Sand Rotary dryer is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier. Sand Rotary dryer special features as follows: 1. Sand dryer is made of wear-resistant manganese plate, 3-4 times wear-resistant than ordinary steel plate. Raw material is with moisture within 15%, and moisture of dried material is lower 0.5-1%. Compared to traditional single cylinder drying machine, its thermal efficiency can be improved about 40% or more. 2. The outside cylinder temperature is lower than 60 degrees, and the waste gas temperature is lower than 120 degrees, and the service life of dust collector bag is more than twice of that of other collector. Coal consumption is one-third of the single cylinder dryer, save electricity 40%, with per ton consumption of standard coal lower than 9 kg. The sand dryer mainly consists of rotor, shed plate, transmission device, support device, seal ring, and other spare parts. The rotary dryer has the advantages of reasonable structure, excellent manufacture, high output, low energy consumption, convenient operation and so on.
Sand Rotary dryer is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier. Sand Rotary dryer special features as follows: 1. Sand dryer is made of wear-resistant manganese plate, 3-4 times wear-resistant than ordinary steel plate. Raw material is with moisture within 15%, and moisture of dried material is lower 0.5-1%. Compared to traditional single cylinder drying machine, its thermal efficiency can be improved about 40% or more. 2. The outside cylinder temperature is lower than 60 degrees, and the waste gas temperature is lower than 120 degrees, and the service life of dust collector bag is more than twice of that of other collector. Coal consumption is one-third of the single cylinder dryer, save electricity 40%, with per ton consumption of standard coal lower than 9 kg. The sand dryer mainly consists of rotor, shed plate, transmission device, support device, seal ring, and other spare parts. The rotary dryer has the advantages of reasonable structure, excellent manufacture, high output, low energy consumption, convenient operation and so on.
Coconut Shell Charcoal : In general, shell charcoal is made by burning coconut shells in a limited supply of oxygen. It should be used clean, fully dried and mature shells in order to get high quality charcoal. The drum method of making coconut shell charcoal. The drum kiln is one of the most widespread methods of coconut shell carbonization. Shell charcoal is used widely as domestic and industrial fuel. It is also used by blacksmiths and goldsmiths and in laundries. Shell Charcoal is also used to produce activated carbon. Activated Carbon produced from coconut shell has certain specific advantages as the raw material can adsorb certain molecular species. Activated charcoal is a highly absorbent material with millions of tiny pores that can capture, bind, and remove unwanted materials. The porous surface has a negative electric charge that attracts positively charged toxins and gas to be carried easily out of the body. Coconut Shell Activated Carbon is widely used as a water purifier. Activated carbons that are manufactured from the shell of the coconut are of better quality and effective as compared to those manufactured from other sources. Coconut Shell Charcoal is an important product obtained from coconut shell. Shell charcoal is used widely as domestic and industrial fuel. Active Pharmaceutical ingredients Pure powdered activated carbons are extensively checked for quality by employing various quality testing procedures. - Extreme hardness - Low dust generation - Excellent purity with less than 3-5% ash content
Cloves Cloves, derived from the dried flower buds of the Syzygium aromaticum tree, are a highly sought-after spice that is exported from India. Known for their strong, aromatic flavor and warm, sweet aroma, cloves are widely used in culinary applications and various industries. When describing cloves for exporting from India, you can highlight their quality, appearance, flavor, aroma, culinary uses, and potential medicinal benefits. Hereâ??s an expanded description: Cloves from India are highly regarded for their quality, flavor, and versatility. We are committed to delivering premium-quality cloves that meet your exporting needs and enhance the culinary experiences of your customers Appearance : Cloves are small, dark-brown, nail-shaped buds with a distinctively textured surface. They have a hard and woody texture, indicating their quality and durability. The buds are hand-picked when they reach their prime maturity to ensure the highest quality of the spice. Flavor and Aroma : Cloves have a strong, pungent, and slightly sweet flavor with a hint of