Second Quality Railway Steel HMS2 R50/R65 CODE 730 210 000 000 The rails are brand new and only called used rails because of their anomalous sizes. The rails are cut in different sizes, as they did not pass the test of conformity of measurements due to inequalities. Therefore, rails are not suitable as railway track, but not classified as scrap. we can also provied : rebar steel hot rolled steel sheets Galvanized steel billet steel cold steel Rolled sheets procedure : 1/ Buyer send LOI to the seller. LOI must be from the end buyer and indicates inside the payment method chosen below. 2/Seller issues FCO (available 7 days) 3/Buyer signs FCO and accepts fees proforma invoice indicates all the transaction details agreed after in the SPA and it's the document needed by buyer when start the processus for issuing the deal. 4/Buyer pays fees 1340 $ per ONE million ton to the seller to issu a commercial invoice, please note this amount is refundable after acceptance of the LC by the seller's bank. 5/Paiement terms : By issuing a confirmed LC MT 700 with full amount (confirmed, not delay and irrevocable), as per the proforma invoice�¢??s terms and conditions by the buyer. or issuing a revolving LC MT 760 with the bank guarantee to take all the quantity states on the proforma invoice has to be not less than 20 % of the value of the proforma invoice. Possibility to negociate with DLC. 6/ Seller issues a SPA the buyer must be returned ywith 7 days. 7/ in case of requesting any documents, inspection certificate, etc. property rights, inspection of the goods, requesting a visit or video, the buyer can claim them by sending pre-advice bank draft MT 705, OR among the conditions of the letter of bank credit, confirmed bank, with the full value of the proforma invoice and its conditions
HS Code 73021090 PRICE = US$ 250 CIF ORIGIN: SOUTH AFRICA MIN ORDER: 200 TONS PACKAGE: CONTAINERS Standard & Grade 100% Used Rail (R50-R65) with specifications as per mentioned below:. CHEMICAL COMPOSITION: C 0.54 0.82 Si 0.18 0.40 Mn 0.60 1.05 S 0.04 max P 0.035 max As 0.01 max of Mass share Norms R-50 GOST-7173-75 and R-65 GOST-8165-75 R50 (51.67 KG/M) GOST 7173-75 R65 (64.72 KG/M) GOST 8165-75 These scraps consist of R50-R65 of Rails as R50 (51.67Kg/M Gost-7173-75), R65 (64.72Kg/M Gost-8165-75) According to Incoterm 2000. The Rails shall conform to ISRI CODE R50-R65 and will be Used Rail Steel Scrap- Standard section Rails. Materials will be, free from Mud, Dust, Fluff, Non-Ferrous inclusion, excessive rust, and other impurities. Free from any substance and coatings any organic waste and other harmful substances. Dirt, Dust Rust fluff and other immunity not allowed.
We have more than 200,000 MT per month x 12 Origin: KSAShipping terms: CIF to ASWP Price $180-250/MT Payment terms: LC with 2% PB from seller or DLC 50000 =220 $ spot 100000= 240$ spot contract Lareg Qy 155- 180 $ No advance payments Dealing Bank to Bank ProceduresLOI Financial ability after you can view the goods directly or direct agent Within the conditions Seller establishes 20 penalty clause in the absence of goods #used rail #r50-r65
We can supply big quantities of used rails Only to end buyers.
Product Description R50-R60: used long rail steel scrap in compliance with ISRI standard classification R50 (51.67 kg/m), Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switches, and guard rails, or rails with split rail. Price of product ( USD price or FOB price) : USD 250 - 260 per MT Product origin : Europe Key Specifications/Special Features : Nominal Chemical Composition. Carbon (C) 0.20% to 0.60% Manganese (Mn) 0.60% to 0.90% ... Nominal Specification for R50 51.67 kg/m GOST 7173-75. Carbon (C) 0.40% to 0.58% Manganese (Mn) 0.75% to 0.88% ... Nominal Specification for R65 64.72 kg/m GOST 8165-75. Carbon (C) 0.40% to 0.58% Manganese (Mn) 0.75% to 0.8" Minimum Order Size and Packaging details : 12500 MT
R50/r65 Used Rails Scrap..
