Solar Inverters Suppliers and Manufacturers

Functional characteristics: It has the function of segmented charging and discharging. Backflow prevention and grid connection function. Insulation resistance and leakage current detection function. Working without battery under special conditions. Lithium battery activation function, which can be triggered by mains or PV. Power saving mode, reduce no-load loss. .Four charging modes: PV Only, Mains Priority, PV Priority and PV&Mains hybrid charging. Two output modes: mains bypass and inverter output, with UPS function. 360 all-round protection. Allow lead-acid battery and lithium battery access. ON/OFF switch controls the inverter AC output Grid-connected mode can be set. Design characteristics: Adopting full-digital double closed loop control, combined with advanced SPWM.technology and pure sine wave output. Advanced MPPT technology with efficiency of 99.9. LCD screen and three LED indicator lights can clearly indicate the status and data. Intelligent and variable-speed fan, efficiently dissipate heat and extend system life. Multiple safety protection functions: short circuit protection, overload protection,reverse polarity protection and so on.

Solar Hybrid inverter (inbuilt MPPT) On/Off -Grid Hybrid solar inverter with or without battery PV input voltage up to 450VDC Grid or solar input priotiry can set . Parallel max 9 sets to reach 45KW 3KW,5KW,8KW Direct factory price Easy to install Available OEM /ODM

Off-grid hybrid solar inverter 3KW ,5KW Solar Hybrid inverter (inbuilt MPPT) On/Off -Grid Hybrid solar inverter With or without battery PV input voltage up to 450VDC Grid or solar input priotiry can set . Parallel max 9 sets to reach 45KW Direct factory price Easy to install Available OEM /ODM

PT330 special inverters are developed for the power supply of water pumps based on the core control algorithm of PT330 high performance inverters and the control requirements of PV water pumps.All series products apply infineon power modules.The funiction of Maximum power tracking,dormant at weak light,wake up at strong light,high water level dormant,underload pre-warning and other control protection functions can ensure normal operation of water pumps according to the customers' requirements to switch to the grid power supply. 1.Through adopting advanced MPPT technology,this product can make full use of the efficiency of the solar cell array. 2.It can automatically adjust the motor speed and the water flow along with the intersity of sunlight. 3.Automatically sleep when on high-water level and automatic restart when on low-water level to realize automatic control through water level. 4.Can prevent pump from anhydrous idling. 5.It also can enter automatically to sleep model when the intensity of sunlight is weak(e.g.The sunset.),as well as can exit the sleep model when the intensity of sunlight is becoming strong(e.g.the sun rise.). 6.Protect itself in trouble and improve the reliablity of whole system.   Model: PT330-011D-3B: DC/AC input voltage: DC input:400-750vdc AC input:3-phase 380V           power:  11KW                 Rated input current: 26A               Rated output current: 25A              Adaptable motor: 11KW

Non-isolated( transformerless) Max input power(dc):4400w Max dc input voltage:680v Trigger voltage: 420v dc Mppt voltage range350~600v dc Rated input current(dc):13a Max input current Dc input channels¡êo 2 Rated ac output power:4000w Max ac output power:4400w Rated grid voltage: 230/240v ac Grid voltage range:195.5~270 ac Max output current: 20a Rated grid frequency: 50/60hz5% Displayo 1 lcd, 2 led Thd&3% Power factor>99% Direct current injection

This ARKA power generator collects and stores solar energy in the battery and generates pure sine wave 220v ac output to power domestic electric appliance and fittings. It has a inbuilt proprietary microprocessor based dual solar-grid charge controller with unique and advanced intelligence logic to select either solar power as priority or ac mains to power up the loads without interruption. It has distinctive battery management system with advanced protections to make it one of the most rugged solar electric power generating system available. 10 nos, 25 kgs.

Commercial Solar Inverter Commercial solar inverter are designed to handle the scale of power production and consumption required for large projects. If the system includes battery storage, the inverter can also help store excess solar energy in the batteries or charge it from the grid. Commercial properties typically use three-phase power, and commercial three-phase inverters are designed to synchronize with three-phase power to provide a more stable current. The right choice of inverter for commercial solar and battery systems depends on a variety of factors, including the size and configuration of the solar array, the presence of a battery storage system, the type of electrical system in the building, and local codes and utility policies. Commercial solar inverter is larger and more powerful versions of residential inverters, specifically designed to handle the higher electricity demands of commercial and industrial applications. They are a crucial component of a commercial solar power system, responsible for converting the direct current (DC) electricity generated by solar panels into usable alternating current (AC) electricity to power commercial buildings, factories, and other large-scale facilities. Our state-of-the-art commercial solar inverters, combined with our expertise in solar energy, provide innovative solutions that drive your business towards sustainability.

