3.7v 200mah li polymer battery pack Integrated with protection circuit module Lead out 3 wires with connector
We are developing and producing all kinds of industrial battery packs (nimh, nicd, li-ion and li-polymer), we are also willing to provide you the chargers along with the packs Carton box
Place of Origin: Dongguan, Guangdong, China (Mainland) Brand Name: Sum Model Number: 853472-2S Size: 8.5*34*74mm Battery Type: Lithium Polymer Battery Nominal Voltage: 7.4V Charge Voltage: 8.4V Load Voltage: 8.4V Charge Current: 1.4A Nominal Capacity: 2600mAh Minimum Capacity: 2600mAh Internal Resistance: 80m © Suitable Type: Standby Power Supplier Usage: Various high capacity, ultra-long standby, high energy consumption battery equipment 100% quality assurance: No leakage, no deformation, no rust, no stain. Color: Picture(OEM Support) Jacket: Aluminum Foil Jacket Factory: Yes/ 12 years Packing: 2pcs/4pcs/Blister Card Pack or shrink pack Certificates: CE, ROHS, UL,FCC,FC,IEC62133,CQC,UN38.3,MSDS. Shelf Life Warranty: 5 years OEM: Welcomed Supply Ability: 100000000 Piece/Pieces per Day For Special Alkaline Battery may need more days Packaging Details: Battery Packed by Carton Port: Shenzhen Lead Time : Delivery within 2 days Temperature: -40 - 80 Feature: Safety, high capacity, and cost-effective. Non-pollution, No need special handling. With Leaking-proof protection. Chemistry composition: Anode: MnO2, Cathode: Mercury-free zinc powders, Electrolyte: KOH It has high capacity, High power, high-cost performance and Good discharge performance under low temperature, it can be sued in the -20 New green energy of environmental protection 0% Mercury/ 0% Lead 0% Cadmium Technical standard: GB/T8897.2-2013
Place of Origin: Dongguan, Guangdong, China (Mainland) Brand Name: Sum Model Number: 654055 Size: 6.5*40*55mm Battery Type: Lithium Polymer Batter Nominal Voltage: 3.7V Charge Voltage: 4.2V Load Voltage: 4.2V Charge Current: 1.4A Nominal Capacity: 1500mAh Minimum Capacity: 1500mAh Suitable Type: Standby Power Supplier Usage: Various high capacity, ultra-long standby, high energy consumption battery equipment 100% quality assurance: No leakage, no deformation, no rust, no stain. Color: Picture(OEM Support) Jacket: Aluminum Foil Jacket Factory: Yes/ 12 years Packing: 2pcs/4pcs/Blister Card Pack or shrink pack Certificates: CE, ROHS, UL,FCC,FC,IEC62133,CQC,UN38.3,MSDS. Shelf Life Warranty: 5 years OEM: Welcomed Supply Ability: 100000000 Piece/Pieces per Day For Special Alkaline Battery may need more days Packaging Details: Battery Packed by Carton Port: Shenzhen Lead Time : Delivery within 2 days Temperature: -40 - 80 Feature: Safety, high capacity, and cost-effective. Non-pollution, No need special handling. With Leaking-proof protection. Chemistry composition: Anode: MnO2, Cathode: Mercury-free zinc powders, Electrolyte: KOH It has high capacity, High power, high-cost performance and Good discharge performance under low temperature, it can be sued in the -20 New green energy of environmental protection 0% Mercury/ 0% Lead 0% Cadmium Technical standard: GB/T8897.2-2013
