1.8V and 2.5V are available.
Material
Housing: LCP with 30% G.F. UL94V-0
Contact: Brass
Latch: Stainless
Finish
Contact: Gold plated on contact and soldering end over 50u" Min. Nickel under-plating.
Latch: 60~100u" Sn only (matte) plating over 50u" Min. Nickel under-plating.
1.LEMO connector, mini connector
2.copy of the lemo connector, but the technist can meet the requirement
3.shell size:0,1,2
The circular electronic connector are designed for the connection between sensors and electronic instruments or equipments .The connector is compact and its push-pull elf-laching connecting system allows the connector to be mated simply
Features
íñ high speed signal transmission
( 13.2mbps, nrz signal )
íñ input ttl compatible
íñ +3~+5v power source
Descriptions
The light transmitting unit is a standard-package product with connector and opto-electric component packaged with led and drive ic. The function of unit changes the electric signal into light signal and be transmitted by plastic fiber.
The unit is operated at single+3v~ +5v and the input signal is ttl compatible. It has a maximum operating speed of 13.2 mbps. The light signal is coupled into plastic fiber by connector. The unit has high performance at low dissipation current, steady light output and efficient light coupling.
Applications
íñ audio equipment
íñ dvd player
íñ pc, notebook
íñ sound card
íñ set top box
2000 pcs
1408 Signal Connector Mini E 2Pin Suppliers
Short on time? Let Signal Connector Mini E 2Pin sellers contact you.
íñ High speed signal transmission
( 13.2Mbps, NRZ signal )
íñ Input TTL compatible
íñ +3~+5V power source
Descriptions
The light transmitting unit is a standard-package product with connector and opto-electric component packaged with LED and drive IC. The function of unit changes the electric signal into light signal and be transmitted by plastic fiber.
The unit is operated at single+3V~ +5V and the input signal is TTL compatible. The TX6112 has a maximum operating speed of 13.2 Mbps. The light signal is coupled into plastic fiber by connector. The unit has high performance at low dissipation current, steady light output and efficient light coupling.
Applications
íñ Audio equipment
íñ DVD player
íñ PC, Notebook
íñ Sound card
Tray 100 100 pcs 13.5*27*3 cm
Inner box 20 tray/box 2000 pcs 29*29*22 cm
Outer box 2 inner box/outer box 4000 pcs 60*31*25.8 cm
Horsin technoloby co,. ltd provides a full range of RF coaxial connectors, from SMP, MMCX, MCX , SMA, SSMA, SMB, SSMB, SMC, SSMC, Mini DIN 4.3-10, Din 7/16, N etc . in the same time ,we are supply alternative IPEX. which supply to do standard products ODM and custom-made products OEM Service. Our main products include High Frequency cable assemblies, Low loss RF coaxial cable assemblies, low PIM jumper cable , RF coaxial connectors, RF coaxial adapters. These products are mainly used in data storage, antenna, networking, communications, automotive, medical,aerospace, military field.
Fiber optic attenuators are devices that reduce signal power in fiber optic links by inducing a fixed 5dB loss
They are used to control the power level of optical signals at the outputs of light sources and electrical to optical (E/O) converters
They are also used to test the linearity and dynamic range of photo sensors and photo detectors
Features:
Wide attenuation range (variable)
Excellent environment stability
Low insertion loss
Precision ceramic ferrule
Compact in size
Simple and reliable structure
Specifications:
Operation wavelength: 1,310Nm and 1,550Nm
Maximum optical input power: 500MW
Return loss:
UPC: 55
APC: 60
Maximum PDI: í_0.1dB
Storage temperature: -40 to 85íµ
Operating temperature: -30 to 75íµ
Type: FC,LC,SC ect. optional
Application:
Telecommunication network
Optical fiber CATV
Measuring instrument
Local area network
Optical fiber sensor
Optical fiber to household
Vinod group of industries estd:1952 are manufacturer & exporter of below mentioned products:
Peforated sheets & coils & related product cable tray etc as per drawings
2 machines x upto 600mm width x upto 1.60mm thickness capacity already installed & running, we can install more machines in case requirement is upto 100 to 200 m.Tons per month.
Copper tubular cable lugs ( w/wo inspection hole for light duty for aluminium conductor )
Crimping type copper tubular cable terminal end ( copper tubular type cable lug w/ inspection hole for copper conductor )
End sealing ferrules crimping type
Wire pin terminal crimping type
Copper ferrules
Material : e copper
Finish : electro tinned.
7) power tranmission / distribution products manufactured are square washers, wire holder pipe mounted, wire holder, assembly for wire holder, insulated cable support strap, mounting bracket for insulated cable. Plate hook etc & any type of electrical / power supply custom made product as per drawings.
8) customised quick connectors (terminal) tin plated
9) split bolt connector made from brass available 10mm2 to 500mm2, full tin
Plated or red copper plated or without any plating. Type : hex or rectangular or square type head or customised as per drawings or sample.