bitterness. They offer a warm and aromatic fragrance that is both soothing and invigorating. When used in cooking or baking, cloves infuse dishes with their signature spicy-sweet taste and rich aroma. Quality and Processing : We prioritize the quality of our cloves throughout the production process. Our cloves are sourced from trusted farmers who employ sustainable farming practices. The buds are carefully harvested, dried, and sorted to ensure only the best-quality cloves are selected for export. Our cloves are processed using advanced techniques to retain their natural flavor, aroma, and essential oil content. Culinary Uses : Cloves are a versatile spice used in a wide range of culinary applications. They are an essential ingredient in spice blends, marinades, curries, stews, and baked goods. Cloves add depth and complexity to dishes, enhancing their flavor profile with their distinctive taste and aroma. They are particularly popular in desserts, mulled beverages, and savory dishes like biryanis and roasted meats. Medicinal Benefits : Cloves have been used for centuries in traditional medicine for their potential health benefits. They are believed to possess antioxidant, anti-inflammatory, and antimicrobial properties. Cloves are often used to soothe digestive issues, relieve toothaches, alleviate respiratory conditions, and support overall well-being. Packaging : We offer various packaging options for cloves, including bulk packaging and consumer-sized packs. Our packaging materials are designed to preserve the freshness, flavor, and quality of the spice. We can provide customized packaging solutions based on your requirements, ensuring convenience and product integrity for end consumers
Kokam, also known as Garcinia indica, is a tropical fruit native to India that is widely used in culinary and medicinal applications. The fruit is harvested and processed to produce kokam products, including kokam juice, kokam concentrate, kokam syrup, and dried kokam rinds. When describing kokam for exporting from India, you can highlight its quality, appearance, flavor, aroma, culinary uses, and potential health benefits. Here an expanded description: Kokam products from India are highly regarded for their quality, unique flavor, and versatility. We are committed to delivering premium-quality kokam products that meet your exporting needs and enhance the culinary experiences of your customers. Appearance : Kokam fruits have a round or slightly oval shape and a deep reddish-purple color when ripe. The fruit is about the size of a small plum, with a smooth and shiny skin. Inside, the fruit contains several lobes, each containing a seed surrounded by a fleshy, tart pulp. Quality and Sourcing : We prioritize the quality of our kokam products from sourcing to processing. Our kokam fruits are sourced from trusted farms known for cultivating high-quality varieties. We ensure that only ripe and mature fruits are harvested and processed to maintain the freshness, flavor, and superior quality of our kokam products. Flavor and Aroma : Kokam has a unique tangy, sweet, and slightly sour flavor that is highly refreshing. It has a distinctively pleasant aroma that is reminiscent of citrus fruits. Culinary Uses : Kokam is a versatile ingredient used in various culinary preparations, especially in Indian cuisine. Some popular culinary applications of kokam include: Beverages : Kokam juice and kokam concentrate are used to make refreshing drinks, mocktails, and traditional Indian summer coolers. They provide a tangy and refreshing flavor profile. Sauces and Chutneys : Kokam is used in making tangy sauces, chutneys, and dips. It adds a zesty and sour taste to these condiments. Curries and Gravies : Kokam is added to curries and gravies to provide a sour and tangy taste. It balances the flavors of other spices and ingredients. Pickles and Preserves : Dried kokam rinds are used in making pickles and preserves. They impart a tangy and slightly sour taste to these preparations. Health Benefits : Kokam is known for its potential health benefits and is used in traditional medicine. It is believed to have antioxidant, anti-inflammatory, and digestive properties. Kokam is also known for its cooling effect on the body and is often consumed during hot weather to alleviate heat-related ailments. Packaging : We offer various packaging options for kokam products, including bottles, jars, and pouches. Our packaging materials are designed to preserve the freshness, flavor, and quality of the kokam products. We can provide customized packaging solutions based on your requirements, ensuring convenience and product integrity for end consumers
Food materials including fresh and dried vegetables, fruits & spices.
