4WD Mobile Robot with Tracking and Avoidance System-ALSRobotBase
4WD Mobile Robot Kit with Light Tracking System was produced by Harbin Alseon Robotics Technology Co., Ltd.. It is designed according to the control subject of previous Undergraduate Electronic Competition.
4WD Mobile Robot Kit has the light tracking senseor so that it can follow light to move.This 4WD Mobile Robot Kit also have Mini IR Detector sensor module, the module is a distance adjustable sensor. It has high adaptability to ambient light with high accuracy. It comes with transmitter and receiver. this module help mobile car detect obstacles and avoid easily.
Specification:
1. Item Name: 4WD Mobile Robot Kit with Line Tracking and Avoidance System
2. Item Number: RB-13K074
3. Package Weight: 1.5 kg
4. 4WD Mobile Robot Kit Size: 206 mm x 200 mm x 65 mm
Packing List:
1.1 x 4WD Aluminum Mobile Robot Car Chassis
2.1 x CarDuino UNO R3 Microcontroller
3.1 x Sensor Shield V5.0 for CarDuino UNO R3 Controller
4. 1 x L298 Dual H-Bridge Motor Driver
5. 5 x Mini IR Line Tracking Sensor
6. 3 x Mini IR Detector Photoelectric Sensor
7. 10 x 3Pin Jumper Wire
8. 1 x 10 sets M3 * 10 Nylon Standoffs
9. 1 x 10 sets M3 * 20 Nylon Standoffs
10. 1 x 10 sets M3 *8 Mounting Screws
11. 1 x USB Cable A-B for CarDuino Controller
12. 2 x Power Cable
This PIR (Motion) Sensor can detect the infrared signals from human body or other animals and triggers with movement. So it can be applied to a variety of scenarios which require motion detection.Conventional pyroelectric infrared sensors require body pyroelectric infrared detector, integrated chipsets, complex peripheral circuit. So the size is slightly big, circuit is complex, and reliability is slightly lower.We bring this new pyroelectric infrared motion sensor which is specially designed for your Arduino projects, an integrated digital body pyroelectric and infrared sensor, with small size, high reliability, low power consumption, and simple peripheral circuit. Very simple to use in any project.
Specification:
1. Input Voltage: 3.3 ~ 5V, 6V Maximum
2. Working Current: 15uA
3. Working Temperature: -20 ~ 85 ºC
4. Output Voltage: High 3V, low 0V
5. Output Delay Time(High Level): About 2.3 to 3 Seconds
6. Detection angle: 100 °
7. Detection distance: 7 meters
8. Output Indicator LED(When output HIGH, it will be ON)
9. Pin limit current: 100mA
10. Connection Interface: PH2.0-3
ALSRobotBase-Getting Started with Robot Kit-Professional
Getting Started with Robot Kit Professional is a step up from other "Getting Started" kits. This kit allows to create, design and experiment with electronic components, so that you can build your very own robot.
This kit combines mechanics, electronics, software and scientific experiments to create a comprehensive DIY robotics kit. Learn and discover as you piece together the interaction between the controllers, sensor and mechanical parts provided.
This kit is ideal for middle school students and above to learn the basic, professional principles behind electronics, physics, engineering and software programming. Break out of traditional curriculum and get your students learning with interactive curriculum that will serve them in the future, not only exercising teenagers' operational ability, but also developing their imagination and creativity.
For students, it is suitable for engineering practice, graduation design and robotics competitions;
For teachers, it is beneficial to achieve innovative teaching;
For makers, it can achieve the verification of new prototype designs, while meeting all the needs of the metal control, robotics control and DIY control. You will fall in love with it once you assemble it.
Features:
1. The structural components of this kit includes dozens of high-strength aluminum alloy metal structural parts, which are durable and contain die-volume CNC punching mounting holes to ensure precise size.
2. The controller for this kit is based on the world's most popular open source controller Arduino. It features the Atmega328 microprocessor, with 14 digital I / O interfaces, six analog interfaces, a UART integrated sensor expansion board universal pin interface and easy integration.
3. The controller has 32KB Flash memory capacity
4. Supports rewritable capabilities
5. Programming interfaces support mobile phone Micro USB download cable
6. Programming and debugging can be realized in a variety of systems that can interact with a variety of interactive software, such as: Flash, Max / Msp, VVVV, PD, C, Processing, etc.
7. In addition to the suite of sensors this kit includes, it also supports hundreds of different functional sensor modules
8. This kit includes mini-infrared obstacle avoidance sensors, rotation angle potentiometer, crash sensors, sliding potentiometer, big push button modules, LED light module, a buzzer, a voltage detection module, temperature sensors and light sensors.
9. The actuator provides 3 different functions motors. A micro servo positioned 180¡ã, 360¡ã continuous rotation servo steering and a M310 DC motor can be used as a power source of various joint force assembled kit and wheels.
10. You can use the world's most mainstream IDE (Integrated Development Environment) programming software, such as Arduino IDE, Ardublock, Mind +, Scratch, S4A and other software.
11. This kit addresses multiple levels of expertise. Assemble the basic version or take advantage of this professional edition instructions to advance your understanding and incorporate a higher learning program in your classroom.
