TEMPO make COD digester outer cabinet made of mild steel duly coated. Double wall construction with insulation for minimum heat losses increases the efficiency of the system. An aluminium block with holes (dimension 40 mm dia x 80 mm depth) is used to hold COD tubes. The aluminium block is heated to maintain the temperature up to 180�°C. Temperature range â?? Above ambient to 180�°C Resolution â?? 1�°C Supply â?? 230V, AC Features : Superior finish. Long-lasting Customized options Exceptional quality
This apparatus is an ideal instrument to check the sealing integrity of the blister packs, strip packs, sachet and pouch packs etc. It is also used for checking leaks from capped bottles, induction sealed containers, sealed or crimped containers etc. The leak test apparatus in a stainless steel body with phenomenal compactness. The instrument is equipped with a long-lasting vacuum pump, which gives a higher level of vacuum in the shortest possible time. Die pressed polycarbonate vacuum desiccator sustain vacuum for a long time. Application : Drugs manufacture (Blisters and small sachets containing tablets) Pain manufacturer Food manufacture (Sugar, spices, granulates) Mineral water bottle manufacturing Features : The very low noise level Polycarbonate vacuum desiccator sustains vacuum for a long time. Stainless steel 304 construction Built-in vacuum and isolating valve. Stable digital timer for auto stop Vacuum level up to 550 mm of Hg Audio alarm after completion of software.
TEMPO make lab clean is a carefully enclosed machine which is a unique filter combination that filters our air and gas contaminants thus by giving most clean air. The air is drawn through the prefilter, carbo filter and HEPA filter and blown clean air in the room. Application : Drug manufacturer company Paint manufacturer company Rubber industry Food Manufacturer (sugar, spices) Polymer industry Andrology and IVF lab Chemical lab Offices ICU rooms Hospital waiting rooms Construction : Single wall construction in SS 304 or GI powder coated. Blower : Backward curved centrifugal fan Dynamically and statically balanced blower less vibration and less noise. Filter system Prefilter : Prefilter efficiency-EU-5 rating Efficiency 95% to 5 micron Carbon filter : Reduces CFU and VOC HEPA Filter Efficiency-EU-13 rating Removing ultrafine particles (dust, dander, pollen, mould ad other common allergens in the room) Efficiency 99.97% to 0.3 microns. Filter replacement : Timer for filter life Unique indicator for a filter change.
Dynamic pass box equipment made of powder-coated high-grade stainless steel (304/316) with international quality standard components including electrically interlocked doors and UV light. These dynamic pass box equipment are equipped with a prefilter of 5 microns and box type HEPA filter of 99.99% to 0.3 microns. Features : High-grade stainless steel construction Cleanliness ISO CLASS 100 Low noise level Precision designing and finish Electrical interlocked Floor and wall mounted design Buzzer indication to know the material is kept inside Maximum chemical resistance construction Interlocked between UV light and LED light UV light along with hour meter Indicating lamp to know the door lock unlock condition Toughen glass window LCD display
Static pass box equipment is made of high-grade stainless steel (304/316) with international quality standard components including electrically interlocked. This pass box is designed to minimize traffic and contamination entry into the clean room. Enables parts, tools and other items to be passed to and from the room. This pass box unit acts as an airlock device preventing ambient air from entering or clean air from exiting from the clean room. Features : High-grade stainless steel construction Precision designing and finish Electrical interlocked Floor and wall-mounted design Buzzer indication to know the material is kept inside. Maximum chemical resistance construction. UV light along with the hour meter. LED light Indicating lamp to know the door lock and unlock condition Toughen glass window LCD display
TEMPO drum heaters provide an easy, efficient, clean and economical way for the handling of viscous of low melting point solidified materials in drums. Such materials include asphalt, bitumen, fats, gelatin, glucose, grease, lubricating oils, paints, petroleum jelly, phenols, plastics, sodium tar, vanaspati oil, varnishes & waxes etc. TEMPO drum heaters are mobile ovens heated by Tempanel flexible surface electric heating elements operating at a black heat. They are the mode in rugged designs and stand normal usage in chemical industries. They can be used for heating the contents of drums kept in the vertical or horizontal positions. The contents will be heated at a rate depending on the size of the drum and its contents. The contents may either be melted completely and removed as a liquid or they may be melted only at the surface touching the drum walls and removed as a slid block by lifting the drum. The heating in â??TEMPOâ?? drum heaters in gentle and uniform and there is no chance of local overheating. Automatic temperature control is provided as standard equipment, except in the base and top heaters in which it is not required. Temperature range 5C to 60C Temperature accuracy ±0.5C Supply 230V, AC Base Heater : The base heater for drums in the vertical position & is suitable for use with type TI-129 B drum heater. Vertical Drum Heater : TI-129 B is a vertical drum heater in two sections hinged to each other, forming a cylindrical heater when closed. It is fitted with castor wheels. The standard model can take a standard size drum of 45 gallons capacity. Heating System : The heating in TEMPO make drum heaters are gentle and uniform and there is no chance of local overheating.