PET Bottle Recycling Machine A large number of waste PET bottles come from the daily consumption of bottled beverages, resulting in waste of PET bottle resources and environmental pollution. Our PET bottle washing and recycling machine is specially designed to recycle and reprocess waste plastic PET bottles, Coke bottles, Pepsi bottles, mineral water bottles, beverage bottles, etc. After processing by our PET bottle recycling machine, the final PET bottle flakes will have less than 1% moisture content and the dried and clean PET bottle flakes can be sent to our pelletizing machine for direct pelletizing. We can provide PET bottle recycling machines with capacities from 300kg/h to 3000kg/h. The end product PET bottle flakes are of stable quality and have various application grades. The PET bottle flakes, which are cleaned by the PET recycling machine, can be used for the production of polyester staple fiber, PET tape, pellets, PET transparent film flakes, etc. The high-grade PET bottle flakes can also be used for the secondary molding of PET bottles. Easy to use, high performance plastic recycling machine PET recycling machine's efficient, one-step plastics recycling machine is designed for the reprocessing of printed and non-printed PE polyethylene (HDPE, LDPE, LLDPE) and PP polypropylene flexible packaging materials. This knife integrated pelletizing system eliminates the need for pre-pelletized material, requiring less space and energy consumption, while producing high quality plastic pellets at high productivity.
A large number of waste PET bottles come from the daily consumption of bottled beverages, resulting in waste of PET bottle resources and environmental pollution. Our PET bottle washing and recycling machine is specially designed to recycle and reprocess waste plastic PET bottles, Coke bottles, Pepsi bottles, mineral water bottles, beverage bottles, etc. After processing by our PET recycling machine, the final PET bottle flakes will have less than 1% moisture content and the dried and clean PET bottle flakes can be sent to our pelletizing machine for direct pelletizing. We can provide PET bottle recycling machines with capacities from 300kg/h to 3000kg/h. The end product PET bottle flakes are of stable quality and have various application grades. The PET bottle flakes, which are cleaned by the PET recycling machine, can be used for the production of polyester staple fiber, PET tape, pellets, PET transparent film flakes, etc. The high-grade PET bottle flakes can also be used for the secondary molding of PET bottles. Easy to use, high performance plastic recycling machine PET recycling machine's efficient, one-step plastics recycling machine is designed for the reprocessing of printed and non-printed PE polyethylene (HDPE, LDPE, LLDPE) and PP polypropylene flexible packaging materials. This knife integrated pelletizing system eliminates the need for pre-pelletized material, requiring less space and energy consumption, while producing high quality plastic pellets at high productivity.
Moringa Leaf Indonesia Origin Raw Material & Finished Products Our company is one of very few specialist company in the world dealing only with moringa products. We are the only producer and exporter of Indonesia Origin Moringa Oil in the world. We also exports Dried Moringa Leaves and Moringa Leaf Powder from local farms to the world. We would like to offer our high quality Moringa Powder products to your company. We are certain that we can bring satisfaction to your company with our product, this is because: â?¢ We only supply 100% pure moringa leaf â?¢ USDA and EU Organic Certified â?¢ Available in Powder and Extract form â?¢ We can provide Raw Material as well as Finished Goods â?¢ High quality Moringa Leaf, clean and very minimal stem included â?¢ Processed in low temperature process, nutrients still intact and rich â?¢ Safe from any contaminants and heavy metals â?¢ By procuring from us, you support the livelihood our local farmers that are in partnership with us â?¢ We commit to provide best service before and after sales to your company â?¢ We provide competitive pricing for quality products â?¢ No minimal order to purchase â?¢ Free sample is available (only shipping cost needs to be covered) We can provide raw ingredient as well as finished products. Please inquire us for our product catalog for further information on the finished products.
Moringa Leaf Indonesia Origin Raw Material & Finished Products Our company is one of very few specialist company in the world dealing only with moringa products. We are the only producer and exporter of Indonesia Origin Moringa Oil in the world. We also exports Dried Moringa Leaves and Moringa Leaf Powder from local farms to the world. We would like to offer our high quality Moringa Powder products to your company. We are certain that we can bring satisfaction to your company with our product, this is because: â?¢ We only supply 100% pure moringa leaf â?¢ USDA and EU Organic Certified â?¢ Available in Powder and Extract form â?¢ We can provide Raw Material as well as Finished Goods â?¢ High quality Moringa Leaf, clean and very minimal stem included â?¢ Processed in low temperature process, nutrients still intact and rich â?¢ Safe from any contaminants and heavy metals â?¢ By procuring from us, you support the livelihood our local farmers that are in partnership with us â?¢ We commit to provide best service before and after sales to your company â?¢ We provide competitive pricing for quality products â?¢ No minimal order to purchase â?¢ Free sample is available (only shipping cost needs to be covered) We can provide raw ingredient as well as finished products. Please inquire us for our product catalog for further information on the finished products.
