Application scope of enersine mni slc Municipal street lighting saving and protection, suitable for multi-types of lamps with capacitors and electronic energy saving lamps etc Dock/port lighting, container yard lighting, logistics center lighting, station/stop lighting, gas station lighting etc Freeway lighting and tunnel lighting Square/plaza and airport lighting Underground garage 24h-self-adaption lighting Large-size billboard lighting Secure lamp and equipment No contact Precise and continuous regulation Pure sine input current Pure sine output voltage Perfect non-harmonics Non-current/non-voltage cutting off when regulation Break-through technology leading in the world The most advanced power electronic technology Protection technology against lightening induction Initiated high frequency ac voltage stabilization and regulation technology Epoch-making of ac voltage stabilization history Small volume and small weight Secured and reliable circuit structure High efficiency Environment protection and sustainable development Green energy saving and sustainable development support Human-oriented, on-demand regulation Human-oriented energy saving Situational energy saving, Protect lighting device without any affect on illumination Unconditional lighting guarantee Knowing deeply the responsibility to guarantee normal lighting, enersine initiates and leads the unconditional lighting guarantee ilo (insure light on) in the world Lumen regulation and energy saving at one's pleasure High security and reliability Mni slc has no mechanical contact; it is much safer and more reliable than electromagnetic mechanical products; it will damage the lamps when electromagnetic products switching between different energy saving level and contacts, and transformer will be burnt up. Highest energy saving rate Mni slc gives highest energy saving rate out of all energy saving products in the world market, which can reduce the voltage of lamp from input voltage value to 0 continuously and smoothly. Its energy saving rate can be increased infinitely but without relation with manufacture cost. However, electromagnetic product cost has direct proportion to the power of voltage reduction compensation. So, usually, the voltage reduction by electromagnetic regulator is limited so as to keep the low manufacture cost. Automatic voltage tracking for each phase Mni slc can track and adjust the voltage of each phase according to the set value that is equivalent to 3-phase-independent control. Suitable for all kinds of lighting device Especially for metal halide lamp, sodium lamp and other hid lamps. Mni-PC3x50 N/W333x50A51 110x64x39 Mni-PC3x60 N/W39.63x60A51 110x64x39 Mni-PS3x80 N/W52.83x80A82 138x72x45 Mni-PS3x100N/W663x100A82 138x72x45
Plain steel perforated metal mesh
Galvanized steel perforated metal mesh
Turbine control system Process control solution and process automation solution based on distributed control system ( dcs ). Power plant i.E. Boiler control system and turbine control system is also available from us.
Residue led chip No requirement
Model : fr1305 Usb plug-and-play. No driver required. System: windows98/2000/me/xp linux & mac os Radio frequency technology/433. 92hz /315hz Control distance: up to 25m Working voltage: 3v Sleep current: 1ua Wavelength: 650nm Max output < 1mw or < 5mw Battery: aaa x 2 Product meas: 12.5cm *2.8cm*1.3cm Main function 1. Laser pointer function; 2. Page up function 3. Down function Packed in gift box : net wight 53g Gross weight 171g
Laser crystal Mainly designing, producing and selling all kinds of k9 class a excellence blank crystal, 2d/3d laser crystal, crystal colour image, crystal keychains, ashtrays, crystal trophy, crystal ornaments, crystal figurine, crystal clock, crystal cup, perfume bottles, crystal led rotary light base, various kinds of gifts and decorations and glassware gift and so on. we can ensure that our crystal high quality with good gift box , the competitive price and our best service. We are oem supplier. We have our own crystal factory and have our own export and import rights. Different designs are avaliable according to customers requirements, and our products are well-received by our customers and collectors home and abroad. Our aim is to strive for an expert of middle & superior crafts, and be able to become oem producer globally Good gift box package
Grinder Description: Grinder with hand operator Cast rion with beautifully painting Color box packing and outer carton Qty/ctn(pcs) 6 G.W/n.Wkg 28/27 Measmt(cbm): 50* 30*24 0.036 Size of colour box(cm): l16 x w14 x h23 20ft: 4833pcs 40ft: 8000pcs Quotation: fob shanghai, usd 4.65/pc M.O.Q: 2000pcs Qty/ctn(pcs) 6 G.W/n.Wkg 28/27 Measmt(cbm): 50* 30*24 0.036 Size of colour box(cm): l16 x w14 x h23
Characters Insert the charger connection plug of loope into the charge port of the machine. Pull up the horizontal handle. Rotate the handle with the speed of 130 turns/min. -˜ soon, the light of charge will be on immediately. -+ During the short time of starting, though the handle is rotated lightly, but when reaches to certain speed, it will become heavy, then start to charge. -ÿnotice proceeding and warning·ª -+ The above fªnotice proceeding of usefª is significant, please read and comply with the provisions. -+ This product is used for easy mobile phone. -˜though the product can be used for multi-phones, but we admit that it is not applied for all mobile phones. Prohibit to discharge and refit the product. Our company will not responsible for the appeal relevant to refitted prodcut. -˜ this product is not leakage-proof or waterproof, so do not use the machine in the place with water or operate the machine with damp water, or it will result in damage or failure. -˜ prohibit to elongate the handle charge connection line, it is the reason of damage for productand charge connection line. Color box, blister card
Dynamo LED flashlight Color Box,Blister packing
Dt-330 dynamo led torch Portable type 100f- 55f- 32 mm Convenience once owned it -n Please read this instruction before using Characters·+ It does not need dry battery for it is handle generate electricity. For it has luminate diode·+so it is suitalb for urgent illuminat at night. Can do preparation charge for mobile phone. -¦ Is a kind of small articles with convenient schlep and storage. Use caution: If this product striked seriously will result in inner confusion and cause useless. In the course of using, the speed to rotate the handle should be best at 130 turn/minute; if rotate exceeds the above speed randomly will damage the inner generate. Please note Please rotate the handle clockwisely, (there is arrow for appointed direction). Specification parametrer Dimension 100f-55f-32 mm Weight of main frame 110g Light White flash diode Output pressure Max 8v Output current Max 400 ma Talk trial after charge·+3 minute·+about 300 turns·¼ the talk is about·ª2min Rest state·ªabout 25 min -+ the use time will be different for the different machine tupe. When the diode is on (3 light on)·+1 min charge time can support 20 light. -+ But the light of diode will be darken with the past of time.
