Hipped geomembrane for landfill closures waterproof liner 0.1mm-3mm/m2 1. Geomembrane specifications 1) Thickness : 0.15mm - 4.0mm. 2) Width : Within 8 m (1m-8m). 3) Length : 50m-100m/roll (as request). 4) Material : HDPE,( LDPE, LLDPE, PVC, EVA ). 5) Color : Black , white , red , blue , or as required. 6) Optional surface : Textued(one or two side) or smooth surface. 7) Certificate:CE/ISO9001,14001 2. HDPE geomenbrane Features Good mechanical properties, high tear strength, deformation and adaptable, puncture resistance, anti-aging, anti-ultraviolet-resistant, Anti oil and salt, pH, anti-corrosion, high temperature-resistant, non-toxic, long service life. water, drainage, seepage, the good effect of moisture, width, thickness of the full range of specifications and low cost, simple construction. 3. HDPE Geomembrane Applications 1) Environmental protection, sanitation (such as solid waste landfills, sewage treatment plants, power plants Chi-conditioning, industrial, hospital solid waste, etc.) . 2) Water (such as rivers, lakes and reservoirs of the anti-dam, plugging, reinforcement of the canal seepage, the vertical wall of the heart, slope protection, etc.). 3) Municipal Engineering (subway, on the ground floor of the building, planted roof, the roof garden of anti-seepage, sewage pipes lining, etc.). 4) Landscape (man-made lake, river, reservoir, golf courses reservoirs of the substrate, slope protection, green lawn of the waterproof moisture, etc.). 5) Petrochemical (chemical plants, oil refineries, gas storage tanks of the anti-chemical reaction tanks, sedimentation tanks of the lining, etc.). 6) Mining (washing and pool heap leaching, the ash-field, dissolved, precipitation, the yard, the tailings seepage substrates, etc.) HDPE geomembrane NO. Items Value Common Environment 1 Thickness (mm) 0.2 - 4 2 Width (m) 2.5 - 8 3 Tensile Strength(TD/MD) MPa ?7 ?¥25 4 Elongation at Break(TD/MD) % ?¥4550 5 Strength at Tear(Right-angle Tear) N/m?110 6 Carbon black content % 2.0 - 3.0 2.0 - 3.0 7 Anti-crack F20 ,1500 8 -70low temperature impact brittle prope pass 9 Oxidative Inducement Time at 200°C,m20 LDPE geomembrane NO. Items Value 1. Thickness (mm) 0.2 - 3 2. Width (m) 2.5 - 9 3. Tensile Strength(TD/MD)MPa14 4. Elongation at Break (TD/MD) 400 5. Strength at Tear(Right-angle Tear)N/m50 6. Permeability coefficient of Vapour(g.cm/cm2.s.p)
product characteristics: 1. high-quality stainless steel (SUS316 or SUS304) tube core tube (PTFE) made of Teflon coat, strong corrosion resistance, suitable for all kinds of corrosive liquid heating. 2. low surface power design (1.5KW/CM2), to ensure the service life of the product The installation position of the electric heater 3. need to pay attention to prevent the deposition of solid solution to the surface of the electric heater, or liquid is too thick, too low surface because the surface will spread to keep poor heat and burn Teflon tube (PTFE) 4. the size of the electric heater can not be arbitrarily changed and changed the surface area, otherwise the surface power of the electric heater will be too large, and the service life of the electric heater will be affected 5. all electric heaters can be equipped with overheat protector or PT100 temperature probe, so as to ensure the service life of the product and the safety of the equipment 1. for Teflon (PTFE) tube, excellent corrosion resistance, so it is widely used in the oxidation of acid polishing, electroless plating, electroless plating, electroless nickel plating and various high heating chemical liquid. 2. can design a variety of structural forms, such as spiral type, L type, U type, W type, mosquito repellent incense type, combination type and so on Our company has 3. Teflon heaters mandatory CE certification through the EU market note: all equipment, including a heater and the control element has been inspected strictly before shipment, the purchase date, provide the manufacturing technology and material double a year warranty repair. In normal, if there is any damage under the correct use, offer free maintenance service. But the improper use of customer, misuse, damage caused by installation error. It is not guaranteed. Such as: - solvent - high temperature appears too thick dirt - - solvent - solvent flow stops - use prohibited drugs - - charging occurs - with the use of other acid leads to second chemical reaction Should have - - solvent oxygen or oxidizer - - misconnected - - corrosion action circuit - - welding agent on the surface of the liquid floating - - due to man-made scratch Teflon surface, make the electric heater not work - - gas insoluble when leaving - liquid or liquid level below the heater heating section caused by dry burn other mobile devices. First, product characteristics: Other damages, such as mobile equipment, re installation, unauthorized maintenance and accidental or inevitable damage, etc., are not responsible for the cost of the loss All jinnuoda factory of products with product description. Please refer to the attached pages of the correct selection of the electric heater or contact the company directly. If there is any unknown matters or have any questions about the product, welcome to contact us.
Machine Introduction: The primary method of seed cleaning is the air-screen separator. It uses a combination of air and screens to separate seed based on size, shape, and density. These widely-use units come in a variety of models with two to eight vibrating screens. In all cases, the cleaning principles are the same. The grains are fed into the hopper where they are evenly distributed by a feed roller and transferred through a controlled gate on the top sieve. In the process the grains are subjected to primary aspiration by the use of air trunk which drains off chaff, straw, dust or deceased grains. Then the material is passed through sieve layer for separation according to their width and thickness. After the separation, the graded material is subjected to air sifter and aspiration chamber where remaining light particles are sucked off by a strong upward draught of air. The graded material and the impurities are automatically discharged in separate chutes. These machines are suitable for efficient cleaning of all types of grains and seed. Gentle feeder and the belt guard provide efficient cleaning of grain without causing any damage to the particles. High in functionality, The shoes of the machine can easily be replaced for different type of cleaning. Our range of 5XZC series feed cleaner is specially designed for heavy-duty operation at the most economical prices. Salient Features: Robust machine of all steel construction. Cyclone aspirator fan. Low level feed hopper equipped with feed control gate. Specially designed buber ball to check sieve perforation clogging. Stepless variable air controls. Air Chamber, Sieve Deck assembly and spouts are self cleaning type. Belt guard provided. Sieve reciprocating provided by means of eccentric and connecting rods. Optional Accessories Available: Dust Collector, Air Trunk, Surge Bin, Feeding Elevator. Operation: Seeds/Grains are fed into a feed hopper where they are evenly distributed by a feed roller and drop through a controlled gate on the air sifter and aspiration where light particles are sucked off by a strong upward draught of air top sieve. Before falling on Top Screen, grains are subjected to primary aspiration which drains off chaff, straw, dust, deceased grains etc. Material is then passed through two sieve layer for separation according to width and thickness. Sieve perforations are kept cleaned by specially designed rubber balls.After passing through screens, cleaned/graded material again passes through. Final product and impurities are collected separately through discharge chutes.We are the nitrogen gas machine Chinese supplier.
