Reinforced Stainless Modular Expansion Joint Suppliers and Manufacturers

Single sphere rubber expansion joint, twin sphere rubber expansion joint, , heavy duty rubber expansion joint with din, bs, en, jis, ansi flanged drilling and twin sphere union rubber expansion joint t with bsp or npt threaded. Size: dn32-dn3000 Material: epdm, nbr, nr, silicon. Pressure: pn6, pn10, pn16, pn25. Connection: din2576, bs4504 pn16, jis10k, ansi b16.5 flange;bsp, npt thread Cartons and cases

1, Product Information: ZHWs expansion bellows Series EBF521 can withstand extreme variations in temperature ranging from very low to high temperatures i.e. from Cryogenic up to 600 °C. Stainless steel bellows are diffusion tight, have an excellent chemical resistance as well as high physical strength. On top of it, stainless steel bellows have very good corrosion characteristics. United Flexible bellows and expansion joints are generally produced and assembled in sizes from nominal 40 mm (1-1/2�) up to nominal 2000 mm (0�). 2, Product Applications: Decreasing vibration of rotating parts, the joints can be used in pressure system, pump, motor, machine equipment, compressors, industrial pipeline construction, gas and water transportation pipeline. 3, Product Features: Reasonable structure, good elasticity, large range of compensation pipeline and little counterforce to the brackets of pipeline. Shock absorption and noise decrease, heat and dust insulation, environmental protection and simple structure bracket. The displacement can be deflected to prevent damagment caused by subsidence of connected brackets and equipment base. It can adapt itself to the centrifugal difference of pipeline installation to provide convenience to installation and maintenance. Good resistance to milling, heat, aging and corrosiveness and long service life. Little resistance and little weight. Each performance is better than the compensation device of other materials. The temperature range of media is wide:-40--300°c.

Material: SS304/316. Size: DN80-DN3000. Tempreture: -20centigrade degree - 270centigrade degree. Pressure: PN16/PN40. Type: flange. Gasket: EPDM,NBR. Applicable media: sea water, drinking water, slurry, industrial sewage.

The stainless steel expansion joints is a flexible, thin-walled, transversely corrugated device with telescopic function. It is composed of a metal bellows and components. The working principle of the bellows is mainly to use its own elastic deformation function to compensate the axial, angular, lateral and combined displacements of the pipeline due to thermal deformation, mechanical deformation and various mechanical vibrations. The compensation function is resistant to The functions of pressure, sealing, corrosion resistance, temperature resistance, impact resistance, vibration reduction and noise reduction can reduce pipeline deformation and increase pipeline service life. The stainless steel bellows is widely used in automatic control and measuring instruments, vacuum technology, machinery industry, electric power industry, transportation and atomic energy industry as sensitive components, damping components, compensation components, sealing components, valve components and pipeline connectors. And other fields.

The Expansion joints Material is 0Cr18Ni9,size 276x155,it used in ferroalloy furnace, ferrosilicon furnace, calcium carbide furnace

Material: SS304/316. Size: DN80-DN3000. Tempreture: -20centigrade degree - 270centigrade degree. Pressure: PN16/PN40. Type: flange. Gasket: EPDM,NBR. Applicable media: sea water, drinking water, slurry, industrial sewage.

GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services. Safe and reliable High quality li-ion cell for mobile use Laser welding connection with high strength and low impedance Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation Damping pad design to improve the impact resistance of the system IP54 safe and reliable operation in outdoor environment Serially designed PCS and battery pack eliminates circulating current and improve system reliability. Integrated BMS,DC, AC multi-layer protection, maximum safety performance design Efficient and Convenient Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion Easy access to PV and diesel generator, intelligent muli-energy management. Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring Multi systems could be connected in parallel Cost optimization One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc. Small size, light weight, less space and installation cost Long cycle life, low failure rate, reduce operation and maintenance investment Maximize green energy utilization. Rated output power: 150KW Rated energy: 225KWH

Connecting rod, con rod.

Expansion joint,Expansion joint Supplier Size : DN50~DN1000  Pressure : Max 4.0 Mpa  Bellows : Carbon Steel / Stainless Steel  Other parts : Carbon Steel / Stainless Steel

Manufacture all type of metal bellows made from stainless steel grades. We manufacture both circular and ducting square/rectangular bellows as per customer requirement.

Expansion joints used on ships(DN100mm) 1.DN: 8mm-10000mm 2.Material: Carbon steel, Titanium, Zirconium, Hastelloy, Nickel alloys, Duplex Steel and Austenitic Stainless Steel 3.Thickness: 0.15mm-70mm 4.Forming method: Hydraulic forming 5.Pressure(MPa):-10 to +10 6.shape: U V 7.Temp.(oC): -196 to 1400. Name Nominal diameter DN(mm) Plies Forming method Convolutions Pressure (Mpa) shape Temp. () Bellows for pressure vessel ¦µ150-¦µ4500 1-6 Hydraulic forming 1-4 -10 to +10 U ¦¸ -100 to 1250 Bellows expansion joint ¦µ8-¦µ10000 1-70 Hydraulic forming Roll forming 1-16 -10 to +10 U ¦¸ V -196 to 1400 With insulation sleeve Rectangular expansion joint(fabric) Any dimension 3-10 Press-brake forming 1-4 -0.2 to +0.2 U. Wooden case.

