Heat shrink tubing can combine various properties in a unique way Taken together, include: outstanding electrical characteristics, excellent Chemical and solvent resistance, high purity, lubricity and penetration Out of reliability. The double-layer fluoropolymer PTFE/FEP tube consists of a PTFE heat shrinkable outer layer and an FEP inner layer It is widely used and can be used with wires, cables, connectors, connectors, terminals, etc Tightly combined, with the role of moisture-proof. When the covered part is heated, PTFE contracts tightly onto the inlay while FEP melts and flows onto a solid or near-solid package, forming an extremely tight bond that can withstand maximum extension or vibration stress. double layer heat shrink tube has all the electricity of PTFE Gas, chemical and mechanical properties. Operating temperature up to 230 degrees. Our roll shrouds extend the life of the roll, enhance reliability and enhance the quality of the product. A little heat can be applied to the roll to form a layer of high strength, armor like a strong sheath, which protects the roll from chemical solvents, acids, shocks, wear, heat and moisture. It also eliminates the problem of viscous accumulation. During processing, only a convenient heat source, such as a heat gun, can be quickly and easily condensed onto the roll surface, and can be cleaned with solvents or reagents.
If your temperature requirements are up to 260�°C (500�°F), PTFE tubes (polytetrafluoroethylene) are recommended. When terminated, it can be prevented from "melting" by soldering iron. Due to its excellent dielectric properties, it is widely used in electronic and electrical services. Another major advantage of PTFE tubes is their non-stick properties, allowing the material to be transported with minimal fluid resistance. Note, however, that PTFE reacts with fluorine, molten sodium hydroxide, and molten alkali metals. We have a full range of PTFE extrusion tubes for protecting wiring or transporting fluids in critical applications. PTFE tubes are available in a variety of configurations and custom designs. PTFE tubes have inherently excellent chemical resistivity and low coefficient of friction, and their performance is superior to that of glass and graphite, making them ideal materials for fluid transport. PTFE tubes can be used with almost all industrial solvents, chemicals and corrosive materials, and can be used in high-temperature processes. It can be steam sterilized without affecting its physical properties, such as surface hardness, elongation, deflection life or load deformation. PTFE tubes are usually translucent white, however, the whiteness varies depending on batch and wall thickness size. Colored PTFE tubes are also available and are often used to simplify tube wiring during system installation.
This crankshaft lathe with simple structure, easy operation and wide applicability. It is suitable for grinding the crankshaft neck and spindle neck of the engine in automobile, tractor and diesel engine repair shop, and can also be used as an external grinding machine for general external turning. Structural features: A. Machine tool by mechanical, electrical, hydraulic control, manual control. b, the left and right chuck of the base machine tool adopts adjustable cross chuck to improve the installation and adjustment efficiency of the workpiece. c, the workpiece is gripped by the center or chuck, driven by the motor of the head frame, manual feed grinding. d, the table is moving longitudinally-there are manual and maneuverable, and the table can only move quickly when maneuvering for jump gear or adjustment. e, the maximum adjustable vertical direction of the left and right cross chuck 110mm, transverse 2mm, the chuck also has a micro rotation adjustment, its range is 0-30�°. f, workpiece, grinding wheel, workbench, cooling pump, oil pump are driven by a separate motor. g. Hydraulic and electrical interlocking mechanism is adopted for workbench and grinding wheel frame, which can ensure safety no matter in adjustment or grinding due to operational errors. The grinding wheel frame is equipped with reliable protective cover.
