Type C FIBCs refer to the class of FIBCs that actually protects against dangerous static discharges through grounding of the bag itself during the filing and discharging processes. These bags are safe when grounded because any electrostatic potential that builds up as a result of rapid filling or discharging quickly and safely exits the bag to ground via the network of conductive fibers woven into the fabric of the bag. This is true as long as the bag continually remains grounded. Specifications of the FIBC bulk bag: Item Specification Description Flexible Intermediate Bulk Container Construction 4-panel/U-panel/Circular/T ubular Size 90*90*100cm or as required Body Material 100% Virgin Polypropylene (PP) Color White, beige or as required Top spout, open, duffle top and others Bottom spout, plain, full open bottom and others Lifting Loops cross-corner, corner, tunnel lift and others Safe Working Load (SWL) 500kg-2000kg Safety Factor 5:1 or 6:1 Liner 50-120 micro PE liner available Printing One or three color available Document Pouch 1pc, size 26x35cm (A4) Instruction Label 1pc Customized Design available Logo Print available Origin China Shipment by sea or by air with mutual agreement Packaging & Delivery: Max Loading information: 1*20'GP: about 2800pcs, 20pcs/bale 1*40'GP: about 7500pcs, 20pcs/bale Or 1*20'GP: 3200pcs/20pallet, 160pcs/pallet 1*40'GP: 7040pcs/44pallet, 160pcs/pallet Max. Weight/container: 7.5 ton per 1x20'GP, 18 ton per 1x40'GP Delivery time: 25-30 days for non-peak time. Common sizes of FIBC bulk bags (cm): 90*90*100 90*90*120 90*90*140 90*90*150 90*90*180 95*95*95 95*95*120 95*95*140 95*95*180cm 99*99*200 100*100*100 100*100*120 110*110*140 105x105x135 105x105x240 Production Procedure: All the production processes from granulating, wire drawing, weaving, cutting, printing, sewing, testing and packaging etc. are all controlled in house. So we can control the quality and costs well, and can supply much competitive big FIBC bags (bulk bags or jumbo bags) for our clients. Factory Show: All the production processes from granulating, wire drawing, weaving, cutting, printing, sewing, testing and packaging etc. are all controlled in house. So we can control the quality and costs well, and can supply much competitive big FIBC bags (bulk bags or jumbo bags) for our clients.
Products offered by us are widely appreciated for their durability and eco-friendliness. Globally, our products are widely used in restaurant, cafes and Catering Services. OUR PRODUCTS ARE ---- NATURAL Areca sheaths are 100% from nature; no other additives or chemicals are used in the manufacturing process. Trees are not cut to harvest the sheaths â?? rather, nature puts down the sheaths for us to pick, use and send it back to nature. 100% Biodegradable being made from nothing else but an Areca sheath. Oven Safe: Up to 200 C and at least 6â?� away from the flame for approx. 30 minutes. Suitable for the freezer and Microwave safe: Up to 2 minutes on high. Suitable for packaging fruit and vegetables, the Leaf Sheath is composed of over 70% cellulose, providing a highly oxygenated base for fruits and vegetables to stay fresh longer. 100% leak-proof, resists OIL and WATER. Lightweight yet strong enough to be used with cutlery. Hygienic, non-odorous. Can be disposed of by composting or placed into a normal waste collection where they biodegrade into landfill without compromising our precious environment whatsoever. Can be used as animal fodder, cows, goats, and sheep love bio plates too! BIODEGRADABLE Since areca sheaths come straight from nature, they compost naturally within 2 months. SUSTAINABLE There are varieties of plates/bowls available; in addition, we can also manufacture CUSTOM SHAPED Plates, Trays and Bowls according to your requirements subject to meeting minimum buying quantities. PFA PPT on our products and images of our facility for your perusal and records. Once we receive your buying interest for a specific size and quantities we will quote you our best prices. Currently, we have the following sizes - Will be mailed on request. We believe very strongly that Matrix Retail Solutions can provide you with the level of service you expect and deserve and that we can establish a solid relationship with you. We would be grateful for any opportunity to enable us to earn your confidence in our services. We at Matrix Retail Solutions assure you that your business is very meaningful to our office and will receive the highest degree of attention and that your confidence in us will not be misplaced.