A solar inverter is an important part of a home solar system. It converts the direct current (DC) stored in batteries into alternating current (AC) that can be used by household appliances. Most homes use AC power, although solar panels and small wind turbines often produce DC power. This is why inverters are an integral part of off-grid and grid-connected solar systems. Uses and Benefits of Solar Inverters In the absence of a backup grid, battery-based inverters can meet less demanding requirements. However, if there is an accessible grid, a system with a hybrid inverter can take advantage of it, and has the added benefit of storing power with batteries when the sun is not shining. If the roof is heavily shaded, a microinverter system is a good choice because it has an inverter on each photovoltaic (PV) module and each module is managed separately to provide excellent efficiency and high throughput.

Intelligent Solar Inverter Since the Senergy Power Optimiser handles maximum power point tracking and voltage management separately for each solar module, the intelligent solar inverter is only responsible for the DC to AC inversion. It is therefore a simpler, more cost-efficient and more reliable solar inverter. The fixed string voltage ensures that operation is always at maximum efficiency, independent of string length and temperature. In addition to its function as a DC-optimised PV inverter, the intelligent solar inverter also manages the battery and system energy as part of the Senergy home solution. Versatile and intelligent hybrid inverter for continuous power supply using solar, AC and battery power. This is a simple and intelligent solar inverter with an energy storage system for homeowners who want to store energy in batteries for night-time use or for their own use on demand. It will automatically consume the reserved power from the batteries at night or during power outages. This hybrid PV system will reduce dependence on the utility. Smart Energy Home Intelligent solar invertercan already monitor and manage solar energy production and are perfect for managing energy storage and energy use. Inverters can store solar energy in batteries for use at night, use excess PV energy to heat water, or activate other smart devices during the day to help reduce electricity bills. By managing energy holistically, the PV inverter transforms the smart home into a smart energy home and puts power in the hands of consumers.

Inverters for commercial and industrial photovoltaics and battery storage Saving energy costs and reducing the CO2 footprint are important issues for companies. Three effective ways of achieving greater energy efficiency are: generating and consuming renewable energy through low-maintenance solar PV plants â?? integrating battery storage systems, e.g. to perform peaking â?? and reducing the need for expensive reactive power. senergy new energy offers suitable inverters for all these measures. Be prepared for everything Simple surge protection Firemans switch can be triggered remotely DC combiner to prevent AC lines on the roof Lean solutions for grid and system protection Compact reactive power inverters for new and existing plants

Solar inverter 5kw for large houses, offices and commercial shops. senergys Solar Inverter 5KW is the first choice for customers with frequent power cuts in homes, commercial shops etc. It is equipped with a solar inverter capacity of 5.5KVA. It can easily run 2 tons of AC power using 2 fans, 8 LED lights and 1 fridge. The price of the Solar Inverter 5KW depends on the type of solar system. Solar Inverters 5KW is divided into three categories: 1st grid-connected solar system, 2nd off-grid solar system, 3rd hybrid solar system. Solar Inverter 5KW for large houses, offices and commercial shops. Solar Inverter 5KW from Senergy is the first choice for customers with frequent power cuts in homes, commercial shops etc. It is equipped with a solar inverter capacity of 5.5 kVA. It can easily run 2 tons of AC power with 2 fans, 8 LED lights and 1 fridge. Is this solar panel kit right for me? This kit based on a 5kW micro-inverter is an important residential solar system. It is one of the most popular installed systems. The amount of energy produced by these systems is enormous. A Solar inverter 5kw kit requires a maximum of 299 sq ft of space. This Solar inverter 5kw kit can provide 5,000 watts of DC electricity. Assuming at least 5 hours of sunshine per day and a south-facing solar array, this could produce an estimated 350 to 850 kilowatt hours (kWh) of alternating current (AC) per month. The highest output will be achieved by an unobstructed south-facing view of the sun to obtain maximum solar energy. Actual power generated will vary depending on location, equipment and installation factors. Please refer to your electricity bill for the actual kWh of electricity used each month and compare this to what can be generated by these low cost 5kW PV systems.

