Apply to building trade such as various stove kilns and bridge, tunnel, expressway in industrial fields such as the metallurgy, cement, petroleum, chemical industry, pottery,etc.. The products are sold to areas such as all parts of the country, Southeast Asia and America and Europe,etc., approving by the masses of users and favorable comment. . 25MM---50MM
Stainless steel anchors 20kg
Fiber felt Sintered Fiber Felt is produced from non-woven fiber media which are compressed together and sintered at the elevated temperature to produce metallic fiber felt media. * Material: Stainless Steel wire 304 316 316L and FeCrAl, 310S, Monel, Hastelloy,Inconel, nickel, titanium or as per request... * Filtration precision Micron size:3-100micron * Layers:1 2 3 layers or customized * Sizes of Sintered stainless steel mesh:500x1000mm, 600x1200mm, 1000x1000mm, 1200x1200mm etc * Shape: a plate square, round, ad rectangle ... * Contructure of sinterede mesh screen: Protective Layer, Control Layer, Dispersion Layer and Reinforcing Layer. * Features: ----High Temperature resistance ---Corrosion Resistance ---High Filtering Efficiency ---Metallic capacities, such as noise reduction,hot resistance,heat conduction,high strength and etc ---Long working lifetime
Steel fiber has good tensile strength, strong grip strength and high hardness.If steel fiber is mixed in castable, the steel fiber castable products produced by this method are not only used, wear resistant, tensile and compressive, but also have a good anti-theft effect.And its adaptability and operational planning will be wider.It can be used at different temperatures.Greatly improved product utilization rate.So now large kilns, melting furnaces and so on will mostly choose steel fiber castable.Is to travel the quality of the product and use of life, compared to down, such a product more affordable. Steel fiber castable can reduce the shrinkage of castable during curing, grilling and high-temperature use. After adding steel fiber, not only the toughness of castable can be improved, but also the impact and mechanical strength of the machine can be improved.After adding steel fiber, the thermal shock performance of castable is improved.The steel fiber castable prevents fracture or spalling by preventing microcrack and mechanical stress. Steel fiber castable is widely used in high temperature vulnerable parts of metallurgy, building materials and circulating fluidized bed boilers.As follows: according to the classification of the material, it is suitable for planning the corundum quality before and after the steel fiber reinforced castable first used in large cement kiln kiln and other industrial kiln lining, high aluminum and corundum mullite stone steel fiber reinforced refractory castable first used in the cement kiln kiln mouth, wicket cover, before and after cooling machine in high temperature resistant parts and other industrial kiln liner.
Steel fiber has good tensile strength, strong grip strength and high hardness.If steel fiber is mixed in castable, the steel fiber castable products produced by this method are not only used, wear resistant, tensile and compressive, but also have a good anti-theft effect.And its adaptability and operational planning will be wider.It can be used at different temperatures.Greatly improved product utilization rate.So now large kilns, melting furnaces and so on will mostly choose steel fiber castable.Is to travel the quality of the product and use of life, compared to down, such a product more affordable. Steel fiber castable can reduce the shrinkage of castable during curing, grilling and high-temperature use. After adding steel fiber, not only the toughness of castable can be improved, but also the impact and mechanical strength of the machine can be improved.After adding steel fiber, the thermal shock performance of castable is improved.The steel fiber castable prevents fracture or spalling by preventing microcrack and mechanical stress. Steel fiber castable is widely used in high temperature vulnerable parts of metallurgy, building materials and circulating fluidized bed boilers.As follows: according to the classification of the material, it is suitable for planning the corundum quality before and after the steel fiber reinforced castable first used in large cement kiln kiln and other industrial kiln lining, high aluminum and corundum mullite stone steel fiber reinforced refractory castable first used in the cement kiln kiln mouth, wicket cover, before and after cooling machine in high temperature resistant parts and other industrial kiln liner.
