Double Shaft without Pin stem butterfly valves are popular and meet many markets Design to comply with MSS SP-67, BS5155 and API 609 Compatible with ANSI, DIN, JIS flanges Size range: handles (1 1/2 to 12 inches), manual gear operators (1 1/2 to 48 inches) Pressure: from PN0.6MPa to PN1.6MPa Medium: acids, alkalis and salts Materials list: Body materials: cast iron, ductile iron and stainless steel Disc: Ductile Iron (with PTFE Coated) Seat: PTFE Shaft: SS410, SS416 Pin: SS316 O ring: NBR, EPDM, neoprene and viton Bushing: PTFE, nylon and lubricated bronze
Gland packing: expanded graphite packing, die-formed graphite ring, carbon fiber packing, aramid fiber packing, kevlar packing, white ptfe packing, chinese gfo packing, vegetable fiber packing, ramie/fax fiber packing, cotton packing, arcylic fiber packing, gasket : spiral wound gasket, double metal jacketed gasket, ptfe enveloped gasket, kamprofile gasket, ring joint gasket, corrugated metal gasket, serrated (grooved) gasket, metal O rings, PTFE gasket, copper gasket, gasket sheet material: expanded graphite sheet/roll, non-asbestos sheet, ptfe sheet, mica sheet, ceramic fiber paper, mineral wool, rubber sheet, rubber cork sheet, asbestos sheet, asbestos rubber sheet, asbestos beater sheet, oil-resisting asbestos rubber sheet, packing material: expanded graphite yarn( reinforced by cotton, fiberglass, carbon fiber), carbonized fiber yarn(impregnation with ptfe), spun carboni.
PP Camlock coupling (cam and groove quick coupling) specifications Standard of our PP cam and groove coupling: • Our camlock coupling are made to standard of A-A-59326 (previously called MIL-C-27487) or DIN 2828. Casting method of our PP camlock coupling: • Injection Specification of our PP camlock couplings: • Sizes available: from 1/2" to 4" • Types available: A, B, C, D, DC, DP, E, F Body material of our PP kamlock fitting • Polypropylene Cam levers of our PP camlock fitting: • We use stainless steel cam levers. Pins, Rings and Safety clips of our SS kamlock: • We use stainless steel Pins, steel plated rings and Safety clips. (Note: Safety clips are only available when required by the client, the client have to pay additional if need safety clips) Sealings of our acoples rapidos kamlock en polipropileno: • NBR • EPDM • Viton • PTFE envelop gasket • Other materials are available on request. Threads of our racores camlock en polipropileno: • NPT • BSP (We usually make the female thread parallel BSPP, male thread tapered BSPT) We mainly supply camlock couplings (cam & groove quick couplings), guillemin coupling, TW coupling, Bauer type coupling, chicago coupling, Ground joint coupling, sandblast coupling, King combination nipple, DIN2817 safety clamp, T-bolt superior clamp, double bolt clamp, whipcheck safety cable, washdown gun, etc. OEM service is also one of our main business.
BR Camlock coupling (cam and groove quick coupling) specifications Standard of our BR cam and groove coupling: • Our camlock coupling are made to standard of A-A-59326 (previously called MIL-C-27487) or DIN 2828. Casting method of our BR camlock coupling: • Sand casting Specification of our BR camlock couplings: • Sizes available: from 1/2" to 6" • Types available: A, B, C, D, DC, DP, E, F Body material of our BR kamlock fitting • Brass Cam levers of our BR camlock fitting: • We use stainless steel cam levers or brass cam levers. Pins, Rings and Safety clips of our BR kamlock: • We use steel plated Pins, Rings and Safety clips. (Note: Safety clips are only available when required by the client, the client have to pay additional if need safety clips) Sealings of our acoples rapidos kamlock en laton: • NBR • EPDM • Viton • PTFE envelop gasket • Other materials are available on request. Threads of our racores camlock en laton: • NPT • BSP (We usually make the female thread parallel BSPP, male thread tapered BSPT) We mainly supply camlock couplings (cam & groove quick couplings), guillemin coupling, TW coupling, Bauer type coupling, chicago coupling, Ground joint coupling, sandblast coupling, King combination nipple, DIN2817 safety clamp, T-bolt superior clamp, double bolt clamp, whipcheck safety cable, washdown gun, etc.