The scope of application Applied to the ships with the length 50m or above 50m as lamp signal liaison when night navigation. Products characteristic 1.The shell is made of high-strength engineering plastic PA+GF,the lampshade adopts injection of PC,lens hood adopts good quality stainless steel. 2.The signal lights have the whole seal structure,it is waterproof under the harsh environment. 3.The signal lights use exclusive LED illuminant which accords with ship rules and reguations,More energy efficient,longer working life. 4.The signal lights can work normally under the temperature -30~55 . Adopt standard GB/T 3028,MSC 253(8)resolution,THE INTERNATIONAL REGULATIONS FOR PREVENTINGS COLLISION AT SEA,1972 and GRADE ENTRY NORMS FOR STEEL SHIPS. Production patent Patent No:20172155879 Rated voltage AC100-240V 50/60Hz,DC24V Protection class IP56 Cable outside Diameter 10~12 Iluminant LED
Eco-Friendly Woven Pandan Leaf Bag We are proud to present the "Eco-friendly" woven pandan leaf bag - a work of art that combines natural beauty with environmental concern. Each bag is handmade by skilled artisans, using sustainably harvested pandan leaves. Eco-Friendly: This bag is an eco-friendly choice for a modern lifestyle. Natural raw materials from pandan leaves demonstrate our commitment to environmental conservation and reducing carbon footprints. Skilled Hand Craftsmanship: Each bag is woven with care by local artisans who have honed their skills over the years. From the pandan leaf harvesting process to the weaving process, every step is carried out carefully and meticulously. Beautiful and Functional Design: This bag is not only aesthetically beautiful, but also very functional. With enough space to store your everyday items, this bag is the perfect combination of beauty and utility. Sustainable Lifestyle Choice: By choosing "Eco-friendly" woven pandan leaf bags, you not only get a high-quality product, but also contribute to environmental protection and empowerment of local communities. Come join us on our journey to support sustainability and natural beauty by using environmentally friendly products. With every purchase, you also choose to be part of positive change towards a greener future.
Eco-Friendly Woven Pandan Leaf Bag We are proud to present the "Eco-Friendly" woven pandan leaf bag - a work of art that combines natural beauty with environmental concern. Each bag is handmade by skilled artisans, using sustainably harvested pandan leaves. Eco-Friendly: This bag is an eco-friendly choice for a modern lifestyle. Natural raw materials from pandan leaves demonstrate our commitment to environmental conservation and reducing carbon footprints. Skilled Hand Craftsmanship: Each bag is woven with care by local artisans who have honed their skills over the years. From the pandan leaf harvesting process to the weaving process, every step is carried out carefully and meticulously. Beautiful and Functional Design: This bag is not only aesthetically beautiful, but also very functional. With enough space to store your everyday items, this bag is the perfect combination of beauty and utility. Sustainable Lifestyle Choice: By choosing "Eco-Friendly" woven pandan leaf bags, you not only get a high-quality product, but also contribute to environmental protection and empowerment of local communities.
200A/250A/300A/400A/500A/630A� DC TIG Welder/MMA Welder/DC Welder/TIG Welding Machine Lift TIG/Hf TIG Welding Machine, Tig Welder, Welding Equipment, Arc/MMA/ZX7 Welding Machine, Inverter Welding, Dc Welder, Welding, Welder, Arc Welder, Power Tool, Welding Solder, Tig Welding, Tig Welder, Mig Welding, Ac Welding Machine, Plasma Cutter, Cutting Machine, Plasma Cutting Machine, welding helmet and power tools. Features: 1.Intelligent interface conversion 2.Adopt� IGBT single tube/single module to ensure reliability 3.Unique switching power supply,wide application range of power supply 4.SMT chip design,ensure the duty cycle 5.32-bit microcomputer chip processor,real-time current display 6.Advanced high-efficiency inverter technology,30khz,high working frequency 7.Usable for generator, suitable for field operation 8.Automatically save the parameters of the last operation 9.Overheat,overvoltage,undervoltage protection to prevent machine damage 10.Suitable for acid,alkaline,high strength electrode and other welding electrode 11.Coloered LCD display,easy to use
Rack Lithium Battery Designed with reliability and efficiency in mind, rack mounted lithium batteries provide uninterrupted power for your servers and critical systems. With their compact design and optimized energy density, our server rack batteries integrate seamlessly into your existing setup, ensuring maximum uptime and preventing power outages. Deliver the power and reliability your business needs to keep your operations running smoothly and protect your valuable data with server rack batteries. Core technology strength of rack mounted lithium battery Energyland is constantly pursuing breakthroughs in battery performance, putting lithium batteries with higher capacity, higher safety, smaller size and longer life into lithium battery racks, fully integrating excellent performance with compactness and flexibility, with absolute advantages in size, layout, operation and maintenance, cost, etc., so as to make lithium batteries more widely used and to provide more choices, such as battery management systems. lifepO4 battery racks are available for customers with different needs.