Sintered stainless steel fiber felt is a filtration medium made from extremely fine stainless steel fibers, which are micron-sized in diameter. The manufacturing process involves non-woven fabrication, lamination, and high-temperature sintering. This results in a finished felt with a gradient of different pore size layers, allowing for precise control of filtration accuracy and enhanced pollution absorption. The three-dimensional network structure, porous nature, high porosity, large surface area, and uniform pore size distribution of the sintered fiber felt enable continuous filtration performance. The sintered stainless steel fiber felt overcomes the drawbacks of metal mesh clogging and the fragility of powder filter products. It compensates for the limitations of fragile structures and low flow rates, which are common in filter paper and filter cloth materials. Moreover, it exhibits excellent heat resistance, compression resistance, corrosion resistance, and high filtration precision, making it an ideal choice for demanding applications. Specifications: - Material: Stainless steel fiber - Filtration rating: 99% - Filtration precision: 5-60 microns - Dimensions: 300x300mm - Thickness: 0.4mm, 0.8mm, 1.0mm - Porosity: 70% - 80% Features: 1. Low-pressure drop: The high porosity of our sintered metal fiber filtration media ensures minimal pressure drop, resulting in energy cost savings even at high filtration rates. 2. Easy to clean: The open structure of the stainless steel fiber porous media allows for easy backflushing or backpulsing, minimizing downtime and optimizing process efficiency. 3. High strength: The sintering process creates strong fiber bonding, ensuring a durable filtration medium capable of withstanding thermal shock, high pressure, and frequent backflushing when paired with appropriate core materials. 4. Heat and corrosion resistance: Our stainless steel fiber filter medium can withstand high temperatures (up to 1000°C, depending on the alloy) and corrosive environments.
Mullite Steel Fiber Reinforced Refractory Castable is made from high quality synthetic mullite aggregate, high temperature filler, ultrafine powder and high temperature binder combination, with high temperature structure strength, high temperature Low creep rate, low coefficient of thermal expansion, anti-peeling, strong corrosion resistance, quick release, anti-burst, thermal shock stability and other advantages, successfully used in cement kiln before and after the kiln, industrial kiln lining, Ditch cover lining and other projects, the effect is outstanding.
Mullite Steel Fiber Reinforced Refractory Castable is made from high quality synthetic mullite aggregate, high temperature filler, ultrafine powder and high temperature binder combination, with high temperature structure strength, high temperature Low creep rate, low coefficient of thermal expansion, anti-peeling, strong corrosion resistance, quick release, anti-burst, thermal shock stability and other advantages, successfully used in cement kiln before and after the kiln, industrial kiln lining, Ditch cover lining and other projects, the effect is outstanding.
Chopped steel wools are used in brake pad and clutch of automobile, motorcycle, locomotive and airplane as raw material with excellent properties of stability, low wear rate and good heat dissipation. So far, no substitute has been found to match its properties. 1. Specification D0-160, D1-80, AD1-80, 1-80, 3L-80, 3-60, Q4-80 2. Packing They are packed in bags made of two layers of paper and a piece of plastic film. 25kg/bag, 40 bags per pallet, and 20 metric tons per 20ft container. We also pack the products according to your requirement. 3. Chemical Composition (%) C Si Mn S P 0.07-0.12 0.07MAX 0.8-1.25 0.03MAX 0.03MAX. They are packed in bags made of two layers of paper and a piece of plastic film. 25kg/bag, 40 bags per pallet, and 20 metric tons per 20ft container. We also pack the products according to your requirement.
3mm 6mm 100% Virgin New PP Material Staple Monofilament Polypropylene Fiber 0086-13915721168 Product number: PP Micro fiber Equivalent diameter: 15-48 um Elastic Modulus: â?¥3500 M�·pa Breaking strength: â?¥ 560 M�·Pa melting point: 160-180�°C proportion: 0.91-0.93 g/cm�³ length: 3-20mm (as custom requirement) Acid and alkali resistance (strong retention rate) â?¥96% 1. PP pressed Woven Bag 2. 300-350kg/ bale 3. About 9-10Tons / 20'FCL 4. About 21-22Tons / 40'FCL
Wire Diameter: 0.025mm-4.0mm Material Type: 302, 304, 304L, 316, 316L, etc. Packaging: Plastic cylindrical spool Weight: 5kg to 15kg wire per spool Applications: Used for wire weaving, the production of metal hose, spring wire and binding wire, etc. Plastic cylindrical spool and plywood box.
