Zinc Ingots 99.99 Zinc ingots are suitable for a wide range of applications and are especially useful in corrosion resistance. Much of the volume produced is used for galvanizing. Zinc ingots can create an anti-corrosion process to protect steel products and can also be used to cast small parts.
Aluminum A7 Ingots available for
Zinc Purity and Impurities Specification Zinc Purity: Range 1: 99.96% - 99.97% Range 2: 99.97% - 99.98% Range 3: 99.98% - 99.99% Impurities: Pb (Lead) For Range 1: Min 230 ppm - Max 300 ppm For Range 2: Min 160 ppm - Max 230 ppm For Range 3: Min 75 ppm - Max 160 ppm Fe (Iron) For Range 1: Min 25 ppm - Max 30 ppm For Range 2: Min 20 ppm - Max 25 ppm For Range 3: Min 10 ppm - Max 20 ppm Cu (Copper) For Range 1: Min 15 ppm - Max 20 ppm For Range 2: Min 10 ppm - Max 15 ppm For Range 3: Both Min and Max at 10 ppm Cd (Cadmium) For all ranges (Range 1, 2, and 3): Min 5 ppm - Max 10 ppm.
aluminium ingot. cooper cathode, concentrate.
Zinc ingots
Greetings We have aluminum ingots available in Jeddah for local buyers Donot hesitate to call me if you are interested Best wishes
Aluminum ingots A7, A8.
Please find our AL Ingot offer here below, OFFER I / USA ORIGIN %99.70 Alloy Or Not: Non-alloy Secondary Or Not: Non-secondary Chemical Composition: Al Weight: 25kg Al (Min): 99.70% Color: silvery white Purity: 99.70%MIN MIN Quantity: 1.000MT Price: 1350USD per ton Payment: %20 will pay against proforma + %50 will pay after loading against BL+SGS & balance %30 balance pay at delivery port Loading: 7bdays after payment ***-*** OFFER II / SPAIN ORIGIN %99.90 Non-alloy Non-secondary Chemical Composition: Al Weight: 20-25kg Al (Min): 99.90% Color: silvery white Purity: 99.90%MIN MIN Quantity: 1.000MT Price: 1400USD per ton (IT CAN PAY WITH EURO CURRENCY IN BUYER OPTION) Payment: %20 will pay against proforma + %50 will pay after loading against BL+SGS & balance %30 balance pay at delivery port Loading: 7bdays after payment **-**
Please find our offer here below: - Zinc Ingot (specs attached) - 700MT - Europe, Africa, Middle east, Far east, Med sea - Price: 2.100USD Per ton - Payment: %20 will pay against proforma + %50 will pay after loading against BL+SGS & balance %30 balance pay at delivery port - Loading in 5-8bdays after payment.
Product Description Aluminium thin sheet scraps are suitable to produce ingot grade AC 4 A by adding Si, Mg and reducing Mn. Aluminium elctrical wire scraps are suitable to produce ingot grade ADC 1 by adding Si, grade ADC 3 by adding Si, Mg, grade ADC 6 by adding Mg grade ADC 10, ADC 12 by adding Si, Cu. Origin :- China , Germany Payment Terms :- LC/SBLC
Commission x TM Purchase Sale Price x MT Minors of 100,000 MT Quality USD 3,00 USD 2.350,00 USD 2550 Aluminum 99.27% USD 3,00 USD 1.950,00 USD 2,000 Aluminum 99.24% CIF PRICES ASWP Procedures The buyer issues a letter of Intent (LOI) or an irrevocable corporate purchase order (ICPO). Seller issue a complete Corporate Offer(FCO). Buyer signs and stamps FCO page and returns to the seller. The seller issues a draft of the sale agreement (SPA) that will incorporate the terms and full conditions. Buyers signs and stamp Each SPA page and return it to the seller. The seller completes the SPA, signs and stamps it and issues a PROFORMA INVOICE. Buyer's Bank issue DLC verbiage, which the seller's Bank reviews and approves. The seller will send the "Product Test" within 5 working days after the issuance of the draft MT705. The test includes: a) Recent SGS report. b)the asset certificate. c) manufacturing brochure. Within 3 international banking days, the buyer's bank issues irrevocable, transferable SBLC/MT760 and DLC/MT700 confirmed to the seller bank (of the top 50 banks) The buyer will be invited to the port of loading for inspection during loading at the buyer's expense. Shipments will begin within 35 to 45 days of SBLC/MT760- DLC/MT700 approval by the seller's bank. All original documents will be sent to the buying bank via the selling bank via DHL. The buyer's bank makes payment to the seller's bank immediately after loading the material and an SGS report from an independent SGS appraiser is provided. In The Products, The Prices And Commissions Can Be Improved Depending On The Method Of Payment And Quantities
copper ingot a5 isotope
Aluminium Ingots A5N and A6N 99,9999% 650Kg
Aluminium Ingots
Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth. Introduction Aluminum is a silver-white metal that ranks third in the earth's crust after oxygen and silicon.Aluminum is less dense, only 34.61% of iron and 30.33% of copper, so it is also called light metal.Aluminum is the world's output and usage are second only to steel non-ferrous metals.The density of aluminium is only 2.7103g/cm3, about a third of that of steel, copper or brass.Because of its light weight, aluminum is often used in the manufacture of vehicles, trains, subways, ships, airplanes, rockets, airships and other land, sea and air vehicles to reduce the dead weight and increase the loading capacity. In our daily industrial raw materials called aluminum ingots, according to the national standard (GB/T 1196-2008) should be called "remelting with aluminum ingots", but we are used to "aluminum ingots".It is produced by electrolysis with alumina - cryolite.There are two kinds of aluminum ingots after they enter into industrial application: cast aluminum alloy and deformed aluminum alloy.Casting aluminum and aluminum alloys are castings of aluminum produced by casting method;Deformable aluminium and aluminium alloys are manufactured by means of pressure processing: plates, belts, foils, tubes, rods, moulds, wires and forgings.According to the national standard, "aluminum ingots for remelting are divided into 8 grades according to chemical composition, namely Al99.90, Al99.85, Al99.70, Al99.60, Al99.50, Al99.00, al99.7e, al99.6e" (note: the number after Al is the aluminum content).
Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth. Introduction Aluminum is a silver-white metal that ranks third in the earth's crust after oxygen and silicon.Aluminum is less dense, only 34.61% of iron and 30.33% of copper, so it is also called light metal.Aluminum is the world's output and usage are second only to steel non-ferrous metals.The density of aluminium is only 2.7103g/cm3, about a third of that of steel, copper or brass.Because of its light weight, aluminum is often used in the manufacture of vehicles, trains, subways, ships, airplanes, rockets, airships and other land, sea and air vehicles to reduce the dead weight and increase the loading capacity. In our daily industrial raw materials called aluminum ingots, according to the national standard (GB/T 1196-2008) should be called "remelting with aluminum ingots", but we are used to "aluminum ingots".It is produced by electrolysis with alumina - cryolite.There are two kinds of aluminum ingots after they enter into industrial application: cast aluminum alloy and deformed aluminum alloy.Casting aluminum and aluminum alloys are castings of aluminum produced by casting method;Deformable aluminium and aluminium alloys are manufactured by means of pressure processing: plates, belts, foils, tubes, rods, moulds, wires and forgings.According to the national standard, "aluminum ingots for remelting are divided into 8 grades according to chemical composition, namely Al99.90, Al99.85, Al99.70, Al99.60, Al99.50, Al99.00, al99.7e, al99.6e" (note: the number after Al is the aluminum content).
Copper ingots 99.9999
We are one of the leading wholesale Aluminium Ingots manufacturers and suppliers. Our Aluminium Ingots are produced through a smelting process in which various shapes of ingots are produced, used in a wide range of industries. Aluminum Ingots processed further for utilization in automotive industry, household appliances and lightning. We value suggestions from our customers and accordingly we improvise our products to suit the requirements of our clients. Color : Metallic Surface Finishing : Polished Weight : 1-100kg Condition : New Purity : 99.99% Size : 20x3inch
Cadmium Ingot Introduction Cadmium and zinc are found in nature together.It is a good neutron-absorbing metal, made into rods that slow the rate of chain fission reactions in nuclear reactors, and Cadmium compounds useful in zn-cadmium batteries.Rare elements, symbol Cd.It's silver white.Melting point is 321 â??.The ratio of material to cadmium in the crust is 1000000:0.1 ~ 1000000:0.5.Cadmium Ingot is extracted from zinc ore or sulphur-cadmium ore as a by-product and is mostly used to protect other metals from corrosion and rust,� such as electroplated steel, iron products, copper, brass and other alloys.Another use is to make a bright yellow pigment called cadmium-yellow, which can be used in advanced paints and paints. use Used in the manufacture of alloys: as an alloy group, cadmium can be mixed into many alloys, such as hard copper alloys containing 0.5% ~ 1.0% cadmium, which have high tensile strength and wear resistance.Cadmium (98.65%) nickel (1.35%) alloys are used as bearing materials for aircraft engines.Cadmium is found in many low melting point alloys, with the famous wood fusible alloy containing 12.5% cadmium. Cadmium rods has a large thermal neutron capture cross section so alloys containing silver (80%) indium (15%) cadmium (5%) can be used as control rods for atomic reactors. Cadmium compounds have been� widely used in the manufacture of (yellow)� pigments, plastic stabilizers, phosphors, insecticides, fungicides, and paints.
Introduce corrosion-resistant Magnesium material is a new type of light and corrosion-resistant metal material developed in the 20th century. The application of magnesium is mainly� concentrated in the four fields of magnesium alloy production, aluminum alloy production, steel making and desulfurization, aviation and military industry. It is widely used in automobile manufacturing, light industry, metallurgical industry, chemical industry, electronic industry and instrument manufacturing. Use MAGNESIUM INGOT supplier has the advantages of low specific gravity, high strength per unit weight and high chemical stability, which makes aluminum magnesium alloy and its magnesium mold casting more and more popular.The application of magnesium alloy in automobile industry has the advantages of high strength, heat resistance, abrasion resistance and light weight, so that Magnesium Ingot gradually replaces the plastic products and steel parts with large proportion in automobile industry, mainly replaces the original engine, steering wheel, seat base and so on.The United States, for example, gm's "Polaris V - 8" engines have 15 pounds (6.8 kg) of magnesium die casting parts, and the engine assembly in Cadillac vehicles, the company annual production of 25000 ~ 30000 in the mid - 90 - this kind of car, one requires magnesium, gm's annual output has remained at more than 9 million vehicles, Japan's Toyota car production with gm, only for the two companies for the demand of magnesium alloy is enough to make metal magnesium production enterprise with excitement.
