, the pipe will be no moss and bacteria because the ultraviolet resistance. PRODUCT FEATURES: The expandable garden hose produced by Hung-Ta, no matter how the product quality and functionality are a major innovation in the field of horticulture. The quality of our products is not only trustworthy but also widely recognized and praised by the consumers. â?? LEAK-PROOF: We had problems with the leakage of water pipe that are currently sold on the market for many different brands after they have been used a period of time. Hung-Taâ??s R&D team has accumulated professional and multi-year experience, breakthrough improvements have been made to the shortcomings of leaky water connectors. â?? PATENT : Our products are not only obtained patent in Germany, Canada, USA, Taiwan & China. â??Our garden hoses has passed the California Proposition 65 drinking water non-toxic inspection standard. â?? DURABLE DESIGN: The outer tube of the water hose is made of elastic rubber and strong special multi-dragon yarn, and the wear-resistant and pressure-resistant of inner tube adopts strong TPE composite material. It is no problem when water hose drag on the garden turf, you donâ??t have to worry about abrasion or breakage of water hose. Our sturdy hoses is built to work with a minimum water pressure of 40 psi and a maximum of 200 psi, with 100 psi optimum. It works with any water supply. â?? LIGHTWEIGHT & EASY TO CARRY: The expandable garden hose is flat designed so it will not twist tangle or kink, the hose are with small volume and lighter designed (approx.1kg) occupying no space for easy to maintain tidiness and easy to carry. When you are troubled by water pipes that are constantly leaking, heavy, rigid and even knotted, please remember to choose the expandable garden hose made by Hung-Ta. Choosing Hung-Ta products is equal to helping you solve all your problems while making your gardening life relaxed and full of fun.
FIT SNACK (FRUIT BARS) Natural 100%! With your favorite SPORT! Great source of Vitamin C, rich in antioxidants and dietary fibers with a special touch from nature bu adding the apple, simply a health meal you must try. Benefits of Lemon: Rich in vitamin C Promotes hydration. Improves the skin quality. Aids in digestion. Helps prevent kidney stones. INGREDIENTS: According to type: (Peach, Cherry, Lemon, Guava, Apricot, Strawberry, Orange, Mango, Pineapple, Date, Raspberry, Apple, Plum, pomegranate, Fig, Grape) - Natural Fruits (Apple, Lemon) - Sugar - Olive Oil Nutritional Facts: Calories (per 100 g): 340 calories Nutritional value (per 100 g): Carbohydrates 86 g, Fats 178 mg, Total Sugars 50 g, Calcium 21 mg, Sodium 93 mg Shelf life: 2 year Storage conditions: not more than 25 ° C. THE FRUIT ORIGINAL TASTE! We make our bars from simple, natural ingredients, but sourcing ingredients that meet our standards is far from simple. We insist on working only with farmers who share our commitment to quality, taste and the health of our planet. Itâ??s All natural! Non-GMO No preservatives Gluten free, all natural Without dyes Without flavoring FULL OF NATURAL FOOD FIBERS To receive the greatest health benefit, eat a wide variety of high-fiber foods. Our GIDA FIT SNACK bars are rich of fruit fibers. A high-fiber diet has many benefits, which: Helps maintain bowel health Lowers cholesterol levels Helps control blood sugar levels Aids in achieving healthy weight Packaging & Shipping Buying Options: We are selling this product by Pallets. Each 1 pallet contain 90 box (each box contain: 12 show boxes * 24 fruit bar/box * 0.14g/bar) 20 ft. container contain 10 pallet 40 ft. container contain 20 pallet Packaging & Delivery Packaging Details: Each Pallet contain 90 Packaging boxes Each Packaging box contain 12 show boxes Each Show box contain (24 bar * 0.14g) Delivery Time: 15 to 45 days depend on the destination Our Services Wholesalers Discounts: All the orders are benefiting of 12% discount from 1/10/2017 â?? 29/09/2018 as a promotion for the new agents. While you still could reach up to 27% discount depends on the amount! Free Samples: We are offering free samples service, while the shipping cost still on the buyer. Shipping Services: We are offering shipping services with the best prices available on the market, but it's still an optional decision depends on buyer willingness.
