High flexibility, fit all kinds of roofing. Covenient installation and transportation, saving a lot of costs. Lead-free environmental protection, green photovoltaic concept. Lightweight ultra-thin design to meet project needs. It can be customized to meet various scenarios. High reliability in harsh environment testing.
5 kva off and on grid max efficiency to 98% wide input voltage range high efficient MPPT lcd display small and light easy to install
solar tube light for outdoor lightings Solar street light for road lighting 7-8meter pole
Product Description 1 power supply: solar cell (monocrystalline) 2.5V/120MA 2 energy storage devices: rechargeable battery NI-MH 1.2V/800MAH high temperature battery 3 working hours: Full recharging for 8hours and working in 120hours constantly 4 Load capacity :over 20T 5 led: Ï?5 Ultra bright LED 4pcs 6 working mode: flashing (2Hz + 20%) and constant 7 rev control light intensity: positive light is less than 500Lux 8 visual distance: over 500 meters 9 service life: 3 years Product Feature 1 solar power supply, energy saving and environmental protection, convenient installation, working mode automatically start lighting at night Two, installation method 1 installed on both sides of the road, pay attention to whether spike solar panels can be sunlight 2 installation useful glue and nail spike installed by spike Product Specification Working time: 120 hours after charged full Battery life time: more than 3 years Product Size: 105*105*25MM Carton size: 40x27.5x28cm Qty/CTN: 60pcs Application 1. Dangerous blind corners and sharp-curves, black spots and poorly lit areas. 2. Areas with unpredictable weather conditions (coastal roads, foggy areas, wet and rainy regions, etc.). 3. Joint intersections, on and off ramps, center lines and dividers, entrance warnings, carpool lanes, bridges, cross and side walks 4. Guidance lines, traffic islands, roundabouts and mountain roads.oad 5. Taxiways at airports, bike and pedestrian lanes, aboard ships and watercrafts. Other Information 1.10 years solar charger & light Manufacturer. 2.High Quality Control with CE, ROHS approval.
Caution solar light Caution solar light as-r02, anti impacting lighting Low energy consumption, mini size, life expectancy over 5 years No switch, no electrostatic, no noise Caution solar lights application Communication, utility grid, power generation, power plant High dangerous fields such as oil storeroom and chemical Bridge, high way, railway Transportation and trucks Hydrology, water conservancy, reservoir Fishery, breed aquatics, shipping and boating , docks Building site, tower crane, some operation equipments in the field Large-scale entertainment, establishment, entertainment location and large- scale manual scene Building appearance, decorative and advertisement Application---the safeguard of dangerous road sections 1.Early warning at special highway condition Highway special section+¼ ++bend road, alpine road +¼road section with sharp turnings +¼wide road to narrow road ++service and experimental road sections ++road sections with accident ahead +-special road condition ahead (cave, bridge etc) 2.Emergency caution in special weather Special weather and climate features at superhighway: (1) thunder storm (2) snowy (3) foggy 3.Safety means (1) flash in advance to create precaution effect (2) stronger light for warning emphasis (3) color warning to avoid blind spot (4) change from active illumination to negative illumination under the dynamo to avoid dazzling of light in near distance. (5) function of bump proof (6) light with strong penetrability for warning emphasis (7) night decoration 4.Application fearures (1) adopt solar energy without the difficulty of leading electric wire. (2) life expectancy over 5 years at temperature -40f¬~++60f¬. (3) no electric shock possibility, no fire hidden danger, ecological environment protection. (4) convenient installation, maintenance free. (5) auto shift day and night with continuous working time of over 60 hours Dia:83.6 x 20.5mm Net weight: 75g
Integrated solar panel, Li battery, LED lamp, solar controller and PIRsensor.Solar panel converts solar into electricity and stores in Li battery via controller. PIR sensor can save energy.General SpecsSpecificationsCESC-AIO6-20WCESC-AIO6-24WCESC-AIO6-30WCESC-AIO6-40WLED LampRated Power20w24w30w40wLED ChipEpistar/BridgeluxColor Temperature30006500KLamp Efficiency90 Lumens/WFixture MaterialAluminium alloyLithium Battery20AH/12V24AH/12V30AH/12V40AH/12VSensor Height(Optional)120°DEetection angle, 8 meter detection heightWorking ModeA: Light switch-on &time switch-off, 4-period Energy Saving Mode availableB: Energy saving modeWhen nobody around the light, It works at 25% power.the motion sensor detects it and the light will be full power lighting.Discharging Time� 30 hoursAmbient Temperature-1060°Lamp AdaptorDiameter 60mmIP GradeIP65Suggested Mounting Height45Mt45Mt56Mt67MtProduct Size580*260*85mmApplicationsSolar street lighting, solar roadway lighting, solar pathway lighting, solar ramp lighting, solar Sidewalk Lighting, Private Road Lighting, Farm & Ranch Lighting, Wildlife Area Lighting, Perimeter Security Lighting, Park Lighting, Gate Lighting, Yard Lighting, Fence Lighting, Campus Lighting, Boat Dock Lighting, Remote Area Lighting, Military Base Lighting, Jogging and Bike Path Lighting.
We manufacture and export Solar Home Lights for Rural areas MODEL I-III of the world's best quality.
Off grid Rated power: 1000W Dimension(W/H/D): 225*355*92mm Net weight: 5kgs LCD display This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Solar road stud, solar street lights.
We have 2units of Samsung (SD20) brand bulldozers brought from the Korean military. It's in good condition because it was brought from the military.
Solar modules, solar lawn lights, solar road lights, solar garden lights, solar traffic lights, solar scenery lights.
1, Just need 15 miniuts to heating 5 liters 20 water rise to 100. 2, Rated power: equal to 1500W electric heater. 3, Weight Bearing: 8kg 4, Reflector diameter: 1.5m 5, Power out put: 1000-1800W 6, Focus Length: 650mm 7, Focus temperature: 800-1200 8, CTNS Packing: 9, Container Loading Sets: 20GP/390sets; 40GP/790sets; 40HQ/960sets
Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
Rated power: 1-5KW Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Bult in MPPT 60A/80A solar charge controller Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function WIFI remote monitoring (optional) Compatible to generator Support parallel operation up to 3 units (available for 3KW-5KW 48V) This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power: 1-5KW Pure sine wave output Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Bult in MPPT 60A/80A solar charge controller Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function WIFI remote monitoring (optional) Compatible to generator This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power : 3KW Pure sine wave solar inverter Output power factor 1 Built-in 80A MPPT solar charger Built-in anti-dust kit for harsh environment WIFI remote monitoring (optional) Compatible to generator PV1800 VHM is a multi-functional inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power support in portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc). Built-in MPPT solar charge controller MAX PV Array Open Circuit Voltage: 450V Can provide the power to the load without battery Combining solar system, AC utility, and battery power source to supply continuous power Overload, short circuit and Deep discharge protection Cold start function Support USB, RS485 monitoring function Parallel operation with up to 3 units WIFI remote monitoring (optional) PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
On grid / Grid-tied Rated power: 4200W No. of MPPT: 2 Strings per MPPT: 1 Phase: single phase Warranty: 10 years Dimension(W/H/D): 355*412*153mm Net weight: 13.5kgs LED display The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 5000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 21kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 4600W No. of MPPT: 2 Strings per MPPT: 1 Phase: single phase Warranty: 10 years Dimension(W/H/D): 355*412*173mm Net weight: 14.5kgs LED display The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