This kind of high power laser engraving machine for metal especially fit for processing high reflective material such as brass ,red copper and galvanize sheet etc . Features: a. The high power fiber laser engraving machine for metal with better laser beam quality , lower operating costs , less power consumption and longer working life by using the new generation IPG fiber laser source. b. Automatic energy saving mode: while stop over 5 minutes , machine automatically switch into â?? standby â?? mode , to reduce power consumption . c. Auto exchanging table with Hydraulic lifting system; ensure synchronous running for laser engraving machine for metal , reliable and stable d. The laser engraving machine for metal with remote function , can remotely monitor the running conditions of machine , much easier for service and faster response e. With ergonomic design , equipped with intelligent operation terminal , user-friendly and easy to learn f. The laser engraving machine for metal is equipped with PRECITEC new generation pro-cutter laser cutting head , optimized cutting process , monitoring cutting condition through APP use easily and friendly g.Eagle eye(CCD) technology , ultra fast positioning the sheet metal edge , minimum cutting down time , In addition , it also can process punching parts and precut parts ,due to secondary positioning function h. Optimized cutting technology with programmable laser frequency and focus position , to achieve high efficiency processing on different thickness& type sheet metal . ll cutting parameters can be programmed , no need human intervention Applicable materials Metal materials such as aluminum alloy , Galvanize sheet , Carbon steel , stainless steel , Brass , Red copper etc. Technical Parameter Maximum material size Wind3015: 3000x1500mm Wind4020: 4000x2000mm Wind6025: 6000x2500mm Laser power 3000W/4000W/6000W Maximum speed 140m/min Positioning Accuracy ±0.05mm(VDI/DGQ3441) Repeated accuracy ±0.03mm(VDI/DGQ3441) Model MACH2040/6025 Work environment Temperature 0-45â?? Humilityâ?¤ 80%ï¼?clean, less dust Maximum accelerated speed 2.2(G) Total Power 11kw/13kw/19kw Machine weight 10T/13.5T/15.5T Dimension Wind3015: 9800x3000x2200mm Wind4020: 12000x3500x2200mm Wind6025: 15500x4200x2200mm
This kind of high power metal laser engraving machine specially fit for processing high reflective material such as brass ,red copper and galvanize sheet etc . Features: a.The high power fiber metal laser engraving machine with better laser beam quality , lower operating costs , less power consumption and loger working life by using the new generation IPG fiber laser source. b. The Metal laser engraving machine equipped with PRECITEC new generation pro-cutter laser cutting head , optimized cutting process , monitoring cutting condition through APP use easily and friendly c. Eagle eye(CCD) technology , ultra0fast positioning the sheet metal edge , minimum cutting down time , In addition , it also can process punching parts and precut parts ,due to secondary positioning function d. Optimized cutting technology with programmable laser frequency and focus position , to achieve high efficiency processing on different thickness& type sheet metal . ll cutting parameters can be programmed , no need human intervention e. Automatic energy saving mode: while stop over 5 minutes , machine automatically switch into standby mode , to reduce power consumption . f. Auto exchanging table with Hydraulic lifting system; ensure synchronous running for metal laser engraving machine , reliable and stable g. The metal laser engraving machine with remote function , can remotely monitor the running conditions of machine , much easier for service and faster response h. With ergonomic design , equipped with intelligent operation terminal , user-friendly and easy to learn Applicable materials Metal materials such as aluminum alloy , Galvanize sheet , Carbon steel , stainless steel , Brass , Red copper etc. Technical Parameter Maximum material size 4000X2000 mm Laser power 4000W/6000W/8000W/10000W Maximum speed 170m/min Positioning Accuracy ±0.05mm(VDI/DGQ3441) Repeated accuracy ±0.03mm(VDI/DGQ3441) Model MACH2040/6025 Work environment Temperature 0-45 Humility 80%clean, less dust Maximum accelerated speed 2.2(G) Total Power 18kw/25kw Machine weight 13.5T/15.5T Dimension Mach4020: 12000*3500*2200mm Mach6020: 15500*4200*2200mm
500w fiber laser cutting machine, referring to laser cutting machine equipped with a 500W fiber laser generator, is a low-power model mainly for the cutting of metal sheets, which are widely used in advertising, lightning, metal processing and other industries. It is cheaper than high-power models. Then how much does a 500w fiber laser cutting machine cost? Well, it depends on brand and model. 18 years into business, we often receive customer feedbacks that home-made laser generators are no inferior to imported ones. We offer nothing but the best components, home-made and imported alike, for customers to choose from. As is known, imported components usually cost more than home-made ones because of the myth that machines equipped with â??importedâ?� configuration always have more stable performance. Nevertheless, as domestic manufactures have better laser generators to offer, many of our clients start turning their eyes back from overseas because test results show that home-made components are no inferior to, sometimes even better than, imported ones, which, however, cost much more. More important, they trust Hanâ??s Yueming Laser for our 18-year technical experience and our good reputation and they believe that a reputed brand ensures fine product quality. CMA1530-C-G-D 500w fiber laser cutting machine 1. Gantry rack transmission system, double AC servo motor, gear synchro-driven system, maximum acceleration up to 0.8G, ensuring high speed & accuracy operation; 2. Intensive chassis with high rigidity. Processed by large gantry milling machine through tempering and vibration aging, non-stress limiting the shape variables and stress relief of the machine within 0.02mm; 3. 500w fiber laser cutting machine adopted high-performance fiber laser generator, ensuring the high-quality-outcome of steel sheet processing; 4. Professional steel plate cutting software, easy to master and operate, lowering down the requirement of operating personnel; 5. Dedicated servo motor system for high performance fiber laser cutting, high-speed and real-time response, ensuring the conformity of cutting outcome; 6. Ultralow operating cost: 3~4KW/h (for laser generator only), 500w laser cutting machine able to cut sheet metal with compressed air. CMA1530C-G-A 500w fiber laser cutting machine, introduced by Hanâ??s Yueming Laser Group, Co. Ltd., is perfect for the cutting of metal sheets to the satisfaction of metal processing industry. This model has been very popular among our clients at home and abroad. -
