Silver Plated Conductive Nylon Signal Line Suppliers and Manufacturers

What is PET Open Agent Film Chips? PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film. It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable. As an opening agent to be used with film grade base materials to produce various types of films. It can be used in films with special requirement for optical and surface properties or ultra-films below 8u. Can be used directly in foodstuffs after FDA approval.

What is PET Open Agent Film Chips? PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film. It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable. As an opening agent to be used with film grade base materials to produce various types of films. It can be used in films with special requirement for optical and surface properties or ultra-films below 8u. Can be used directly in foodstuffs after FDA approval.

This type Chips that is designed to resist burning and melting at low temperatures. Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating Description: Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220. The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180. Application: Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products. LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane. Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue. Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.

What is pe/pp bicomponent fiber? PE/PP bicomponent fiber is a type of synthetic fiber that is made up of two different polymers, polyethylene (PE) and polypropylene (PP), which are combined in a single filament. What are the advantages of using PE/PP bicomponent fiber in textiles? PE/PP bicomponent fiber offers several advantages in textiles, including improved strength, durability, and moisture management. It also provides a softer feel and can be used in a variety of applications, such as sportswear, outdoor apparel, and home textiles. What are some common uses of PE/PP bicomponent fiber in the textile industry? PE/PP bicomponent fibers have several advantages that make them popular in the textile industry. Some of these advantages include: Improved Strength: PE/PP bicomponent fibers have a higher tensile strength than regular fibers, making them ideal for use in high-stress applications. Enhanced Durability: These fibers are resistant to wear and tear, making them ideal for use in products that need to withstand daily use. Improved Comfort: PE/PP bicomponent fibers have a soft texture, which makes them comfortable to wear against the skin. Moisture Management: These fibers are hydrophobic, which means they repel water and moisture. This property makes them ideal for use in products that need to stay dry. Some common uses of PE/PP bicomponent fiber in the textile industry include: Clothing: These fibers are often used in the production of sportswear, outdoor clothing, and other products that require enhanced durability and moisture management. Home Textiles: PE/PP bicomponent fibers are used in the production of carpets, curtains, and other home textiles that require enhanced strength and durability. Nonwoven Fabrics: These fibers are used in the production of nonwoven fabrics, which are used in a wide range of applications, including medical products, hygiene products, and filtration materials. Overall, PE/PP bicomponent fibers offer several advantages that make them a popular choice in the textile industry for a wide range of applications.

Sunshine Beach Tent outdoor Tent Ultralight Folding waterproof Pop Up Automatic Open Tourist Fish Camping UV-protective Sun Shad Sunshine Beach Tent outdoor Tent Ultralight Folding waterproof Pop Up Automatic Open Tourist Fish Camping UV-protective Sun Shade Tent Specification: Fabric: Polyester fiber Open way: Quick automatic opening Tent weight: 1kg Size:165*150*110cm Folding Size: 45 * 8cm Package Includes: 1 x Tent, 6 x steel Ground Stakes Features: Automatically open: one second quick opening without building, simple and convenient, no assembly required. Capacity: Can accommodate up to 3-4 people, very suitable for couples, can provide a lot of storage space for your camping equipment. Easy to install and free to place: Equipped with a full-size carrying bag with shoulder strap for easy carrying and store. 50+ UPF:The flame resistant nylon fabricaround the coverage has a UV rating of 50+ UPF to protect you and your family from the sun's harmful rays. Come in a convenient handled carry bag for compact storage and easy transport. Tent pegs and pouches for holding sand for fixing under windy conditions. Special silver coated 170T polyester fabric, water-resistant and UV-resistant. Durable, useful tent for fishing, picnic or having beach fun. Application: The first choice for parks, beaches, hiking, adventure, fishing, kayaking, car camping, backpacking or cycling.

Price - Rs 1,470/ Set Minimum Order Quantity: 12 Set Material : White Rhodium Packaging Type : Packed in zip bag and plastic box Diamond Type : American Diamond Size : Free Studded With AD Diamonds Features : Partywear necklace Appearance : Elegant Rich nechlace studden with AD diamonds Care Keep away from perfume and soap Earring Type : medium length earings Gender : women Jewelry Type : Necklace Set Occasion : Party Wear Plating : White Rhodium Color : Silver Diamond Color : white American Diamond Necklace Set Pack of 12 Each pack has one necklace and 2 earings. Color: Silver and Gold Care: Keep it away from perfume and soap Occassion: Party and Wedding Diamond: American Diamond Net weight: 43 grams It can be worn in grand parties, wedding, reception etc