AL Camlock coupling (cam and groove quick coupling) specifications Standard of our AL cam and groove coupling: • Our camlock coupling are made to standard of A-A-59326 (previously called MIL-C-27487) or DIN 2828. Casting method of our AL camlock coupling: • Gravity casting Specification of our AL camlock couplings: • Sizes available: from 1/2" to 8" • Types available: A, B, C, D, DC, DP, E, F Body material of our AL kamlock fitting • Aluminium A356 or A104 Cam levers of our AL camlock fitting: • We use stainless steel cam levers or brass cam levers. Pins, Rings and Safety clips of our AL kamlock: • We use steel plated pins, steel plated rings and Safety clips. (Note: Safety clips are only available when required by the client, the client have to pay additional if need safety clips) Sealings of our acoples rapidos kamlock en aluminio: • NBR • EPDM • Viton • PTFE envelop gasket • Other materials are available on request. Threads of our racores camlock en aluminio: • NPT • BSP (We usually make the female thread parallel BSPP, male thread tapered BSPT) We mainly supply camlock couplings (cam & groove quick couplings), guillemin coupling, TW coupling, Bauer type coupling, chicago coupling, Ground joint coupling, sandblast coupling, King combination nipple, DIN2817 safety clamp, T-bolt superior clamp, double bolt clamp, whipcheck safety cable, washdown gun, etc. OEM service is also one of our main business.
SS Camlock coupling (cam and groove quick coupling) specifications: Standard of our SS cam and groove coupling: • Our camlock coupling are made to standard of A-A-59326 (previously called MIL-C-27487) or DIN 2828. Casting method of our SS camlock coupling: • Investment casting Specification of our SS camlock couplings: • Sizes available: from 1/2" to 6" • Types available: A, B, C, D, DC, DP, E, F Body material of our SS kamlock fitting • CF8M casting (SS316) • CF8 casting (SS304) • Other material are available on request Cam levers of our SS camlock fitting: • We use stainless steel cam levers. Pins, Rings and Safety clips of our SS kamlock: • We use stainless steel Pins, Rings and Safety clips. (Note: Safety clips are only available when required by the client, the client have to pay additional if need safety clips) Sealings of our acoples rapidos kamlock en acero inoxidable: • NBR • EPDM • Viton • PTFE envelop gasket • Other materials are available on request. Threads of our racores camlock en acero inoxidable: • NPT • BSP (We usually make the female thread parallel BSPP, male thread tapered BSPT). We mainly supply camlock couplings (cam & groove quick couplings), guillemin coupling, TW coupling, Bauer type coupling, chicago coupling, Ground joint coupling, sandblast coupling, King combination nipple, DIN2817 safety clamp, T-bolt superior clamp, double bolt clamp, whipcheck safety cable, washdown gun, etc. OEM service is also one of our main business.
AL Camlock coupling (cam and groove quick coupling) specifications Standard of our AL cam and groove coupling: • Our camlock coupling are made to standard of A-A-59326 (previously called MIL-C-27487) or DIN 2828. Casting method of our AL camlock coupling: • Gravity casting Specification of our AL camlock couplings: • Sizes available: from 1/2" to 8" • Types available: A, B, C, D, DC, DP, E, F Body material of our AL kamlock fitting • Aluminium A356 or A104 Cam levers of our AL camlock fitting: • We use stainless steel cam levers or brass cam levers. Pins, Rings and Safety clips of our AL kamlock: • We use steel plated pins, steel plated rings and Safety clips. (Note: Safety clips are only available when required by the client, the client have to pay additional if need safety clips) Sealings of our acoples rapidos kamlock en aluminio: • NBR • EPDM • Viton • PTFE envelop gasket • Other materials are available on request. Threads of our racores camlock en aluminio: • NPT • BSP (We usually make the female thread parallel BSPP, male thread tapered BSPT) We mainly supply camlock couplings (cam & groove quick couplings), guillemin coupling, TW coupling, Bauer type coupling, chicago coupling, Ground joint coupling, sandblast coupling, King combination nipple, DIN2817 safety clamp, T-bolt superior clamp, double bolt clamp, whipcheck safety cable, washdown gun, etc. OEM service is also one of our main business.