SPECIFICATIONS: the following Percentage Points: Chemical Composition Carbon - 0.54 to 0.82% Phosphorus - 0.035% max Manganese - 0.60 to 1.05% As. - 0,01max of Mass share Silicone - 0.18 to 0.40% Sulphur - 0.035% max Norms - R-50 GOST-7173-75 / R-65 GOST- 8165-75 The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m) Used Rails shall be considered free of alloys when the residual alloying elements do not exceed Cut to 1.5 meter length (standard) 1. Technical terms: USED RAIL R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press
We can Supply Used Rail R-50-65. PRICE : USD 250/MT PAYMENT: 100% LC , MINIMUM ORDER QUANTITY 1.20 MILLION METRIC TON.
USED RAILS R50/R60/R65 used rails . Our rails are tested and reported by the highest inspection companies and affirmed to be free from any toxic or dangerous substances USED RAILS R50/R60/R65 SPECIFICATIONS SECOND QUALITY-RAILWAY USED RAIL STEEL NO. 1. STANDARD SECTION TEE RAILS, ORIGINAL WEIGHT 50 POUNDS PER YARD, OVER HEAVIER,RAILS â?? STEEL NO. 2. CROPPED RAIL ENDS, STANDARD SECTION, ORIGINAL WEIGHT 50 POUND PER YARD AND OVER 12.50 METERS LONG (28C) RAIL STEEL NO.2 T RAIL ENDS STANDARD SECTION ORIGINAL WEIGHT 50 POUNDS PER YARD AND OVER 12.50 POUNDS PER YARD AND OVER 12.50 METERS RAIL, STEEL NO.3, STANDARD SECTION FEE, GENDER, AND / OR GUARD RAILS, FREE FROM FROG AND SWITCH RAILS NOT CUT APART, AND CONTAIN NO MANGANESE, CAST, WELDS OR ATTACHMENT ANY KIND EXCEPT ANGLE BARS ALSO RAILS, NOT FOUND AND WITHOUT RADIATION AND EXPLOSIVE SUBSTANCE... (1,0-1.5 -2,0 -2,5 -2,8 Meter) (R 50/ R65 ) CHEMICAL COMPOSITION SHALL BE ACCORDING TO BELOW TABLE ORIGIN Saudi Arabia. QUANTITIES Total quantity of contract minimum 1,000,000 MT. MOQ for trial orders is 200,000 MT. SPECIFICATIONSâ??: Second Quality Railway Used â?? R50-R65, AQSIQ certified for China import. Shippingâ??: Global Delivery. Flexible monthly deliveries starting from 200,000 MT PRICEâ??: CIF â??PAYMENT TERMS: â??L/C, Confirmed MT700 at sight. The L/C has to be with full value of seller commercial invoices and its conditions. For getting accurate pricing information, please provide total and monthly quantities needed (MT) and the destination country of deliveries. Conditions : Commercial invoice will be sent (seller)by swift to the buyer bank,after the buyer accepts FCO. Seller pledges,and undertakes to issue a bank guarantee of 24 million USD or 20% of the value of the goods sold to the buyer who opens ( L/C ) MT 700 at Sight with full conditions of the commercial invoice . This will serve as a penalty in case of non-fulfillment or delay in delivery or non-arrival of the goods to the customer port. This guarantee will be in favour of the buyer immediately after 45 days without reference to it, after the arrival of the l/C from the official bank email, with a serial number ,issued by the Saudi swift system which is accept to us . Deal Procedures Send an official ICPO (buyer) Send the official FCO (seller) Accepting FCO (buyer) Sending invoices + sealed and signed contract to the buyer (seller) Open Confirmed Letter of Credit (Buyer) Guarantee of good implementation 24 million USD (seller) Starting the supply within seven days (seller)
Railroad rails of various lengths, weights and configurations. Rails can include all chemistry grades (carbon or alloy), and may have joint bars, bolts and rail anchors attached. Free from concrete, dirt, and foreign material of any kind.
Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press
Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press
Specification R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building Standard ASTM Grade Q235B Rail Heigth 120mm Bottom Width 120mm Web Thickness 28mm Head Width 70mm Length 6m Place of Origin China Zhejiang Brand Name zhongding Type Heavy Rail Application Railway Rail Weight QU70 Secondary Or Not Non-secondary Tolerance �±5% Alloy Or Not Non-Alloy Delivery Time 15-21 days Technique Hot Rollled Material Q235 Length 6m-12m production mode forge and press
Scrap like r50, r65 used rails scrap.