DESCRIPTION Power Screw adhesive is one of ITLS new range of power adhesives developed to give a cost effective and high adhesion performance. It is very low in odor and free of aromatic solvent for use indoor and outdoor. It was designed for use by both the home handy man and professionals. Power Screw adhesive which consists of tough elastomeric rubber, tackifying resins and Light hydrocarbon solvent. Power Screw can be used in most common construction materials. The substrates are timber, plywood, MDF, particle board, hard board, plaster board, cementitious fibrous board, concrete, ceramic, aluminum, ,mild steel, galvanized iron sheet, back of mirror (on wall only). FEATURES *Unique user friendly, highly pseudo-plastic and non runny characteristic making it TRULY easy to use on vertical wall and ceiling. * Extremely easy to extrude from cartridges in winter making it an all round product for use in all seasons. * Gap filling because of its higher solid content and especially it is highly pseudo-plasticity (soft smooth by stiff, non-sagging) property. * Flexible but tough for use around home and in construction * Easy on hand to extrude and apply due to its unique consistency. *Easy to spread our adhesive evenly and thinly due to its soft buttery consistency. * Broad application for most timber based, cementitious substrates, ceramic and most common metallic construction products. * Printable when dried. * Help to spread out pressure on bonded materials thereby prevent localized stress leading to adhesion failure.
Material: TP 304/304L, 316/316L, 201, 202, 310S, 321, 800, 600, etc. Tube delivery condition: bright annealing (BA) Tube type: weld, TAW Coil Lengths: max 3000 m per coil tube Standard: ASTM A269, A249 O.D. from 3 to 25.4mm W.T. from 0.3 to 2.0mm Chemical composition: in accordance with ASTM A269 Mechanical and technical properties: in accordance to ASTM A269 Soft annealed max. Hardness 150 HV10 Tolerance +10 points Model type and surface integrity: in accordance with ASTM A269 Surface roughness Ra < 5 μm Cleanliness of the tubes: bore cleanliness in accordance to DIN 8905. The coils shall be dry, clean and free from swarf, drawn and roller marks. Pressure Test: 100% tested at the appropriate pressure stated under water. All coils must be flushed and dried after pressure testing to avoid contamination. Tolerance: D4/T4, Diameter of ball for ball bearing check PMI TEST 100% GOOD ELONGATION IN 50MM LONGITUDINAL HEAT TREATMENT 1050â?? FOR 5MIN (W.Q.) MEASUREMENTS & SURFACE: GOOD IC ASTM A-262 PRACTICE E.NACE MR0175-MR0103 FLARING TESTING AS ASS. TO ASTM A1016 FLATTENING TESTING IS ACC. TO ASTM A1016 100% HYDROSTATIC TEST AS PER A1016/A1016M MARKING SAMPLE: JW STEEL, TP316/316L, welded, Bright Annealed, ASTM A269, OD3/8'' X WT0.035'' HEAT NO.160326T22 MATERIAL ACC TO ASME SECTION II PART A 2010 EDIT CERT TO EN 10204 3.1 IN ACCORDANCE WITH PED ANNEX 1.PARAGRAPH 4.3
Blast furnace slag capacity:1.5-25(t/h) Cement capacity:3-50(t/h) Raw material capacity:6-110(t/h) Our advantage 1. Comprehensive service We zk company is the professional slag powder production line supplier. We can provide both ball mill and vertical mill production process, while providing 'turnkey' service from civil engineering to commissioning. 2. Serious quality control Zkcorp has a strong capacity of manufacturing and could control product quality seriously with short delivery time. Expert installation and after-service team could ensure to finish plant installation and start running on time 3. Low cost and proper investment. Slag vertical mill production line from zkcorp engages the advantages of simple process flow, high-efficiency of grinding, great drying capacity, efficient powder-classifying, easily-adjustable outputting size, low noise and electricity-consumption, small mill consumption, high degree of automation, low running expense, which make it suitable for small and middle plant owner. Production process by vertical mill Slag is transported into the plant by truck and stored under the shed. After reclaiming by loader and metering by feeder, the material is delivered and de-ironed into the vertical mill by the belt conveyor and its magnetic separator. After de-ironing the slag enter the vertical mill for grinding. Dried and grinded slag powder is collected by the separator and sent into the finished product silo by air chute and bucket elevator. The discharged slag is sent back to the mill by conveyor and elevator. The drying heat source is provided by an air heating furnace.