Overview Place of Origin: Dongguan City, Guangdong Province, China (Mainland) Brand Name: Sum Name: 763688-2P Lithium Polymer Battery Type: 763688-2P Dimension: 16*36*90 mm Nominal Capacity: 6000mAh Minimum Capacity: 6000mAh Nominal Voltage: 3.7V Load Voltage: 3.7V Charge Voltage: 4.2V Charge Current: 1.4A Internal Resistance: �45mΩ Life Cycle: 500 times Suitable Type: Standby Power Supplier. Terminals: Various High capacity, ultra-long standby, high energy consumption battery equipment. Certification: UN38.3, CE, ROHS, UL, FCC, FC, IEC62133, CQC, UN38.3, MSDS. Supply Ability: 10000000 Piece/Pieces per Month Packaging Details: Blister card or bulk package Port: Shenzhen Payment: Western Union, PayPal, T/T Warranty: 12months Lead Time : Sample 7-15 days, Quantity order 20-25days Delivery Time: 7-10 days after confirm the order Storage Temperature: -20 - 60 Operation Temperature: -40 - 80 Feature: Safety, high capacity, and cost-effective. Non-pollution, No need special handling. With Leaking-proof protection. Chemistry composition: Anode: MnO2, Cathode: Mercury-free zinc powders, Electrolyte: KOH It has high capacity, High power, high cost performance and Good discharge performance under low temperature, it can be sued in the -20 New green energy of environmental protection 0% Mercury/ 0% Lead 0% Cadmium Technical standard: GB/T8897.2-2013
Place of Origin: Dongguan, Guangdong, China (Mainland) Brand Name: Sum Model Number: 801528 Size: 8*15*28 mm Battery Type: High Rate Lithium Polymer Battery Nominal Voltage: 3.7V Charge Voltage: 4.2V Charge Current: 1.4A Nominal Capacity: 220mAh Minimum Capacity: 220mAh Suitable Type: Standby Power Supplier Usage: Various high capacity, ultra-long standby, high energy consumption battery equipment 100% quality assurance: No leakage, no deformation, no rust, no stain. Color: Picture(OEM Support) Jacket: Aluminum Foil Jacket Factory: Yes/ 12 years Packing: 2pcs/4pcs/Blister Card Pack or shrink pack Certificates: CE� ROHS� UL�FCC�FC�IEC62133�CQC�UN38.3�MSDS. Shelf Life Warranty: 5 years OEM: Welcomed Supply Ability: 100000000 Piece/Pieces per Day For Special Alkaline Battery may need more days Packaging Details: Battery Packed by Carton Port: Shenzhen Lead Time : Delivery within 2 days Temperature: -40 - 80 Feature: Safety, high capacity, and cost-effective. Non-pollution, No need special handling. With Leaking-proof protection. Chemistry composition: Anode: MnO2, Cathode: Mercury-free zinc powders, Electrolyte: KOH It has high capacity, High power, high-cost performance and Good discharge performance under low temperature, it can be sued in the -20 New green energy of environmental protection 0% Mercury/ 0% Lead 0% Cadmium Technical standard: GB/T8897.2-2013
Lithium Battery Lithium Cell Model Li-Polymer Battery 18650 lion battery Voltage of single cell of lithium polymer battery is 3.7V, but Ni-MH and Ni-Cd is only 1.2V, which means one lithium battery cell could replace three Ni-MH or Ni-Cd cells. Therefore, lithium battery pack has much smaller size than Ni-MH and Ni-Cd battery pack. Self-discharge rate of lithium battery is 5% per month, which is much lower than Ni-MH and Ni-Cd (25% per month). Lithium battery has around 800 times of cycle life, which is also longer than Ni-MH and Ni-Cd(500 times). So lithium battery is replacing Ni-MH and Ni-Cd in more and more fields.