Packing List:
1. 4 x Aluminum Multi-Purpose Servo Bracket(silver)
2. 1 x Aluminum Long "U" Servo Bracket (silver)
3. 4 x Aluminum Short "U" Servo Bracket
4. 2 x Aluminum Offset Servo Bracket
5. 12 x Aluminum "L" Connector Bracket (silver)
6. 4 x Aluminum alloy bar type bracket A
7. 4 x Aluminum alloy bar type bracket B
8. 6 x Aluminum alloy bar type bracket C
9. 4 x RB-65PG Standard Servo
10. 2 x RB-65CS 360 Degree Rotation Sevro
11. 1 x RF-310 Micro DC Motor
12. 2 x Multi-function Aluminum Foot Plate
13. 12 x Multi-function Aluminum Circular Plate
14. 4 x Multi-function Aluminum Baseboard
15. 3 x Ball Bearing
16. 3 x M3 elastic pad
17. 1 x Mini Fan
18. 3 x 3Pin Jumper Wire
19. 2 x D80mm Rubber Wheel
20. 2 x M1.5*4 screw
21. 8 x M2.5*6 Screw
22. 4 x M2.5*15 Screw
23. 2 x M2.5*6 self tapping screws
24. 2 x M2.5*20 self tapping screws
25. 24 x M3*8 Screw
26. 60 x M3*6 Screw
27. 10 x M3*10 Screw
28. 16 x M4*8 Screw
29. 8 x M2.5 nut
30. 70 x M3 nut
31. 16 x M4 nut
32. 11 x M3*10+6 pillars
33. 16 x M3*25+6 pillars
34. 40 x M3*20+6 pillars
35. 4 x M3*50+6 pillars
36. 8 x M3*5 countersink screw
37. 1 x Mini IR Detector Photoelectric Sensor
38. 1 x Analog Rotation Sensor
39. 1 x Slide Sensor v1.0
40. 2 x Crash Sensor
41. 1 x Digital Push Button
42. 1 x Buzzer module
43. 1 x Analog Voltage Sensor
44. 1 x LED Module
45. 1 x LM35 Temperature Sensor
46. 1 x Light Sensor
47. 1 x Micro USB Cable
48. 1 x 9V/1A Wall Adapter Power Supply
49. 1 x Universal Wheel
50. 1 x 5xAA Battery Holder with DC2.1 Power Jack
51. 1 x StarDuino v1.0 Controller
52. 1 x Acrylic Cover for the StarDuino
53. 1 x High quality plastic rope 50cm
54. 1 x Cross screwdriver
55. 1 x M2.5 Open end wrench
56. 1 x M3.0 Open end wrench
57. 1 x M4.0 Open end wrench
58. 1 x User Guide for Getting Started with Robot Kit
59. 1 x Educational CD-ROM
60. 2 x Subassembly Wrapper
61. 1 x Packing Box
PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or businesses. They are often referred to as PIR, "Passive Infrared", "Pyroelectric", or "IR motion" sensors.
This PIR (Motion) Sensor can detect the infrared signals from human body or other animals and triggers with movement. So it can be applied to a variety of scenarios which require motion detection.Conventional pyroelectric infrared sensors require body pyroelectric infrared detector, integrated chipsets, complex peripheral circuit. So the size is slightly big, circuit is complex, and reliability is slightly lower.We bring this new pyroelectric infrared motion sensor which is specially designed for your Arduino projects, an integrated digital body pyroelectric and infrared sensor, with small size, high reliability, low power consumption, and simple peripheral circuit. Very simple to use in any project.
Specification:
1. Input Voltage: 3.3 ~ 5V, 6V Maximum
2. Working Current: 15uA
3. Working Temperature: -20 ~ 85 ºC
4. Output Voltage: High 3V, low 0V
5. Output Delay Time(High Level): About 2.3 to 3 Seconds
6. Detection angle: 100 °
7. Detection distance: 7 meters
8. Output Indicator LED(When output HIGH, it will be ON)
9. Pin limit current: 100mA
10. Connection Interface: PH2.0-3
Positioning by micrometer head
User can choose location of micrometer head
(Left , Right , Center)
Simple designed 1 axis stage
We can produce same size of stage
by steel by steel/SUS material
We can provide other customizing products.
130722 Robots Spare Parts Suppliers
Short on time? Let Robots Spare Parts sellers contact you.
Positioning by micrometer head
User can choose location of micrometer head (Left , Right , Center)
Precision V-groove rail guide work in stage body
High quality of moving and load capacity
We can provide other customizing products.
Positioning by motion handle
User can choose type of One-side handle type and Both-side handle type
Simple designed with Rack&Pinion type stage
We can provide other customizing products.
Positioning by micrometer head
User can choose location of micrometer head (Left , Right , Center)Simple designed 1 axis stage
We can produce same size of stage by steel by steel/SUS material
We can provide other customizing products.
Positioning by micrometer head
User can choose location of micrometer head (Left , Right , Center)Simple designed 1 axis stage
We can produce same size of stage by steel by steel/SUS material
We can provide other customizing products.
Rotation stage is using it for rotate the load.Use Cross roller Bearing to rotate softly and steady also has a simple controller to set any rotate degree.We can choose Table size variety 40 to 150.Usually use to set the Camera's rotate degree of Vision checking machine or Laser device.
Positioning by motion handle
User can choose rotation center distance (15mm,35mm,51mm)
Simple designed 1,2 axis stage
We can provide other customizing products.
Combine variable stage.
Variable motion combine can possible
ex) XYZ+R+GXY, XY+GXY+R, XY+GX+R, Etc
We can consult to customer most suitable stage unit.
We can provide other customizing products.
