Battery Type: Lithium Polymer Battery Battery Brand: VCELL/OEM Model: VP401230 Nominal Voltage: 3.7V Nominal Capacity: 120mAh Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 1.5C Peak discharge current: 5C(700 Wire/Connector: TBD
Battery Brand: VCELL/OEM Battery Type: Lithium Polymer Battery Model: VP652030 Nominal Voltage: 3.7V Nominal Capacity: 350mAh Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 1.5C Peak discharge current: 5C(700 Wire/Connector: TBD
Battery Brand: VCELL/OEM Battery Type: Lithium Ion Battery(NCM) Model: ICR14650-1100 Nominal Voltage: 3.7V Nominal Capacity: 1100mAh Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 3.0C Peak discharge current: 5C(700
Battery Type: LiFePo4 Battery Brand: VCELL/OEM Model: IFR32700 Nominal Voltage: 3.2V Nominal Capacity: 6000mAh Charge Cut-off Voltage: 3.65V Discharge Cut-Off Voltage: 2.0V Max Continuous Discharge Current: 3C Max Plus Discharge Current: 5C Weight: Approx 185g Size: Max 32.5*70.8mm
Battery Brand: VCELL/OEM Battery Type: Lifepo4 Battery Model: IFR32650 Nominal Voltage: 3.2V Nominal Capacity: 5000mAh Charge Cut-Off Voltage: 3.65V Discharge Cut-Off Voltage: 2.0V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 3.0C Peak discharge current: 5C(2500
Battery Type: NI-MH Battery Battery Brand: VCELL/OEM Model: D-6000 Nominal Voltage: 1.2V Nominal Capacity: 6000mAh Charge Cut-Off Voltage: 1.5V Discharge Cut-Off Voltage: 1.0V Standard Charge: 0.2C Fast charge current: 0.5C Maximum Continuous Discharge Current:3.0C Peak Discharge Current: 5.0C( 500 Application: emergency lighting, portable devices, power tools,etc
Battery Brand: VCELL/OEM Battery Type: Li-Ion Battery Model: VP36-4400 Nominal Voltage: 36V Nominal Capacity: 4.4Ah Cell Combination: 10S2P Charge Cut-Off Voltage: 42V Discharge Cut-Off Voltage: 27.5V Charge Current: 2A Continuous Discharge Current: 20A Size: 135*75*60mm Weight: Approx 970g Cycle life: 800 cycles @80%DOD
Hardwood including cherrywood, beech and maple in 16" cut. They are mechanically treated and kiln dried naturally to achieve a moisture content of approximately 30%. It is a clean and hassle free product that is ready to use, easy and quick to light, perfect for stoves and indoor or outdoor fireplaces. They are corded on a non-returnable pallet. 42 cu. ft. Cut firewood into 16 inches logs, already stacked on a pallet 100% Hardwood so long fire duration
Battery Brand: VCELL/OEM Battery Type: Lithium Polymer Battery Model: VP802530 Nominal Voltage: 3.7V Nominal Capacity: 520mAh Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 1.5C Peak discharge current: 5C(700 Wire/Connector: TBD
Battery Brand: VCELL/OEM Battery Type: Lithium Polymer Battery Model: VP103450 Nominal Voltage: 3.7V Nominal Capacity: 2000mAh Certification:UN38.3/MSDS Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 1.5C Peak discharge current: 5C(700 Wire/Connector: TBD
Battery Brand: VCELL/OEM Battery Type: Lithium Ion Battery(NCM) Model: 18650-2000 Nominal Voltage: 3.7V Nominal Capacity: 2000mAh Charge Cut-Off Voltage: 4.2V Discharge Cut-Off Voltage: 2.75V Standard charge current: 0.2C Max charge current: 1.0C Standard discharge current: 0.2C Max continuous discharge current: 3.0C Peak discharge current: 5C(700 Large capacity, rechargeable, long endurance, High compatibility, excellent cost performance, pollution-free
Main Technical Parameters Diameter of Blade: 350mm- 600mm Size of worktable: 3200mm 2000mm Maximum distance of horizon cutting: 3200mm Maximum travel of the cutter lifting: 300mm Cutting Thickness: 0-180mm Tilt Angle of Worktable: 0-83 Power of Main Motor: 15kw Overall Dimensions: 5800mm(L) 5000mm(W) 3000mm(H) Three phase voltage: 380V,50HZ Total Power: 20kw Total Weight: 6t
The tuning fork crystal oscillator 32.768 khz 12.5pF features: 1 Description: Tuning Fork Quartz Crystal 2ã??Nominal Frequency: 32.768KHz 3ã??Oscillation Mode: Fundamental 4ã??Cutting Mode: x +2�° cut 5ã??Measurement Instrument: S&A 250B(Calculated FL) Tuning fork crystal oscillator Electrical Characteristics: Operation Conditions:3*8 mm 32.768khz watch crystal , cylinder type
Shredding is the first process to deal with plastic waste. GREENMAX Rhea Plastic Shredder is a cutting technique that works with all types of plastic waste, including cutting the waste into small pieces. Rigid plastics such as HDPE waste (used milk bottles, chemical bottles, etc.), PP waste (PP bottles, PP containers, PP panels, etc.), ABS waste, HIPS waste, etc.