With the growing demand in the automotive interior industry, the requirements for products are getting higher and higher. ShunDe company produces CNC equipment mat cutting machine cutting speed and high precision. Easy to operate, no safety hazards, support shaped cutting. It is suitable for all kinds of car foot mats. Car foot mat cutting machine features 1.can achieve high-speed stability, smooth, accurate and efficient cutting moulds 2.Environmental protection, save labour cost 3. Can achieve shaped cutting, simple operation 4. Can achieve automatic loading and unloading, more intelligent Why use car foot mat cutting machine Compared with the traditional process in the past, the appearance of the cutting machine greatly improves the working efficiency and reduces the labour cost, a machine can produce a set of car foot mats in about 7 to 8 minutes, and can be completed by only one person operation. It can help users to complete the high quality cutting effect more stably and accurately.
Garden gazebo. Garden table with benches and canopy. The best solution for a countryhouse. Own development of the company "RUD E.S." The production uses the best materials from the world's leading manufacturers: industrial varnishes "Renner" (Italy) and thermoplastic paints "Pullron" (Turkey) The canopy roof fabric is Navigator with UV protection and water-repellent properties. Full set. L*W*H - 2200 mm * 2500 mm * 2000 mm Can be equipped with an anti-mosquito tent. Peculiarities: the benches and the table are made of Carpathian spruce boards, treated with Renner antiseptic, coated with Renner varnish (Italy). Industrial furniture varnish with water-repellent additives, resistance to ultraviolet radiation and various weather conditions guarantees durability in harsh operating conditions. The color of the awning is in perfect harmony with the color of the frame and roof. Metal parts are painted with special polyethylene powder paint Pullron, which is anti-vandal, anti-graffiti, repairable and anti-corrosion (do not confuse with polyester powder paints). 20 year warranty on paintwork.
Ceramic Fiber Rope Ceramic fiber textile includes ceramic fiber cloth, strap, twisted rope, round braided rope and square braided rope. All are made from our high quality ceramic fiber material. They can be used for high temperature applications up to 2300°F. The rope is reinforced with fiberglass filament, and optional Inconel/alloy steel wire. Ceramic fiber textiles (cloth, tape and rope) contain a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property. ROSEWOOL ceramic fiber rope is a woven fabric made from high quality ceramic fiber woven yarn .Ceramic Fiber Rope can can add glass fiber and stainless steel wire reinforcement according to different work temperature and work conditions. Good compression strength Non-toxicity, environmental protection Low thermal conductivity and low thermal capacity Good antacid oil resistance and water vapor resistance Common applications: door seals or caulking for ovens, furnaces and boilers, expansion joints, cable or pipe wrapping, high temperature seals or gaskets. widely used in welding, foundry works, aluminum and steel mills, boiler insulation and seal, exhaust systems, shipyards, refineries, power plants and chemical plants.
Ceramic Fiber Blanket Introduction Rosewool ceramic fiber blanket has excellent specialties of low thermal conductivity, good heat stability, thermal shock resistance and tensile strength, good thermal insulation, fire proof and noise reduction. It is widely used in power generation, iron and steel, aluminum/n-ferrous metals, glass, ceramics, aerospace, super alloys, petrochemical, semiconductors, cement, automotive, domestic appliances etc. Temperature level is 1100-1430 (2012 --2600 ). Ceramic Fiber Blanket Application 1. Linings and back-up insulation for all types of furnaces, heaters and kilns 2. External insulation such as boiler, turbine, duct and piping, precision casting shell etc 3. Vehicles and domestic appliance insulation 4. High temperature sealing material such as ladle lid, duct connecting part etc 5. Noncombustible materials for building 6. High temperature gas filtration material, high temperature part sound absorbing material 7. Pressure and cryogenic vessel fire protection 8. Furnace repairs Rosewool Company Supply Ceramic Fiber, Rock Wool, Calcium Silicate Products, Glass Wool, Airgel Felt, Airgel Board With 30+ Years Of Experience. Contact Us For The Best Quotation!