1. Feature Bow shape in cross section, it looks like ripple outside. 2. Specification Lengths of current products are 25mm, 30mm, 35mm, 38mm, 40mm, 50mm. Width is 2.0-2.6mm, thickness is 0.4-0.6mm, wave length is 6-7mm, wave height is 2mm��0.2. We can produce the products according to customer's requirements. 3. Usage The projects blending the ripple steel fibre with concrete in a certain ratio will evidently strengthen bending resistance, stretching resistance, abrasion resistance and pressure resistance. It is widely used in highway, bridge, tunnel, airport runway, basic structure construction of tall building, as well as shock resistance structure and high temperature kiln stove construction. 4. Technical parameter Tensile strength: >750MPa They are packed in bags made of two layers of paper and a piece of plastic film. 25kg/bag, 40 bags per pallet, and 20 metric tons per 20ft container. we also pack the products according to your requirement.
ES fiber is a sheath-core composite fiber obtained by successfully combining low-melting components and high-melting components on a single fiber. It has excellent thermal bonding properties. The low melting point component in ES fiber melts under heat treatment conditions higher than its melting point, and bond with other materials to form a binder-free environmentally and friendly non-woven fabric. ES fiber has various advantages such as soft, fluffy, low-temperature processing, heat-bonding, plasticity, non-toxic, non-irritating, and lightweight. It is mainly used to manufacture high-quality sanitary products such as sanitary napkins and diapers. And it is also high-quality materials used to make medical products such as medical protective cloth and medical protective masks, and so on. There are two main types of ES fibers. The first kind is a composite of PE and PP. Its sheath layer is PE (polyethylene, melting point 130�°C), and its core layer is PP (polypropylene, melting point 165�°C). The second kind is a composite of PE and PE. Its sheath layer is PE, and the core layer is PET (polyester, melting point 255â??), which is an upgraded version of PE/PP. ES is divided into EP and ET in terms of material and functionally divided into the hydrophilic, water-repellent, hydrophilic, and weak parent, single parent, multi-parent.In addition, it also can be divided into whitening, general whitening, high holding, medium holding, and low holding. The specifications are 1.5D38mm, 2D38mm, 4D51mm, and so on. In the future, the trend will gradually develop towards fine deniers. SPECIFICATION: PE+PET ES Fiber: Optical White & Super Hydrophile 2D*38mm, Optical White & Hydrophile 2D*38mmï¼? Optical White & Water Repellency 2D*38mmï¼? RAW White & Water Repellency 2D*38mmï¼? Optical White & Super Hydrophile 1.5D*38mmï¼? Optical White & Water Repellency 1.5D*38mmï¼? RAW White & Water Repellency 1.5D*38mï¼? Hydrophile 2D*38mmï¼? Water Repellency 2D*38mm PE+PP ES Fiber: Hydrophile (P2Q) 2D*38mm
Fiber Laser Marking Machine Description: Fiber laser marking machine designed to easy-move equipment, air-cooling, compact machine, Perfect output beam quality, high reliability, no consumables, maintenance-free. Long life Working. Import Germany IPG fiber laser, the international latest, most reliable structure, small size, power consumption is small, no high-voltage without large water-cooled system. Close to the ideal beam, USB interface, output control, optical scanning system, laser repetition rate high, high-speed without distortion. Features: 1. Fiber laser(German IPG brand or China fiber laser optional) 2.High speed galvo scanner(import or china brand optional) 3.No maintenance laser source: servicetime 100,000 hours. 4. Higher precision,faster speed 5. Small size,low power consumption 6. Red light preview:show the marking position before lasering 7. Notebook with Powerful software 8. User friendly interface, easy operation Application Field Mobile phone keypads, non-opaque-plastic keypads, electronic components, integrated circuits (IC), electrical appliances, communication products, sanitary wares, tool accessories, cutters, watches, glasses, jewelry, auto parts, boxes, bags, clasps, cookers, stainless steel products, etc. Type specification CS-F10 CS-F20 CS-F30 CS-F50 Wave length of laser 1064nm Laser repetition frequency 20kHz~100kHz Laser power 10W 20W 30W 50W Marking scope 70*70 /100*100 /200*200mm/300*300mm Laser sources Fiber module Laser Head Scanning head The minimum focus facula diameter 20µm Minimal character 0.01mm Marking speed =7000mm/s Repeated accuracy 0.0025mm Cooling ways Force-air Cooling Power supply 220V/ 50Hz/2kVA Process Material All kinds of metal and part of Non-metal Materials Support format PLT, BMP, DXF, JPG, TIF, AI etc Package Standard Crate for export