1.All Glass Vacuated Tube All glass evacuated tubes are the key component of solar collectors. The evacuated tube is similar to a conventional Dewar flask and consists of two borosilicate glass tubes, a glass with high chemical and thermal shock resistance. The outer side of the inner tube is coated with a sputtered solar selective surface. This coated inner tube is closed at one end and sealed at the other end to the outer tube. The annular space between the outer tube and inner tube is evacuated to virtually eliminate heat loss by conduction and convection. We use the tubes which use the successfully developed innovative Advanced Solar Selective Coatings in commercial scale, which achieve the highest thermal efficiency and good thermal stability. Solar selective coatings absorb most solar radiation while simultaneously suppressing the thermal emittance loss from coating surfaces. They vary mainly in their optical property and thermal stability. Excellent results have been obtained by using DC magnetron sputtering technology. A solar absorbance of 0.94 - 0.96 with an emittance of 0.04 - 0.06 at 100 centigrade has been achieved. Models º¦47í-150 º¦58í-180 Weight 1.35í+0.12kg 2.29í+0.18kg Structure All glass coaxial double-layer tubes All glass coaxial double-layer tubes Outer tube diameter º¦47í+0.7mm º¦58í+0.7mm Inner tube diameter º¦37í+0.7mm º¦47í+0.7mm Outer Tube thickness 1.6í+0.15mm 1.8í+0.15mm Inner tube thickness 1.6í+0.15mm 1.6í+0.15mm Tubes length 1542í+4mm 1812í+4mm Material of coating AlN/AIN-SS/Cu AlN/AIN-SS/CU Absorptance 0.94~0.96 0.94~0.96 Emittance 0.04~0.06 0.04~0.06 Vacuum Pí_5í-10-3pa Pí_5í-10-3pa Transmittance of Outer Tube 0.91 0.91 Stagnation temperature (height) 270~300íµ 270~300íµ Heat-loss coefficient í_0.6w/ m2*íµ) í_0.6 w/ (m2*íµ). Bearing hailstone ability hailstone diameterº¦25mm hailstone diameterº¦25mm. Pressure-endure ability 1MPa 1MPa.
Super Heat-Conducting Tube is consists of the glass tube and copper pipe. The temperature can be more 300 in the tube. Features: 1) High heat effectiveness: higher than all glass evacuated solar collector tube by 15%. 2) heat pipes conduction: successfully prevents the defects of tube breakage and low power output caused by water fouling and deposits or dust and sand. 3) Prevents the tube from being easily broken caused by volume expansion when water freezes in the frigid season. 4) Low thermal capacity makes the tube start up quickly. 5) Energy output of sunshine within only 2 minutes. 6) Insulation temperature can reach 250, average heat efficiency can still be more than 50%; even under -50. 7) High efficient selective absorptive coatings and vacuum heat insulation technology ensure the tube has higher heat output in cloudy weather and in moist areas, especially in winter. 8) Solar collecting plate is sealed inside a high quality borosilicate glass tube with 5 x 10 - 3Pa of vacuum, to stop corrosion; even in moist conditions. Metal-glass evacuated solar collector tube consists of a single glass tube and a flat or curved aluminum plate inside attached to a copper heat pipe.
Glazing glass is a combination of two or more pieces of glass spaced apart with a spacer bar and hermetically sealed with a primary and secondary sealant to form a single unit with one or more air spaces between each other. Max size :3300*12000mm Main character : Energy saving , improving the thermal performance Sound insulated Security and comfort Component : 1.� Glass items:� consists of hard or soft low E glass ,reflective glass ,clear glass ,tinted glass, with types of flat tempered ,bent ,laminated processing ,according to the application 2.� Spacer bar :is the material used to separate the two glass lites in an IGU. It can be made by aluminum,stainless steel,hybrid ,plastic material . The spacer width usually from 6mm-18mm.
It is processed by controlled thermal or chemical treatments to increase its strength compared with normal glass, about four times stronger than annealed, glass. When broken, tempered glass fractures into small, relatively harmless pieces, it is widen used for window, door, railing, furniture, vehicle.