We provide the full range service including design, manufacturing, installation. We design and manufacture equipment for new type dry method cement production line, for which the capacity varies from 50t/d to 3000t/d. OUR ADVANTAGE 1.High Efficiency Cement production line adopts advanced technology and equipment to raise technical level and to ensure design indexes. New five-stage cyclone pre-heater system, high efficiency air girder grate cooler, multi-passage pulverized coal burner, Davison heat temperature fan, jet pulse dust collector, as well as chain-board elevator, chain conveyor adopted in this production line can ensure that the technology is advanced compared to other production lines with the same scale. 2.Saving Energy Measures have been taken to save energy and reduce consumption. using chain-board elevator and air slides, reliability of the system is enhanced and conveying energy consumption is decreased. 3.Environmental protection Effective measures have been taken to guarantee strict environment protection standards. Different efficient dust collectors are set at all dust producing points according to different characteristics of waste gas. 4. High degree of automation There is no manual operation in the process of mill running, which realizes the automatic control with long-term, stable, effective, makes milling process more stable, realizes fine work of production. Mined limestone is delivered to the crusher for crushing by the belt conveyor, limestone after crushing ,clay, iron powder etc will be ground into powder by ball mill or vertical mill, and then transported by air delivery chute to raw meal homogenization silo for storing and further material mix. Raw meal shall get into the preheating decomposition system after homogenization where decomposition rate is about 95%, and raw meal is calcined into clinker in the rotary kiln, the formation of clinker. Clinker, gypsum and mixture is ground into qualified fineness cement in the cement mill. Powder classifier is adopted to adjust the fineness of cement, realizing energy saving production. Cement packing machine and automatic loading machine are used for bagged cement delivery, and cement bulk device for cement canning leaving factory.
Thermal Break Double Glazing Aluminum French Door 1, Material -aluminum alloy profile, profile thickness from 1.0-2.0mm -Profile sery: Casement/awning/tilt & turn window can be adopted 45/50/55-56/60/65/70mm sery, sliding window can be adopted 70/85/88mm sery.a -Surface treatment: Powder coating in different RAS color. Anodized color/PVDF/wood skin transfer printing/electrophoresis. 2, aluminum window can be designed several types: -sliding windows and doors -casement windows and doors -awning windows(top & bottom opening) -folder windows and doors -tilt & turn windows and doors 3, glasses: -it can be adopted single glass from 4-15mm clear flolat glasses -it can be adopted double insulating glass, such as 5+6+5, 5+9+5, etc. -the glass can be frosted, tempered/tinted/low-e glass, the insulating glass can be filled with argon gas. 4, hardware - all kinds of high quality Chinese hardware -Germany brands hardware 5, Certificate: -SGS/BV/CE/AS 6, production lead time & capacity: - 21 working days/12000 square meters/monthly. 7, the accurate prices will be up to the below details: -window's types -window's designs -order q'ty -hardware/glass and so on. -other request details. >>> About us: - Located in Jimo, Qingdao City, Shandong Province, China. - With 6200 Square Meter factory area, about 120 workshop workers and 30 office workers, with production of 10000 Square Meter per Month. - Manufacture and supply good quality pvc & aluminum, wooden windows /doors, aluminum composite windows and doors. - Main markets: Africa, North America, South America, Mid East, Western Europe, Southeast Asia, Eastern Asia . Why Choose Us ? 1.We have our own factory and own brand "Windoor", best service & best quality is our company life . 2.We have a very powerful & professional team for producing & selling nearly 10 years . 3.We have doing the exporting since we established the company , our customers are around the world, we have rich experience for servicing the customers from the world . 4. We provide the free sample and the shortest lead time . If you have any request details as the above listed, please send to us, then we can design and make the accurate prices for you. Hope to cooperate with you.
White Color Pvc Entrance Glass Door description: 1, Product features: -Factory direct sales -OEM & ODM -Best prices -Anti-aging. 2, Product prices: The accurate prices will be up to the below details: -window's sizes -window''s design -order q'ty -glass, hardware and so on. E. G -600MM X 600MM PVC sliding window single 5mm glass, mosquito net included FOB Qingdao$23.50/sets -600mm x 600mm PVC casement window single 5mm glass, handle, hinges and wind-brace included FOB Qingdao$38.00/pc 2, Profile details: Profile: We can take the profiles such as Conch, Shide, LaoSu, Bailong, Suhuai, etc. Profile types: 80/85mm sery for sliding opening, 60/65/70mm sery for casement/awning/tilt & turn opening. Profile color: The common color is white, it can be any available color. Two colors Co-extrusion, wood printed. Standard Galvanized steel reinforcement. 3, Glasses: Pvc windows can adopt single glass, double or triple insulating glass. The glass can be clear/brown/tempered/low-e. Insualting glass can be filled with argon gas. 4, Hardware: -Highe quality Chinese hardware, such as Chunguang, Guoqiang, Lixing, Ruide, Kinlong. -Germany Roto hardware 5, Certificate: -SGS / BV / Wood export license 6, production lead time & capacity: - 21 working days/12000 square meters/monthly. Why choose Windoor window/door ? 1.Chinese best professional window/door MANUFACTORY We are the best professional factory established in 2005, rich exerpriences for supply window&door and installation service for so many houses/office rooms, villa, school, government building etc. 2.Owned Factory & Brand We have our own factory and own brand "Windoor", best service & best quality is our company life . 3. Professional Here we have special designment /producing/sales team with 15 years experiences. 4. More option - Various kinds of colors and styles caster to modern people's pursuit of practical and fashionable requirements! - Customized design and specification to show your own style! 5.Widen application Can be applied in the sitting room, bathroom, kitchen, office all for residential and commercial area 6. Intimate service Our window/door are easy for installation, we are 24hr on line to supply more intimate service for you 7. Advanced Germany Equipments If you have any request details as the above listed, please send to us, then we can design and make the accurate prices for you. Hope to cooperate with you.