PRODUCTION PROCESS BY BALL MILL Slag is transported into the plant by truck and stored under the shed. After reclaiming by loader and metering by feeder, the material is delivered into the dryer by belt conveyor for drying. After drying the slag enter the ball mill for grinding. Grinded slag powder is send into the separator by the bucket elevator for grading. Qualified power is sent into the finished product silo by air chute, hoist and elevator. Large particle powders return to ball mill for re-grinding. There is the dust filter at the discharge end of the ball mill. The slag dust is collected and transported into the finished product silo. The drying heat source is provided by an air heating furnace. PRODUCTION PROCESS BY VERTICAL MILL Slag is transported into the plant by truck and stored under the shed. After reclaiming by loader and metering by feeder, the material is delivered and de-ironed into the vertical mill by the belt conveyor and its magnetic separator. After de-ironing the slag enter the vertical mill for grinding. Dried and grinded slag powder is collected by the separator and sent into the finished product silo by air chute and bucket elevator. The discharged slag is sent back to the mill by conveyor and elevator. The drying heat source is provided by an air heating furnace. OUR ADVANTAGE 1.Comprehensive service We ZK company is the professional slag powder production line supplier. We can provide both ball mill and vertical mill production process, while providing 'turnkey' service from civil engineering to commissioning. 2.Serious Quality Control ZKCorp has a strong capacity of manufacturing and could control product quality seriously with short delivery time. Expert Installation and After-service Team could ensure to finish plant installation and start running on time 3 Low cost and proper investment. Slag Vertical Mill Production Line from ZKCorp engages the advantages of simple process flow, high-efficiency of grinding, great drying capacity, efficient Powder-classifying, easily-adjustable outputting size, low noise and electricity-consumption, small mill consumption, high degree of automation, low running expense, which make it suitable for small and middle plant owner.
MJY series vacuum belt dryer is a continuous infeed and discharge vacuum drying equipment, Liquid product is conveyed into dryer body by infeed pump, evently spread on belts by distribution device. Under high vacuum, the boiling point of the liquid is lowered, water in the liquid material is evaporated. Belts move on the heating plates evenly. Steam, hot water, hot oil can be cooling to dischargeing in the end. The temperature decrease through from the begining evaporating, dring, cooling to dischargeing in the end. The temperature decreases through this process, and can be adjusted for different products. Special vacuum crusher is equipped at the discharge end to produce different size and product. The dry powder or granule product can be automatically packed or contunue with subsequnent process. EQUIPMENT ADVANTAGE *Less labor cost and energy consumption * Little loss of products and solvent recycling possible * PLC automatia control system & CIP cleaning systme * GMP standard * Good solubility & excelient quality of the products * Continuous feed-in, dry, granulate, discharge in vacuum state * Complete closed system and no contamination * Adjustable drying temperature(30-150â??ï¼? & and dring time(30-60 min) APPLICATION Vacuum belt dryer(VBD) is mainly used in dring many kinds of liquid or paster raw material, such as traditional & western medicine, food, biological products, chemical not be dried by traditional dryer. For above meterials. VBD is the best choice. Pharmaceutical industrial, food industry, chemical industry.