JHG pattern glass is widely used in cabinets, windows and doors. and also we also can offer you finished products with cut, polished, tempered, laminated, acid etched. JHG pattern glass� is a kind of decorative translucent glass with embossed patterns on one or both surfaces. Pattern glass is generally used where privacy or obscurity is desired but light transmission is still important. With the special property of decoration, patterned glass can allow light to pass through, at the same time, it can also prevent clear view. Usually it transmits only slightly less light than clear glass.JHG pattern glass is widely used in cabinets, windows and doors .and also we also can offer you finished products with cut� ,� polished, tempered , laminated, acid etched . Max size :2000X3660MM Thickness :3-10mm Colour : clear/ bronze/blue/green/ grey
JHG is professionally offering all various of high quality laminated glass: 1) PVB laminated glass Colour includes clear/milk/bronze/grey/blue/green/black PVB film thickness is 0.38/0.76/1.14mm or thicker Both standard size and customized sizes available 2)Sentryglass Plus(SGP)laminated glass SGP bring more safe,more transparent for construction ,the film includes 0.89/1.52/2.28mm and thicker mainly used for glass floor,glass step,glass fin,curtain wall Max size is 18000mm length 3)EVA laminated glass It can be laminated with large range of inserts including PET film,polycarbonates,wood veneer,metal,paper ,stones,screeen mesh ,and so on ,it will bring mulrirusinous choice for inner decoration.
JHG tinted glass is produced by metal oxides to the float glass. The colour may be transferred in the series of blue, green, grey, bronze flexibly. The performance of visible light, privacy and solar heat transmission will be changed arrording the colour change. Different tinted glass offers varied application possibility-from interior partitions, to home appliance, to furniture, to facades and auto field. Reflective glass is float glass with a metallic coating that cuts off solar heat.The coating film may provide mirror effect, preventing visibility from outside and preserving privacy. JHG mainly offer 2 kinds of reflective glass. Hard reflective glass (on line) includes blue, green, grey, bronze, pink, silver colour, Soft reflective glass (off line) includes golden, silver, purple colur. Specification Sizes:1220*1830/1830*2440/1650*2140/2140*3300/2140*3660/2440*3660/2250*3660/3300*4500/5100/6000mm Thickness: 3-12mm Quality standard GB11614-2009/SGCC/EN 572
Hard low E is produced by spraying a chemical material with Tin componds on the melting glass surface to form single layer of compound film with certain low emissivity function. Applicationï¼? Architecture:� curtain wall, facade, windows and doors Home appliance: micro oven, refrigerator Advantage: Improved energy efficiency Less UV Reduced condensation Specification: Glass Thickness: 3.2mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm Max size:� 3300*8000mm Normal size:� 2134x3300mm, 2440x3300mm, Quality Standard: In accordance with CE, GB, AS/NIS 2208-1996
Glass facade systems including insulated glass systems, tempered glass, laminated glass, sentry glass, heat soak tested glass, aluminium systems of building, facade, industrial applications with new mold and extrusions..Shipping and transsportation
Different kinds of sheet/float glass from 1.1-25mm is in high quality ,which is suitable as material for window,door,curtain wall, mirror,home appliance ,furniture. the colour includes : clear float ,extra clear float glass euro bronze,golden bronze float glass euro grey ,dark grey float glass ford blue ,dark blue float glass F green ,dark green float glass black float glass all colour reflective glass
1. Cost advantage: we are specialized in sublimation materials, such as phone cases, designing and manufacturing in one stop service, so we can give you lowest price 2. Technology advantage: we have strong capabilities, and specialize in providing comprehensive technical support services for manufacturing of Design precise plastic injection, surface coating, silk-screen, pad printing, IMD Tech, and so on, and we have an experienced professional team, it keeps our capabilities of innovation and application. 3.Quality advantage:All products must pass the inspection by professional QC team. 4.Warranty advantages: Free exchange guarantee, if you receive what is different from your order or is too bad to accept, please contact us as soon as possible, we promise to solve your problem in 24 hours.
JHG silk-screen printed glass is one kind of decorative glass made by printing layer of ceramic ink on the surface of glass through the screen mesh for tempering or heat-strengthening process after. As a result silk-screen printed glass is durable, scratch-proof, solar shading and with anti-glare effect. Silk screen glass is widely usded for architecture ,home application ,furniture , auto window shild. Max size 2440*3660mm ,All colour is available .