It is small, with long lifespan and good self-healing ability. It is widely used as the start-up and running capacitor, especially for micro water pumps, cleaning machines, washing machines, and single-phase water pump motors.
PP Film Roll Mix Color Plastic Scrap For Sales MATERIAL PP Film Roll Mix Color CATEGORY PP TYPE Roll GRADE Mix Clor SPECIFICATION Origin in Japan Origin Japan LOADING WEIGHT 20 MT FOB (USD/Ton) 300-700
Introduction 1.Low D.F. 2. Internally series-connected. 3. Self-healing property. 4. Suitable for high voltage, large current/pulse Application. Eg, crt deflection tuning circuit, Electronic ballast. Specification: 1.Operating temperature : -40óxc ~ + 85óxc 2.Capacitance range : 0.001~0.033uf 3.Capacitance tolerance : í=2%(g), í=5%(j), í=10%(k) 4.Rated voltage : 1000/1200vdc, 1500v/1600vdc 2000v. 2500v. 5.Dissipation factor :0.08%max at 1khz, 25óxc 6.Insulation resistance :100, 000mw min 7.Dielectric strength: 250% of rated voltage for 5 sec
Cmmdity: Aluminum Fluride (Aluminium fluride) ther name: Aluminum trifluride Frmula:AlF3 M.W.:83.98 Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released. Specificatin: grade chemical cmpsitin % Physical character F Al N2 Fe2342- P25 LI Bulk dity g/cm3 AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5 AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3 AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7 AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7 Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc. Brief Intrductin f the Prductin Technics In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water. Packaging packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
S-BOPP Capacitor Film (Simultaneously Stretching Polypropylene Film for Capacitor) Thickness: 2micron-12micron Width: 620MM/920MM Advances of S-BOPP compared to BOPP: 1.Higher Dielectric Breakdown Strength 2.Better thickness tolerance 3.lower MD heat shrinkage
Being a well-distinguished companies in the market, we are into offering Stretch Film. Features: Precision-designed Light in weight Graceful pattern
Features: (1) All of it's performance indexes reach the requirements of IEC252 criterion (2) High quality Specifications: (1). Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: 3,000M+ (b) Between leading-out end and shell: 1,000M+ (5) Tangent of loss angle: tg-_0.002 (50Hz)
Detailed Product Description Features: (1) All of it's performance indexes reach the requirements of IEC252 criterion (2) High quality Model No.: CBB60 Product Origin: China Brand Name: LMG Price Item: FOB, CIF, CNF Payment Terms: T/T, L/C Supply Ability: 200,000pcs/month MOQ: 500pcs Delivery Lead Time: 15-20 days Certifications: CQC, CE, TUV, UL Detailed Product Description: (1) Widely applied to AC single phase motors for running (2) High quality, Good performance Specifications: (1). Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +/-5%, +/-10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: fª3,000M¬+ (b) Between leading-out end and shell: fª1,000M¬+ (5) Tangent of loss angle: tg¬-f_0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing
Detailed Product Description Features: (1) Widely applied to AC single phase motors for running (2) High quality Specifications: (1) Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: 3,000M+ (b) Between leading-out end and shell: 1,000M+ (5) Tangent of loss angle: tg-_0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing
Detailed Product Description Features: (1) Widely applied to AC single phase motors for running (2) High quality Specifications: (1). Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdownDetailed Product Description Features: (1) Widely applied to AC single phase motors for running (2) High quality Specifications: (1) Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: 3,000M+ (b) Between leading-out end and shell: 1,000M+ (5) Tangent of loss angle: tg-_0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing
Detailed Product Description Features: (1) Widely applied to AC single phase motors for running (2) High quality Specifications: (1) Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: 3,000M+ (b) Between leading-out end and shell: 1,000M+ (5) Tangent of loss angle: tg-_0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing
Detailed Product Description Features: (1) Widely applied to AC single phase motors for running (2) High quality Specifications: (1) Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: 3,000M+ (b) Between leading-out end and shell: 1,000M+ (5) Tangent of loss angle: tg-_0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing
Detailed Product Description Features: (1) Widely applied to AC single phase motors for running (2) High quality Specifications: (1) Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: 3,000M+ (b) Between leading-out end and shell: 1,000M+ (5) Tangent of loss angle: tg-_0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing
Detailed Product Description Features: (1) Widely applied to AC single phase motors for running (2) High quality Specifications: (1) Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: 3,000M+ (b) Between leading-out end and shell: 1,000M+ (5) Tangent of loss angle: tg-_0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing
Detailed Product Description Features: (1) Widely applied to AC single phase motors for running (2) High quality Specifications: (1) Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: 3,000M+ (b) Between leading-out end and shell: 1,000M+ (5) Tangent of loss angle: tg-_0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing
Detailed Product Description Features: (1) Widely applied to AC single phase motors for running (2) High quality Specifications: (1) Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: 3,000M+ (b) Between leading-out end and shell: 1,000M+ (5) Tangent of loss angle: tg-_0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing
Detailed Product Description Features: (1) Widely applied to AC single phase motors for running (2) High quality Specifications: (1) Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: 3,000M+ (b) Between leading-out end and shell: 1,000M+ (5) Tangent of loss angle: tg-_0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing
Detailed Product Description Features: (1) Widely applied to AC single phase motors for running (2) High quality Specifications: (1) Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: 3,000M+ (b) Between leading-out end and shell: 1,000M+ (5) Tangent of loss angle: tg-_0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing
Detailed Product Description Features (1) Widely applied to AC single phase motors for running (2) High quality Specs: (1) Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: 3,000M+ (b) Between leading-out end and shell: 1,000M+ (5) Tangent of loss angle: tg-_0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing
Detailed Product Description Features: (1) Widely applied to AC single phase motors for running (2) High quality Specifications: (1) Climate type: 25 / 85 / 21 (2) Capacitance tolerance: +5%, +10% (3) Testing voltage: (a) Between leading-out: 1.75UR, 10S no breakdown (b) Between leading-out end and shell: 2,200V AC, 10S no breakdown (4) Insulation resistance: (a) Between leading-out ends: 3,000M+ (b) Between leading-out end and shell: 1,000M+ (5) Tangent of loss angle: tg-_0.002 (50Hz) (6) Used especially for micro water pumps, cleaning machines, washing machines and single-phase water pump motors (7) Small and lightweight (8) Long lifespan and good self-healing