Features for the Honda HRC216HDA The Honda HRC216HDA self-propelled commercial lawn mower features a hydrostatic cruise control system for precision speed control between 2.1 and 4 mph. A shaft drive (no belts) transfers power from the engine to the transmission to make it maintenance free. The HRC216HDA has a Honda GXV160 commercial grade 4 stroke engine that is CARB compliant and meets all 50 US state EPA emissions standards. Engine Engine Brand Honda Displacement(cc) 163cc Power 4.3 HP Fuel Capacity 1.4 liters Oil Capacity 0.65 L Starting System Recoil Engine GXV160 Cutting Deck Cutting Width 21'' Cutting Deck Material Steel - 16 ga Cutting Height (min-max) 3/4'' - 4'' Cutting Height Steps 8 Blades Twin blades (MicroCut System) Drive System Transmission Type Cruise Control (Hydrostatic) Speed Forward (min, max) 2.1 to 4.0 mph Equipment Ball Bearing Wheels All Handle 1'' Steel Tube
Cutting Width (in.) 42 inches Horsepower (HP) 19.5 hp Mower Size Small Number of Cylinders Single Cylinder Power Type Gas Size of Yard 1 - 2 Acres Engine Make Kohler Engine Riding Mower Features Adjustable Cutting Height Assembly Required Yes CA (CARB) Compliant Not CARB Compliant Commercial / Residential Residential Cutting Options Side-Discharge Deck Material 12 Gauge Steel Deck Type Stamped Drive Type Rear-wheel Drive Engine Displacement (cc) 541 Fuel Tank Capacity (gallons) 3 gal Included with Riding Mowers Battery(s),Engine Oil Lawn Mower Type Front Motor Riding Maximum Cutting Height (in.) 4 Maximum Forward Speed (mph) 5.5 Maximum Reverse Speed (mph) 2.5 Minimum Cutting Height (in.) 1.5 Number of Deck Wheels 2 Oil Capacity (oz.) 64 Recommended Oil Type 10W-30 Refurbished No Start Type Electric Terrain Type Flat with Obstacles,Hilly Transmission Type Hydrostatic Certifications and Listings No Certifications or Listings Assembled Depth (in.) 67 in Assembled Height (in.) 43 in Assembled Width (in.) 52 in Front Wheel Size (in.) 15 Mower Deck Width (in.) 42 Rear Wheel Size (in.) 20 Turning Radius (in.) 16
A full range of push type fastener kits, available in 12 popular sizes, suitable for replacing door decorations, radiator guard yokes, mudguards, bumpers, and mudguard fasteners in models such as Ford, General Motors, Chrysler, Toyota, and Honda. Save time and money - you can find all kinds of car push fastener kits here, without having to go to a car parts store to find different fasteners. You can use the free fastener remover to remove old clips. High quality - Made of high-quality materials, heavy-duty structure, and durable, this push type fastener will not easily break or crack during use. The most common size - don't worry about losing or damaging body fasteners. All necessary retainers for accurate replacement of old and damaged retainers. � Specifications Technical Details Manufacturer:HanYang Part Number:HY-RIV002 Size:R2040~R6060 Color:White/black Packing & Delivery:Tray+Carton Company Profile: Our company is a professional manufacturer of Fasteners, Hardware products, Hardware Tools, Metal Products, Machinery and equipment. Since its inception, the company has been constantly innovating and breaking through, with stable product quality, continuous improvement of technology, and improvement of production efficiency to enhance the core competitiveness of the company. High-end technical talents have continuously developed a series of new production processes to make their technologies more mature and stable. The success and brilliance of an enterprise depends on the recognition, support and trust of our customers. Our company will continue to innovate, forge ahead, and follow the pace of the market, and continue to design and manufacture more high-quality and practical products for new and old customers. FAQ: 1. who are we? We are based in Yunnan, China, start from 2022,sell to Oceania(12.00%),Southeast Asia(12.00%),South America(12.00%),Southern Europe(12.00%),Eastern Asia(12.00%),North America(12.00%),Africa(5.00%),Northern Europe(5.00%),Western Europe(5.00%),Domestic Market(5.00%),Eastern Europe(3.00%),Central America(2.00%),Mid East(2.00%),South Asia(1.00%). There are total about 11-50 people in our office. 