Olive oil is the oil that comes from the fruit of the olive tree (Olea europea). Virgin olive oil is produced by mechanical processing of the olive fruit in olive mills. It is a key element of the Mediterranean diet and is considered a healthy food product due to its content of monounsaturated fats, antioxidants, etc. Physical and chemical characteristics Crude virgin olive oil is a mixture of various ingredients. These can be distinguished into three categories: Glycerides, fat-soluble substances and water-soluble substances. They can also be distinguished into saponifiable and non-saponifiable components. Glycerides, which are also saponifiable components, are mainly triglycerides, i.e. esters of glycerol with fatty acids. The latter are mainly: oleic, palmitoleic, linoleic, stearic and palmitic. The first three are unsaturated fatty acids, and the other two are saturated Historical data In the Greek area, presses for the production of oil from olives and containers (jars) for oil storage dating from the Mycenaean era have been found. According to the excavations carried out in the Proto-Cycladic II (2,700-2,300 BC) cemetery of Spedos in 1903 by Klonos Stefanos, among the other finds, he mentions a silver-plated clay vessel which contained traces of spoiled olive oil. The careful research in the chemistry of the National University under Professor K. Zengeli proved, beyond doubt, the existence of olive oil. Klonos Stefanos (in the Proceedings of the Archaeological Society PAE 1906) notes that together with the silver-plated clay vessel, a triple clay oil lamp was found. Olive oil is referred to on a Linear B tablet from Knossos as erawo (oil) and on others with a special ideogram. Olive oil and health Olive oil contains high levels of monounsaturated fatty acids (MUFA) as well as an abundance of bioactive components. Of these, the phenolic components are the most extensively studied. Regarding the benefits of MUFAs in human health, the US Food and Drink Administration authorized qualitative health claims (health claims), for the first time in 2004, regarding the protection offered by monounsaturated fatty acids of olive oil against cardiovascular risk diseases. Overall, the benefits of olive oil fatty acids were summarized at the first International Conference on Olive Oil and Health, in 2005. But olive oil is more than a rich source of monounsaturated fatty acids. Its phenolic components have shown anti-inflammatory and chemo-protective properties. Oleocanthal in olive oil has been found to have a similar effect to the anti-inflammatory drug ibuprofen. In none of the studies in which the role of phenolic components of olive oil has been examined, cytotoxicity has been shown.

Kaolinite is the mineral that is derived from the rock called â??Kaolinâ?? and from there, it gets its name. It is also commonly known as â??China Clayâ??. Kaolin is mined from the regions of Gujarat, Rajasthan, Kerala, West Bengal and Jharkhand in India The physical properties of Kaolin include high brightness, non-abrasiveness, poor conductivity of heat and electricity and it has naturally fine particles. Kaolin remains white after calcination due to its refractory properties and can be easily dispersed in water. There are several variations within Kaolin such as Hydrous Kaolin, Metakaolin and Calcined Kaolin. We offer a vast range of Kaolin-based minerals to several businesses from paper manufacturing to porcelain tableware, paints, cosmetics, packaging, rubber and pharmaceuticals to name a few. We customize our minerals according to the needs of the industry of our clients. Hydrous Kaolin has fine particles with plate-like shapes and inertness in terms of chemical reactivity, whereas, Metakaolin is created by the process of calcination of Kaolin. It is a white mineral additive which is most popularly used in cement-based products. In contrast to this, Calcined Kaolin is manufactured by heating the finest natural kaolin to high temperatures in a kiln. This calcination process changes the size and shape of the particles, enhances the whiteness and hardness of the mineral and improves its electrical conductivity. Kaolinite is a clay mineral, with the chemical composition Alâ??Siâ??Oâ??(OH)â?? Various Industrial Usages: Kaolin is a very important mineral in the ceramics industry. Itâ??s high fusion temperature and white firing characteristic makes it perfect to be used in the manufacture of sanitaryware, tableware, floors & tiles and refractories. In the construction industry, kaolin is used to enhance the mechanical properties, porosity and look of several types of cement and concrete. It is also an impeccable source of alumina source in the manufacturing of fiberglass. Kaolin is used in paper manufacturing and fiber-based packaging also. Our Kaolin mineral enhances surface functionality when it is used as fillers or coating pigments and thus further helping in reducing the manufacturing cost of the paper or the packaging. Moreover, it is extensively used in decorative paints formulations as it is a natural opacifier and it is the perfect mineral when high gloss is required. Our specialized Kaolin also can be used as multi-purpose fillers to improve the performance of adhesives, plastics and rubber. We are extremely confident in our offering of Kaolin mineral as we understand how Kaolin can optimize the performance, reduce the costs and can achieve minimum carbon footprint in our clientâ??s end products