Nomenclature:Common name dimethomorph (BSI, draft E-ISO); dime homorphe ((m) draft F-ISO)IUPAC name (E,Z)-4-[3-(4-chlorophenyl)-3-(3,4-dimethoxyphenyl)acryloyl]morpholine Chemical Abstracts name (E,Z)-4-[3-(4-chlorophenyl)-3-(3,4-dimethoxyphenyl)-1-oxo-2-propenyl]morpholine CAS RN [110488-70-5] EEC no. 404-200-2 Development codes CME 151 (Celamerck); SAG 151; WL 127 294 (Shell); AC 336379; CL 183776; CL 336379 (all Cyanamid); BAS 550F Physical Chemistry:Composition (E)- to (Z)- ratio is c. 1:1. Mol. wt. 387.9 M.f. C21H22ClNO4 Form Colourless to off-white powder to crystals. M.p. 125.2-149.2 ; (E)- isomer 136.8-138.3 ; (Z)- isomer 166.3-168.5 V.p. (E)- isomer 9.7 ´ 10-4 ATXht981131 mPaATXht0 ; (Z)- isomer 1.0 ´ 10-3 ATXht981131 mPaATXht0 (both 25 ) KOW logP = 2.63 (E)- isomer; 2.73 (Z)- isomer (both 20 ) Henry (E)- isomer 5.4 ´ 10-6 Pa m3 mol-1; (Z)- isomer 2.5 ´ 10-5 Pa m3 mol-1 S.g./density Bulk density 1318 ATXht981107 kgATXht0 /m3 (20 ) Solubility In water 81.1 (ATXht981151 pHATXht0 5), 49.2 (ATXht981151 pHATXht0 7), 41.8 (ATXht981151 pHATXht0 9) (all in ATXht981123 mgATXht0 /l, 20). In n-heptane 0.12 (E), 0.053 (Z); xylene 22.2 (E), 6.4 (Z); 1,2-dichloroethane 182.5 (E), 92.5 (Z); ethyl acetate 46.6 (E), 9.5 (Z); acetone 105.6 (E), 18 (Z), methanol 33.5 (E), 7.5 (Z) (all in ATXht981123 mgATXht0 /l). In n-hexane 0.11, methanol 39, ethyl acetate 48.3, toluene 49.5, acetone 100, dichloromethane 461 (all for (EZ), in ATXht981123 mgATXht0 /l). Stability Hydrolytically and thermally stable under normal conditions. Stable for >5 years in the dark. The (E)- and (Z)- isomers are interconverted in sunlight. pKa -1.305 (ATXht98124 calc.ATXht0 ) F.p. Not flammable
Customized Embossment Door Cabinet PVC Edging Strip for Plywood Width 12~150mm,Customized sizes can be organized Thickness 0.4~3mm,Customized sizes can be organized Surface Soild Color Collection ,Wood Grain Collection,Glossy Surface Collection, Embossing Collection,We can also develop your customized designs and colors. Material ABS,PVC or Melamine ,Environment friendly materials to your request. MOQ 5000 meters Usage It is used for furniture,office furniture, wooden doors, cabinets etc. Packing 100m/roll, 200m/roll, rolls in carton, or according to your requirements. Customized design, logo, words can be done on cartons, labels or products. Delivery Time 15-20 days Payment T/T, L/C Price terms FOB XIAMEN Supply Ability 2 Tons per day Temperature High Temperature and Low Temperature resistant Certifacation SGS test report and ISO9001-2008 certifacation Quality assurance:Xiamen Yimin edge banding quality is the NO. 1 from China . Q1.Are we a professional manufacturer? A1:Yes. We are professional manufacturer of edge banding . Our products are widely used in office furniture, kitchen cupboards, construction decoration and customized furniture products etc. Q2: What is the Quality Warranty for the edge banding ? A2: We will strictly keep the same quality as sample confirmed by both of us.If any quality problems on our side were found in this period,we will send you the replacement in your next new order . Q3 : What type of certifacation you provide ? A3:We provide SGS test report and ISO9001-2008 certifacation. Q4:Can free samples provided? A4:Yes. We are very honored to provided free samples by courier express, like DHL,UPS or Fed-ex. Q5:Can I customized my order? A5: Yes. As a professional edge banding supplier, we accept OEM & ODM,include color, size, type ,logo and material. Q6 : Can we get support if we have our own market position ? A6: Please inform us your detailed schedule on your market demand ,We will discus and propose helpful suggestion for you to find the best solution .
Material Gcr15 Material/Chrome Steel Quality P0,P6 Cage,Retainer MB,CA,CC,E Housing P,F,FS,FL,FC,T Series UC200series,UC300series,UK200series,UK300series, SA200series,SB200series Certificate ISO9001:2008,CE Service OEM&ODM Market Europe,South America,North America,Middle East,Southeast Asia Application used in many areas of large steel mills, aviation,aerospace,marine,railway,metallurgy,steel, mining,electricity,machinery manufacturing,printing, electronics,textiles,food,chemical,automotive etc Ball Bearing Deep Groove Ball Bearing 60 **,618 ** (1008), 619**(1009),62 **, 63 **, 64 **, 160 **(70001 ) Thrust Ball Bearing 511 ** (81) ,512 **(82) ,513 (83) ,514 ** (84) series and Angular Contact Thrust all Bearings like: 5617 ** (1687) ,5691 ** (91681), 5692 ** (91682) series Angular Contact Ball bearing SN718 **(11068 ) ,70 ** 72 **,73 **, and B (66), C (36), AC (46) series ; otherwise include QJ and QJF series Roller Bearing Spherical Roller bearing 239**, 230**,240**, 231**, 241**, 222**, 232**, 223**, 233**, 213**, 238**, 248**, 249**and special series include 26** i.e 2638 (3738), 2644 (3844) and so on Taper Roller Bearing 329**(20079),210**(71), 320**(20071),302**(72), 322**(75), 303**(73), 313**(273),323**(76), 3519**(10979), 3529**(20979),3510**(971), 3520**(20971),3511**(10977), 3521**(20977), 3522**(975), 319**(10076),3819**(10779),3829**(20779), 3810**(777,771), 3820**(20771), 3811**(10777,777) for example: 77752, 77788, 77779 and also include Inch series bearings suchas 938/932 single and double row i.e M255410CD etc. Thrust Roller Bearing 292**(90392), 293**(90393),294**(90394),994**(90194), and 9069 series. Cylindrical Roller Bearing NU10**, NU2**,NU22**, NU3**,NU23**, NU4**, N, NJ ,NUP series as well as NB, NN, NNU series of big bearings, and we also have Split Bearings 412740, 422740 used in cement industry.And FC, FCD series used inSteel Industry.