Quick Details Type: Door & Window Screens Place of Origin: Hebei, China (Mainland) Brand Name: Huihuang Model Number: DH-588 Screen Netting Material: Fiberglass Color: black,gray,white,green ,etc brand name: huihuang Material: fiberglass Application: fiberglass +Pvc Size: 18*16,15*17,etc Width: 0.5m-3m length: 30m/roll or 100m/roll or as your request Packaging & Delivery Packaging Details Fiberglass insect screen in roll Packing: one roll in a plastic bag, ten rolls in a weave bag. or four /six rolls in a brown carton box. the stickcode is ok. Delivery time: Usually within 20-25days. According to the client's order quantity. Payment: Pay 30% in advance and pay the balance against the copy of B/L within 5 days. L/C at sight Delivery Time 20-25 days High Quality Fiberglass insect screen for window in roll ( Wire Netting ) Mesh size: 18x16mesh, 18x14mesh, 16x16mesh, 18x18mesh, 20x18mesh, 16x14mesh, 14x14mesh Weigth: 115g/m2, 120g/m2, 125g/m2, 130g/m2, Weaving:Plain weaving, and high temperature-fixing. It is well ventilate for sun shade and easy washing, anticorrosive, resistance to burn, stable shape, long service life and feels straight. Width:0.61m to 2.2m,custom require available at request. Standard length per roll:25m,30m,30.5m,50m,custom require available at request Color: Black, gray, gray,white, green,etc Fiberglass insect screen in roll Packing: one roll in a plastic bag, ten rolls in a weave bag. or four /six rolls in a brown carton box. the stickcode is ok. Delivery time: Usually within 20-25days. According to the clientâ??s order quantity. Payment: Pay 30% in advance and pay the balance against the copy of B/L within 5 days. L/C at sight Feature: 1.The screens with PVC coated fiberglass woven monofilament yarn mad of attractive and safe to use,and good sealing effect. 2.Widel range. 3.Non-toxic and tasteless. 4. With anti-static function, do not stick ash,gas-permeable. 5.Light transmission performance is good,with a true sense of the invisible effect. 6.Gauze selection of glass biber yarn,fire retardant. 7.Auto-filter UV radiation and protect family health. 8.Long life and reasonable design.
1. Efficient heat transfer Gasketed plate-and-frame heat exchangers (GPHEs) provide efficient heat transfer in compact equipment with a small footprint - much smaller and more efficient than shell-and-tube heat exchangers. Plate heat exchangers are designed to optimize heat transfer, because the corrugated plates provide by far the greatest surface area through which the heat can be drawn from one gas or liquid to the other.The units also have a flexible design and are easy to service and maintain. 2. Types of gasketed plate heat exchangers Industrial -extremely versatile range of heat exchangers for use in all types of industries Industrial semi-welded -used in refrigeration when gaskets are not suitable for one of the media and when higher design pressures are needed WideGap -used for applications involving fibrous liquids, highly viscous fluids, and fluids containing coarse particles evaporators-tailor-made, rising film plate surface evaporator condensers -a compact, plate surface vacuum condenser Material available for 0.5 & 0.6mm 304SS, 316SS, Titanium, ASMO254, Hastelloy C-276, Nickel Ni201, 904L More details please contact us directly . 3. Packing&Delivery Package details: standard export plywood case & carton & customizing according to your requirements. Delivery time: within 10 working days after received the deposit and confirmed all details. 4. Our Advantages: a. Competent in suppling various types plate heat exchangers, and also make plate mould according to customer requirements. b. High quality products, best services and competitive prices. c. Large stock: We keep some regular models pares in stock, so fast delivery. d. Technical service: technical consultation, equipment update, capacity expansion scheme, maintenance and cleaning of the equipment. e. ISO9001&ISO14001: 2008 international quality&environment management standard certification f. Strict quality control systems, PHE: pressure testing; plates: size measuring, quality checking; gaskets:thickness/length/width measuring. 5. Applicationï¼? They are widely used in duties for heating, cooling, heat recovery, evaporation and condensation in industries ranging from HVAC, refrigeration, engine cooling, dairy and food to heavier processes like chemical processing, oil production and power generation.