Appearance Cloves are small darkbrown nailshaped buds with a distinctively textured surface They have a hard and woody texture indicating their quality and durability The buds are handpicked when they reach their prime maturity to ensure the highest quality of the spice Flavor and Aroma Cloves have a strong pungent and slightly sweet flavor with a hint of bitterness They offer a warm and aromatic fragrance that is both soothing and invigorating When used in cooking or baking cloves infuse dishes with their signature spicysweet taste and rich aroma Quality and Processing We prioritize the quality of our cloves throughout the production process Our cloves are sourced from trusted farmers who employ sustainable farming practices The buds are carefully harvested dried and sorted to ensure only the bestquality cloves are selected for export Our cloves are processed using advanced techniques to retain their natural flavor aroma and essential oil content Culinary Uses Cloves are a versatile spice used in a wide range of culinary applications They are an essential ingredient in spice blends marinades curries stews and baked goods Cloves add depth and complexity to dishes enhancing their flavor profile with their distinctive taste and aroma They are particularly popular in desserts mulled beverages and savory dishes like biryanis and roasted meats Medicinal Benefits Cloves have been used for centuries in traditional medicine for their potential health benefits They are believed to possess antioxidant antiinflammatory and antimicrobial properties Cloves are often used to soothe digestive issues relieve toothaches alleviate respiratory conditions and support overall wellbeing Packaging We offer various packaging options for cloves including bulk packaging and consumersized packs Our packaging materials are designed to preserve the freshness flavor and quality of the spice We can provide customized packaging solutions based on your requirements ensuring convenience and product integrity for end consumers
Our coconut oil is produced from raw coconut milk. We do this by centrifugal separation and vacuum cleaning without heating. We know how to extract all fractions of water from oil without heating and this is the most important step to obtain premium quality, few people can repeat our quality. Mostly oils are made from already dried coconut raw materials: from dry chips, copra or desiccated coconut, but this is always low-quality oil and does not have a high biological value. We take fresh organic coconuts, extract the raw coconut pulp, make coconut milk from it and separate the oil from this fresh and raw milk without heating. And imagine that the whole process takes place without stops and delays, conditionally after the start of production in an hour in the jar we clog the freshest, crude and raw oil. For 1 liter of oil we take 13 fresh coconuts. Our oil is tastier, more fragrant, fresher - and it is noticeable immediately. We can send samples so that the chief food technologist of your company can test and everyone will be convinced of this. The other, invisible part is utility. Our oil contains 50-52% lauric acid and 64% MCT of medium-chain fatty acids, which are very useful for the body. Many articles and books have been written about the benefits of coconut oil. We can collect such conclusions and use them for marketing: Strengthens the immune system, Improves hormonal balance, Stimulating the metabolism, Increases the energy level, Fights germs and viruses , Protects the heart - improves the cholesterol ratio, Improves digestion and absorption of nutrients, Supports thyroid function, Helps in weight loss by reducing visceral fat, Improves insulin secretion and blood glucose utilization, Blocks the harmful effects of many toxins and free radicals, It helps in the treatment of degenerative, autoimmune diseases. Does not oxidize fast, Does not emit carcinogens. It is natural antioxidant, antiseptic. It is an alkaline product. Relieves chronic inflammation. All that means that coconut oil not only a delicious food but also a Universal natural medicine.
Diacetyl Tartaric Acid Esters of Mono and Diglycerides Characters: Ivory or straw yellow powder or granular solid which is easily soluble in hot water. It is a non-ionic emulsifier with HLB value of 8-10. Applications: It can produce strong effects such as emulsification, dispersing and aging resistance, so it can be used as good emulsifier and dispersant. (1) It can increase the springiness, toughness and gas-holding capability of dough effectively, reduce its softening degree, increase volume of bread and steam bread, and improve their organization and structure. (2) It can react with amylose to delay and prevent the food aging. (3) It can be used in cream to make it smoother and finer. (4) It can be used in butter and concentrated butter to prevent oil separating and enhance its stability. (5) It can also be sued in sugar, syrup and spices. (6) It can be used in non-dairy creamer to make the emulsion homogeneous , stable and supple in mouth. Usage: (1) Put this product in warm water at about 60 C to get paste shaped substance, and then use it in appropriate proportion. (2) Dissolve this product in oils or fats homogeneously before further processing. (3) Directly mix it with flour for use. Recommended Addition Amount: Addition maximum is 1.0% for raw dried flour products and raw wet products, while 5.0% for non-dairy creamers. The addition amount can be changed based on production need for cream and fermented milk. Technical Index Acid value (Calculated by KOH) / (mg/g) 65-85 Saponification value (Calculated by KOH) / (mg/g) 390-450 Total tartaric acid(W/%) 10-40 Total glycerol(W/%) 11-28 Total acetic (W/%) 8-32 Free glycerol(W/%) 2.0 Ignition residue (W/%) 0.5 Pb/(mg/kg) 2 Packaging Aluminized bag vacuum packing with nitrogen inside. Net weight:20KG/CTN(5 KG *4) Storage & Transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly forbid storing and transporting with materials that is explosive, combustible or deleterious. The shelf life is 12 months.