Split bolt connectors are available in mm2, ksu & ks, sol / str series with / without spacer.
Brass post connectors, mechanical lugs, neutral bars / links / connector, compression sleeves
Brand Name :PERLINK
Model Number :BGG.1B.316.CAD60Z
Certification :CE/RoHS
Place of Origin :Shenzhen
MOQ :16
Price :$ 1-10 per/pair
Payment Terms :T/T, Western Union
Supply Ability :23000pcs/month
Delivery Time :3 Days
Packaging Details :plastic + cartons
Humidity :up to 95% at 60° C
Endurance :> 6000 cycles
Current Rating (Amps) :10A
Ingress Protection :IP68
Color :Silver
Shell Finish :Chrome
Shell Material :Brass
Resistance to vibration :10-2000 Hz, 15 g
Shock resistance :100 g, 6 ms
Climatical category :55/175/21
Salt spray corrosion test :> 144h
Working voltage power/signal(AC) :600V , 42V
Connector Type :Plug, Male Pins
Contact Finish Thickness - Mating :39.4µin (1.00µm)
Orientation :G
Environmental Information :RoHS Certfiicate
Product Training Modules :F Series Multi-Pin Connectors
The series products also stand out thanks to a multitude of termination options, which give users the flexibility they need to complete installation in minimal time. This series products the go-to choice for many applications in the medical, test and measurement, industrial, military and security markets.
STRONGER LIGHTER FASTER
1 . 360°screening for full EMC shielding.
2 . Security of the push-pull self-latching system.
3 . Multiple key options to avoid cross mating of similar connectors.
Brand Name :PERLINK
Model Number :BGG.1B.316.WADS62Z
Certification :CE/RoHS
Place of Origin :SHENZHEN
MOQ :6 pcs
Price :$ 1-10 per/pair
Payment Terms :T/T, Western Union
Supply Ability :23000pcs/month
Delivery Time :3 days
Packaging Details :plastic + cartons
Product Training Modules :B Series Multi-Pin Connectors
Environmental Information :RoHS Certfiicate
HTML Datasheet :Unipole, Multipole Catalog
Number of Positions :16
Mounting Type :Free Hanging (In-Line)
Fastening Type :Push-Pull
Orientation :G
Shell Material :Brass
Shell Finish :Chrome
Contact Finish - Mating :Gold
Color :Silver
Ingress Protection :IP50 - Dust Protected
Current Rating (Amps) :10A
Endurance :> 6000 cycles
Humidity :up to 95% at 60° C
Temperature range :- 55° C, +200° C
Resistance to vibration :10-2000 Hz, 15 g
Shock resistance :100 g, 6 ms
Salt spray corrosion test :> 144h
Climatical category :55/175/21
Working voltage power/signal(AC) :600V , 42V;
Insert Material :Polyetheretherketone (PEEK)
Connector Type :Plug, Male Pins
Contact Finish Thickness - Mating :39.4µin (1.00µm)
The series products also stand out thanks to a multitude of termination options, which give users the flexibility they need to complete installation in minimal time. This series products the go-to choice for many applications in the medical, test and measurement, industrial, military and security markets.
STRONGER LIGHTER FASTER
1 . 360°screening for full EMC shielding.
2 . Security of the push-pull self-latching system.
3 . Multiple key options to avoid cross mating of similar connectors.
1. 8 channels of sending, 8 channels of reception;
2. Receive and add current system time;
3. Timing transmission and data can be updated at any time;
4. Receive labeled filtering and interrupt receiving;
5. The baud rate can be set to 10K, 12.5K, 48K, 50K, 100K, 150K;
6. FIFO reset function of sending and receiving, set to receive enable signal;
7. Send FIFO including 511x32BIT , and receive FIFO including (1M-1) Ã?32BIT
8. Standard ARINC429 data format, receiving and sending can be set separately;
Product Description:
ZY32208/32308 interface module which researched and developed according to ARINC429 Bus Communication Agreement is based on buses PXI/CPCI/PCI. The data can be updated at any time, and the word interval, message interval, the predetermined quantity of transmitting messages and the quantity of sent messages can be set up. The modules SCSI-68-pinhole connector makes it easy to operate. The powerful functions of this module can meet users communication testing requirements, and the excellent compatibility is available to all types of system configurations.
1. 8 channels of sending, 8 channels of reception;
2. Receive and add current system time;
3. Timing transmission and data can be updated at any time;
4. Receive labeled filtering and interrupt receiving;
5. The baud rate can be set to 10K, 12.5K, 48K, 50K, 100K, 150K;
6. FIFO reset function of sending and receiving, set to receive enable signal;
7. Send FIFO including 511x32BIT , and receive FIFO including (1M-1) Ã?32BIT
8. Standard ARINC429 data format, receiving and sending can be set separately;
Product Description:
ZY32208/32308 interface module which researched and developed according to ARINC429 Bus Communication Agreement is based on buses PXI/CPCI/PCI. The data can be updated at any time, and the word interval, message interval, the predetermined quantity of transmitting messages and the quantity of sent messages can be set up. The modules SCSI-68-pinhole connector makes it easy to operate. The powerful functions of this module can meet users communication testing requirements, and the excellent compatibility is available to all types of system configurations.
