Model V158TIL Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 680(500)/2,300 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 10.89 Compression ratio 14.6 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 130 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,435
Model V158TIM Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 540(397)/2,100 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 9.94 Compression ratio 15 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 100 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,350
Model V158TIH Engine type 4 cycle, V type, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 480(353)/1,800 Displacement( cc ) 14,618 Cylinder number - bore x stroke( mm ) 8 - 128x 142 Mean piston speed (m/sec. ) 8.52 Compression ratio 15 : 1 Firing order 1 â?? 5 â?? 7 â?? 2 â?? 6 â?? 3 â?? 4 â?? 8 Governor type of injection pump Mechanical variable speed (R.Q.V) Fuel consumption lit / h 85 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.6 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 200 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 89 / 78 Fresh water pump type Centrifugal type, driven by belt Sea water pump type Bronze impeller type driven by belt Direction of revolution Crankshaft Counter clockwise viewed from stern side Engine size (L x W x H) (mm) 1,657 x 1,226 x 1,397 Engine dry weight (KG) 1,350
Oil and gas industry: Accelerating the process and improving the efficiency of well drilling; increasing the life of drilling equipment; drilling fluids and plug cements of low density and high strength. Construction: ultralight and ultra-lightweight concrete; high-strength and low-density thermal and acoustic insulation boards; increased adhesion of concrete or brick walls, excellent leveler. dry mortars, lime and liquid mortars, cements, plaster, insulating roof coatings and soundproofing materials - lightweight, smooth surface, low cost, heat resistant, shrinkage resistant. sensitizer for the use of emulsion BBs. paints - resistance to chemical corrosion and light, thermal insulation, smoothness. Styrofoam: Aircraft, spacecraft, ship construction - low density and moisture absorption, high mechanical properties of materials for vibration damping, insulation and thermal protection. Ceramics: Refractory materials and coatings, insulation materials. Plastics Epoxy resins: production of polyethylene - improving strength and abrasion resistance. production of bearings, cameras, furniture and its accessories - tensile strength, impact strength, hardness, resistance to heat and light. Profiled materials, pipes, plates - dimensional stability, rigidity, heat resistance; TV housings, auto parts - compressive strength, bending elasticity, shrinkage reduction.
What Is The Art Paper: Coated paper is also known as coated art printing paper. It is a copperplate base paper coated with white paint made of advanced printing paper. Coated paper is a kind of coating processing paper for copperplate printing. The paper is uniform and compact, with high brightness (over 85%) smooth paper surface, high gloss, good dimensional stability, high tensile strength and surface strength. Due to the coated surface is covered by coating layer, and super calender, so the compression performance of coated paper is poorer, low absorbency,should be paid attention to in the production of printing ink supply and printing pressure control, and focus on the reference of the coated paper roughness index, general high gloss of coated paper roughness in 0.8 mu m lower roughness value, said the paper surface is flat and level. There are single-sided coated paper, double-sided coated paper, matte coated paper, embossed coated paper. Low-quantity coated paper is mostly web paper, 787mm or 889mm in width, there are also flat paper, mainly used for printing journals. High quantity coated paper is flat paper, the size of 787mmx1092mm, 889mmx1194mm,635mmx 965mm, 880mmx1230mm, mainly used for printing cover and album.Coated paper is divided into weight coating (each side coating amount 20g/ã?¡) and medium coating (
Rock Wool Board Rose wool board uses high-quality basalt as raw material whose melting point is above 1000 �ºC and has good effects on heat insulation and sound absorption. It has good properties of fire resistance, pest proof, corrosion resistance, stable chemical property and free-asbestos and safe to human bodies. Small coefficient of heat conductivity and good capability of heating preservation. Outstanding effect of energy-saving. Excellent fireproof capability. Excellent sound absorption and sound insulation capability. Green thermal insulation materials and no harm for body. Waterproof. The folded rock wool board with certain compression resistance has greater drawing strength, and it does not tend to peel off and has excellent improved durability. Rose wool insulation materials are widely used in construction wall, roof, industrial furnace, oven, heat-treating equipment, storage tank, storage groove, power house, flue, petrifaction and oil refining equipment and all kinds of keeping-warm and heat insulation pipelines.