Microwave industrial tunnel baking and puffing equipment, roasting equipment, microwave baking equipment,continuous microwave nut roasting machine,industrial microwave roasting baking machine , drying and sterilization machinery, widely used in the peanuts ,sesame seeds, wheat, melon seeds, peanuts, corn, soybeans, walnuts, areca-nuts,almonds, chestnuts, pistachios, cashews and dried fruit etc baking.Compared with the traditional production methods, microwave baking foods are crispy and delicious, puffed full of particles, natural color, beautiful appearance, and has insecticidal sterilization. 1 While microwave equipment baking, along with the bactericidal effect. Microwave sterilization reflect in the dual role of thermal effects and non-thermal effects , compared to the conventional temperature sterilization ,can obtain a satisfactory sterilization in lower temperatures and a very short time.The sterilization temperature is around 80? in general,the processing time is 3~5 minutes,and can maintain its nutrients. 2 Easy to operate. Microwave power and the conveyor speed can be sleepless adjustment, there is no thermal inertia, can open and stop at an time, easy to control,improve the production environment.Microwave equipment, no waste heat radiation, no dust, no noise, no pollution, easy to implement the testing standards of food hygiene. 3 The roasting effect is obvious. The purpose of rapid microwave heating effect, make the material internal water molecules vaporize rapidly,then reach the purpose of puffing. 4 Low-temperature sterilization, less loss of nutrients.Retain vitamin C,conventional heating treatment for fruits and vegetables is 46% ~ 50%, but the microwave can reach 60%~90%.Retain vitamin A,conventional heating treatment is 58%,but the microwave can reach 84%,and does not affect the original flavor, is a good method for deep processing of fruits&vegetables and get green foods.
Greetings from Vietnam Have you ever been purchasing CORN COB MEAL for producing ANIMAL FEED or Mushroom cultivation??? We are KIM MINH EXIM CO., LTD specialized in producing and supplying CORN COB MEAL besides CORN SILAGE, SUGAR CANE BAGASSE, TAPIOCA RESIDUE, BREWER DRIED POWDER could be used as material for fertilizer/compost and for animals feed. CORN COB MEAL Size: 1mm - 6mm Moisture: 14% Max Metal Cleaning , Pet litter and Medium for mushroom and so on 1. Polishing: can be used to wipe, dry grinding, metal or plastic, glass and other products. 2.adsorbability, adsorption at four times its weight of the liquid, is a great development of activated carbon resources.It is used for the wet water sports venue absorption, drying, and chemical waste absorption, a large area of water surface greasy dirt cleaning. 3.The non-toxic for feed industry: vitamin, condiment carrier. 4.Chemical stability: it is a kind of good medicine, chemical carrier. 5.Corncob as animal feed. Packing: 35kgs- 40kg/ PP bag Or 600kgs/ Jumbo bag Stuffing: 24Mt/ cont 40'HQ We assure that we can supply products in large quantity, high quality with a very competitive price. For more informations or orders, please do not hesitate to contact with us. I am looking forward to hearing from you soon. Phan Huynh Tel: +84787451711 Skype: PhanHuynh.KME Whatsapp/Mobile: +84787451711 Email: thanhquy(at)kimminhexim(dot)com GOOD DAY TO YOU! Thanks and Best Regards. logo 1.jpg KIM MINH EXIM CO., LTD Address: 43 Mac Dinh Chi, Dakao Ward, Dist , Ho chi minh City.