Dm860 type subdivision two-phase hybrid stepper motor drive, with 24 ~ 80v dc power supply, suitable for driving voltage of 24v ~ 80v, current is less than 8.0a diameter 57 ~ 110 mm two-phase hybrid step motor. The current loop driver adopts ac servo drive subdivision control, motor torque fluctuation is small, low speed operation very smooth, almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, cnc machine tools, packaging machinery and other high requirements on the equipment. I. Overview Dm860 type subdivision two-phase hybrid stepper motor drive, with 24 ~ 80v dc power supply, suitable for driving voltage of 24v ~ 80v, current is less than 8.0a diameter 57 ~ 110 mm two-phase hybrid step motor. The current loop driver adopts ac servo drive subdivision control, motor torque fluctuation is small, low speed operation very smooth, almost no vibration and noise. High speed torque is also much higher than other phase drives, high positioning accuracy. Widely used in engraving machine, cnc machine tools, packaging machinery and other high requirements on the equipment. 1 average current control, two phase sinusoidal current drive output 2 dc 24 ~ 80v power supply 3 opto isolated signal input / output 4, overvoltage, undervoltage, over-current, overheating, interphase short-circuit protection 5, fourteen files subdivision and automatic half flow function 6, eight files output phase current setting 7 has an offline signal transmission terminal 8 high starting speed, high speed torque I. Electrical parameters Input voltage Dc 24 ~ 80v input Power dissipation: 80w; internal insurance: 10a Temperature The working temperature is -10 to 45 deg c; the storage temperature is between -40 and 70 deg c No dew, no water Flammable gas and conductive dust are prohibited Weightabout 500 grams
Detailed Product Description Ionizing Air Gun/Anti-Static Gun/Static Elimination Gun is a hand-hold air gun designed to neutralize the static charges and removing dust particles from the surfaces in the industrial applications. Due to high-technologically design ,it is possible to produce more efficient results to solve static electric troubles even in high speed applications. It provides high performance and efficient ionization with fast discharging time. Installation is simple, stable to eliminate static electricity, wind is strong and fast speed, Because the air gun body s plastic is import from JAPAN, Light weight, higher working efficiency, adjustable air quantity. It need be used with ATS power supply together; Ionizing Air Gun/Anti-Static Gun/Static Elimination Gun Working principle: ATS 2000 Series Ionizing Air Gun/anti-static gun/static elimination gun can produce positive and negative charge with a lot of, the high-speed gas compression blow out, can be brought to the charge on the object and fall, when the object surface is negatively charged, it will attract positive ion in the air, when the object surface is positively charged, it will be a negative ion attract in the air flow, so that the static electricity on the surface of the object eliminated, high compressed air can also blown away the stubborn dirt on the object and to neutralize electrostatic. Product features: • Plastic handle, good handle, adjustable wind power • Eliminate static efficiently • Safety induction without electric shock • Good grounding protection • Mainly used in electronics, spray, plastic, medicine, microbiology, electronics and other industries. Ionizing Air Gun/Anti-Static Gun/Static Elimination Gun Specification Model: ATS-2001, ATS-2002, ATS-2003 Input Voltage: 4.6KV,7kv(work with ATS-3003 power supply) Current Consumption: 350 A Current Consumption: 0 -50 Weight: 0.5kg HV cable length : 3meters Operating air pressure : 0.3mpa-0.8mpa Operating air velocity : 10m/l sec Model: ATS-2004 Input Voltage: 5.6KV(work with ATS-3002 power supply) Current Consumption: 350 A Current Consumption: 0 -50 Weight: 0.5kg HV cable length : 3meters Operating air pressure : 0.3mpa-0.8mpa Operating air velocity : 10m/l sec Test Results Testing Conditions RH: 60% ±5 Temperature:22 Testing Conditions : l kv-100v Distance: 150mm Distance Positive: 0.7s Negative: 0.8s Offset Voltage : ±30V
Applications: bus, taxi, metro, highway, supermarkets, gas station, kiosk, store, theater and so on fast payments fields Government, institution, company, factory, school, hospital, hotel Urban public transportation ticket payment system, company shuttle bus ticket payment system, school shuttle bus payment system Features: made of industrial grade material, fully adapt to special circumstances on bus Sealed, dust-proof, waterproof, shockproof and anti-electromagnetic interference Dedicated stable power supply, voltage overload protection With the most advanced Linux system, high-definition LCD display Wi-Fi communication + USB data acquisition, support remote upgrading Contactless smart card, read/write capability, light display for reading card Live voice prompts, supports 15 kinds of voice prompts: such as "student card", "employee card" Supports MIFARE® 1 card, CPU card, supports PBOC3.0 bank standards With Thermal printing module, can connect to POS58 slip printer Optional GPS positioning module, for global positioning satellite positioning Great stability of data storage, data kept as long as 10 years even with power outage Card capacity: 91,880,000pcs Can check the nearest 20 records, to prevent ticket payment dispute Technical specifications: Model: handheld POS machine Linux system for urban bus transportation management Dimensions: 200*151*61.5mm Material: engineering plastics, anti-static electricity coating design, be protected from high-frequency interference Display: 3.5-inch LCD display, 320x240 Operating system: Linux 2.6 system CPU: N32905 processor, ARM9 core @ 240MHz Memory: 32MBytes SDRAM, 128MB NAND flash Data capacity: 259840pcs of detailed data for console storage, unlimited data at GPRS storage Card capacity: 91,880,000pcs Working voltage: DC 8-50V Operating temperatures: -25-65°C Storage temperatures: -40-85°C Humidity range: 0-90% RH non condensing Pilot lamp: red, green light Sound prompt: buzzer, single channel speaker (voice report) RFID: can read and write ISO 1443 type A/B electronic tag (incl. combi-card) Supporting card: MIFARE® 1 card, CPU card, UnionPay IC card Frequency: 13.56MHz Interfaces/connectors: RS232, USB Printer modules: can be connected to slip printer-POS58 Positioning mode: GPS Communication modules: GPRS (900MHz/1800MHz), or CDMA (800MHz) Wi-Fi: supporting 802.11n/b/g standards, 150Mbps, 2.4Ghz UnionPay: compatible for PBOC3.0 UnionPay card MIFARE and MIFARE Classic are trademarks of NXP B.V.