Material Gcr15 material/chrome steel Quality P0, p6 Cage, retainer Mb, ca, cc, e Housing P, f, fs, fl, fc, t Series Uc200series, uc300series, uk200series, uk300series, sa200series, sb200series Certificate Iso9001:2008, ce Service Oem&odm Market Europe, south america, north america, middle east, southeast asia Application Used in many areas of large steel mills, aviation, aerospace, marine, railway, metallurgy, steel, mining, electricity, machinery manufacturing, printing, electronics, textiles, food, chemical, automotive etc Ball bearing Deep groove ball bearing 60 **, 618 ** (1008), 619**(1009), 62 **, 63 **, 64 **, 160 **(70001 ) Thrust ball bearing 511 ** (81) , 512 **(82) , 513 (83) , 514 ** (84) series and angular contact thrust all bearings like: 5617 ** (1687) , 5691 ** (91681), 5692 ** (91682) series Angular contact ball bearing Sn718 **(11068 ) , 70 ** 72 **, 73 **, and b (66), c (36), ac (46) series ; otherwise include qj and qjf series Roller bearing Spherical roller bearing 239**, 230**, 240**, 231**, 241**, 222**, 232**, 223**, 233**, 213**, 238**, 248**, 249**and special series include 26** i.E 2638 (3738), 2644 (3844) and so on Taper roller bearing 329**(20079), 210**(71), 320**(20071), 302**(72), 322**(75), 303**(73), 313**(273), 323**(76), 3519**(10979), 3529**(20979), 3510**(971), 3520**(20971), 3511**(10977), 3521**(20977), 3522**(975), 319**(10076), 3819**(10779), 3829**(20779), 3810**(777, 771), 3820**(20771), 3811**(10777, 777) for example: 77752, 77788, 77779 and also include inch series bearings suchas 938/932 single and double row i.E m255410cd etc. Thrust roller bearing 292**(90392), 293**(90393), 294**(90394), 994**(90194), and 9069 series. Cylindrical roller bearing Nu10**, nu2**, nu22**, nu3**, nu23**, nu4**, n, nj , nup series as well as nb, nn, nnu series of big bearings, and we also have split bearings 412740, 422740 used in cement industry.And fc, fcd series used insteel industry.
High quality China Bearing Roller Bearing Spherical roller bearing Model 22332,3632 Dimension 160*340*114mm Weight 52.2kg Greese/Oil As you requirement, such as SRL ,PS2, Alvania R12 and so on. Vibration Z1/V1,Z2/V2,Z3/V3 Hardness HRC58~HRC65 Bearing type GCR15 Material (Chrome Steel) roller bearings Quality level Reach the same level as Japanes and European bearings, P0 P2 P4 P5 P6.. Feature low noise,high speed,long life Application mining machinery, power machinery, heavy machinery and textile machinery, etc. Delivery time 1,It's mainly depend on your order; 2, Usually about 7-15 days Payment terms T/T, L/C,Western Union,etc Package 1,barreled package+outer carton+pallets 2,single box+outer carton+pallets 3,tube package+middle box+outer carton+pallets 4,According to your's requirement Brand X&Y WYP SRBF;Also we can do the brand as your needs Service OEM,Design service;Buyer label service Company Certifications ISO 9001:2008,BV,CE Main Markets Eastern Europe,South America,Domestic Market, Brazil,Russia, North America,Turkey etc. Main Products 1,Ball Bearings (Deep Groove Ball Bearing, Angular Contact Ball Bearing, Thrust Ball Bearing, Self-aligning Ball Bearing); 2,Roller Bearings (Taper Roller Bearing, Cylindrical Roller Bearing, Thrust Roller Bearing, Spherical Roller Bearing); 3,Pillow Block Bearing Details We have complete process for the production and quality assurance to make sure our products can meet your requirement. 1.Assembly 2.Windage test 3.Cleaning 4.Rotary test 5.Greasing and gland 6.Noise inspection 7.Appearance inspection 8.Rust prevention 9.Product packaging Spherical Roller Bearings is mainly used to bear radial load, it also can bear a certain axial load. It boasts big load-bearing capacity and nice efficiency of self aligning. Spherical roller bearings are widely used in mining machinery, power machinery, heavy machinery and textile machinery, etc.