TEMPO make soxhlet extraction heaters are designed to use in laboratories for solvent extraction under reflux. Typical applications are the determination of residual oil content in oil cake, assay of crude herbal drug sources etc. Max surface temp 400C Supply 230V, AC Construction : TEMPO make soxhlet extraction heaters is suitable to heat soxhlet flasks of 100-350 ml capacity. The heating element is attached to knitted fabric to provide flexible support to the bottom of the flask. Glass wool insulation fills the gap between the metal casing and the heater. In event of spillage, the solvent will either evaporate or escape through the draining hole below each element. The housing has two retort rods and a cross bar on which the extraction apparatus is fixed. The apparatus has an inbuild energy regulator which controls all the heaters. The heating elements have individual ON/OFF switch and pilot lamp to indicate working. Controlling System : Energy regulator and pilot lamp Heating System : The heating element is attached to knitted fabric to provide flexible support to the bottom of the flask. Glass wool insulation fills the gap between the metal casing & the heater.
TEMPO make a tray dryer are with the forced air circulation provided by means of motorized blower fitted on the oven for recirculation of air which ensures a homogeneous hot air mixture and an exact temperature profile. Temperature range 50C to 200C Temperature accuracy ±0.1C Supply 440V, three phase Controlling System : Microprocessors based auto tune PID temperature controller with & dual display of set value & process value for precise control of temperature with PT 100 sensor is used for temperature. Heating System : SS tubular heating elements used on the side walls to maintain a uniform temperature condition inside the chamber. Air Circulation : The motorized blower fitted on the top side of the chamber develop unique airflow system which ensures maximum temperature distribution inside the temperature. The unique airflow assures that there is a quick recovery after the doors are opened.
TEMPO make fume hood is a type of local ventilation device that is designed to limit exposure to hazardous or toxic fumes, vapour's or dust. Air is drawn from lab space into the fume hood then dispersed via a pipe to the outside atmosphere. Basically, it protects the user from inhaling toxic gases. Application : Chemical lab Food manufacturer Drugs manufacturer company Paint manufacturing company Rubber industry Polymer industry Cement industry
TEMPO make laminar airflow cabinets are a series of high efficiency clean room workbenches designed to protect equipment and other contents of the work zone from particulates. In a vertical laminar airflow cabinet, filtered air blows on the work zone and leaves through the holes in the base of three sides SS 304 covered sheet. As compared to horizontal type, vertical flow cabinet can provide greater operator protection. Application Plant tissue culture Media plate preparation Electronic inspection Media device assembly Pharmacy drug preparation General lab work Semiconductor industry Aeronautics industry
Tempo make Laboratory Autoclave are suitable for Pharma & Biotech industries, Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc Technical Data Temp. Range : 121 C to 125 C Pressure Range : 15 to 22 PSI Factory Set : 15 PSI at 121oC Supply : 230 Volt, AC, Single Phase, 50Hz
Tempo make Laboratory Autoclave are suitable for Pharma & Biotech industries, Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc Technical Data Temp. Range : 121oC to 125oC Pressure Range : 15 to 22 PSI Factory Set : 15 PSI at 121oC Supply : 230 Volt, AC, Single Phase, 50Hz
Tempo make Laboratory Autoclave are suitable for Pharma & Biotech industries, Food research & Quality assurance labs, Agriculture research, Health care & Diagnostic labs, University, etc Technical Data : Temp. Range : 121 C to 125 C Pressure Range : 15 to 22 PSI Factory Set : 15 PSI at 121 C Supply : 230 Volt, AC, Single Phase, 50Hz
TEMPO make laboratory autoclave are suitable for pharma & biotech industries, food research & quality assurance labs, agriculture research, healthcare & diagnostic labs, university, etc. Temperature range 121 C to 125 C Pressure range 15 to 22 PSI Factory set 15 PSI at 121 C Supply 230V, AC Construction : Vertical double walled design has a single chamber for steam & water. Lid, flange & bottom plate is also made of SS, all joints are argon welded. Jointless silicon gasket. Heavy duty industrial flange heater. Lid fitting pressure gauge 0-30 PSI, safety spring loaded pressure valve, steam release valve. Safety high pressure release valve. Foot lifting arrangement is provided in 121C/D/E/F, a basket made of thick stainless steel (S.S.) rod wire mesh. Technical Specification : Semi automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer. Low water level cuts off the system with magnetic oat switch for heaterâ??s safety. Fully automatic system for autoclave is supplied with microprocessor based digital temperature controller with an inbuilt timer. Low water level cuts off the system with magnetic oat switch for heater's safety.