Applications: bus, taxi, metro, highway, supermarkets, gas station, kiosk, store, theater and so on fast payments fields Government, institution, company, factory, school, hospital, hotel Urban public transportation ticket payment system, company shuttle bus ticket payment system, school shuttle bus payment system Features: made of industrial grade material, fully adapt to special circumstances on bus Sealed, dust-proof, waterproof, shockproof and anti-electromagnetic interference Dedicated stable power supply, voltage overload protection With the most advanced Linux system, high-definition LCD display Wi-Fi communication + USB data acquisition, support remote upgrading Contactless smart card, read/write capability, light display for reading card Live voice prompts, supports 15 kinds of voice prompts: such as "student card", "employee card" Supports MIFARE® 1 card, CPU card, supports PBOC3.0 bank standards With Thermal printing module, can connect to POS58 slip printer Optional GPS positioning module, for global positioning satellite positioning Great stability of data storage, data kept as long as 10 years even with power outage Card capacity: 91,880,000pcs Can check the nearest 20 records, to prevent ticket payment dispute Technical specifications: Model: handheld POS machine Linux system for urban bus transportation management Dimensions: 200*151*61.5mm Material: engineering plastics, anti-static electricity coating design, be protected from high-frequency interference Display: 3.5-inch LCD display, 320x240 Operating system: Linux 2.6 system CPU: N32905 processor, ARM9 core @ 240MHz Memory: 32MBytes SDRAM, 128MB NAND flash Data capacity: 259840pcs of detailed data for console storage, unlimited data at GPRS storage Card capacity: 91,880,000pcs Working voltage: DC 8-50V Operating temperatures: -25-65°C Storage temperatures: -40-85°C Humidity range: 0-90% RH non condensing Pilot lamp: red, green light Sound prompt: buzzer, single channel speaker (voice report) RFID: can read and write ISO 1443 type A/B electronic tag (incl. combi-card) Supporting card: MIFARE® 1 card, CPU card, UnionPay IC card Frequency: 13.56MHz Interfaces/connectors: RS232, USB Printer modules: can be connected to slip printer-POS58 Positioning mode: GPS Communication modules: GPRS (900MHz/1800MHz), or CDMA (800MHz) Wi-Fi: supporting 802.11n/b/g standards, 150Mbps, 2.4Ghz UnionPay: compatible for PBOC3.0 UnionPay card MIFARE and MIFARE Classic are trademarks of NXP B.V. http://cardlan.manufacturer.globalsources.com/si/6008848992593/pdtl/IC-card/1150201430/Onboard-Bus-Ticket-Validator.htm
The material inside the rotary dryer has heat exchange with the high temperature flue gas through shell rotating and material lifting by lifter. The rotary dryer has many good characters like: high efficiency, big capacity, high running rate, saving energy, easy for maintenance, long working life. Variety angle of the lifter will increase the heating exchange rate and short drying time. That is widely used for drying lay, slag, fly ash & etc. After the welding of bases for supporting devices of supporting roller and catching roller, vibration aging treatment should be applied for remove the welding stress. Then, use vertical lathe and boring-milling machine for integration fabrication. This process can guarantee the requirement of fabrication precision and dimension & location tolerance. Installation accuracy of rotary kiln is obviously improved. Rotary dryerâ??s advantages as follows: 1. Variety angle of the lifter will increase the heating exchange rate and short drying time. 2. High drying efficiency, big capacity, high running rate 3. Compact structure, operation stable, easy maintenance Rotary dryer is mainly compose of driving device, supporting roller, thrust roller, cylinder, kiln inlet, kiln outlet and sealing device. 1. 2-3 supporting points can guarantee the contacting surface between supporting roller and tyre is paralleled with axis line of cylinder during installation. 2. Supporting device is antifriction bearing (occasionally uses slide bearing). This design has simplified the supporting device of supporting roller, and reduced the useless power loss during operation. It has the features like easy operation and maintenance. 3. Suitable shim between tire and shell will ensure the tire ring on the shell tightly to increase the shell strength. 4. The main driving system uses new type AC variable frequency technology. Compared with electromagnetic speed control and DC speed control, that can save energy, have large range & high precision of speed regulation, high efficiency and running smoothly. Radial direction contacting type sealing device is adopted at kiln inlet and outlet. They are perfect suitable for dimension tolerance of cylinder and skewing movement of cylinder. This sealing deviceâ??s feature is good performance, longer working life and easy for replacement.
BRAKE PAD PPISGFGP38A00730000001 ISG PAC BEARIMG PPISG6202 ISG PACK PLASTIC BLOCK PPISGFG068 ISG PACK FILTER 1550111915 TRAVAGLINI VALVE 8000050801 GEA ACTUATOR 12MM 10MM DSNU-12-10-P-A ACTUATOR 25MM 30MM DSNU-25-30-PPV-A-R3 ACTUATOR 25MM 25MM DSNU-25-25-P-A-S6 REFRIG GAS R449A 99,8% CIL 11,35KG CHAIN LINK 300386A JBT FUSE FR140D69V50T JBT LINING 413.00.0012 JBT FLOW REG VALVE 406-20-0268 JBT CONVEYOR BELT BLW350601 STEIN CHAIN 1127093A JBT SEAL RING 126140A JBT STRIP 10934 JBT BOX 306439A JBT RELAY 310014FCH FMC ELECTROVALVE 303482A FRIGOSCANDIA COMPRESSOR MTZ64HM4C DANFOSS SPRING 1015803X FMC MEMBRANE 0-55516 JBT WASHER 301841A JBT HOLDER 1113393A JBT SEALING RING R1 D11-1 JBT FILTER REGULATOR SCB0001468 SIAT MOTOR S3803443ZZZ SIAT LEFT FORK F-104 S330560393Z SIAT PIN S331071092Z SIAT BELT S330674192Z SIAT PINION S330970292Z SIAT COIL SCB0000680 SIAT TERMINAL SCC0001288 SIAT TERMINAL SCC0001290 SIAT TERMINAL SCC0001289 SIAT CYLINDER SCB0001144 SIAT PNEUMATIC ASSEMBLY SCB0001652 SIAT ROLLER S4304194ZZZ SIAT LIMIT SWITCH S3803172ZZZ SIAT SOLENOID VALVE SBA0001141 SIAT SOLENOID VALVE SBA0001142 SIAT COIL SCC0003342 SIAT SWITCH SCC0003480 SIAT FREQUENCY INVERTER 405544 MAURER REGULATOR 20150 TORFRESMA FITTING TORFRESMA SPROCKET 92781 TORFRESMA PLASTIC BASE 28944 TORFRESMA BOX 9160 TORFRESMA 139064 TORFRESMA