Rock wool is a high quality thermal insulation material with low thermal conductivity. Suitable for medium and large diameter pipes; medium and small storage tanks; curved surfaces with small radius of curvature or surface irregularities. Rock wool is made of basalt,After being melted, adopted four-roller centrifugal cotton process to throw the high-temperature basalt-cotton into a 4-7 μm non-continuous fiber. Our rock wool PH value between 7-9, soluble chloride ion content is low, in addition to the non-corrosive steel structure and metal structure, the main features are as follows: Thermal insulation: The thermal conductivity of rockwool at normal temperature (around 25°C) is usually between 0.03 and 0.047W/. Non-combustion : The combustion performance of rock wool products depends on the amount of flammable binders. Rock wool is an inorganic mineral fiber, non-flammable. Sound insulation: rock wool products have excellent sound insulation and sound absorption properties. The mechanism of sound absorption is that this product has a porous structure. When sound waves pass through, friction is generated due to the effect of flow resistance, and part of the sound energy is absorbed by the fibers. Impede the transmission of sound waves. Can be cut according to the security, less security, easy construction Tanks, such as gas and liquid storage, play an important role in every major area of industry. In order to preserve the material and ensure the stability and safety of the production process, it is important to maintain the temperature inside the tank. If the internal temperature of the oil tank is too high, not only the volatile loss of the oil will increase, but also the environmental pollution will be accelerated, and if the temperature is too low, the objects in the tank will become viscous so that the fluidity of the oil will decrease and the oil tank is outdoor for a long time, so when selecting the insulation material, it must have two functions: low thermal conductivity and waterproof performance Rock wool has been tested without asbestos, CFC, HFC, HCFC, and other environmentally harmful substances. It will not be corroded or produce mildew and bacteria. It has excellent performance for the insulation of oil tanks. As a thermal insulation material, rock wool can increase the thermal insulation resistance of the tank walls, reduce the heat transfer coefficient, and reduce the cold/heat transfer through the wall by 70%. This reduces energy loss and saves energy costs.
Have you heard of converting waste plastic into oil? That's right, DoingGroup already has a very mature cracking device that heats waste plastics at high temperatures to crack fuel, carbon black and combustible gases. Perhaps some people do not know too much about the waste plastic pyrolysis plant. The specific operating procedures for the equipment are as follows: 1. The waste plastic into the reactor by automatic push device. 2. Reactor with fuel heating, reaching a certain temperature, waste plastics began to crack into oil and gas. 3. These oil and gas will enter the condensing system, a part of which will be liquefied and flow into the oil tank. The other part will be liquefied through the condensing system to liquefy into heavy oil and flow into the tank. 4. The resulting heavy oil will be filtered through the dedusting and deodorizing device. Remove fumes, dust particles generated during combustion of the fuel. 5. Wait until the temperature in the kettle drops below 40 C and remove the carbon black from the kettle. Know the working principle of waste plastic pyrolysis plant, equipment may be more interested in the proceeds. After our engineers accurately test and run our equipment can get nearly one million yuan a day's revenue, these benefits mainly come from the equipment cracked the fuel and carbon black. They have a wide range of uses in life, as follows: 1. Fuel oil: Mainly used in steel plants, boiler heating, heavy oil generators, cement plants. 2. Carbon black: mainly used for pressure ball burning and refined milling. Which refined flour and can be used for new tires, rubber soles, pigment manufacturing materials. So what are the unique advantages of our equipment? Specifically the following points: 1.16mm, Q245R thick steel boiler plate, curved pressure head, can withstand high temperature and high pressure. 2. Unique 3-step welding process, longer service life. 3. Currently the most commonly used and best performing condenser in the oil industry. The cooling system of the equipment is divided into three stages to ensure that the cracked oil and gas is fully cooled and the oil yield is increased. 4. A water separator, water seal, vacuum devices and other safety devices. Can purify oil and gas, exhaust, to prevent its back. And can provide negative pressure, drainage of oil and gas. Through the above introduction, you have a further understanding of our waste plastics pyrolysis plant?
single lever chrome plated brassfaucet for bathroom Product Description Material:A degree Brass Body, Zinc Alloy Handle Quality guarantee:5 years Certificates:ACS, CE, ISO9000, cUPC, WaterMark, SASO, NSF,Low-Lead ;EN1111 ; EN817 LOGO:Customized Logo OEM & ODM:Accepted and Provided Packaging & Shipping: Inner packing: cloth bag or pearl wool, Outer packing: kraft carton The package can be done as customers' requirements Company information: Freebay International Limited is one of the outstanding manufacturers of faucets, ceramics, toilet seat cover, Shower and accessory in Xiamen, China. As a professional manufacturer, we always place great emphasis on quality control, Relying on strict procedures, all products are supervised and tested at each stage. With reasonable prices and reliable quality, we export to Europe, the Middle East, South America, and Southeast Asia. Furthermore, we have obtained a good reputation for over ten years especially in markets of Russia, Poland, Ukraine, Romania, the UK, France, Saudi Arabia, Kuwait and other countries and regions. the subsidiary of SongFeng ceramic company Limited, come from former factory is Taifeng which was founded in 1990, specialized in ceramic and sanitary products. Designed with the requirements of international market in mind, our faucets are available in different styles and specifications. Moreover, we can also design products according to customers' samples. Superior quality and reasonable prices are our main advantages. In addition, excellent services and on-time delivery also have helped us win a large number of customers and great markets. If you are interested in any of our products, please contact us freely for more details. We are looking forward to building business relationships with companies from all over the world in the near future. FAQ 1.Where is your factory? Our factory is located in Xiamen, Fujian province, China. 2.Can your factory print our logo on the product? Our factory can laser print customer's logo on the product with the permission from customers. 3.Can I have some samples? Of course you can, samples are always available for you. 4.What method of payment do you support? L/C, T/T 5.Is the faucet has manual paper? Yes, we can provide manual for you. 6.How long is the production lead time? It takes 30-45 days. We have large production capacity which can ensure fast delivery time even for large quantity. If you have any other questions, please do not hesitate to contact us.