Wholesale plug Price: ($0.39) White acrylic double flared plug with black skull pattern in the center * Certification of Silver and Gold contents of Body Jewellery Shipping Methods : UPS l FedEx l EMS l DHL -- Acha Co, Ltd Buy wholesale body jewellery from straight from our Thailand factory, we manufacture and distribute piercings worldwide, instant shipping to any country. Wholesale body jewellery online catalogue, all available in stock, sterling silver earrings, eyebrow bars, nose studs, lip rings, tongue piercings, nipple rings, belly bars, plugs, silver rings, titanium rings. Wholesale body jewellery at the best prices in the market. GAUGE 3mm/8g $0.39 4mm/6g $0.39 5mm/4g $0.39
Wholesale plug Price: ($0.39) Solid acrylic double flared plug with blue and white pinwheel pattern * Certification of Silver and Gold contents of Body Jewellery Shipping Methods : UPS l FedEx l EMS l DHL -- Acha Co, Ltd Buy wholesale body jewellery from straight from our Thailand factory, we manufacture and distribute piercings worldwide, instant shipping to any country. Wholesale body jewellery online catalogue, all available in stock, sterling silver earrings, eyebrow bars, nose studs, lip rings, tongue piercings, nipple rings, belly bars, plugs, silver rings, titanium rings. Wholesale body jewellery at the best prices in the market. GAUGE 3mm/8g $0.39 4mm/6g $0.39 5mm/4g $0.39 6mm/2g $0.39 8mm-5/16'' $0.48 10mm-3/8" $0.48
The axial angular contact ball bearings, for screw mounting the complete units are consisted of a single-piece outer ring, a two-piece inner ring, balls, cage assemblies and seals. Bearings are double direction angular contact ball bearings with a 60 contact angle in an O arrangement. Features: - can support axial loads from both directions as well as radial loads. - are preloaded after assembly by a precision locknut. - are protected from contamination by lip seals or gap seals. - are greased with a lithium complex soap base grease to SHELL Alvania RL3. - can be relubricated. - are suitable for operating temperatures from -30C to +120C (limited by the grease, - sealing ring material and the plastic ball cages). - are precision bearings e.g. for use with screw drives. - outer ring is suitable for flange mounting. - lip seals or gap seals on both sides. ZKLF1255-2Z ZKLF1560-2Z ZKLF1762-2RS ZKLF2068-2RS ZKLF2575-2RS ZKLF3080-2RS ZKLF30100-2RS ZKLF3590-2RS ZKLF40100-2RS ZKLF40115-2RS ZKLF50115-2RS ZKLF50140-2RS ZKLF60145-2Z ZKLF70155-2Z ZKLF80165-2Z ZKLF90190-2Z ZKLF100200-2Z Industrial package.
Polycarbonate seals having double locking anchor mechanism where anchors are retaines behind barbs in capsule or female part of body. Male & female parts of the seals are connected by two strand stainless steel sealing wire. Codes/logo can be moulded and serial nos.Are moulded on both part of seal. Laser marking also available. 100 seal in a bag , 2500 nos. Seal in carton
AV-15,16 H/P Wafer 20K + Type of body: Wafer + Flange : ANSI 300 + Material : - Body : Ductile iron, Cast steel - Stainless steel (304, 316) - Disc : Stainless steel (304, 316 & 316L) - Stem : Stainless steel (304, 316, 316L & 630) - Seat ring : EPDM, PTFE, RTFE, Metal + Face to face dimension : - ISO 5752, API 609, MSS SP-68, DIN 3203 / K1 (Short) + Top flange dimension : Bolt hole to ISO 5211 + Stem dimension : Square drive to ISO 5211 + Double eccentric (offset) disc + Vacuum equipment (up to 10-5 Torr) + Max.Temperature : - EPDM : -20 c to +120 c - PTFE : -60 c to +160 c - RTFE : -60 to +200 c - Metal : -120 to +450 c + OPTION - Lugged body - Long bonnet
AVP-15(D,S) H/P 10K, Pneumatic + Type of body: Wafer + Flange : JIS 10K/20K, ANSI 150LBS + Face to face dimension: ISO 5752 + Top flange dimension: Bolt hole ISO 5211 + Stem dimension : Square drive to ISO 5211 + Double eccentric (offset) disc + Material : - Body : Ductile iron, Cast steel - Stainless steel (304, 316) - Disc : Stainless steel (304, 316 & 316L) - Stem : Stainless steel (304, 316, 316L & 630) - Seat ring : EPDM, PTFE, RTFE, Metal + Vacuum equipment (up to 10-5 Torr) + Max. Temperature : - EPDM (-20 c to +120 c) - PTFE (-60 c to +160 c ) - RTFE (-60 c to +200 c) - Metal (-120 c to +450 c) +OPTION - Lugged body - Long bonnet
AVP-16(D,S) H/P 20K, Pneumatic +Type of body: Wafer +Flange: ANSI 300 +Face to face dimension: ISO 5752 +Top flange dimension: Bolt hole ISO 5211 +Stem dimension : Square drive to ISO 5211 + Double eccentric (offset) disc +Material : - Body : Ductile iron, Cast steel - Stainless steel (304, 316) - Disc : Stainless steel (304, 316 & 316L) - Stem : Stainless steel (304, 316, 316L & 630) - Seat ring : PTFE, RTFE, Metal + Vacuum equipment (up to 10-5 Torr) + Max. Temperature : - PTFE (-60 C to +160 C) - RTFE (-60 C to +200 C) - Metal (-120 C to +450 C) +OPTION - Lugged body - Long bonnet
Main characteristics one-piece welded body & end-piece connection pipe * note : available end connection dimension to astm, en, ks/jis, gost standard etc. mirror polished stainless steel ball tested spherical roundness. bubble tight excellent sealing with carbon-reinforced ptfe (teflon) seats. pre-loaded seat springs ensure leak-tight at low pressure and reduce valve operational torque. anti blow-out stem according to international standards. double o-rings ensure the stem sealing and can be replaced. stem dry bearing, metal with ptfe coating having self-lubricating capabilities need no additional lubricant. Wooden case
KL-365D, to replace Depac 365 seal. Double cartridge mechanical seal. Multiple spring, Modular design, suitable for stock. Operating Limits: Temperature: -50---204 Speed: 25m/s Pressure: 28bar Standard Size: 50-200mm The common material: Seal ring: Car, Sic, Ssic, TC Secondary seal: NBR, EPDM, Viton, Kalrez, PTFE, etc. Spring and metal parts: 304, 316, HAST.C. Kalu also offer mechanical seals stocks for replacement of Johncrane4620, 5610, 5620, 2800E, Burgmann Cartex-SN, Cartex-DN, MFL65 Cartridge seal, AES ConvertorII. BSFG, Chesterton GSS, 155/255, Anga BE2., BED.