Lithium battery Rail impact wrench machine Vertical double lithium electric torque wrench (model: U-LD81901) is a railway digital display torque wrench with vertical operation and double lithium electric protection technology, and its working torque is>3000N m. The torque value is adjustable and controllable, which is specially used for various railway bolt operations. The vertical double lithium electric torque wrench (model:LJ - LDB1901) is composed of a control lever, a motor, and a reducer. It adopts the unique ergonomic flat impact principle, which makes the machine more safe, labor-saving, and efficient. Its unique overall waterproof design ensures the all-weather construction needs. Torque regulation and compensation can make torque control more accurate to meet construction requirements. Model Battery Rail power wrench LJ-LD81901 Rated voltage (DCV) 18-36 Max. torque 3000 N.m motor speed (RPM) 0-3000 optional impact frequency (BPM) 0-5000 optional battery pack capacity (ah) 18-36 operating temperature range (-40 ~ 50 ) torque control adjustable and controllable
NGM-5.1 Rail Profile Grinding Machine This machine is mainly used for forming and grinding operations of railway rail welding joints and rail surface repairs. The development and application of the CNC feed unit realizes the intelligent control of the grinding wheel feed. Significantly improve the profiling accuracy and polishing efficiency. BENIFITS â?? Angle of the grinding head is set using an adjustment wheel, lowering/raising of the grinding stone is electrically contlled â?? Equipped with spark protection device â?? Equipped with electric control system prevents over grinding by limiting the lowering of the grinding stone â?? Grinds the whole head of rail in one single operator, no need to turn the machine or to handle it Specification Model NGM-5.1 Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) 1500 * 450 * 750 mm Engine HONDA GX270 Power 5.1 kW Grinding wheel specifications �?125x65 mm Feeding accuracy 0.1 mm Turning angle of grinding stone �±90�° Spindle revolution 4100r/min Grinding stone feeding stroke 42 mm Profile wheel span 1000 mm Weight 100 kg Weight of supporting rod 14 kg
Place of Origin Hubei, China Type Sleeper Drilling Machine Material Stainless Steel Dimensions (L x W x H) (mm) 420*500*1070mm Brand Name Linkage ENGINE 2 stroke petrol engine 1.42kW Max. drill diameter 20mm Drill speed â?¥350r/min Drill speed2 â?¤20s Weight 14kg NZMZ-20 Portable Sleeper Drilling Machine This machine is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers ensuring precision andmaximum safety for the operator. It is composed of: * 4-stroke petrol engine with valves at the top and special lubrication to work on 360�°; * High-strength speed reducer gears lubricated by special TK3 grease that guarantees excellent lubrication and long life; * Ergonomic handle with throttle lever and engine safety lock; * Safety system with centrifugal clutch; * Possibility of inserting a lever able to rotate the drill bit in case of blockage; * Quick coupling / uncoupling spindle of the drill bit. Optionally we can supply: * Drill bit protection and drilling depth regulator ; * Trolley with 3 wheels for different types of track gauge; * SleeperDrill Bits.
PVC Compound is Polyvinyl Chloride, which is one of the important and most accepted raw materials, used for making several end-products, including, footwear soles, bottles, pipes, films, rubber hoses, and other specific products. Its use in different manufacturing depends on the grade you are using, so be specific with your choice to get optimum results. This has a huge demand in several applications and TP Polymer Private Limited - one of the best PVC Compound Manufacturers in Delhi has been involved in catering to that huge demand and we specifically deal in PVC Footwear Compounds. Features: It is formulated using plasticizers and helps to make flexible materials. Have low thermal stability and a low carbon footprint. Pollution-free and can be recycled, which makes it an environment-friendly choice. Designed using high-quality lead-free chemicals that benefit the user's manufacturing process while keeping the environment protected. Very flexible and can be easily molded into different shapes as per the need. Resistant to chemical and environmental challenges. Very light in weight and can be converted into different forms. 100% solid and multi colors including, Natural, White, Foam, Transparent, etc. are available on demand.