CABLE 805310 FORMAX REFLECTOR PMMA/ABS 5304812 SICK SENSOR INST-01637 AES ARABIA PRESSURE MONITOR 071597CA FORMAX PIPE K013300 CFS O-R�°NG 762925010 GEA RELAY MINIAT 24V DPDT LY2N RELAY BASE RELAY SOCKET PTF-08-PU SENSOR 24226-60 DRAKE LEVEL SWITCH INST-01736 AES ARABIA RELAY 105646060 MR MULTIVAC PRESSURE SWITCH 106022182 MR MULTIVAC OPTOCOUPLER 105587431 MR MULTIVAC SENSOR 86311513153 MR MULTIVAC RELAY 105643280 MR MULTIVAC WHEEL 016322T METALQUIMIA BEA SPH RIG SS 6008-2RS VALVE 12002922-02 FOLLET POWER SUPPLY 100-240VAC24VDC HANSEN THERMOSTAT 055316BAW131 FORMAX SENSOR 571213 CFS OVERLOAD RELAY 2,8-4,0A PROGRAMMABLE LOGIC CONTROLLER IMAGO-F300 CNT BLK CTRL BUTTON ZBE102 SCHNEIDER ELE SWICH-BUTTON ZB4BH033 NOTHUM FEED SOU 85-264VCA 24VDC 22W 130X122X63M PROTECTION 005090006 LUTETIA CABLE 7X0,5MM2 6PT+1VD/AM SENSOR M135001 PFM LOAD CELL 2601040205 PFM PLATE S1680440 PFM FUSE 2500000048 PFM REGULATOR 0406001001 PFM BEARING 0701017034 PFM BEARING UNIT S1112031 PFM BUSHING 0816021201 PFM BEARING 07010170151 PFM V BELT NEOPRENE/POL SPZ-1887 1900MM CATCH PLATE 7644953 ULMA SEAL 959000230PRER22 GEA INSERT 456098161 GEA SENSOR PROX 1000171538 GEA O-R�°NG 762925033 GEA SEAL 464198330 GEA O RING 762925069 GEA RING 420407 CFS MAGNETIC SWITCH 5000016708 GEA FREQUENCY INVERTER 400001451 MAREL MTR GKS05-3M HBR 090 C32 MAREL
Product Description High Frequency Welded Stainless Steel Spiral Fin Tube Extruded Wound Finned Tube Aluminum/ Copper Fins Finned Tube Aluminum Fins Heat Exchanger Tube Product Description The spiral fin tube economizer is a newly type heat transfer equipment, consisting of spiral fin tubes to overcome the serious abrasion and short service time.Which consisted of series of spiral finned tubes, the headers of inlet and outlet, bend, frame and other auxiliaries Structure arrangement: in line/staggered arrangement Finned Tube Aluminum Fins Heat Exchanger Tube Features 1. The equipment body can be designed into many modules to ensure the long term and stable running. 2. Compact structure which can enlarge the heat exchanging area in order to add the heat transfer area and less leakage. 3. Improve the heat transfer efficiency. 4. Structure arrangement: In line or staggered arrangement. Finned Tube Aluminum Fins Heat Exchanger Tube Application Aftercoolers, air coolers, air heaters, charge air chillers, condensers, convection heaters, electric heaters, evaporators, fluid coolers, gas coolers, heat pipes, hydrogen coolers, industrial tumble dryers, intercoolers, immersion heaters, oil coolers, radiators, refrigeration, solvent recovery and steam to air heat exchangers. Technical parameters PRODUCT TYPE TUBE MATERIAL FIN MATERIAL TUBE SIZE FIN SIZE Heat Exchanger Finned Tube Extruded Fin Tube All Kind of Material can be applied Aluminum A1100 15.88~50.8 7~11.5FPI Fin Height Max 16mmH L-Foot Fin Tube All Kind of Material can be applied Copper C1100, C1220 12.70~50.8 7~11.5FPI (Wrap On Type) Fin Height Max 16mmH G-Fin Tube (Embedded Type) Aluminum A1100, A1050, A1060 High Frequency Welded Finned Tube A179 Carbon Steel Tube Carbon Steel Tube 12.70~160 1.5~7FPI Stainless Steel Tube Stainless Steel Tube 0.8~3.2mm. Thickness Alloy Steel Material Alloy Steel Material Integral Copper & Copper Alloy High Finned Tube C12200, C11000, C70600 C12200, C11000, C70600 15.88~22.23 5~9FPI Max 12mm. H Oval Finned Tube Carbon Steel Tube Carbon Steel Tube All Size Available 5~15FPI Stainless Steel Tube Stainless Steel Tube Alloy Steel Material Alloy Steel Material Copper & Copper Alloy Tube Copper & Copper Alloy Tube Monometallic Fin Tube Low Fin Tube Carbon Steel, stainless steel, titanium, copper, brass, nickel alloy, etc. -- 9.52~40 12, 16, 19 28 FPI, etc. Turbo-C Tube Turbo-E Tube Corrugated Tube All Kind of Material -- 6.35~40 2~9FPI High Frequency Welded Stainless Steel Spiral Fin Tubes Carbon Steel Spiral Finned Tubes Factory Provided Description of Spiral Finned Tubes: The spiral fin steel pipes currently used are mostly wound, high frequency welded and brazed spiral fin steel pipes. High Frequency Welded Stainless Steel Spiral Fin Tubes Carbon Steel Spiral Finned Tubes Factory Provided
Quick Information Brand Name: NATAI Place of Origin: China Model Number : Natai 02 CAS No. : 70693-62-8 Purity : Compound Powder Molecular Formula : 2KHSO5/KHSO4/K2SO4 Molecular Weight : 614.7 Application : water disinfection Appearance : white powder Chemical : Potassium Monopersulphate Potassium Monopersulfate compound is a kind of acid oxidant, a free flowing white granularly powder, and soluble in water. Other Names are Potassium peroxymonosulfate, potassium monopersulfate compound, Potassium hydrogen sulfate, PMPS,KMPS, ect. Molecular Formula: 2KHSO5/KHSO4/K2SO4 Molecular Weight: 614.7 CAS NO.: 70693-62-8 Packaging: 25Kg/ PP Bag. Reactive oxygen species % 4.5-4.9 Active ingredients(KHSO5)% 42.8-46 Bulk density g/ml 0.8-1.2 Moisture % 0.15 Through the United States screening #20,% 100 Through the United States screening #200,% 8 PH value (25 C) 1% aqueous solution 2.3 PH value (25 C) 3% aqueous solution 2 Solubility(20 C)g/L 256 Stability, % reactive oxygen loss/ month 90%); reaction temperature is too low, energy consumption is large, industrial production must be on the refrigerator can be achieved, and also need to take away from the closed container reaction by-product hydrogen chloride Gas; the reaction of the composite salt mixture obtained after 12 hours centrifugal separation can be obtained, and therefore more difficult to achieve in industrial production. Anodizing method: to use expensive platinum electrolytic cell, equipment investment, high energy consumption; product was paste, difficult to crystallize. Products at room temperature is very unstable, severe loss of reactive oxygen species, low yield. We used sulfuric acid method: sulfuric acid and hydrogen peroxide reaction prepared by a sulfuric acid solution, the solution with the basic potassium compounds were prepared by potassium bisulfate complex salt solution, crystallization, filtration and drying, and then mixed with anti-caking agent, the system get the final product. Application Application industry Disinfection / animal breeding industry Instructions Animal environment disinfection, aquaculture water treatment, can kill almost all the zoonotic diseases of bacteria and viruses, foot and mouth disease, avian flu, SARS and so have an excellent role in the killing. Hospitals, homes, poultry and aquaculture disinfectants and water quality improvers, soil improvement and remediation / agricultural disinfectants, tap water pre-oxidation, disinfection and sewage treatment , swimming pools and SPA water treatment, electronics micro etchants, wood cleaning , Paper industry , food industry , wool shrinkage treatment, cosmetics and daily chemicals. Price Delivery Port : China Packaging & Delivery Packing :25kg paper bag, plastic woven bag Delivery Lead Time : NegotiableSupply Ability : 6000 MT per year