Model: 12.6V 3A Li-ion battery charger Input: 100V~240V, 50~60Hz, 1.6A (Works Worldwide) Output: 12.6V 3A Power Cord/DC: US/EU/UK/AU DC5.5*2.5mm/5.5*2.1mm/XRL/3PIN and more Outlet: 2/3 Prong Size: 88mm x 34mm x27mm (L x W x H) Packing: Brown box( 50pcs/ctn); 49*39*34CM(L x W x H) for master carton size Material for PCB & Housing: ABS+PC+Fireproofing material Delivery Date: Within 2-3 working days after confirm the payment Warranty: 12 months Approved: CE,FCC,RoHS, SAA, PSE Protection: SCP,OVP,OCP,OTP Test: Temperature test; Vibration test; Drop-Test;Over charging and discharging test Line Regulation: +/-5% Load Regulation +/-5% Normal Operating Temperature and Humidity: Operating Temperature: 0°C to 45°C Humidity: 10% to 90%RH Packaging 50/pcs Carton
Characteristic of 2200mAh Li-ion cylindrical battery Without special instructions, the following tests should be done under the condition of : temperature(23±3), atmospheric pressure (86KPaï½?106KPa), relative humidity (45%ï½?85%), and the tests should be done within two weeks after receiving the products. the definitions of some nomenclatures of this specification standard Charge: Charge with current 0.2C5A to limit charge voltage under the condition of23±3 surrounding temperature, then change to charge with constant voltage till the current less than or equal to 0.02C5A. Electrical Characteristic for Cylindrical Rechargeable Electric vehicle li-ion Battery NO. Item Standard Test Method 1 Discharge rate capabilities Aï¼?1 C5A â?¥97% Bï¼?5 C5A â?¥95% Standard charged under the condition of normal atmospheric pressure and the environmental temperature of 23±3 and45%ï½?85%RH, then rest for 30mins and discharge at1C5Aã??5 C5Aã??10 C5A to the discharge cut-off voltage respectively. Charge/discharge cycle can be conducted for 3times before meeting the Standardsï¼?the same belowï¼? 2 capacity retention and recovery Residualcapacityâ?¥94 % Recoverablecapacityâ?¥*98% Standard charged under the condition of normal atmospheric pressure and the environmental temperature of 23±3ï¼? Stored for 28 days, then discharge at 0.2 C5A to 2.50Vmeasuring residual capacity; Then standard charge/discharge measure recoverable capacity. 3 Low TemperaturePerformance discharge capacityâ?¥85% rated capacityno distortion and no rupture The cell shall be charged in accordance with the standard charge. Then stored in the temperature of -10±1 for4h, Discharge at the constant current of 0.2C5A down to the end-of-discharge voltage 2.750V. 4 Cycle Life Charge: The cell shall be charged in accordance with RapidCharge condition. rest for 10mins.Discharge : 5C5A discharge to 2.75V, one cycle is finished, then rest for 30mins. Then repeat above steps, when capacity is less than 80% of initial capacity, the battery life is over.
7.4v 2300mah li ion battery pack with plastic housing; Integrated with protection circuit module; Integrated with gas gauge ic; Output: positive, negative, 10k ntc
Lifepo4 li-ion 26650 3000mah 3.2v Capacity 3000mah, volt 3.2v. Dimension: diameter 26.5mm, high 65.0mm. Charge current 600-1500ma. Discharge current 600-6000ma. Vc/vv more than 92%. The capacity 0.5c discharge to 3.0v more than 95%. Cycle life more than 2000 times, environment friendly. Features: *long cycle life ( more than 2000 cycles) *high safety & never explode *high-temperature working capability *high rate discharge current *no memory effect *low self discharge *environmental friendly Application: *communication: back-up electric supply, interphone *vehicles: electric bicycle, golf car, electric wheelchair *power tools: electric cropper, electric drill, electric saw, electric hammer. *illuminate devices: solar battery, miner lamp, solar street lamp, emergency light, electric torch. *others: toy, small home appliance. Features: *long cycle life ( more than 100 times ) *light weight *high capacity *high voltage *high safety *environmental friendly Application: *electric model airplane *electric model car *electric model boat *electric robot
Battery cell: 18650 Capacity: 2500mAH Voltage: 3.7V Current: 2AH
Powder Glue, construction adhesive heat resistant tile adhesive Porcelain Tile Adhesive is also known as the ceramic tile or ceramic tile adhesive glue, points type, polymer type, heavy brick, is a newly developed products, mainly used for stickup ceramic tile, brick, tile and other decorative materials, widely used in internal and external walls, floor, bathroom, kitchen, and other places of building the veneer of decoration. 1.Product Description: Product Name : BE GOOD Strong Adhesion� Tile Adhesive Type : Strong Adhesion Type Color : Grey / White Package : 20kg/bag Application : Tile Adhesive Reference Usage : 2-5kg/ m Mixing Ratio Powder : Water = 20kg : 5 liters Pot Life : 4 hours Application Temperature : 5 - 40 Packaging Details: 20kg/bag / 72bags/pallet / 20pallets/20GP /1360 bags/1*20GP Payment: TT Delivery date: 10 to 15 working days. Original country: China 2. Features 1) Strong adhesion and elasticity. 2) Pasting layer is thin and even, and hardly with hollowness. 3) Easy and simple application, no need to pre-moisturize the bricks and walls. 4) Excellent waterproofing performance. Adoption of scraper method will speed up the tiling. 3. Application Range 1) Suitable for interior and exterior use.� 2) Suitable for substrate made from concrete, masonry, pre-cast material and lightweight brick. 3) Suitable for walls, floors and roofs of architects, such as tunnels, bridges, basement, kitchen, bathroom, balcony, swimming pool and reservoir and so on. 4) Suitable for architects with structure which might easily vibrate and split, such� as post-cast strip, pipe orifice.
