Kelo-Cote is a patented silicone gel for preventing and treating hypertrophic scars and keloids resulting from surgery, trauma, wounds, or burns. Kelo-Cote is a silicone gel that: - Reduces the redness of scars. - Makes raised scars smoother and flatter. - Relieves the itching and pain of scars. Indications : For the prevention and treatment of hypertrophic scars and keloids resulting from surgery, trauma, wounds, or burns Directions for use : For recent scars: apply to a clean, dry scar once healing is complete or sutures have been removed. Apply a very thin layer of Kelo-Cote to the scar twice a day without massaging. Allow to dry for 5 minutes to form a soft, transparent, water-resistant film - remove excess if the film does not dry. Once dry, it can be covered with sunscreen or makeup. The recommended treatment period is 2-3 months. Continue treatment if improvements are still seen. Content : Tube 6 g
Silicone Fluid is used mainly as an intermediate for the production of a wide variety of products in the chemicals and industries. Fluid is intended for use in a variety of medical applications including; lubricant for plastic or rubber devices and instruments, inert protective coating and water repellent film on the skin, and a hydrophobic surface on glass and ceramic substrates. Silicone Fluid 350 WC Code: 19-122-01 Sales Specifications Appearance: Liquid Visc Cstks (cSt): 332.5- 367.5 HCL PPM (ppm): 0 - 5 WGT Loss (%): 0.5 Max. REF Index @25C: 1.4013- 1.4053 Spec Gravity (g/cm): 0.965- 0.973 D4: < 1000 ppm D5: < 100 ppm Packing 441 lb drum, 4 drums per pallet Silicone Fluid 1000 WC Code: 19-122-02 Sales Specifications Appearance: Liquid Visc Cstks (cSt): 950.0 - 1050.0 HCL PPM (ppm): 0 - 5 WGT Loss (%): 0.5 Max. REF Index @25C: 1.4013-1.4053 Spec Gravity (g/cm): 0.967- 0.975 PPM Silanol (ppm): 0.0 = 600.0 D4: < 1000 ppm D5: < 100 ppm Packing 441 lb drum, 4 drums per pallet
Silicone Dioxide Amorphous is used as filler in rubber products paints animal feeds and insulation materials Its used in printing inks varnishes and in the production of cement and refractory material its used as a precursor in the production of glass and silicon Silicone Dioxide Amorphous is used in sand casting in the production electronic components and works as a component in defoamer Its also used as a sizing agent for the textile industry Sales Specifications Appearance White powder SiO2996 Moisture 009 Loss on ignition 006 Fe2O3001 AI2O3016 Na ppm5 CI ppm5 Density gcm3265 pH7 Whiteness92 Packing 5512 lb bag 40 bags per pallet
Silicone Toilet Brush with Removable Holder TPR brush head - The brush head made of TPR material does not scratch the toilet and does not absorb hair/dirt. It is easy to clean. The special material makes the brush head more durable than conventional brushes, never wear or deform. 360�° thorough cleaning - The round brush head with dense soft bristles can efficiently reach into hard-to-reach areas such as grooves, dead corners or areas under the rim and allow for thorough cleaning. No single corner remains dirty. The handle is made of PP material and is installed rotatable. It is comfortable to catch and easy to disassemble. Quick drying holder - With unique hollow ventilation, the water on the brush head would dry efficiently after cleaning. The drawer design makes it easy to pour the extra water without water leaking or smelling bad due to accumulated water in the holder. Two placement options - The brush head with square base can be placed stably on the floor on the holder. With the included adhesive hook, you can also attach the holder to the wall, keeping the floor and base of the holder dry and tidy. This is not an obstacle when cleaning the floor of the bathroom or toilet. Additional information Weight 0.85 lbs Dimensions 8 x5 x 5 in Type TRP toilet brush with rope Material PP+Aluminum+TPR Color White + Gray Size 11*45cm
PANEL WASHED & GARMENT SILICON WASHED ROUND NECK TSHIRT Price- Rs 250/ PieceGet Latest Price Minimum Order Quantity: 52 Piece Fabric : Cotton Pattern : Printed Size : All Color : Multi color Collar Type : Round Neck Sleeves Type : Half Sleeves Occasion : Casual Wear Fit Type : Regular Fit Brand : Any GSM : 180 GSM
