We hold immense expertise in making available Copper in many forms including LME registered and non registered cathodes, billets, rods, cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire, insulated wire, mesh and “evaporation slugs”. Copper is one of the most important metals. Copper is reddish with a bright metallic lustre. It is malleable, ductile, and a good conductor of heat and electricity (second only to silver in electrical conductivity). Its alloys, brass and bronze, are very important. Monel and gun metals also contain copper. The most important compounds are the oxide and the sulphate, (blue vitriol
Brass rods, brass sheets, brass coils copper sheets, copper coils, copper busbars.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Stainless steel various utensils, cutlery, kitchen tools. like bowls, colanders, baskets, trays, platters, cookware, tongs, kitchen tools, serving tools, cutlery various spoon, fork, knife, bar articles, pet bowls, dog bowls, waste bins, mugs, coffee warmers, stock pots, food carriers, pots and pans, canisters, mess trays with a compartment in round and rectangle, oval plate, egg whisks, tea strainer, soup strainers, rice plate, soup plates, graters, salad servers, rest spoon, wire hangers, s.s. wire items, utility tongs, ice tongs, dinner sets, induction friendly cookware, sauce pans, kadai, casseroles, hot pots, steamers, milk pans, champagne bowls & buckets, ice buckets, napkin holder, coaster sets, ash trays, peg measures, double wall bowls, double wall ice bucket, double wall wine cooler, cocktail shakers, lid bowls, puri dabbi, bread baskets, fruit baskets, extra deep bowls, stock pots and as per buyer need kitchenware products we will make and supply.Exporter
Non-Sterile Medical Examination Nitrile Gloves Powder free & Latex free 100% Virgin raw materials with FDA certificate & as per ASTM D6319/ CE EN 455 Quality standard: ASTM D6319, with 510K and FDA, CE/EN455, Color: Blue, white Finger Tips: textured Cuff: Beaded Pcs per Box for S/M/L/XL : 100pcs/box Origin: China, Vietnam, Thailand, Malaysia Benefits Protection from unwanted and harmful substances Beaded Cuff ensures easy donning and prevent roll down Superior Strength with better Puncture resistance Finger Tip Textured enhances wet and dry grip Thinner Guage improves tactile senstivity Custom Design enhances comfort and fit Provide an Alternate Solution for individual who are allergic to natural rubber latex Material : Synthetic Nitrile Type : Non-Sterile Powder Free, Amibidextrous, Finger Tip Textured, beaded cuff. Storage: Store in a dry and cool place, the temperature not higher than 38�° C Shelf life: 2 years Physical Properties Tensile Strength: Before Aging 14Mpa min Tensile Strength: After Aging 14Mpa min Elongation at Break (%): Before aging 500% min Elongation at Break (%): After aging 400% min Length: 230 mm in XS, S, M, L, XL Width: 70+/- 10 (XS) Width: 80+/- 10 (S) Width: 95+/- 10 (M) Width: 110+/- 10 (L) Width: 120+/- 10 (XL) Thickness Single wall ( mm): Fingers 0.050mm min Thickness Single wall ( mm): Palm 0.050mm min
Basin faucet, kitchen faucet, shower faucet, bathroom accessories, copper scraps, brass ingot, brass bar.
New arrived hexagon brass female hose barb fittings pneumatic fittings Specifications Used in garden or industrial machine. Made by numerically controlled lathe. All general sizes for clients to choose. Item name: brass female hose barb fittings Material: brass bar, brass pipe. Technology: cutting by numerically controlled lathe Surface treatment: plated or pickling. Thread type: npt, npsm, bspp, bspt and so on standard thread. Use: use for plumbing, sanitary ware, machine part and so on.
Round Bars Size: 8mm to 400mm Length: 3-12m Grade: ASTM A240,GB/T3280-2007,JIS4304-2005,ASTM A167 Material: SS400 S45C S20C Application: Ship building industry, Petroleum & Chemical Industries, Electricity Industry, Food Processing, Medical Industry, Boiler Heat Exchanger, Machinery and Hardware fields.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
We are manufacturer & exporter of Brass Neutral Links. They are designed with the intention of minimising issues during installation. The screws minimize the risk of shearing, stripping and cross threading which each hole is clearly identified with an engraved number. Brass Neutral Links are available in various configurations. Brass Neutral Links and Bars are used for ground or earth in mains electrical wiring system which provides a low impedance path to the earth to prevent hazardous voltages from appearing on equipment. Terminal Blocks are all developed exclusively as per Customers design & specification. Application : Used in Street Light Isolator, Distribution Board, Switchgear, Electrical Panels Boards, Electrical and Telecommunication, Circuit breaker, RCD, etc. In MCBs ELCBs and Isolators to protect the installation For termination of neutral and ground wires on bus bar For termination of Rated Conductors For mounting of DIN Rails and clamp type For surface mount applications Designed for Easy Installation and Termination Carries current back to the source Material : Free Cutting Brass, High Tensile Brass, CDA 360 Brass, Alloy 360 Brass, CDA 230 Brass. Size : Begins from M2 or equivalent threads, 2 ways to 50 ways. Length : 1 meter to 15 meter or as per customers requirement. Suitability : 70Amp, 90A, 110A, 165A through 350Amp Screws : Steel Multi-Head, Zinc plated - Headless set screw, Headed slotted machine screw, Headed machine screw combination & square slot, Headless Hex socket, etc. Finish : Natural, Nickel Plated, Tin Plated, Chrome Plated, Electrolyte Tin Plated or any coating as per customer specification. Features : Lighter and easier to handle. The use of modern polymer channel has reduced the weight of the products making them easier to handle. Pre-Drilled fixing holes for ease of installation. Plastic channel base is entirely corrosion proof. High Durability, Tensile strength and Resistant to adverse conditions.
Handicrafts of iron, copper, brass, ss, aluminum, glass, etc decor artwares and furniture utilities such as wall decor, hangings, frames, pedestals, stakes, small garden fountains, table utilities, vases, stands, statues, etc..Buying agency
Brass and S.S..
THE BEST AND WORLD CLASS QUALITY PRODUCT. Commodity Name:- MS Brass (Made in Bharat) Melting Temperature:- 1000'C to 1050'C Density:- 8.60g/cm3 Product Colour:- Yellow Uses & Application :- General (Handwork, Casting, Rolling, Tubing) Contains :- Cu+Zn with light(Au) Gold Process Minimum Sample Order Qty.:- 20kgs. Note:- MS Brass is suitable for manufacturing of all type of High Quality's Imitation Jewellery and general Brass Products.
Threaded Brass Inserts 8-32
Threaded Brass Inserts 6-32
Threaded Brass Inserts 4-40