Rubber Water Hose Working Pressure Range from 10 Bar To 12 Bar I.D Range From - 4 MM to 40 MM
We are manufacturers and exporters of forged pipe fittings like Sockets, Plugs, Elbows, Tee, Nipples, Unions etc in AS105 grade.
Reinforcement: One high tensile steel wire braids Cover: abrasion, ozone and weather resistant synthetic rubber, MSHA approved Temperature range: -40F to +212F (+248F max.) R1-S-04 - 1/4" SAE 100R1 Hydraulic Hose (per foot)
Cables buried directly with cables laid inside pipe conduits-30mm When the compression test stipulated by JIS C 3653 was conducted, the deformation ratio was less than 3.5% in all cases. When a 25-ton truck drove over a location where pipe as been buried at a depth of 30 cm from the ground surface, the deformation ratio was less than 3.5%, demonstrating sufficient resistance against loads
Range : 15 NB UP TO 100 NB IN 2000 LBS , 3000 LBS , 6000 LBS & 9000 LBS , 150 LBS , 250 LBS. Form : Socket Weld Fittings : Elbow 90 Deg , Cross , Tee , Elbow 45 Deg , Coupling , Half Coupling & End Cap. Carbon Steel: ASTM / ASME A105. ASTM / ASME A 350 LF 2 . Alloy Steel : ASTM / ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91
Range : 15 NB UP TO 100 NB IN 2000 LBS , 3000 LBS , 6000 LBS & 9000 LBS , 150 LBS , 250 LBS. Form : Socket Weld Fittings : Elbow 90 Deg , Cross , Tee , Elbow 45 Deg , Coupling , Half Coupling & End Cap. Nickel Alloy: ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ) ,UNS 4400 (MONEL 400 ) , , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 ( INCONEL 601 ) , UNS 6625 (INCONEL 625) , UNS 10276 ( HASTELLOY C 276 ) ASTM / ASME SB 160 UNS 2201 (NICKEL 201 ), ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 ). Copper Alloy: ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600. ASTM / ASME SB 151 UNS NO. 70600 , 71500 , C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30) , ASTM / ASME SB 152 UNS NO C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200
Grades :Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000 Types : Hastelloy Union Hastelloy Coupling Hastelloy Full Coupling Hastelloy Cross Hastelloy Forged Elbow Hastelloy Hex Nipple Hastelloy Plug Hastelloy Bushing Hastelloy Boss Hastelloy Insert Hastelloy Adapter Hastelloy Socket Hastelloy Forged Tee Hastelloy Olets Hastelloy Weldolet Hastelloy Sockolet Hastelloy Elbowlet Hastelloy Thredolet Hastelloy Nipolet Hastelloy Latrolet Hastelloy Sweepolet Hastelloy Half Coupling
Grades :Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 Standard :ASTM / ASME SB 564 Types : Elbow - 90 Deg. & 45 Deg Tee - Equal & Reducing Union, Cross, Coupling - Full & Half Socket Reducing, CAP, Plug-Hex & Square, Nipples (Hex/Reducing), Bushing, Sockolet, Weldolet, Thredolet, Elbolet, Nipolet
Grades : Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS Types : Union Coupling Full Coupling Cross Forged Elbow Hex Nipple Plug Bushing Boss Insert Adapter Socketv Forged Tee Olets Weldolet Sockolet Elbowlet Thredolet Nipolet Latrolet Sweepolet Half Coupling
Grades : Monel 400, Monel k500 Types : Elbows, Equal/Unequal Tees, Concentric/Eccentric Reducers, Full/Half Couplings, Reducing Couplings, Caps, Cross, Unions, Hex/Reducing/Flash Bushings, Plugs, Nipples, Swage Nipples, Reducer Inserts, Boss, Laterals Street Elbows & Outlets/Branch Connections (Weldolets, Thredolets, Sockolets, Flexolets, Latrolets, Elbolets, Sweepolets, Insert Weldolets, Nippolets, Brazolets, Coupolets)
Grades : Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23 Range : 15 NB up to 1500 NB in 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS available with NACE MR 01-75 Standard : ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE Types : Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectacle, Ring Joint Features: Dimensional accuracy High strength Durability Corrosion resistance Excellent finish
Grades :Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000 Standards :ASTM / ASME SB 336 & XXS Types :Bend (Long & Short) Elbow (180 Deg., 90 Deg. & 45 Deg.) Tee (Equal & Unequal) Reducer (Concentric & Eccentric) CAP, Stub end (Long &Short) Nipple (Barrel)
Grades : Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 Range :15 NB UP TO 600 NB IN SCH 5S, 10S,10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS Types :Elbow 90 Deg, Elbow 45 Deg, Elbow 180 Deg, long/short radius elbows, equal/unequal tees, concentric/eccentric reducers, caps, crosses, short/long neck stub-ends
Grades : Incoloy 800, incoloy 825, Incoloy 925, Incoloy a-286, Incoloy DS Standards : ASTM B366 Types : Bend (Long & Short) Elbow (180 Deg., 90 Deg. & 45 Deg.) Tee (Equal & Unequal) Reducer (Concentric & Eccentric) CAP, Stub end (Long &Short) Nipple (Barrel)
Grades : Monel 400, Monel k500 Range : 1/2" NB to 36" NB Types : long/short radius elbows, equal/unequal tees, concentric/eccentric reducers, caps, cross, short/long neck stub-ends,
Grades : Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23 Titanium Buttweld Pipe FittingsRange :15 NB To 600 NB in Sch.:5,10,20,40,80,120,160,XS, XXS. Types : Bend (Long & Short) Elbow (180 Deg., 90 Deg. & 45 Deg.) Tee (Equal & Unequal) Reducer (Concentric & Eccentric) CAP, Stub end (Long & Short) Nipple (Barrel)
Price : 450.00 / Kilogram MOQ : 1000 Piece(s) Business Type : Manufacturer, Exporter, Supplier, Retailer Material : Brass Diameter : Customize Color : Golden Preferred Buyer From Location : Worldwide Product Details Technics : Molding Features : Anti Sealant, Durable, Heat Resistance, Rust Proof Quality : Optimum Quality
Use: it is widely used in the production of concrete vibrators, flexible shaft pumps, various kinds of power tools and all non-lineal transmission tools. It is designed to protect the flexible shaft inside from damage and wear in revolution. Constructionï¼? Flexible hose is made of multi-layer materials. From outside to inside the materials consist of winding steel straps(made of cold rollled steel straps), rubber(winding straps are applied with a thin layer of strong rubber), canvas(the winding steel straps are wrapped with a layer of canvas), rubber(extruders add an even layer of sythetic rubber on the surface of canvas), braided steel wire(one layer or two steel wire are to be made out of the synthetic rubber with braiding machines), rubber(extruders add one even layer of synthetic rubber)
Polyethylene pipes from size 16mm to 450mm
we could supply spiral welding perforated pipe and straight welding perforated pipe. The pipes can be customized according to buyer's request, including diameter, length, wall thickness, hole size and opening area.