Chrome plated brass kitchen faucet Product Description Material: A degree Brass Body, Zinc Alloy Handle Quality guarantee: 5 years Certificates: ACS, CE, ISO9000, cUPC, WaterMark, SASO, NSF,Low-Lead ;EN1111 ; EN817 LOGO: Customized Logo OEM & ODM: Accepted and Provided Packaging & Shipping Inner packing: cloth bag or pearl wool, Outer packing: kraft carton The package can be done as customers' requirements Company information: Freebay International Limited is one of the outstanding manufacturers of faucets, ceramics, toilet seat cover, Shower and accessory in Xiamen, China. As a professional manufacturer, we always place great emphasis on quality control, Relying on strict procedures, all products are supervised and tested at each stage. With reasonable prices and reliable quality, we export to Europe, the Middle East, South America, and Southeast Asia. Furthermore, we have obtained a good reputation for over ten years especially in markets of Russia, Poland, Ukraine, Romania, the UK, France, Saudi Arabia, Kuwait and other countries and regions. The subsidiary of SongFeng ceramic company Limited, come from former factory is Taifeng which was founded in 1990. Designed with the requirements of international market in mind, our faucets are available in different styles and specifications. Moreover, we can also design products according to customers' samples. Superior quality and reasonable prices are our main advantages. In addition, excellent services and on-time delivery also have helped us win a large number of customers and great markets. If you are interested in any of our products, please contact us freely for more details. We are looking forward to building business relationships with companies from all over the world in the near future. FAQ 1.Where is your factory? Our factory is located in Xiamen, Fujian province, China. 2.Can your factory print our logo on the product? Our factory can laser print customer's logo on the product with the permission from customers. 3.Can I have some samples? Of course you can, samples are always available for you. 4.What method of payment do you support? L/C, T/T 5.Is the faucet has manual paper? Yes, we can provide manual for you. 6.How long is the production lead time? It takes 30-45 days. We have large production capacity which can ensure fast delivery time even for large quantity. If you have any other questions, please do not hesitate to contact us by mail to: freebaysales (at) 163 (dot) com We will send you our catalog for your reference once receive your mails.
Rock wool is a high quality thermal insulation material with low thermal conductivity. Suitable for medium and large diameter pipes; medium and small storage tanks; curved surfaces with small radius of curvature or surface irregularities. Rock wool is made of basalt,After being melted, adopted four-roller centrifugal cotton process to throw the high-temperature basalt-cotton into a 4-7 μm non-continuous fiber. Feature : Our rock wool PH value between 7-9, soluble chloride ion content is low, in addition to the non-corrosive steel structure and metal structure, the main features are as follows: Thermal insulation: The thermal conductivity of rockwool at normal temperature (around 25°C) is usually between 0.03 and 0.047W/. Non-combustion : The combustion performance of rock wool products depends on the amount of flammable binders. Rock wool is an inorganic mineral fiber, non-flammable. Sound insulation: rock wool products have excellent sound insulation and sound absorption properties. The mechanism of sound absorption is that this product has a porous structure. When sound waves pass through, friction is generated due to the effect of flow resistance, and part of the sound energy is absorbed by the fibers. Impede the transmission of sound waves. Can be cut according to the security, less security, easy construction Application : Tanks, such as gas and liquid storage, play an important role in every major area of industry. In order to preserve the material and ensure the stability and safety of the production process, it is important to maintain the temperature inside the tank. If the internal temperature of the oil tank is too high, not only the volatile loss of the oil will increase, but also the environmental pollution will be accelerated, and if the temperature is too low, the objects in the tank will become viscous so that the fluidity of the oil will decrease and the oil tank is outdoor for a long time, so when selecting the insulation material, it must have two functions: low thermal conductivity and waterproof performance Rock wool has been tested without asbestos, CFC, HFC, HCFC, and other environmentally harmful substances. It will not be corroded or produce mildew and bacteria. It has excellent performance for the insulation of oil tanks. As a thermal insulation material, rock wool can increase the thermal insulation resistance of the tank walls, reduce the heat transfer coefficient, and reduce the cold/heat transfer through the wall by 70%. This reduces energy loss and saves energy costs.