Ceramic Fiber Rope Ceramic fiber textile includes ceramic fiber cloth, strap, twisted rope, round braided rope and square braided rope. All are made from our high quality ceramic fiber material. They can be used for high temperature applications up to 2300°F. The rope is reinforced with fiberglass filament, and optional Inconel/alloy steel wire. Ceramic fiber textiles (cloth, tape and rope) contain a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property. ROSEWOOL ceramic fiber rope is a woven fabric made from high quality ceramic fiber woven yarn .Ceramic Fiber Rope can can add glass fiber and stainless steel wire reinforcement according to different work temperature and work conditions. Good compression strength Non-toxicity, environmental protection Low thermal conductivity and low thermal capacity Good antacid oil resistance and water vapor resistance Common applications: door seals or caulking for ovens, furnaces and boilers, expansion joints, cable or pipe wrapping, high temperature seals or gaskets. widely used in welding, foundry works, aluminum and steel mills, boiler insulation and seal, exhaust systems, shipyards, refineries, power plants and chemical plants.
Everflon Fluoropolymer PFA Resin Everflon PFA is a perfluoroalkoxy copolymer resin available in pellet or powder. Everflon PFA combines the processing ease of conventional thermoplastic resins with the excellent properties of Everflon polytetrafluoroethylene (PTFE). Products manufactured from Everflon PFA can offer continuous service temperatures up to 260°C (500°F). What's more, Everflon PFA provides superior creep resistance at high temperatures, excellent low-temperature toughness, and exceptional flame resistance. Application Wire insulation, fittings, tubing, filtration housings, wafer carriers, pump housings, valve bodies, heat exchangers and other end use components requiring a high performance fluoroplastic material. Processing Everflon PFA can be processed by conventional melt extrusion, and by injection, compression, transfer, and blow molding processes. High melt strength and heat stability permit the use of relatively large die openings and high temperature draw-down techniques that increase production rates. Reciprocating screw injection molding machines are preferred. Corrosion-resistant metals should be used in contact with molten fluoroplastic resin. Extruder barrel should be long, relative to diameter, to provide residence time for heating the resin to approximately 390 °C (730 °F). For more detailed processing information, including recommend
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter �?31-�?32 Chamfering Size 1�?45�°, 2.5�?45�° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter 31-?32 Chamfering Size 145°, 2.5 45° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
LG-900 Hydraulic Rail Tensor This machine can not only be used for repairing the broken rails of the seamless track, but also can be used for the stress relief of the seamless track and the adjustment of the track seam in sections of the ordinary track, and is suitable for various rail types. The use of this product can change the traditional method of repairing broken rails, that is, adopting rewelding without inserting short rails, which saves time and effort, expands the operating rail temperature range, and prevents the actual lock rail temperature from changing. Specification Model LG-900 Type Hydraulic Rail Tensor Material Aluminium Dimensions (L x W x H) (mm) 1450*780*650 mm Working Pressure 67 MPa Max. tensile force 900 kN Max. compressive force 200 kN Cylinder stroke 500 mm Power supply Petrol engine or electric motor Locking form Wedge iron lock Weight 380 kg
LG-900 Hydraulic Rail Tensor This machine can not only be used for repairing the broken rails of the seamless track, but also can be used for the stress relief of the seamless track and the adjustment of the track seam in sections of the ordinary track, and is suitable for various rail types. The use of this product can change the traditional method of repairing broken rails, that is, adopting rewelding without inserting short rails, which saves time and effort, expands the operating rail temperature range, and prevents the actual lock rail temperature from changing. Specification Model LG-900 Type Hydraulic Rail Tensor Material Aluminium Dimensions (L x W x H) 1450*780*650 mm Working Pressure 67 MPa Max. tensile force 900 kN Max. compressive force 200 kN Cylinder stroke 500 mm Power supply Petrol engine or electric motor Locking form Wedge iron lock Weight 380 kg
Raw Material Specifications: Raw Material Coir Fibre Pith (coconut coir/ coco peat/coir fibre dust) Sieving 1/4 Inch. Drying Sun drying and sterilization Moisture content 18% below pH 5.5 to 6.8 Electrical Conductivity 600 Micro S/Cm. Maximum Product Specifications: Weight 650grms. +/- 50 grams Size 20 x10 x 5.5 cm +/- 0.5cm. Compression Ratio 8: 1 After Expansion Wet Volume 8 - 9 liters. Wrapping Individually wrapped or naked Packing 1) 2200 nos. Bricks stacked in a pallet after stretch wrapped poly strapped. 2) Cartonized and palletized 72 boxes per pallet 24 pcs per box Loading Capacity in a 40 ft HC container A) Pallet - 1) 20 nos Pallet = 26.0 MT 2) 20 nos Pallet = 22.4 MT (34560 Briquettes) 20 ft Container B) Pallet - 1) 10 nos Pallet = 13.0 MT.(2000 briquettes per pallet) 2) 10 Pallets = 17280 briquettes (24 nos x 72 boxes per pallet) ** Can be customized to customer requirement.