Specifications Best quality triangle open type rock breaker excavator backhoe loader skid steer applicable, suitable for rock breaking, mining, construction demolition, etc. Why YTSS? YTSS - ONLY make reliable products, based on developed tech, advanced manufacturing facilities, skilled staff & strict testing standard. 1. SSPSC - Powerful & High Compatibility. 2. SSPSC - Durable, Easy Maintenance, Low Breakdown. 3. SSPSC - High Quality but Low Prices. Sincerely invite global customers to us for visits & co-operations. Production Capacity: YTSS - have professional sales & after-sales team to keep on providing all our customers with the best services & quality products at competitive prices. 1. Advanced manufacturing facilities. 2. Professional technicians with Korea technology, and skilled workers. 3. Production capacity reaches 1,000 sets/month. How to choose SSPSC Hydraulic Breakers? 1. SSPSC - Various Models. 2. SSPSC - for Each Model, Three Appearance Types Optional: Silent Type, Top Type & Side Type. You can tell us your desired Breaker's Model No. & Appearance Type, e.g., Top Type SB40; or tell us the Model No. of Excavator, we'll help find the most suitable model. Delivery: 1.3-10 working days after payment received. 2. All SSPSC Hydraulic Breakers do impact test before sale, especially the cylinder. We will check whether piston moves smoothly. Quality first is our persistent pursuit. 3. We will arrange ocean or air transportation as per customersâ?? request from any port of China. Standard Configurations: * Chisels x 2 pcs * Hydraulic Oil Hoses x 2 pcs * Nitrogen Charging Kits with Pressure Gauge x 1 set * Nitrogen Bottle x 1 pc * Seal Kits x 1 set * Tool Box with necessary maintenance tools x 1 set * User's Manual x 1 pc Packaging: 1. SSPSC products inner wrapped by stretch film 2. Outside packed by pallet or ply-wood case 3. As per customerâ??s request. Inner is stretch film, outside is export wooden case or as per customerâ??s request Our Service: 1. OEM or ODM service is available. 2. 7 days * 24 hours hotline and email service. 3. Well-trained and experienced staff to answer all your questions in 24 hours. Professional sales team keep on providing you reliable products with the best price. 4. Life-long free technical consultant available. z
Flake type Granulator is a Plastic Crusher Machine, used in crushing ordinary sheets, tubes, extrusion mold products, runners, packaging materials, and other plastic products. Granulators are in different shapes and sizes that are designed to granulate specific parts or plastic chunks. We provide customized mesh holes according to the client s demand and specifications. a leading supplier of injection molding machine components to the plastic industry. We supply the best products to meet our customers needs. The Plastic Grinding Machine uses plastic materials or pet bottles for the crushing process and utilizes the output granules for the plastic injection molding process. The plastic recycling process was formulated with the help of a flake-type plastic crusher machine. Sheets, tube plastics, packing plastics, and profiles are suitable for the crushing process in the flake type model. The process of recycling and restoring the above-mentioned products. The mentioned materials use the flake-type plastic crusher for the effective crushing of the materials in a defined format. So, the plastics are manufactured with plastic injection molding machines. Several models of the crusher are available at our premises for the effective crushing process of the materials. Therefore, the crusher crushes large materials with the help of heavy-duty machines. The flake-type Plastic Grinding Machine utilizes the blades for the cutting processes. Likewise, the updated machines comprised 6-36 rotary cutters and 2-4 stationary cutters. The blades of the crusher work efficiently and cut ensures the perfect operation of the machines. The total grinding chamber of the machine varies from 230 200 mm to 1200 800 mm. Then the chamber material comprises stainless steel and externally with strong iron. The parts of the crusher vary with respect to the output materials and the input materials. YT-GP series granulators of flake type adopted with sealed bearings which can handle long-hour operation and hence, the unique design of the cutter ensures the equality of granule sizes. The cutters treated thermal processing. Within 400 models installed casters. Above 500 models installed anti-vibration mounts as optional. If in case of the material varies, then the plastic crusher machine can be changed according to the requirement such as claw/flat type, GB series, or any other plastic crushers.