Highway bridge hanging basket form traveller Form Traveler is used Balance Cantilever Construction Method. Highway bridge hanging basket form traveller is easier to be use compare to Under Slung Model. And it is easier to be modified for future usage. Our Highway bridge hanging basket form traveller are with good quality modular connection, designed for future modification and repeated usage for many years. We supply good quality metal formwork. We also provide plywood formwork system as it is a more economical solution. Concreting Support, self-launching operation, level adjustments are all by means of hydraulic system. Erection of the Highway bridge hanging basket form traveller on the pier top can be as short as 1 week. All major parts join together by pin connection, which promises speedy erection and high accuracy design. Our Company Henan Shenghua Heavy Crane Group is a big enterprise specialized in researching, developing, producing and exporting. It mainly produces overhead crane and gantry crane, beam launcher, movable scaffolding system crane, Highway bridge hanging basket form traveller, straddle carrier, tyre transportor, beam trolley, portal crane and electric winch, electric hoist and all kinds of accessories, which widly cover machinery, metallurgy, electric power, railway, water conservancy, ports, terminals and other industries. Shenghua Heavy Crane Group have more than 600 staff, and covers 200,000 square meters. Our advantages: A. More than 50 R&D personnel with advanced Science and technology. B. More than 400 sets advanced Production processing equipment and inspection equipment. C. Independent intellectual property rights to develop energy saving bridge cranes, gantry cranes, and electric hoist. D. Obtain ISO 9001 certificate and more than 10 series of patent certificates. E. Efficient service and competitive products. F. Export more than 100 countries. Packing & Delivery Packing 1. Hydraulic parts are packed by high quality plywood crate to reduce distortion. 2. Structure are packed by plastic woven cloth to reduce abrasion during transporting. Delivery 1. If the size of Highway bridge hanging basket form traveller are suitable for container ship, usually by container. 2. If the size is too big, usually by bulk ship or by container after disassembly. 3. Transport ways are based on reducing cost and keep the Highway bridge hanging basket form traveller performance. Delivery time Could be delivered within 30 to 40 days after the receipt of deposit. Transportation Generally 35 days to 50 days to destination port.
Hipped geomembrane for landfill closures waterproof liner 0.1mm-3mm/m2 1. Geomembrane specifications 1) Thickness : 0.15mm - 4.0mm. 2) Width : Within 8 m (1m-8m). 3) Length : 50m-100m/roll (as request). 4) Material : HDPE,( LDPE, LLDPE, PVC, EVA ). 5) Color : Black , white , red , blue , or as required. 6) Optional surface : Textued(one or two side) or smooth surface. 7) Certificate:CE/ISO9001,14001 2. HDPE geomenbrane Features Good mechanical properties, high tear strength, deformation and adaptable, puncture resistance, anti-aging, anti-ultraviolet-resistant, Anti oil and salt, pH, anti-corrosion, high temperature-resistant, non-toxic, long service life. water, drainage, seepage, the good effect of moisture, width, thickness of the full range of specifications and low cost, simple construction. 3. HDPE Geomembrane Applications 1) Environmental protection, sanitation (such as solid waste landfills, sewage treatment plants, power plants Chi-conditioning, industrial, hospital solid waste, etc.) . 2) Water (such as rivers, lakes and reservoirs of the anti-dam, plugging, reinforcement of the canal seepage, the vertical wall of the heart, slope protection, etc.). 3) Municipal Engineering (subway, on the ground floor of the building, planted roof, the roof garden of anti-seepage, sewage pipes lining, etc.). 4) Landscape (man-made lake, river, reservoir, golf courses reservoirs of the substrate, slope protection, green lawn of the waterproof moisture, etc.). 5) Petrochemical (chemical plants, oil refineries, gas storage tanks of the anti-chemical reaction tanks, sedimentation tanks of the lining, etc.). 6) Mining (washing and pool heap leaching, the ash-field, dissolved, precipitation, the yard, the tailings seepage substrates, etc.) HDPE geomembrane NO. Items Value Common Environment 1 Thickness (mm) 0.2 - 4 2 Width (m) 2.5 - 8 3 Tensile Strength(TD/MD) MPa ?7 ?¥25 4 Elongation at Break(TD/MD) % ?¥4550 5 Strength at Tear(Right-angle Tear) N/m?110 6 Carbon black content % 2.0 - 3.0 2.0 - 3.0 7 Anti-crack F20 ,1500 8 -70low temperature impact brittle prope pass 9 Oxidative Inducement Time at 200°C,m20 LDPE geomembrane NO. Items Value 1. Thickness (mm) 0.2 - 3 2. Width (m) 2.5 - 9 3. Tensile Strength(TD/MD)MPa14 4. Elongation at Break (TD/MD) 400 5. Strength at Tear(Right-angle Tear)N/m50 6. Permeability coefficient of Vapour(g.cm/cm2.s.p)
The China HSHCL 1500 ton concrete bridge launcher crane hydraulic is used to construct prefabricated spans up to 60m long. It is designed and fabricated in order to ensure high performances, efficiency, safety, flexibility and multiple successive utilization. Independent supports relocation system. Independent stressing platform handling system. Service overhead crane. Radio remote controls for all operations. Radio remote controlled spreader beam for segment positioning. Safety Features Safety is the most important issue for China HSHCL 1500 ton concrete bridge launcher crane hydraulic. To ensure the safety, the following safety devices are equipped in 1500 ton concrete bridge launcher crane hydraulic. Crane traveling limit switch. Overload protection device. Lifting height limit device. Voltage lower protection function . Phase sequence protection function. Emergency stop function. Rain cover for outside hoist, driving units, electric cubicle. Warning indicator : flashing nights and warning sounds. Wire-less infra-detector for anti-collusion. FAQ 1. Whatâ??s the information should I provide when inquiry about the China HSHCL 1500 ton concrete bridge launcher crane hydraulic? we need the Bridge Drawing, the Maximum longitudinal slope and the Maximum Transverse slope. The Girder/beam drawing. 2. How many kinds of construction methods for bridge launcher? 1. overhead segmental. 2. underslung segmental. 3. balanced cantilever erection segmental launching gantry. 4. full span. 3. What are inspection standard for load test of bridge launcher? a. Dynamic load test 1.1 times rated load, main girder does not down deflection, all mechanisms work well, performance parameters meet the design demand, all limit switches and safety protection interlock devices are reliable, all spare parts does not have cracking and flexible connection, all motors and contactors are not overheat. b. Static load test 1.25 times rated load, all mechanisms work well, the crane stops 20-30 min as trial load is lifted 10 cm high, then measure main girder down deflection(theodolite, ruler). Put down trial load to measure main girder upper camber, repeat 3 times, steel structure does not have permanent deformation; 4. How to make highway bridge concrete girders? Highway Bridge concrete girders could be made by 4 methods: Full span prefabrication. Segment girder prefabrication. Full span cast-in-place girder. Segment cast-in-situ. 5.How about maintenance of bridge launcher? a. Lubricating. b. Steel wire rope. c. Spreader. d. Pulley block. e. Wheels. f. Brake.