Original R-50 R-65 Tee rails weighing 50 pounds per yard or more, 6 meters long and more Nominal Specification for R50 â?? 51.67 kg/m GOST 7173-75 Nominal Specification for R65 â?? 64.72 kg/m GOST 8165-75 Nominal Chemical Composition Carbon (C) 0.20% to 0.60% Manganese (Mn) 0.60% to 0.90% Silicon (Si) 0.15% to 0.35% Sulphur (S) 0.05% to Maximum Phosphorous (P) 0.05% to Maximum Arsenic (Ar) 0.15% to Maximum
Chemical Composition Rail R50 (Gost7173-75) and R65 (Gost-8165-75) International Standards as follows : R50 -51.67 kg/m GOST 7173-75 C: 0.54 - 0.82 % Mn: 0.60 - 1.05 % Si: 0.18% - 0.40% ; P: 0.035 % S: max. 0.045 % As: 0.01 % Mix of Mass Share R65 - 64.72 kg/m GOST 8165-75 C: 0.54 - 0.82% Mn: 0.60 - 1.05% Si: 0.18% - 0.40% ; P: 0.035 % S: max. 0.045 % As: 0.01 % Mix of Mass share. Origin: Saudi Arabia.
Product Description : Specifications Of Railways: R50/R60/R65: -Second Quality-railway Used -Rail Steel No. 1. Standard Section Tee Rails, Original Weight 50 Pounds Per Yard, Over Heavier, 120.50 M Rails. -Steel No. 2. Cropped Rail Ends, Standard Section, Original Weight 50 Pound Per Yard And Over 12.50 Meters Long. -28)b) (28c) Rail - Steel No.2 T - Rail Ends Standard Section - Original Weight 50 Pounds Per Yard And Over 12.50 Pounds Per Yard And Over 12.50 Meters - Rail, Steel No.3, Standard Section Fee, Gender, And / Or Guard Rails, Free From Frog And Switch Rails Not Cut Apart, And Contain No Manganese, Cast, Welds Or Attachment Any Kind Except Angle Bars Also Rails, Not Found And Without Radiation And Explosive Substance... -1.0m ( 1.0 ? 1.5m( Rail Ferrous -(R50/ R65 ) Chemical Composition Shall Be According To R65 GOST 8165.75 WEIGHT 64.72 KG /Meter C = 0.54 % _ 0.82% SI = 0.18 _ 0.40% MN = 0.60 _ 1.05% S = 0.04% _ MAX P = 0.035% AS - 0.01 MIX OF MASS SHARE R50 GOST 7173.75 WEIGHT 51.67 KG /METER C = 0.54 % _ 0.82% SI = 0.18 _ 0.40% MN = 0.60 _ 1.05% S = 0.04% _ MAX -P = 0.035% AS - 0.01 MIX OF MASS SHARE Product origin ; Saudi Arabia Key Specifications/Special Features ; Second Quality R50-R65 Minimum Order Size and Packaging details : Total Quantity minimum 500,000 MT total, Bulk
HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap Backed by huge industry knowledge, we are presenting a supreme quality range of HMS Scrap (1 & 2) to our highly valued consumers. These range of HMS Scrap are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each and every product before release by various industrial parameters by our quality analyst. Client purchase these at reasonable rate. Payment : TT
We can supply used rail R50 and R65 Composition: C - 0.54-0.82 %, SI -0.18-0.40%, MN - 0.60-1.05%, S - 0.04% maximum P - 0.035% maximum AS: 0.01% maximum of mass share 1. Technical terms: used rail R50-R65 2. Specifications and Chemical Composition: Used Rail: R50 (51.67KG/Meter, GOST 7173-55), Used Rail: R65 (64.72KG/Meter, GOST 8161-75). Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyer's instruction; Expenses on seller Width: 5.5 inches ; Weight: 64.72Kg. No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight. No pitting. Only atmospheric rust. No heavy rust. It is mandatory that rails must be cut into length 1.5 meter (max.) before shipment.