The cryo baths are designed for research work and are provided with the circulating pump to ensure uniform temperature. TEMPO low temperature baths are designed for research work at the desired temperature with high accuracy. The temperature is controlled by microprocessor based PID controller with an accuracy of ±1C. The unit is provided with a circulation pump to ensure uniform temperature. Low temperature bath offers a combination of contemporary design, advance microcontroller and a range of accessories to suit your specific laboratory or process application. High strength cabinet construction with stainless steel interior tanks withstand the most critical applications in demanding laboratory environments. The unit is mounted on castor wheels for ease of mobility. Temperature range 0C to -20C Temperature accuracy ±1C Supply 230V, AC
The water baths are designed and manufactured to comply with the requirements of the various pharmaceutical and lab industries. â??TEMPOâ?? serological water bath have SS interior and powder coated mild steel exterior. The temperature is controlled by means of a precision thermostat. Temperature range 5 C above ambient to 60C
The water baths are designed and manufactured to comply with the requirements of the various pharmaceutical and lab industries. Tempo Water Bath have S.S. 316 Interior and S.S. 304 exterior. Temperature Range is from 5�°C above ambient to 99�°C max. Temperature is controlled by PID controller. Equipment is supplied with Pyramidal Lid. Temperature range â?? 5�°C above ambient to 99�°C Supply â?? 230V, AC Features : Safety temperature controller Low water level indicator Timer with alarm European plug Stainless Steel water drainage IP20 protection for control panel Drain for water supply Inlet nozzle for water filling
TEMPO make deep freezer are designed to provide an ideal freezing environment for advanced medical and industrial applications and also suitable for Research Laboratories, Blood Bank, Biological Use includes preservation of plasma, blood components, vaccines, etc. These units are available in horizontal/vertical versions. Temperature range -40C Temperature accuracy ±3C Supply 230V, AC Temperature Control : Temperature is controlled by means of imported microprocessor based autotuned PID controller with CE mark & dual display of set value & process value. Refrigeration System : By means of CFC free hermetically sealed Emerson Copeland make compressor for better cooling with R 404 A (eco-friendly) refrigerant with a time delay to safeguard compressor system. Full view observation Acrylic door to observe sample inside the chamber. Specially designed stainless steel rod trays ensure uniform temperature distribution.
TEMPO make glass door refrigerators are stable and reliable with the refrigerated environment for exact laboratory requirements. Lab refrigerators are used for maintaining storage conditions of a product, to prevent its exposure to low temperature applications, where the temperature requirements are on the lower side. Ideal temperature environment for clinical research, pharmaceutical and industrial use. Adjustable shelves and wide range set point for varying laboratory applications including chromatography and pharmaceutical storage. The application includes refrigerated storage of vaccines, reagents, cultures, medicines and blood samples. Temperature range 2C to 8C Temperature accuracy ±0.5 C Temperature uniformity ±2 C Supply 230V, AC Controlling System : Microprocessor based auto tune PID temperature controller with a dual display of set value & process value for precise control of temperature. Sensor : PT 100 sensor is used for temperature & electronic type sensor for humidity. Heating System : High quality SS tubular heaters are used for better heating. Refrigeration System : CFC Free hermetically sealed Emerson Copeland make compressor for better cooling with R134 A (Eco Friendly) refrigerant with a time delay to safeguard compressor system.
TEMPO lab refrigerator is made of double walled construction with thick high grade PUF insulation. Full view inner acrylic door & front door with gasket & locking arrangement. The motorized blower at the backside of the chamber develops a unique airflow system to maintain uniform temperature condition inside the chamber. Unique airflow assures quick recovery after door openings. The unit is provided with a user friendly adjustable specially designed S.S rod trays, ensures uniform temperature distribution. The equipment is mounted on castor wheels for easy movement. Temperature range 2C to 8C Temperature accuracy ±0.5C Supply 230V, AC Controlling System By means of imported microprocessor based auto tuned PID controller with CE mark & dual display of set value & process value. Sensor PT 100 sensor is used for sensing the temperature. Heating System High quality S.S. tubular heaters are used for better heating. Refrigeration System CFC free hermetically sealed Emerson Copeland make compressor for better cooling with R134 A (eco-riendly) refrigerant with a time delay to safeguard compressor system. Validation Port : 50 mm validation porthole with silicon rubber seal to insert sensor for validation. Controlling System : By means of imported microprocessor based auto tuned PID controller with CE mark & dual display of set value & process value. Sensor : PT 100 sensor is used for sensing the temperature. Heating System : High quality S.S. tubular heaters are used for better heating. Refrigeration System : CFC free hermetically sealed Emerson Copeland make compressor for better cooling with R134 A (eco-friendly) refrigerant with a time delay to safeguard compressor system. Validation Port : 50 mm validation porthole with silicon rubber seal to insert sensor for validation.