BATTE Multicomponent Formula Loss-in-weight Feeder is applied for accurate bulk ingredient batching. This feeding system can be applied with every BATTE loss-in-wegiht feeder thanks to our special batch programs for the single and multi-feeder controllers. Techinical Parameter for BATTE Multicomponent Formula Loss-in-weight Feeder (LF Series) Main Components of BATTE Multicomponent Formula Loss-in-weight Feeder (LF Series) Working Principle of BATTE Multicomponent Formula Loss-in-weight Feeder (LF Series) This system measures the hopper weight when staring batch, and switch ingredient dispense off once reaching the fixed weight computed by the controller after the fixed batch has been entered. The Advantage of BATTE Multicomponent Formula Loss-in-weight Feeder (LF Series) Our feeder system adopts digital high resolution load cells, serial weight data transmission to the high-tech controller and special modes of approaching the fixed weight, all of which guarantee the high accuracy. Quality Control System Fixed Equipments for Q/C Qualified Adequately before Reaching Warehouse Randomly Checking Machines before Shipment Our Value-added Service Package 1. Installation Services: During the period of installation and debugging, we shall offer training about effective operation and maintenance. 2. Technical Services: Our company has been devoting ourselves into offering custom transforming projects for our worldwide clients in the field of medical, chemical engineering, plastics, rubber industries etc. We can assist our clients to solve all kind of technical problems with our capable technician team, and we own adequate experience for production line transformation as well as formula feeding arrangement. 3. Warranty Services: We offer free after sale service except the engineers' traveling expense for any quality problem occurs during our 12 months warranty period. Lead Time: 5-6 weeks after receiving the 30% prepayment. The attachment is some of our solution cases we provided for our clients, you can well refer to it. You are welcome to contact us in case you have any question or suggestion about our products or solution case.
Up&Down table laser engraving machine for jewelry Specification : Model Number:CMA6040Kâ?¡ Voltage :AC220V±10% Frenquencyï¼?Hzï¼?: 50/60 Mark area :600mmX400mm Weight(kg):260 Support Ethernet&USD2.0 transmission Lifting Height :315mm Machine dimension: 1850x920x1100mm Engraving speed : 0-30mm/min Laser Type :CO2 Industrial Laser machine Laser Power(W) : 60-130 Brand Name : YueMing Certification :CE,ISO,FDA After-sales service :Overseas office Control system : Self-developed Smart Carver software and motion controller Application : Laser engraving machine for jewelry Working environment :Clean , Less dust; Temp:5-40â??ï¼? Humidity : 5-80% Feature: a. Support work time preview and interruptible engraving recovery after power-off b. Support dynamic display of trajectory and coordinate points ,real-time work track display c. Specially designed and configured power-driven lifting platform makes it easier for customer to hollow and engrave materials with different thickness d. Support Ethernet (10/100M) and USD2.0 transmission , the maximum speed is 12M, longest distance 5m. High efficiency and no signal distorted in long distance transmission e. Self-developed Smart Carver software and motion controller with high-speed motion interpolation algorithm to achieve high speed and stable working . f. Optional professional rotary device for engraving or cutting the cylindrical products such as laser engraving machine for jewelry. Packaging & Delivery Packaging Details Standard packing wooden case Delivery Time Shipped in 15 days after payment Applicable Material : Laser engraving machine for Jewelry and Non-metallic materials like wood , paper , leather , fabric ,fur, plastic , rubber and plexiglass etc Company profile : GD HANâ??S YUEMING LASER GROUP CO., LTD , A subsidiary of Hanâ??s Laser Technology Co., Ltd(stock code:002008),is as hi-tech enterprise focus on laser machine manufacturing and R&D since 2001.The product varies from laser cutting machine to laser marking machine manufacturer .Hanâ??s YueMing has been always sticks to its mottos â??win the market with advanced technology, reward customers with best serviceâ?? . So far , 78931 sets laser machines have been sold to more than 100 countries . scb2018ym -