Engine Number/Position of Cylinders: Single Cylinder Engine Capacity: 155cc Bore x Stroke: 58.0 mm x 58.7 mm Compression Ratio: 11.6 : 1 Maximum Power: 11.3 kW / 8000 rpm Maximum Torque: 13.9Nm / 6500rpm Starter System: Electric Starter Lubrication System: Wet Engine Oil Capacity: Total â?? 1.00 L ; Regular 0.90 L Fuel System: FI (Fuel Injection) Clutch Type: Dry, Centrifugal Automatic Transmission Type: V-belt Automatic Engine Type: Liquid cooled 4-stroke, SOHC FRAME Front Brake: Disc Rear Tire: 140/70-14M/C 62P Rear Brake: Drum Frame Type: Underbone Front Suspension: Telescopic Rear Suspension: Unit Swing Front Tire: 110/80-14M/C 53P DIMENSION Length x Width x Height: 1980mm x 700mm x 1150mm Wheelbase: 1350mm Ground Clearance: 143mm Seat Height: 790mm Curb Weight: 125 kg (ABS Version), 122 kg (Standard Version) Fuel Tank Capacity: 5.5 liters ELECTRICITY Ignition System: TCI Battery: YTZ7V (ABS Version), NTZ6V (Standard Version) Spark Plug Type: NGK/CPR8EA-9
Product Description AG35 is an ultra-thin aerogel felt based on Preoxidized filament fiber felt. Despite its thin thickness, it possesses an exceptionally low thermal conductivity. It is particularly suitable for insulation and fire protection in applications such as power batteries, automobiles, firefighting suits, or small spaces with insulation requirements. Typical Applications: Fire insulation for power batteries Thermal insulation for vehicle bodies, including automobiles and subway trains Special electrical equipment Product Advantages Outstanding insulation performance: With an ultra-low thermal conductivity, it achieves equivalent insulation results while being only one-fourth the thickness of traditional materials. Excellent fire resistance: The unique raw materials and production processes of this product ensure excellent resistance to flame impact. Superb physical strength: It possesses strong structural integrity and exhibits excellent tensile and compressive strength among lightweight insulation materials. Ultra-thin thickness: Multiple ultra-thin thickness options are available for selection.
Product Description Specifications Quarter Package: Improved Nylon with Revel CX Technology Excellent support and stability, ideal for the beginner or casual player CX Tech provides enhanced comfort and performance through its compression molding process Heat moldable for a custom fit and reduced break-in time Flexible tendon guard, forward boot rake (or lean) and toe spring all help promote the ideal roller hockey stride Liner: Comfortable brushed Nylex that also wicks away moisture Tongue Construction: Two-piece, Vented Pro Felt Thick design protects the top of the foot from impacts and lace-bite Ventilated center to promote consistent airflow Outsole: Embossed PVC Plastic Delivers a perfect balance of lateral support and forgiveness Frame: Two-Piece Alkali Rize Aluminum Chassis Larger rear wheels with smaller front wheels increase agility without compromising top-end speed Sizes 1.0-3.0 /(2) 59mm in the front and (2) 68mm in the rear Sizes 4.0-5.0 /(2) 68mm in the front and (2) 72mm in the rear Sizes 6.0-13.0 /(2) 76mm in the front and (2) 80mm in the rear Square Flush 6mm Axles Wheels: Alkali Cerberus 74A Indoor Wheels Single-pour construction Bearings: ABEC 7 608 Bearings Skate Width: D Weight: TBD
This machine is one kind of double side rotary tablet press machine, which can press granular materials into round shape tablet, irregular tablet or double-side engraved tablet. This machine is mainly used in pharmaceutical, chemistry, foodstuff, electronic industries. Feature 1.High speed with large quantity punches, double press rollers, suitable for mass production. 2.Made of stainless steel, the housing is fully closed. The surface of the rotary turret is covered with a hardened layer so that the turret surface is wear resistant. The machine conforms to GMP requirements. 3.Perfect tableting system, twice compression forming, reasonable framework with proper space and big pressure roller, machine performance is reliable and no tablet weight difference. 4.Double impeller type force feeder, improve granules flow-ability and filling performance, ensure the filling precision. 5.Tooling track adopt double-side lifting structure, the punches are balanced stress and wear resistance. 6.High performance electrical control system, ensure each program processing precisely. 7.Automatic oil&grease central lubrication system, ensure the lubrication of pressure rollers, toolings and tracks, extending the working life of the machine.