This product is customized as drilling mud based on good quality attapulgite clay. And it is applicable to geological drilling, marine drilling and geological drilling in salt containing area. It features good thermal stability and salt resistant property, therefore, the number of rejected wells will be small while using it to protect the wall of wells, and the drilling efficiency is improved and the cost is cut down as well. Production performance and its application 1. This product features good colloidal and suspending properties, and is suitable to be used as drilling mud under various geological conditions. 2. Because of good thermal stability, it shows no flocculation or dilution under high temperature, therefore, it is applicable to deep drilling and terrestrial heat drilling. 3. Its salt resistant ability makes it free from being affected by electrolytes, thus it can still be in mud form even in saturated brine. It is appropriate for marine and salty stratum drilling. Technical specifications (conform with GB5005-2002) API-13 Preparation of product Add water to the product and stir the mixture in a homogenizer for 20 minutes. Then put in synergist and dehydration-weakening agent, etc. to prepare the required mud. Packing material and specifications Braided bags, paper-and-plastic bags and paper bags Specifications (as per bag): 25kg , 40kg , 500kg and 800kg
Rail Cant Measurement Device The main part of the wheel tread is an inward inclination of 140 In order to make the top of the rail track under the wheel load with cone tread stressed uniformly decrease load offset reduce rail web stress avoid slit between rail head and rail web the railway track shall not be laid upright for straight line it shall be inward inclined this inward inclination of rail called Rail Cant it is a high precision portable numeric rail geometrical testing tool Benefits 1Stable performance protect electromagnetic interference 2One piece structure design light and handy 3magnetic selfabsorption function 4Data display is clear and intuitive 5The function of temperature of environmental temperature factors on the measurement data 6Power saving function The system will shutdown automatically if there is no operation in 5 minutes Specification Model JGSO1 Type Rail Cant Measuring Device Material Aumunium Dimensions L x W x H 2009060mm Measure range 110 1200 Power 40mA Power Supply Mode Builtin lithium battery charging Size 2259060mm Working temperature 30 60
NZMZ-20 Portable Sleeper Drilling Machine This machine is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers ensuring precision andmaximum safety for the operator. It is composed of: * 4-stroke petrol engine with valves at the top and special lubrication to work on 360�°; * High-strength speed reducer gears lubricated by special TK3 grease that guarantees excellent lubrication and long life; * Ergonomic handle with throttle lever and engine safety lock; * Safety system with centrifugal clutch; * Possibility of inserting a lever able to rotate the drill bit in case of blockage; * Quick coupling / uncoupling spindle of the drill bit. Optionally we can supply: * Drill bit protection and drilling depth regulator ; * Trolley with 3 wheels for different types of track gauge; * SleeperDrill Bits. Specification Modelï¼?NZMZ-20 Typeï¼?Sleeper Drilling Machine Materialï¼?Stainless Steel Dimensions (L x W x H)ï¼?420*500*1070mm ENGINEï¼?2 stroke petrol engine, 1.42kW Max. drill diameterï¼?20mm Drill speedï¼?â?¥350r/min Drill speedï¼?â?¤20s Weightï¼?14kg
Steel Security The fence is made of hard steel plate, without a mesh or frame structure, which is beautiful, durable, convenient for transportation and installation. Steel guardrails come in various colors to choose from, and many countries have used them to replace traditional brick walls, heavy wire guardrails, and wooden fences. Metal Security Fence Metal security fence is a type of fencing system made from various metals, such as steel or aluminum, and designed specifically to provide security and protection for a property or area. These metal security fences are widely used in both residential and commercial settings to deter unauthorized access, prevent trespassing, and enhance safety and privacy. The metal security fence is made of hard steel plate, without a mesh or frame structure, which is beautiful, durable, convenient for transportation and installation. Steel guardrails come in various colors to choose from, and many countries have used them to replace traditional brick walls, heavy wire guardrails, and wooden fences. The guardrails are widely used in courtyards, gardens, airports, factories, entry ports, and so on.