Dynamo led flashlight Specification parametrer Dimension 100f-55f-32 mm Weight of main frame 110g Light White flash diode Output pressure Max 8V Output current Max 400 mA
Capacitor Internation standard, also can as your special requirments.
Hot water boiler Wns series of horizontal internal combustion boiler is the boiler hull type horizontal tri-backhauling internal combustion boiler designed by our technical professionals according to the advanced technology home and abroad, combined with practical experience. The boiler is fully automatic, the fuel after atomization by the burner forms the flame filling the whole waveform furnace, and via furnace wall to transfer the radiant heat, this is the first backhauling. The high temperature smog yields from combustion is concentrated in back combustion chamber and turns to the second backhauling, such as whorl flue pipe bundle area; after heat exchange by convection, the smog temperature gradually lowers and goes into the front smog chest, and then turns to the third backhauling, for example, bare pipe bundle area, and then passes through rear smog chest to chimney, and finally exhausts to the atmosphere. This series of steam boilers can greatly promote the boiler's efficiency, save fuel and lower the operation cost, so as to reach the aim of high performance, gas saving and safety of the boiler. The said products passed the pyrological test from shanghai industrial boiler's research institute and the environment protection test from shanghai dust equipment inspection center under national environment protection bureau, that every performance target reaches the design requirement and totally in line with the national standard, and also passed the specialists' certification from jiangsu province machinery industry bureau. The product is unanimously believed to hit the advanced level home and abroad
Tjyag-505b Main function: engraving the everlasting 2d and 3d images inside the crystal or glass. Advantage: with big engraving range and it can engrave both big and small crystal blocks. Characteristic: it can be made with one or two or three laser heads. Others: it is a mature products with high steady capability. Technic specificatioin Item parameter Laser medium nd: yag Laser wavelength 532nm Highest frequency 200hz Maximum engraving range 280mmf-280mmf-90mm Engraving speed 6000-10000dots/min Power of the whole machine 4 kw Working current of the whole machine 20a Continuous working time 12hrs Laser head number 1 or 2 or 3 Weight of the whole machine 230kgs Weight of the whole machine 230kgs Packing:ply wood per unit
Lingqiang test sim card The international standard 7816
Integral ballasted cfl
Fluorescent fixtures
Tjdp-523k laser subsurface engraving machine Main function: engraving everlasting 2d and 3d images inside the crystal. Advantage: it adopts the advanced galvanometer scanner technology together with the 3khz diode-pumped laser to greatly increase the engraving speed. It can finish engraving a crystal in only 1 minute. Characteristic: it adopts all-in-one structure to greatly save the operation space. Others: small dimensions, low power consumption, high laser quality, high efficiency , easy maintenance, etc. Technic specification item parameter Laser frequency 3000hz Maximum engraving speed 120000 to 180000dots/min Maximum power of the whole machine 1kw Number of laser heads 1 Water medium deionized water or pure water Spare part none Laser medium diode-pumped nd: yag Laser wavelength 532nm Cooling medium r134a Continuous working time 12 hrs Weight of the whole machine 170kgs Dimension of the whole machine 570mm-650mm-1220mm Maximum engraving range 60mm-85mm Ply wood per unit
Tjyag-522 Main function: engraving everlasting 2d and 3d images inside the crystal. Advantage: it adopts the advanced galvanometer scanner technology to increase the engraving speed. Characteristic: it adopts all-in-one structure to greatly save the operation space. Technic specificatio Item parameter Laser medium nd: yag Laser wavelength 532nm Laser frequency 200hz Maximum engraving range 60mm-85mm Maximum engraving speed 8000 to 12000dots/min Continuous working time 12hrs Maximum power of the whole machine 4 kw Number of laser heads 1 Weight of the whole machine 350 kg Dimension of the whole machine 700mm-760mm-1530mm Water medium deionized water or pure water Cooling medium r407c Dimension of the whole machine :700mm-760mm-1530mm Weight of the whole machine 350 kg Packing:ply wood per unit