The breaking strength of diamond wire is high and stable; the diamond particles is well distributed and and no agglomeration, to keep the diameter of diamond wire uniform withdifferent diamond density; strongbonding force of plating ,and there's no peeling and cracks; the coating is compact and smooth, the appearance looks silver andbeautiful. Item: Diamond wire Shape:wire Material: Imported C-steel Diameter:55μm-450μm available 24 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 3000000 Kilometers of sawing wire ISO/TS 16949 And ISO9002 certificated
Product index: XJ-201T XJ-201Q Viscosity cst:700000-800000 1000000-1200000 Appearance: Microtransparent milky paste Microtransparent milky paste Specific gravity:1.03-1.05 1.03-1.05 Product features: XJ201T,XJ201Q silicone paste are a paste mixture prepared by thermal condensation of silicone oil with different viscosity (350CST, 1000CST, 60000-10000CST) in different proportions, supplemented by gas phase silica, T functional group, Q functional group silicone and special diffuser at high temperature. When used, it is supplemented by certain thickening agent. Emulsifier, etc., can be made into different uses of defoaming agent. Widely used in printing and dyeing, paper making, ore flotation, paint and so on, featuring fast defoaming speed, good dispersive performance and long foam suppression time.
Defoamer A defoamer or an anti-foaming agent is a chemical additive that reduces and hinders the formation of foam in industrial process liquids. The terms anti-foam agent and defoamer are often used interchangeably. Strictly speaking, defoamers eliminate existing foam and anti-foamers prevent the formation of further foam. Commonly used agents are insoluble oils, polydimethylsiloxanes and other silicones, certain alcohols, stearates and glycols. The additive is used to prevent formation of foam or is added to break a foam already formed. The defoaming agent is resistant to high temperatures, light in color, has good water dispersibility, is not prone to fish eyes and shrinkage cavities, and has no oil slicks or demulsification. It is suitable for all types of coatings and emulsions, water-based resins, and adhesive systems.
Solid and Hollow Silicon/Nonsilicon Polyester Staple Fiber (PSF) Item Types and Grades: 3Dx32mm/51mm/64mm: Type: Solid, Hollow Nonsilicon Grade: Recycle 6D/7Dx32mm/51mm/64mm/76mm: Type: Solid, Hollow Nonsilicon Grade: Recycle 6D/7Dx32mm/51mm/64mm/76mm: Type: Hollow Silicon Grade: Recycle 12D/15Dx32mm/51mm/64mm/76mm: Type: Solid, Hollow Nonsilicon Grade: Recycle 12D/15Dx32mm/51mm/64mm/76mm: Type: Hollow Silicon Grade: Recycle 25D/30Dx64mm: Type: Solid Grade: Recycle Usage: Ideal for a variety of applications, including: Nonwoven fabric Filling for mattresses, jackets, and comforters Spunbonded fabric Soft loft and hard padding Resin bonded fabric
Chemical Propeties: 1.Heat and cold resistant, can work between -50C~+200C in the long run. 2.Viscosity ranging from 5-5 million cs, also insignificant temperature dependence of viscosity. 3.Excellent insulation performance, good water repellent and moisture resistant. 4.Good chemical stability,high resistance to weathering and oxidation conditions. 5.Inert, odorless, tasteless, stainless, and therefore ideal for medical and food applications. 6.Low surface tension, high flash point, low freezing point. Application: 1.Lubricant for rubber, plastic bearing, gear, also for reducing the friction 2.Release agent for plastic forming process, rubber process, metal cast, making paper, etc. 3.Material for making defoamer 4. Surface treating agent for glasses, ceramics, metals 5.Additive agent for paint, rubber, paraffin, resin, etc. 6.Medical defoamer for artificial heart-lung machine and basic pharmaceutics to treating pulmonary edema. 7.Insulating, dustproof and mildewproof coating on glassed, ceramics 8.Finishing agent for textile 9.Basic material of cosmetics, skin care products, hairdressing products 10.Softening agent, water repellent, hand modifier for textile and leather 11.Hydraulic oil, especially in aircraft 12.Material of shaving cream, toothpaste, soap powder, washing powder 13.Heat transfer fluid