This kind of laser marking machine for metal is specially designed for customers who need to mark metal material such as cast iron, stainless steel , magal , zinc alloy , cooper, nickelage, galvanization, aluminium oxide and so on . Applicable materials cast iron, stainless steel , magal , zinc alloy , cooper, nickelage, galvanization, aluminium oxide and so on. Applicable Industry This laser marking machine for metal is suitable for packaging industry and is especially fit for marking beverage bottle and capsule aluminum foil . scb2018ym Features of laser marking machine for metal a.High integration fiber laser with good beam quality and stable output light power ,which will improve the working efficiency greatly . b.Less space demand by compact structure and small size c.High anti-reflection and could work without shadows and imaginary line even on high reflective materials like aluminum, copper , gold , silver etc. d.Excellent performance with high-speed digital scanning galvanometer with characteristics of small size , high speed , stable signal transmission. e.More flexible to fit for customerâ??s production line by modular design and separated lifter and power box . f.The laser marking machine for metal is easy to operate with embedded operation system g.Touch screen with friendly HMI which is very convenient to operate h.The laser marking machine for metal can meet different industries requirement .it support mark date code , time code and serial number etc Speciafication Laser wavelength : 1.06um Light spot quality : -
Rod tongs accessories ZQ203-125 Roller parts 19.120.00 VOLVO series dieselMachine parts engine * oil filter VOLVO-3831236 SCREW, CAP-HEX HEAD 50010-32-C5D Pin: Retaining Tds-11Sb16M204 30152845 Fan guard 7C1005 Casing power tong accessories TQ35-13 3/8" connector 24.600-10 Zwitterions for Drilling FluidsPolymer strong coating agent FA-367 VOLVO diesel engineAir distribution system * air filter element 3826215 TAD1631GE Pipe Handler Position Sensor N02-1006-020 Canrig Drill pipe clamp accessories ZQ203-125 screw 19.100-09 ACCUMULATOR, HYDRO-PNEUMATIC 4" 110563-1 Locking screw SS-10-24-0038 Canrig 35�?35 FZ35-35 gatePlate Assembly 2-7/8" DFZ1310.01G-02 Electric control box FKDQ640-7 AI module IB IL AI 2/SF-ME Logging tool accessories Rotary well wall corer FCT type program sheet 28C16 FCT-2DMK* PIN, ROLL, 0.25 X .75 LG, SST 51604-06-S Cylinder liner piston accessories F-1300 Stud bolt M39*270 hydraulic hose 2.4.21.085 Integrated single point camera inclinometer SQE-B�¦45 Explosion-proof magnetic starter\380V-40/40A-Exeâ?¡BT4-IP65-WF2-DNG3/4 35�?35 BOP AccessoriesFZ35*35RS support ring FZ897.1.15 MAN33.373DFC fuel * diesel filter assembly Drill rod power pliers accessories ZQ203-125A clamping cylinder fork head 19.100-27 Drill pipe clamp accessories ZQ203-125 Transition valve plate 19.820.00 GT550E chassis*Front wheeltire screw Rotor: Brake, (MT) 109555+30 35�?35 BOP accessoriesFZ35-35 positioning pin RS11160.02 VOLVOFM12 coolingElectrical appliances * starter motor brushes Winch drive shaft accessories ZJ32L6 spacer BA70011-03.45 GT250E electric appliance* power generationmachine belt NUT, HEX-SLOTTED 50516-C 11085 RING,HEAD,CYLINDER 661-20-0 Drill pipe power tong accessories ZQ203-100 jaw plate 4-1/2" Drill pipe clamp accessories ZQ203-125 Boom assembly 19.500.00 SCREW. Catalog number: GB70-86. MANUFACTURER: JIANGSU RUSHI MACHINERY CO, LTD. Equipment: HYDRAULIC POWER TONG ZQ203-100. One-way clutch accessories ZJ32 Low-speed clutch airbag (belt-shaped airbag) 115.01.20.00 GT350E Engine*SteamCylinder head gasket General workover tool hydraulic oscillator AVT-288 T:2-3/8"PAC-B POD*â?´ Amplitude variable density logging tool SCG-70A-01 GT350E transmission* power take-off drive shaft SB I60HB14/15 PISTON COMPLETE 6x1 5/8 Turntable input shaft accessories ZJ45 Input shaft sleeve 106.02.30.04 Drill Stabilizer WL 215.9*500mm 410*430 D 1850mm Safety sub 1.08.01.044 Turntable climbing shaft II accessoriesZJ-45J standpipe filter assembly 101*35MPa new Wheel Loader AccessoriesZL50G key switch 5001292 GT550E Universal* wiper bladechip Drill pipe power pliers accessories ZQ203-100/125 retaining ring 0102-15M Drill pipe hanger accessories ZQ203-100 Nut 010804-01M 88096 SEAL,LIP,12.5X13.75X.625 SB12-1375NC-0400-W Drill pipe power tong accessories ZQ203-125 Jaw plate assembly 2-7/8" 19.148.00 Winch output shaft accessories ZJ-45 output shaft assembly 106.11.314.00 51604-16-C PIN, ROLL