Product Description Categories Sweeteners Qty in 20 FCL 9000kg, 11250kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E951 CAS No. 22839-47-0 HS Code 292429 Specification FCC/USP Aspartame is an artificial sweetener, like Acesulfame Potassium, Sucralose, Sodium Saccharin, Sodium Cyclamate and Neotame. It is widely in daily food products to replace sugar. There are too many types of Aspartame in the market, generally are powder 100mesh, Granular 20-60mesh, Fine Granular 60-100mesh, HDP 100-200mesh and Super Fine Powder 300mesh. Weâ??re China Aspartame supplier not only sell Aspartame but also provide manufacturers analysis, market price trends, free samples and also other food additives for mix combined. Aspartame Powder 100mesh Specification Test Item Specification Appearance White Powder Odor/Taste Conforms to Quality Standards Identification Meets Requirements Assay (on dry basis) 98.0% to 102% Loss on Drying 4.5% Residue on Ignition / Sulphated Ash < 0.2% Optical (Specific) Rotation +14.5 and +16.5 Conductivity 30 Scm-1 Transmittance 95% Extraneous Matter Free from material foreign to product pH (0.8% Solution) 4.5 ~6.0 Heavy Metal (as Pb) 10 ppm Lead < 1 ppm Arsenic < 3 ppm Residual Solvents Meets Requirements 5-benzyl-3,6-dioxo-2 Piperazineacetic Acid (DKP) 1.5% Other Related Substances 2.0% USP/NF; 1.5% EP L-phenylalanine 0.5% Solubility Completely Dissolves Particle Size NMT 5% on 100 mesh Bulk Density 0.3 +/- 0.1 g/mL Total Aerobic Plate Count 250 CFU/g Yeast and Mold Count 100 CFU/g Coliforms 3.0 MPN/g Escherichia Coli Negative/g Salmonella Negative/25g

Sorbitol liquid 70%, CAS no.50-70-4, also known as glucitol, manufacturing process from purified glucose as material via hydrogenation refining and concentration. It appears as a colorless liquid, used as a food sweetener. Uses: food-grade liquid sorbitol can also be used as a sweetener in home brewing, cheeses, processed fruit, dried vegetables, fat spreads, and baked goods. Sorbitol liquid is also used in modern cosmetics as a humectant and thickener. Sorbitol is also used in some toothpastes and mouthwashes. As an experienced Sorbitol liquid manufacturer and supplier, we has been supplying and exporting Sorbitol liquid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Categories Sweeteners Qty in 20 FCL 25000kg Min Order 1000kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E420 CAS No. 50-70-4 HS Code 382460 Specification FCC/USP Sorbitol liquid 70% Technical grade Specification Item Specification Our control Appearance Transparent, sweety,viscidity qualified Dry solds,% 69.0-71.0 70.0 Sorbitol content(based on dry basis),% 70.0 70.0 Ph value 5.0-7.5 5.0-7.5 Specific Gravity (Relative density(d2020)) 1.285-1.315 1.285-1.315 Reducing Sugars(based on dry basis),% 0.21 0.15 Total Sugars(based on dry basis),% 8.0 8.0 Residue on ignition,% 0.10 0.10 Refraction Rate 1.4575-1.4620 1.4605 Conductivity Rate 10 s/cm 10 s/cm Heavy metal 5PPM 5PPM Lead(base on pb) 1PPM 0.5PPM As (base on As) 2PPM 1PPM Chlorid(base on Cl) 10PPM 10PPM Sulphate(base on SO4) 50PPM 20PPM Nickel(base on Ni) 2PPM 1PPM Total Aerobic Plate Count 1000cfu/ml ﹤100cfu/ml Yeast &Mold 100cfu/ml 100cfu/ml E-Coli Absent(cfu/g) confirms Salmonella Absent(cfu/25g) confirms assess qualified with the standard (It is a non-crystalline liquid)REMARKS: This product complies with the Standard (according to with the FAO/WHO standard 1988). Fit for human consumption.

Brass made silver plated earring D.code : KRLJ588 Color : Silver Stone : NA Pack contain : 1PAIR EARRING Ideal for : Girls & Women

Brass made silver plated earring D.code : KRLJ588 Color : Silver Stone : NA Pack contain : 1PAIR EARRING Ideal for : Girls & Women

Brass made silver plated earring D.code : KRLJ588 Color : Silver Stone : NA Pack contain : 1PAIR EARRING Ideal for : Girls & Women

Fancy silver plated pedant set Color : Silver Stone : Diamond Pack contain : 1 necklace : 1 pair earring Ideal for : Girls & Women