Chemical Propeties: 1.Heat and cold resistant, can work between -50C~+200C in the long run. 2.Viscosity ranging from 5-5 million cs, also insignificant temperature dependence of viscosity. 3.Excellent insulation performance, good water repellent and moisture resistant. 4.Good chemical stability, high resistance to weathering and oxidation conditions. 5.Inert, odorless, tasteless, stainless, and therefore ideal for medical and food applications. 6.Low surface tension, high flash point, low freezing point. Application: 1.Lubricant for rubber, plastic bearing, gear, also for reducing the friction 2.Release agent for plastic forming process, rubber process, metal cast, making paper, etc. 3.Material for making defoamer 4. Surface treating agent for glasses, ceramics, metals 5.Additive agent for paint, rubber, paraffin, resin, etc. 6.Medical defoamer for artificial heart-lung machine and basic pharmaceutics to treating pulmonary edema. 7.Insulating, dustproof and mildewproof coating on glassed, ceramics 8.Finishing agent for textile 9.Basic material of cosmetics, skin care products, hairdressing products 10.Softening agent, water repellent, hand modifier for textile and leather 11.Hydraulic oil, especially in aircraft 12.Material of shaving cream, toothpaste, soap powder, washing powder 13.Heat transfer fluid
Silicone Fluid/Silicone Oil Bulk Silicon Fluids are a type of synthetic lubricant made from polydimethylsiloxane (PDMS) and other silicone-based compounds. They are designed to provide superior lubrication, thermal stability, and protection against corrosion and wear due to their low surface tension and high viscosity. Silicon Fluids are often used in the automotive and aerospace industries, as well as in medical devices, because they can withstand extreme temperatures and pressures, and they are non-toxic and non-flammable. Additionally, they provide excellent lubricity and wetting, making them ideal for use in a variety of applications. Types of Silicone Oil/Silicone Fluid for Sale Vinyl Silicone Oil Hydrogen Silicone Oil Hydroxyl Silicone Oil Polydimethylsiloxane (PDMS) Polydimethylsiloxane [(trimethoxysilyl)oxy]-terminated CAS NO.: 142982-20-5 Uses of Medical Silicone Oil/Silicone Fluid BTL silicone fluids are a range of specialty fluids that provide a wide variety of benefits to industrial and consumer applications. These fluids are composed of polydimethylsiloxane, a synthetic form of silicone that is known for its low volatility, low toxicity, and high thermal stability. BTL china silicone fluids including methyl hydrogen silicone oil and hydroxyl silicone oil can be used in a variety of applications, from lubrication to insulation. They are often used as lubricants in machinery and equipment in order to reduce friction and wear. They can also be used as a dielectric medium in electrical and electronic components, providing insulation and preventing electrical shock. In the medical sector, BTL silicone fluids are often used as a carrier for medications and medical ointments. They are also used as a therapeutic aid in the treatment of chronic wounds and burns. BTL silicone fluids can also be used in the food and beverage industry, where they are used as defoamers in beer and soft drink production. They are also used to coat paper and cardboard products, providing water repellency and preventing spoilage.
We deals in the following Chemicals :- Defoamer : Silicone BasedBentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite ClayQuartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica GritsMica Powder, Mica Flakes, Mica Blocks, Mica SheetsDolomite PowderBarite Powder, Barite OreHematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide )Ilmenite (Synthetic Rutile)Fly Ash PowderAlumina Silica ( Cenosphere ) PowderCalcium Carbonate PowderMagnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Ferrosilicon is used as a source of silicon to reduce metals from their oxides and to deoxidize steel and other ferrous alloys. Ferrosilicon is also used for manufacture of silicon, corrosion-resistant and high-temperature-resistant ferrous silicon alloys, and silicon steel for electromotors and transformer cores Origin - India and China Payment Term - LC For price, specification and other details please contact us
Used in casting steel and Iron. Origin - India and China Payment Term - LC . For price, specification and other details please contact us.
Silicon carbide elements are used today in the melting of glass and non-ferrous metal, heat treatment of metals, float glass production, production of ceramics and electronics components, igniters in pilot lights for gas heaters, etc. Origin - India and China For price, specification and other details please contact us.