1. 8 channels of sending, 8 channels of reception;
2. Receive and add current system time;
3. Timing transmission and data can be updated at any time;
4. Receive labeled filtering and interrupt receiving;
5. The baud rate can be set to 10K, 12.5K, 48K, 50K, 100K, 150K;
6. FIFO reset function of sending and receiving, set to receive enable signal;
7. Send FIFO including 511x32BIT , and receive FIFO including (1M-1) 32BIT
8. Standard ARINC429 data format, receiving and sending can be set separately;
Product Description:
ZY32208/32308 interface module which researched and developed according to ARINC429 Bus Communication Agreement is based on buses PXI/CPCI/PCI. The data can be updated at any time, and the word interval, message interval, the predetermined quantity of transmitting messages and the quantity of sent messages can be set up. The modules SCSI-68-pinhole connector makes it easy to operate. The powerful functions of this module can meet users communication testing requirements, and the excellent compatibility is available to all types of system configurations.
Thermocouple connectors are specifically designed to allow thermocouples to be quickly connected and disconnected from the extension wire. The connector pair is composed of a male plug and female jack. The male plug will have two pins for single thermocouples and four pins for dual thermocouples. RTD temperature sensors will have three pins. Thermocouple plugs and jacks are manufactured with thermocouple alloys to insure accuracy through out the thermocouple circuit. Thermocouple Type R, S,connectors use compensating alloys.
Thermocouple connectors have two types of pins. The standard sized male plugs have polarized round pins. The polarized pins prevent mismatched connections. Thermocouple connectors can also be ordered in a smaller compact size which are typically called mini thermocouple plugs and jacks. The male mini thermocouple plugs have smaller flat polarized plugs.
Thermocouple plugs and jacks can be ordered in a variety of body materials with various temperature ratings to suite your application. High Purity Alumina Ceramic Thermocouple Connectors are also available for high temperature applications up to 1202°F.
All thermocouple Connectors can be ordered in Type E, J, K, T, R, S, and B thermocouple calibrations and with ANSI or IEC Color Coded bodies.
PHYSICS OF FIBER OPTICS TRAINER is designed to learn basic physics of fiber optics including fiber end preparation. Students can also study the construction of transmitter & receiver to form analog & digital link. Ample number of experiments can be performed with this kit by referring to the exhaustive manuals provided with the kit.
Features:
01. On-board Function Generator.
02. Transmitter : 1 No.
03. Receiver : 2 Nos
04. Fiber Optic Analog Link.
05. Fiber Optic Digital Link.
06. Signal strength indicator.
Technical Specification:
01. Transmitter : 1 No. LED. Peak wavelength of emission 635 nm Red visible.
02. Receiver : 2 Nos. silicon photo detectors
03. Modulation : Intensity modulation.
04. Driver Circuit : Analog and digital configuration for 635 nm LED.
05. Analog Bandwidth : 35KHz.
06. Digital Bandwidth : 50KHz.
07. On-Board Function Generator :
08. Sine Wave &TTL Square Wave :
09. Frequency Range : 1Hz to 10Hz, 10Hz to 100Hz, 100Hz to 1 K H z , 1 K H z t o 10KHz
10. Amplitude : 0 to 4Vpp. (Except Square)
11. Voice Communication : Fiber Optic voice link using dynamic MIC &SPEAKER
12. Signal strength indicator : 8 LED's provided to m e a s u r e o p t i c a l power.
13. Fiber Optic Cable:
14. Type : 1000 micron Step Index, Multimode Plastic Fiber
15. Fiber Lengths : 1&5 Meter.
16. Power Supply : GND, +5V, +12V, -12V at100mAINT.
mmcx female coaxial connector
TYPE MMCX RF Coaxial Connector is a Kind of Microminiature Product Smaller than type MCX.Characteristic impedance is 50.The characteristic of connectors is in Small Volume Light weight Convenient Connection and reliable.They are widely used in Connect with the RF Coaxial Cables, Transmission of RF signal,equipments or small-sized communications Network that are demanding on systematic volume and weight.by using surface mounting technology,MMCX Connector is suitable for mass instrument equipment production and producing on the assembly line.
MMCX Female Right Angle Connector, Jack Female Straight Solder Connector is a kind of MMCX Connector, if you want buy high quality MMCX Connector, you can choose us! Our company is a leader in the industry and we will not disappoint you.
1408 Signal Connector Mini E 2Pin Suppliers
Short on time? Let Signal Connector Mini E 2Pin sellers contact you.