Common Name Phoxim Chemical Name A-[[(diethoxyphosphinothioyl)oxy]imino]benzene-acetonitrile Cas NO. 14816-18-3 Mol. Wt. 298.3 �º C M. F. C12H15N2O3PS Specifications 92% TC, 40% EC, 50% EC, 75% EC, 5% GR Physical & chemical properties Appearance: Yellow liquid; (tech., reddish-brown oil). M. P.: 6.1 �º C B. P.: Decomposes on distillation V. P. 2.1 MPa (20 �º C) K OW logP = 3.38 Henry 4.18�? 10-1 PA m3 mol-1 (calc. ) S. G. /density 1.178 (20 �º C) Solubility In water 1.5 mg/l (20 �º C). In tolu ene, n-h exane, dichl oromethane. Slightly soluble in aliphatic hydrocarbons, vegetable and mineral oils. Stability relatively slowly hydrolysed; DT50 (est. ) 26.7 d (pH 4), 7.2 d (pH 7), 3.1 d (pH 9) (22 �º C). Gradually decomposed under u. V. Irradiation. Toxicity Oral Acute oral LD50 for rats: >2000 mg/kg. Skin and eye Acute percutaneous LD50 for rats: >5000 ml/kg. Not irritating to eyes or skin (rabbits). Inhalation LC50 (4 h) for rats >4.0 mg/l air (aerosol). ADI (JMPR): 0.004 mg/kg b. W. [1999]. Toxicity class WHO (a. I. ) II; EPA (formulation) III EC hazard Xn; Birds LD50 for hens 40 mg/kg. Fish: LC50 (96 h) for rainbow trout 0.53, bluegill sunfish 0.22 mg/l. Daphnia LC50 (48 h): 0.00081 mg/l (80% premixes) Bees: Toxic to bees by contact and respiratory action. Applications It's a strong contact insecticide, stomach poison and has a clear effect for larva of Lepidoptera, insects of warehouse mosquito, flying and older cotton bollworm, and a long-effect for insects of subterranean. Application on leaf is short-effect and non-remain. Widely used for prevention and cure of insects for cotton, fruittree, vegetable, soyabean, tea, mulberry etc., such as aphid, thrips, soil, it can prevent and cure of black cutworm, click beetle, peach fruit, borer etc., and dispoes of seed of whear, corn & peanut, also for insects of soil, such as mole cricket, click beetle and so on spraying it can prevent and cure of mosquito and flying etc.
Quick Information Brand Name: BSY Place of Origin: China Model Number : Plasticizer A02Pt-Co : 40Acid Value(mgKOH/g) : 0.30Price : negotiated Description New Eco-friendly Plasticizer Based On Palm Oil Plasticizer A02 Description Processed from food gr ade palm oil, A02 is eco-friendly plasticizer passed SGS certificate compliance with EU RoHS, REACH, SVHC and BP A regulations. a. Good color and low Pt-Co, suitable for various of PVC products manufacture, specially used in colorless and transparent PVC products. b. Good compatibility with PVC raw materials, replace 30% main plasticizer and more percentage could be achieved with main plasticizer DBP, DIBP. c. Normally used in winter due to the low freezing point. d. Good thermal stability, suitable for different PVC products manufacturers. e. Good plasticity, works better with main plasticizer such as DOP, DBP, DOTP, etc.. f. Cost effective, it would be first choice on plasticizer for PVC products manufacturers on condition that ensure products quality. Usage widely used in PVC processing industry, special for cables, flexible pipes, ground mats, films, synthetic leathers, etc.. Applications 1. Passed SGS certificate compliance with EU RoHS, REACH, SVHC and BPA regulations. 2. Suitable for printing film, packing film, transparent films, etc. 3. Suggest A02 to replace 10-15% main plasticizer in high transparent film products. 4. Ordinary transparent film products, recommend C01 to replace 10-15% main plasticizer. 5. B02 or B04 could replace 30% main plasticizer in colored and calcium powder ingredient film products. 6. B02 or B04 could replace 100% main plasticizer if it is chlorinated paraffin. Specification Pt-Co 40 Acid Value(mgKOH/g) 0.30 Heating decrease volume(125 oC) 2 h 0.35 Density g/ml(20 oC) 1.09--1.11 Viscosity(mm2/s) 50 Flash point(oC) 185 Price Delivery Port : Tianjin/Qingdao Packaging & Delivery Packing :200kg iron drum/20MT Flexibag/1MT IBC Drum Delivery Lead Time : within 10-20 days after receiving the deposit Supply Ability : 20,000 ton/year