Commercial solar inverter are designed to handle the scale of power production and consumption required for large projects. If the system includes battery storage, the inverter can also help store excess solar energy in the batteries or charge it from the grid. Commercial properties typically use three-phase power, and commercial three-phase inverters are designed to synchronize with three-phase power to provide a more stable current. The right choice of inverter for commercial solar and battery systems depends on a variety of factors, including the size and configuration of the solar array, the presence of a battery storage system, the type of electrical system in the building, and local codes and utility policies. Commercial solar inverter is larger and more powerful versions of residential inverters, specifically designed to handle the higher electricity demands of commercial and industrial applications. They are a crucial component of a commercial solar power system, responsible for converting the direct current (DC) electricity generated by solar panels into usable alternating current (AC) electricity to power commercial buildings, factories, and other large-scale facilities. Our state-of-the-art commercial solar inverters, combined with our expertise in solar energy, provide innovative solutions that drive your business towards sustainability.

Commercial solar inverters are larger and more powerful versions of residential inverters, specifically designed to handle the higher electricity demands of commercial and industrial applications. They are a crucial component of a commercial solar power system, responsible for converting the direct current (DC) electricity generated by solar panels into usable alternating current (AC) electricity to power commercial buildings, factories, and other large-scale facilities. Features SUPERIOR EFFICIENCY Maximum efficiency of 98.5% Large string current, compatible with large PV modules 30KW with natural cooling design HIGH RELIABILITY IP66 protection level for outdoor installation DC/AC Type Il SPD Optional: AFCl, Night SVG, I/V detection, and integrated PID INTELLIGENT MAINTENANCE Power consumption monitoring Remote configuration and upgrade Quick commissioning via mobile app String level current detection

Model Sununo Plus 2K Input Parameters Input Parameters Maximum DC power w 2400 Maximum DC input voltage v 500 Mppt voltage range v 60450 Rated input voltage v 360 Starting voltage v 70 Minimum input voltage v 50 Maximum input current a 11 Mppt track path 1 Number of component strings MPPT per lane 1 Dc switch Built in Output Parameters Output Parameters Rated output power w 2000 Maximum output power w 2200 Rated output current a 91 Maximum output current a 106 Rated AC voltage range v 220180280 Rated grid frequency range Hz 504555 Power factor cos 099 Full load Total harmonic distortion thdi at rated power 995 Protections Protections Overvoltage protection Integrated Insulation impedance monitoring of DC terminal Integrated Dc component detection Integrated Ground fault current monitoring Integrated Grid monitoring Integrated Ac output short circuit protection Integrated Ac ground detection Integrated Ac lightning protection Integrated Overheat protection Integrated Islanding protection monitoring AFD Interface Interface Ac side connector quick connector Dc side connector MC4H4 LCDLEDdisplay LCD 16x2Character backlight LED 3lamp Display language english communication interface RS232 communication method Wi fi GPRS Ethernet optional General Parameters General Parameters Isolation type Non isolated Night wear w

Model Suntrio Plus 25K Input Parameters Input Parameters Maximum DC power w 30300 Maximum DC input voltage v 1000 Mppt voltage range v 180900 Rated input voltage v 600 Starting voltage v 200 Minimum input voltage v 180 Maximum input current pv1 pv2 pv3 a 222222 MPPTNumber of tracks 3 Number of component strings MPPT per lane 02022002 Dc switch Built in Output Parameters Output Parameters Rated output power w 25000 Maximum output power va 27500 Rated AC voltage range 3LNPE220380V180V280V312V485V Rated grid frequency 50Hz45Hz55Hz Power factorcos 08 lead 08 lag Number of output phases 3LNPE Efficiency Efficiency Maximum efficiency 9860 European efficiency600Vdc 9840 MPPT efficiency 995 Protections Protections Overvoltage protection Built in Insulation impedance monitoring of DC terminal Built in Dc component detection Built in Ground fault current monitoring Built in Grid monitoring Built in Ac output short circuit protection Built in Low voltage crossing Built in Overheat protection Built in Ac surge protection Class iii protection class ii protection optional Anti component attenuation module Optional Dc surge protection Level ii protection optional Dc fuse Optional Cluster current detection Built in Islanding protection monitoring AFD Interface Interface DC Jack MC4H4 AC Terminal Terminal block LCDLED display 35 inch LCD Backlight Display language english communication interface 2RS4851RS232 communication method WiFiGPRSEthernet optional General Parameters General Parameters Isolation type Non isolated Night wear w