This machine is one kind of double side rotary tablet press machine, which can press granular materials into round shape tablet, irregular tablet or double-side engraved tablet. This machine is mainly used in pharmaceutical, chemistry, foodstuff, electronic industries. Feature 1.High speed with large quantity punches, double press rollers, suitable for mass production. 2.Made of stainless steel, the housing is fully closed. The surface of the rotary turret is covered with a hardened layer so that the turret surface is wear resistant. The machine conforms to GMP requirements. 3.Perfect tableting system, twice compression forming, reasonable framework with proper space and big pressure roller, machine performance is reliable and no tablet weight difference. 4.Double impeller type force feeder, improve granules flow-ability and filling performance, ensure the filling precision. 5.Tooling track adopt double-side lifting structure, the punches are balanced stress and wear resistance. 6.High performance electrical control system, ensure each program processing precisely. 7.Automatic oil&grease central lubrication system, ensure the lubrication of pressure rollers, toolings and tracks, extending the working life of the machine. 8.Special oil proof, dust proof and noise proof design.
PP Dunnage Air Bag Most in-transit cargo damages is caused by displacement & impacts when the cargoes are not secured properly. PP Dunnage Air Bag can protect cargoes effectively during most types of transportation via filling voids, bracing cargoes, absorbing vibration, avoiding cargoes sliding & impacts. Effectively and efficiently with protecting cargoes effectively, lowering logistics cost substantially, easy handling, raising protecting in logistics, PP Dunnage Air Bags has been widely used as padding material & securing products, supplying reliable protection on in-transit cargoes to avoid cargoes damages which could be occurred anywhere, anytime. Lower logistics cost substantially, Secure cargoes effectively, Protecting cargoes from damages, Increase clientâ??s satisfaction, Enhance company & productâ??s image, get away from tedious claim procedures, Easy to handle, reduce time on securing cargoes, inflate & deflate air quickly, bear compression force more than 9.5tons, moisture resistance, re-usable, meet with ROHS requirement, AAR level 1 approved.
This Industrial Grade Compressor is a powerful and reliable solution for various industrial applications. Designed for heavy-duty use, this air compressor delivers optimum air pressure and efficiency. Powerful Performance: With a 2HP motor, this air compressor generates ample power to handle demanding tasks, providing a steady and continuous supply of compressed air. Large Air Tank: The generously sized 140-liter tank ensures an extended operation time, reducing the need for frequent refilling and improving overall productivity. Sturdy Construction: Built with industrial-grade materials, this air compressor is durable and designed to withstand rugged working conditions, ensuring long-lasting performance. User-Friendly Controls: The air compressor is equipped with easy-to-use controls and gauges, allowing operators to monitor the pressure and adjust settings effortlessly. Safety Features: The compressor is equipped with safety measures to prevent overheating and overpressure, ensuring safe and reliable operation. Versatile Applications: Whether it's powering pneumatic tools, inflating tires, or running air-powered machinery, this air compressor is capable of handling a wide range of tasks. Model No. BS-875 Power 2 HP, Single Phase Tank Capacity 150 Liters Max Pressure 8 Kg/cm2 / 120 PSI Air Delivery 8.2 CFM Motor Speed 1440 RPM Dimensions 940 x 432 x 1220 mm Weight 62 Kg