Product Features of Rubber Expansion Joint To provide stress relief in ducting system by absorbing any difference in dimension caused by thermal change. To protect equipment by reducing equipment vibration. To provide simple connection of misaligned pipes. Accommodate expansion and contraction movement in axial, lateral and angular direction. Prevent the propagation of electricity Dampen sound transmission Materials Rubber : Neoprene, Nitrile, EPDM, Natural, Butyl, Hypalon, Silicone, SBR, Flurocarbon rubber Fabrics : Canvas, Rayan, Polyester, Nylon, Glass Fabric Metal Flanges : Stainless Steel, MS, Aluminium Type, Size and Pressure Rating Type : Single arch type, multi arch type, sleeve, Joint type, Enlarge Flange type, wide arch type. Size : 50 to 3000 mm Pressure (base on dia) : Upto 25 kg/cm2 Permissible movement : Axial (compression) - upto 200 mm Axial (elongation) - upto 75 mm Transverse - upto 75 mm Face to Face length : 50 to 700 mm

Stainless Steel: ASTM A182 F304/304L/ 304H/316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904L etc. Carbon Steel: ASTM A105/A694/F42/46/52/56/60/65/70/A350 LF3/A350 LF2, etc. Alloy Steel: ASTM A182 F1/ F5/ F9/ F11/ F22/F91 etc. Others: Monel, Nickel, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, Aluminium, High Speed Steel, Zinc, Lead, etc. Types: Weld neck, Slip-on, Blind, Socket Weld, Lap Joint, Spectacles, Ring. Joint, Long Weld neck, Deck Flange, etc. Size: 1/2 NB TO 24 NB. Class: 150#, 300#, 400#, 600#, 900#, 1500# & 2500.

Threaded Flange offered can be made available by us in options of different finish sizes of 1/2 to 6 as well as per industry standards like ASTM, DIN, BS. Further, these flanges are offered in carbon steel/stainless steel metal finish and can be made available in surface finish choices of rust-proof oil, galvanized coating varnish and others. Some of its features include suitable for the connection of all kinds of pipeline used in conveying of water, steam, air, gas and oil; available in finish type options of welding neck, slip-on, socket weld, lap joint, threaded, long welding neck and others. Product Details: Size: 1/2 6 NB Standard: ASTM/DIN/BS, etc.,

Expansion joint Expansion joint can also be called pipe expansion joint, compensator, expansion. Expansion joint is divided into: corrugated expansion joint, sleeve expansion joint, square natural compensation expansion joint and other major types, 1. Compensation for expansion deformation caused by heating of absorption pipeline in axial, lateral and angular directions. 2. Absorb equipment vibration to reduce the influence of equipment vibration on pipeline. 3. The amount of deformation of pipelines by absorbing earthquake and subsidence. Because of the heat expansion and cold contraction of the pipe, so for the pipe, it is necessary to produce the stress and push tension of the pipe wall; The stress on the wall of the pipe affects the strength of the pipe, and the push and pull force increases. The fixed bracket of the pipe should be made large to withstand the push and pull force generated by the pipe expansion. Therefore, the variable opening method compensated by the ductile iron pipe mechanical joint fittings is used to reduce the stress and thrust of the pipe wall. The expansion joint is mainly used to compensate the expansion deformation caused by the temperature change of the pipeline, and also to compensate the length of the pipeline due to the installation and adjustment. It is mainly divided into three structural forms: wholesale elbow expansion joint, bellows expansion joint and casing expansion joint.

FUSTAR Corrugated Pipe Co,.Ltd is one of the leading manufacturers of expansion joints and metallic bellows. We design and manufacture Universal(axial) Expansion Joints according to EJMA standard and optimization design. With over 10 years of experience in the design and manufacture of bellows expansion joint combined with our state of the art on-site facilities enables us to offer a wide range of bellows suitable for any application and design requirements. Flange Connection  It is very common to apply any standard and shape flanges to any size expansion joints for simple installation and replacement. We can follow ANSI, DIN, JIS and GB standard of flanges on different pressure grade, pressure from 0-5.0Mpa and diameter from DN15-DN8000mm in all different material following customersâ?? requirements. Any other special shape flanges can also be customizable. Welded Connection  It is also a simple and economical connection type in project pipelines. Any matched pipe can be welded together with the bellows applied to pipe system. Diameter can start from DN10mm to DN10000mm and material can be carbon steel and all stainless steel including AISI304, AISI321, AISI316, AISI316L, Features Absorbs small amounts of axial, lateral, and angular movements Deflect in any direction Most economical Must be guided Requires main and directional anchors Data of Expansion Joint The designed pressure for this expansion joint is 1.0Mpa(or 1.6Mpa,2.0Mpa,2.5Mpa, 4.0Mpa), which can be customized in case of special requirements. â?¢ Model: DN15-DN8000, â?¢ Pressure: 0.1Mpa-4.0Mpa â?¢ Connection: 1, Flange-connecting 2, Pipe-connecting â?¢ Axial Compensation: 18mm-400mm â?¢ Standardï¼?GB/T12777-2008  â?¢ Working Temperatureï¼?ï¼?196â??ï½?450â?? Application Our products are widely applied to industrial equipment manufacture and engineering pipe connection of aerospace, marine, petrochemical, refining, power plants, temperature control, information industry, heating, to effectively ensure the high safety performance of transporting the toxic, flammable and explosive media in the pressure pipeline, and to avoid the leak pollution causing the pollution of marine, sky, plants and other environment pollution. The product characteristics are thermostability, high pressure resisting, corrosion resisting, fatigue resisting, resistant to use.

Single sphere connectors, twin sphere connectors, rubber expansion joints, flexible joints.Manufacturer /oem

Expansion joints including metal, rubber and also fabric. Metal bellows and also metal flexible hose..