1BO- BSP MALE DOUBLE FOR 60 SEAT BONDED SEAL SAE O-RING BOSS L-SERIES We are a professional manufacturer of Hydraulic fittings,and specialized in making Hydraulic hose fittings Hydraulic adapters, Hydraulic couplings, Hydraulic ferrule, Hydraulic falnge and so on . Name: Hydraulic Adapter Description: BSP Male Double for 60 Seat Bonded Seal SAE O-ring Boss L-Series Part No.: 1BO Material: Carbons teel Cover: Zinc Plated Alternative color: Silver white/ Blue white/ Yellow. We are a professional manufacturer of Hydraulic fittings,and specialized in making Hydraulic hose fittings Hydraulic adapters, Hydraulic couplings, Hydraulic ferrule, Hydraulic falnge and so on . and we can also produce whatever you want if you could provide us with drawings, including custom cnc machining, cnc machined parts, non-standard machine parts in steel , stainless steel, brass. If you have special requirements on the material, tolerance, process, treatment, equipment or test, Just feel free to contact us, and we will try our best to meet your needs.
T-pav903 serie: valve body:stainless steel, valve connection:screwed, valve way:2/2 and actuator double acting or single acting types. Da:actuator double acting , sr:actuator single acting . Application:water, air, hot water, steam, oil, aggresive media, gas, foot industry, chemical industry, Tork actuator features body extruted.Aluminium, hard anodized Caps die cast aluminium, electrostatic painted Pistons die cast aluminium Supp.Air 4-6 bar Ball valve body full borei, aisi 316 stainless steel and 3 parts body Way: two way. O-ring ptfe Pressure suitable low and high pressure. Temperature -20....140 c degree Working pres. Pn 40 bar(1/2"..11/4") , 16 bar(11/2"...3") Test bntnall valves are tested 48 hour, at 20 barda 50 pcs
MV-28 H/Performance, 10K +Type of body: Wafer +Flange : JIS 10K / 20K, ANSI 150 / 300, PN 16 / 25 +Max. Pressure: 10, 20, 30 kg/cm2 + Material : -Body : Ductile iron, Cast steel, Stainless steel (304, 316) -Disc : Stainless steel (304, 316 & 316L) -Stem : Stainless steel (304, 316 & 316L) -Seat ring: EPDM, PTFE, RTFE, Metal + Face to face dimension : -ISO 5752, API 609, MSS SP-68, -DIN 3203/K1 (Short) - Double eccentric (Double offset) disc - Vacuum equipment (up to 10-5 Torr) - Max. Temperature : EPDM : -20 c to +120 c PTFE : -60 c to +160 c RTFE : -60 c to +200 c Metal : -120 c to +450 c + Operator : Lock lever (3/4 in~ 6 in) Worm gear (3/4 in~ 40 in) +OPTION - Long bonnet - Lugged body (1â?³~ 6â?³)
PVC Light Style Double Union Ball Valve 1.Item NO.: 9301 2.Main Material:,U-PVC 3.Product Size:,1/2", 3/4", 1", 1-1/4", 1-1/2", 2" ,20mm,25mm,32mm,40mm,50mm,63mm 4.End Connector: ,Socket, thread 5.Working Pressure:,PN10 6.Working Mediums:,Water 7. Body & Handle Color:,As clients’ request (white,gray,etc.) 8.Standard,ANSI,BS,DIN,JIS NO.,PART,MATERIAL,Q'TY 1,Body,PVC,1 2,Stem O-Ring,EPDM, FPM,2 3,Stem,PVC,1 4,Ball,PVC,1 5,Seat Seal,TPE, PTFE,2 6,Carrier O-Ring,EPDM, FPM,1 7,Seal Carrier,PVC,1 8,Union O-Ring,EPDM, FPM,2 9,End Connector,PVC,2 10,Union Nut,PVC,2 11,Handle,PP, ABS, ,1