Quick Information Brand Name: NATAI Place of Origin: China Model Number : Natai 02 CAS No. : 70693-62-8 Purity : Compound Powder Molecular Formula : 2KHSO5/KHSO4/K2SO4 Molecular Weight : 614.7 Application : water disinfection Appearance : white powder Chemical : Potassium Monopersulphate Potassium Monopersulfate compound is a kind of acid oxidant, a free flowing white granularly powder, and soluble in water. Other Names are Potassium peroxymonosulfate, potassium monopersulfate compound, Potassium hydrogen sulfate, PMPS,KMPS, ect. Molecular Formula: 2KHSO5/KHSO4/K2SO4 Molecular Weight: 614.7 CAS NO.: 70693-62-8? Packaging: 25Kg/ PP Bag. Reactive oxygen species % �4.5-4.9 Active ingredients(KHSO5)% �42.8-46 Bulk density g/ml 0.8-1.2 Moisture % 0.15 Through the United States screening #20,% 100 Through the United States screening #200,%8 PH value (25 ° C) 1% aqueous solution 2.3 PH value (25 ° C) 3% aqueous solution 2 Solubility(20°C)g/L 256 Stability, % reactive oxygen loss/ month 90%); reaction temperature is too low, energy consumption is large, industrial production must be on the refrigerator can be achieved, and also need to take away from the closed container reaction by-product hydrogen chloride Gas; the reaction of the composite salt mixture obtained after 12 hours centrifugal separation can be obtained, and therefore more difficult to achieve in industrial production. Anodizing method: to use expensive platinum electrolytic cell, equipment investment, high energy consumption; product was paste, difficult to crystallize. Products at room temperature is very unstable, severe loss of reactive oxygen species, low yield. We used sulfuric acid method: sulfuric acid and hydrogen peroxide reaction prepared by a sulfuric acid solution, the solution with the basic potassium compounds were prepared by potassium bisulfate complex salt solution, crystallization, filtration and drying, and then mixed with anti-caking agent, the system get the final product. Application Application industry Disinfection / animal breeding industry Instructions Animal environment disinfection, aquaculture water treatment, can kill almost all the zoonotic diseases of bacteria and viruses, foot and mouth disease, avian flu, SARS and so have an excellent role in the killing. Hospitals, homes, poultry and aquaculture disinfectants and water quality improvers, soil improvement and remediation / agricultural disinfectants, tap water pre-oxidation, disinfection and sewage treatment , swimming pools and SPA water treatment, electronics micro etchants, wood cleaning , Paper industry , food industry , wool shrinkage treatment, cosmetics and daily chemicals. Price Delivery Port : China Packaging & Delivery Packing :25kg paper bag, plastic woven bag Delivery Lead Time : NegotiableSupply Ability : 6000 MT per year
fireproof waterproof fabric Xinxiang Zhuocheng Special Textile Co., Ltd. Is a world class manufacturer of protective fabrics for workwear.The fireproof waterproof fabric is a kind of multifuncitonal fabric which is used for many multi hazard environment like petrochemical,oil gas industry,drilling,mining industry,etc. fireproof waterproof fabric 1. Product introduction of the fireproof waterproof fabric The fireproof waterproof fabric has multi-protection property that it is finishing by THPC or Pyrovatex CP treatment,at the same time the fabric can repel water and oil.It offers overall protection from fire,water,etc. 2.Product parameter (Specification) of the fireproof waterproof fabric Product name fireproof waterproof fabric Material Cotton,CVC or Cotton/Nylon Weight As customers requirement Width 57/58" Structure Twill/Satin/Plain Color Black,navy,red,orange,etc Function Fireproof,waterproof Usage Protective clothing Shrinkage â?¤±3% Color fastness 4-5 grade Abrasion Resistance 4-5 grade Certificate EN11611,EN11612,EN 13034,EN 343 MOQ 3000 meters Service Quick Response,Lab dip,Test Report,Excellent Reception Payment T/T,L/C,Western Union,Paypal Packing plastic roll, inside with plastic bag, outside with woven bag 75m-100m /roll Sample Free sample available 3.Product Feature And Application of the fireproof waterproof fabric High quality Cotton FR Stand Industrial washing above 50 times. High tenacity,durable to use. High color fastness,soft touch,comfortable. THPC,Pyrovatex CP FR treatment. Extreme low content of formaldehyde. Meeting Standards:EN ISO 11611,EN ISO 11612,IEC 61482-1-2. 4. Production details of Drotexs fireproof waterproof fabric 5. Product Qualification of the fireproof waterproof fabric fireproof waterproof fabric can meet EN ISO 11611,EN ISO 11612,EN 14116,EN 13034,EN 1149-3/5. Our fabrics are certificated by ASTM,EN,NFPA,UL,etc and are very popular in European and American Market. 6. Deliver,shipping and Serving of the fireproof waterproof fabric. We promise to finish the production and deliver the cargo on time,track the cargo transition,and tell customer the pick-up time.We are glad to answer customers questions and provide technical guidance free.Also well recommend new products for our customers. 7. FAQ Who should wear Flame Resistant (FR) clothing? People who work in hazardous environments that may involve the following hazards: Electric Arc (electricians, electric utility lineman, etc.), Flash Fire (refinery, chemical and pharmaceutical workers, etc.) Combustible Dust Explosion (workers in the paper and pulp industry, food processing, paint, and many more industries). Plus ANY workers who come in contact with energized electrical equipment.