Lithium iron phosphate battery is a kind of lithium ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self-discharge rate and no memory effect. Pustun lithium iron phosphate battery is your best power choice for energy storage system of solar street light. This LFP series battery is specifically designed for solar street light application, which has more than 10 years service life; LFP series batteries are the best choice for the durable, safe, environment-friendly energy solution and they can be customized according to your requirement, such as dimension, voltage, capacity of battery. With an increased lifespan, this battery can save you much cost against frequent battery replacement. The working life of lithium battery especially under the outdoor high temperature environment is five times longer than the traditional lead acid battery.
Lithium iron phosphate battery is a kind of lithium ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. It has the advantages of high working voltage, high energy density, long cycle life, good safety performance, low self-discharge rate and no memory effect. Pustun lithium iron phosphate battery is your best power choice for energy storage system of solar street light. This LFP series battery is specifically designed for solar street light application, which has more than 10 years service life; LFP series batteries are the best choice for the durable, safe, environment-friendly energy solution and they can be customized according to your requirement, such as dimension, voltage, capacity of battery. With an increased lifespan, this battery can save you much cost against frequent battery replacement. The working life of lithium battery especially under the outdoor high temperature environment is five times longer than the traditional lead acid battery.
Model : uv light Power : 2w Power supply : usb 5v Size: 357*40*35mm Wave length : 275+395nm Lamp beads : uv3535 6v 2w Life span: 8000h Color: black /white Li-battery : 1800ma Sterilization time : cm height 10-20 seconds
LiFePO4 Solar Lithium Battery 51.2V 200ah for Solar Storage Ultra-reliable Lithium Iron Phosphate (LiFePO4) technology Integrated battery management System (BMS) Ultra-long cycle life Light weight & compact 1/3 Weight of Lead Acid Water & dust resistant (IP56) Highly durable ABS enclosure Drop-in lead acid replacement Environment friendly: -20�ºC~60�ºC Bluetooth App is optional Built in BMS overall protection 1.Over charged protection 2.Over discharged protection 3.Thermal protection 4.Over current protection 5.Cell balancing
80mm Portable BT thermal receipt and label printer support android IOS for mobile printing applications, After-sales Service: Return and Replacement, Others, Call Center and on-line Technical Support Driver program: WinAndroid/iOS/MacOS/Linux Barcode Type: UPC-A/UPC-E/JAN13(EAN13)/JAN8(EAN8)CODE39/ITF/CODABAR/CODE93/CODE128 QR Code: PDF-417/Data Matrix/QR code Memory: 4MB Flash Memory Instruction Set: CPCL OR ESCPOS NV Flash: 256k bytes Print Media: Continuous Paper/Black Label Paper/Label Paper Dielectric Width: 50mm/80mm Battery: 7.4v/2000mAh Li-Battery Print Life: 150KM Certification: ce, RoHS, CCC
Product Description Item: 20S50Ah-PC01-A Voltage: 60v Capacity: 50ah Discharge current: 50A cell: 32700 cylinder, Grade A, real capacity, Life cycle is more than 2500 times Communication: RS485, RS232, CAN
Model No.-18650 Voltage(V)-3.7 Battery Capacity-2200mAh Short Circuit Protection-Yes OverCharge/Discharge Protection-Yes Disposable-Yes Rechargable-Yes Dimensions (DiaxH) (mm)-18.4x65 Make-SES Weight(kg)-0.045000 color-Green Description- Li-ion 3.7v 2200mAH 18650 1S battery with BMS Applications:- Audio Visual equipment cellular phones office automation notebook PC's PDA and handy terminal