2. how can we guarantee quality? Always a pre-production sample before mass production; Always final Inspection before shipment; 3.what can you buy from us? Fasteners,Hardware products,Hardware Tools,Metal Products,Machinery and equipment 4. why should you buy from us not from other suppliers? Since its inception, the company has been constantly innovating and breaking through, with stable product quality, continuous improvement of technology, and improvement of production efficiency to enhance the core competitiveness of the company. 5. what services can we provide? Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery; Accepted Payment Currency:USD,CNY; Accepted Payment Type: T/T; Language Spoken:English,Chinese
Frozen and fresh veal, beef and young bull cuts, forequarters and hindquarters, tenderloin, prime rib, brisket, flank, shin & shank, knuckle, topside, silverside, rumpsteak, head meat trimming, eyeround, chuck & blade, chuck tender, ribeye steak, heel, ossobuco, by products like tripe, testicles, tail, feet, omasum, lungs, aorta, tongue, diaphragm, liver, tendons, mask, snout, rumpsteak, filet mignon, ribeye steak, top sirloin steak, stripling steak, fresh and frozen lamb, mutton and goat meat, whole carcasses, six way cuts, boneless or bone in shoulder, chops, rack, shank, neck, loin chop, rump, by products like tripe, intestine, fat, kidney, liver, heart, testicles, tongue, trimmings, head trimming.
PCD/PCBN milling cutters features: The cutting edge adopts laser technology, the cutting edge is sharp, and the cutting is light and suitable for high-speed occasions. PCD of medium grain size has both abrasion resistance and chipping resistance, and excellent overall performance. Diameters of the same specification, different cutting edge lengths. The cutting edge over-center design can be used for axial feed milling similar to drilling. Optimize the groove shape to achieve a higher dynamic balance level. The small R angle and chamfering of the cutting edge effectively increase the durability of the tool. Applications of PCD end mill, cbn end milling, mill for gearbox bottom: Application industry: 3C, automotive, aerospace, etc. Application materials: non-ferrous metals such as aluminum, magnesium, titanium, silicon; fiber materials, insulating materials, plastics, composite materials, etc. Advantages of PCD end mill, cbn end milling, mill for gearbox bottom: Performance advantages of PCD/PCBN milling cutters With ultra-high hardness and super wear resistance; Stable performance and long tool life; High processing efficiency and low cost; High surface finish can be obtained; High conductivity, good toughness. Forming slot milling cutters have been successfully used in slot milling. Multiple slots can be formed and milled at one time, which reduces the use of tools and the number of tool changes, and greatly improves the processing efficiency. The water outlet design in the tool center can effectively reduce the processing heat in the cutting area, reduce tool wear and make the tool have a longer processing life. Pack: Cartons and bubble wrap Delivery Time: Seven to ten days Sample: No free samples are provided FOB Port: Shanghai Qingdao Guangzhou
90 Rotating Handle Push a button to make vertical trimming quick, easy, and comfortable. 24" Bar and 3/4" Cut Capacity Sturdy, thick, and robust to tackle big jobs in less time. Exclusive Blade Design Provides a cleaner, more efficient cut. All-Season Power More products in the Flex-Force Power System�®, from mowers to string trimmers to snow blowers. Specifications Battery Power L135 battery (60-Volt MAX, 2.5 Amp-Hour, 135 Watt-hour) - 60-minute charge time. Cutting Bar Length 24" (60.96 cm) Rotating Handle Standard. Charger Toro Flex-Force Power System 60V* Battery Charger. Handle Design Rotating Handle. Weight 9.2 lbs. (4.2 kg) with battery / 7.0 lbs. (3.2 kg) without battery.