Product Description 3" FR triple trim across back, around upper arms and leg cuffs Hook and loop adjustable throat latch Left chest radio pocket with utility strap Mic clip above radio pocket Right chest oversized utility pocket Lined and reinforced padded elbows and forearms Hook and loop adjustable cuff closures Heavy duty, two-way Aramid zipper front closure with hook and loop storm flap (Fly area no hook and loop for ease of access) Hook and loop adjustable take-up straps at waist Scissor pocket with straps over semi-bellowed cargo pockets on both thighs Two rear patch pockets with hook and loop flap closures Padded knees and shins 12" leg zipper with hook and loop adjustable straps at ankle Product Type: FR04 Hi Vis Flame Resistant Blue Wear Rough China Coal Mine Sanfor Safety Overall Workwear,Hivis Flame Retardant Mining Workwear Material: 88% Cotton 12% Nylon Fabric Type: 7oz Twill Feature: flame resistant flame retardant Decoration: Coal Mine Mining Color: Navy Size Charts Company Profile Xinxiang Zhuocheng Special Textile Co.,Ltd is a leading manufacturer specialized in developing and manufacturing special protective fabrics.Founded in 1998, Xinxiang Zhuocheng Special Textile Co., Ltd has experienced significant success and growth in the past years. We have been and always will be committed to manufacturing, developing and distributing the best protective fabrics and apparel. DROTEX fabrics have been verified by BTTG, SGS, TUV, ITS,UL,etc, meeting even superior to standards of ENISO11611, EN ISO 11612, EN ISO 14116, EN ISO 61482, EN ISO 20471, NFPA2112, ASTMF1506, NFPA70E, EN1149-1/3/5, EN13034, etc . Now DROTEX has been the appointed brand of renowned clothing manufacturer, oil gas industry, iron and steel companies, Fire Protection Associations and is quite popular in US, Australia, EU and countries in North and South Americas. Xinxiang Zhuocheng Special Textile Co.,Ltd responsibly do business adhering to concept of "Safe, Green, Healthy, Comfortable" and strictly following the rules of OEKO-TEX STANDARDS 100 and REACH. Aiming to provide "Better Protection For Global Wokers", DROTEX will continue to produce high quality products and give best protection for special environment workers. Our Advantages 18 years experience We have been and always will be committed to manufacturing, developing and distributing the best protective fabrics and apparel. Quality guarantee Our quality department will inspect in grey strictly before dying fabric ,after the goods is all finished,our warehouse will inspect the goods and do fabric inspect report ,at last ,our QC will inspect fabric 20% to 30% of total bulk as the third party again.
oil resistant fabric Drotex is a professional manufacturer of all kinds of special fabrics since 1998. We hope to build a long-term business relationship with customers from all over the world in the future. oil resistant fabric 1.Product introduction of the oil resistant fabric The oil resistant fabric has a physical property that is seemingly repelled from a mass of oil.It is usually used in protective clothing industry. It has wide applications,such as oil gas company,roadway safety,chemical industry,etc. 2.Product parameter (Specification) of the oil resistant fabric Product name oil resistant fabric Material Cotton,CVC or T/C(Cotton Polyester Blend) Weight As customers requirement Width 57/58" Structure Twill/Satin/Ripstop Color Black,navy,grey,light blue,etc Function Oil Resistant Usage Protective clothing Shrinkage â?¤±3% Color fastness 4-5 grade Abrasion Resistance 4-5 grade Certificate EN 13034,EN 343 MOQ 1000 meters Service Quick Response,Lab dip,Test Report,Excellent Reception Payment T/T,L/C,Western Union,Paypal Packing plastic roll, inside with plastic bag, outside with woven bag 75m-100m /roll Sample Free sample available 3.Product Feature And Application of the oil resistant fabric If a fabric is labeled as "Oil Resistant",it means that it can repell oil and water.This entails that the product actually has physical properties that,as the label suggests,repels water on contact.Water-repellent products are generally built with special materials and techniques. Using the oil resistant fabric technology, processed on the surface of fabric like the effect of leaf rolling the hydrophobic function, also has oil-proof feature, and by the treated fabric remained the original features, treatment of clothing is more easy to clean. 4. Production details of Drotexs oil resistant fabric 5. Product Qualification of the oil resistant fabric oil resistant fabric can meet AATCC 22,ISO 4920,EN 13034,EN 343. Our fabrics are certificated by ASTM,EN,NFPA,UL,etc and are very popular in European and American Market. 6. Deliver,shipping and Serving of the oil resistant fabric. We promise to finish the production and deliver the cargo on time,track the cargo transition,and tell customer the pick-up time.We are glad to answer customers questions and provide technical guidance free.Also well recommend new products for our customers. 7. FAQ How to measure effect of oil resistance? The first is the RAIN ROOM ENDURANCE TEST. Put the fabric in the room where different climatic conditions are reproduced. The second is the STATIC COLUMN WATER RESISTANCE TEST. A column of water is placed on the top of the fabric and the level at which the water begins to seep through is recorded.