Model Suntrio Plus 60K Input Parameters Input Parameters Maximum DC power [ w ] 72000 Maximum DC input voltage ( v ) 1000 Mppt voltage range ( v ) 280-900 Rated input voltage ( v ) 600 Starting voltage ( v ) 300 Minimum input voltage ( v ) 250 Maximum input current pv1 / pv2 / pv3 ( a ) 40/40/40 MPPTNumber of tracks 3 Number of component strings ( MPPT per lane ) 04-04-2004 Dc switch Built - in Output Parameters Output Parameters Rated output power ( w ) 60000 Maximum output power ( va ) 60000 Rated AC voltage / range 3L/N/PE,220/380V;180V~280V/312V-485V Rated grid frequency 50Hz/45Hz-55Hz Power factor(cos ) 0.8 lead ~ 0.8 lag Number of output phases 3L+N+PE Efficiency Efficiency Maximum efficiency 98.90% European efficiency[@600Vdc] 98.60% MPPT efficiency>99.5% Protections Protections Overvoltage protection Built - in Insulation impedance monitoring of DC terminalï¼? Built - in Dc component detectio Built - in Ground fault current monitoringï¼? Built - in Grid monitoringï¼? Built - in Ac output short circuit protectionï¼? Built - in Low voltage crossingï¼? Built - in Overheat protectionï¼? Built - in Ac surge protectionï¼? Class iii protection, class ii protection ( optional ) Anti - component attenuation moduleï¼? Optional Dc surge protectionï¼? Level ii protection ( optional ) Dc fuseï¼? Optional Cluster current detectionï¼? Built - in Islanding protection monitoringï¼? AFD Interface Interface DC Jackï¼? MC4/H4 AC Terminalï¼? Terminal block LCD/LED displayï¼? 3.5 inch LCD Backlight Display languageï¼? english communication interfaceï¼? 2*RS485+1*RS232 communication methodï¼? Wi-Fi/GPRS/Ethernet ( optional ) General Parameters General Parameters Isolation typeï¼? Non - isolated Night wear ( w )ï¼?

Solar inverter 5kw, 80A, 48W Made in china

Solar Pump Inverter

High Frequency On Grid Solar Inverter PH5000 Series (2.5-6KW) PH5000 series PV inverters take full account of the needs of end customers, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control,could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product. Features: Rate power: 2.5-6KW Wide range of MPPT voltage 100-500V MPPT efficiency up to 99.50% Optional integrated anti-backflow control Multiple communications: USB,WIFI etc Monitoring inverters freely via mobile phonese APP Continuous adjustable power factor Five year warranty

TellS Introducing new solar inverter, or photo-voltaic inverter, or Solar converter, converts the variable direct current (DC) output of a photo-voltaic (PV) solar panel into a utility frequency alternating current (AC) that can be fed into a commercial electrical grid or used by a local, off-grid electrical network. Worked Off-grid with Battery Bank. Customize priority with options of Solar - Battery - Grid & Solar - Grid – Battery. Efficiency more Then 95%. Inbuilt solar charge controller with the option of MPPT & PWM technology. Intelligent operation for improved battery life. In case of unavailability of solar, charging from grid. Low change over time in µsec. Suitable for Roof - Top projects. Option for data logging through RJ-232 cable. Standalone-High Frequency Solar Inverter: 100VA/12V, 300VA/12V, 400VA/12V, 500VA/24V, 750VA/24V 1600VA/48V, 2000VA/48V Off-Grid Solar Inverter-1 phase in-1 phase out: 5KVA/48V, 5KVA/96V, 7.5KVA/120V, 10KVA/180V Off-Grid Solar Inverter-3 phase In-3 phase out 20KVA/240V, 30KVA/240V, 40KVA/360V, 100KVA/360V