Evaporative type air cooler mainly consists of energy efficient motor to rotate fan and water pump. It also consists of cooling pad. Size of cooling pad, fan, motor and cooler depends on quantity of cool air required per hour from cooler. Water pump pumps water on cooling pad and make it wet and at same time fan extracts air through pad and through on other side. Since air passes through wet cooling pad it gets cool. In New technology evaporative cooler or desert cooler are coming with great feature. New cooler are coming with control panel from which you can adjust fan speed, set timer, get alarm if water tank is empty etc.
model CY-11CM
power 300W
air flow (m³/h) 8000
fan type centrifugal
voltage 220V
frequency 50/60hz
controller LCD with remote
size 0.86*0.55*1.24M
cooling area (usable area) 50-70M²
noise¤60DB
water tank 100L
weight 35KG
Glade Matic Spray Lemon Refill Air Freshener 225ml is an automatic air freshener refill with a decorative design suitable for all rooms. Portable, battery operated unit. Provides fragrance for up to 60 days with a 36 minute setting. Comes in 225ml refill packaging. ready variants : - wild berries - peony and berry bliss - ocean escape - lemon - lavender and vanilla - elegant vanilla
8000CMH portable swamp air cooler is mainly composed of water tank, motor, fan, air curtain paper and shell. Through cold water, the air cooler provides cold air to adjust the temperature. It can be used for hotel, department, restaurant, hospital, office building and home etc.
Feature:
Indoor/Outdoor Evaporative Air Cooler
â?¢ Evaporative cooler for indoor/outdoor cooling
â?¢ Ideal for large open rooms, patio/ BBQ areas, garage, deck, backyard, warehouse
â?¢ UV and weather resistant for outdoor use
â?¢ Honeycomb cooling media on 3 sides for optimum cooling performance
â?¢ Powerful 1540 CFM* air flow
â?¢ Four durable caster wheels allow easy mobility
â?¢ Sound level at high speed: 65 dB
Mechanical tube expanding,tight connection between fins and copper pipe to increase heat exchange efficiency.
Bright type copper tube thickness: 0.35mm,silverbrazing for elbow.
Motor:efficient,low power-consuming,strong windy,Wide-range, low noise,long service time.
- 3 customized wind speed
- Bi - directional wind reversing mode
- Anti - exhaustion automatic pump
- Easy and mobile movement with wheels
- Timer off: Up to 3 hours
- Effective cooling area : 40 -50 (m2)
- Colour: White-green, white-blue, white-brown
- Control type: Manual
- Sustainability and Cooling as Hoa Phat Benchmark: Hoa Phat HPCF1 - 062 Evaporative Air Cooler was manufactured on modern and advanced lines, suitable for consumers. This is a product capable of reducing the air temperature suitable for the human body and at the same time bringing a cool, fresh atmosphere to indoor spaces or even open spaces with large area.
- Cooling principle suitable for open spaces: Thanks to the natural steam cooling principle, Hoa Phat HPCF1 - 062 Evaporative Air Cooler can easily lower the air temperature in the room, bringing cool breeze and effective "heat release". With power consumption of 165W, the product is capable of cooling on an area of 40-50m2 such as: large living room, restaurant, cafe, cafeteria, medium-sized office,...
Advantage
1,Big airflow,low noise, aerofoil shaped axial fan using ABS material.
2,Corrosion resistant cabinet, UV resistant, anti-deformation, stabilized, high strength structural polymer PP.
3,Moisture and tropic proof, invertor motor, operates evenly and saves energy.
4,High efficiency cooling pads (5090)with great evaporation and easily maintain.
5,Intelligent control system provides water alarm protection, automatic circuit breaker and self-cleaning, Sweden import thermostat, adjust temperature and humidity sensitively.
6,Controlled open water distribution system, which enables water flow smoothly.
Characteristics
1, High efficiency cellulose pad, Up to 90% evaporation efficiency.
2, High quality plastic cabinet; UV-resist cabinet material, Temperature tolerance from -20 OC to 86 OC.
3, High-quality aluminum sealed motor, good heat dissipation. Water proof and outstanding dissipation performance and long lifetime.
4, open-water distribution, enabling smooth flow uniformity
5, High quality drain valve, 50000 times super long lifetime
6, Luxury LCD wall controller, Thermostatic, big display, nice white back light, real clock auto on/off, temperature and humidity display, auto swing diffuser control .
More details :
1.Superior and Strong Body Design
The ESC A Series is clean, simple and modern.
Injection moulded from specially developed Permatuf polymer, is UV resistant and will stand up to the harshest extremes of climate, year after year.
2.Control System (LCD Touch screen +Remote)
The ESC A SeriesLCD Touch screen +Remote controller plus climate control at your fingertips. It's so easy to use. You set the comfort level you want on the controller.
You can choose from four different control modes to control your home the way you want.
3.FEATURES
a.Long leg pump
ESC 'S long leg water pump provides exceptional reliability in the most extreme conditions and long leg design can avoid short circuit.
b.Stealth fan
Stealth fan design with 3 blades is super quiet in operation and ensures a constant, even flow of air through Cooling pads. The advanced aerodynamic design uses only a small amount of energy to produce a constant, welcoming ESC .
c.Cooling Pad
Made from a special cellulose material, maximum cooling efficiency 5090 , The pads are essentially self-cleaning - dust and pollen is captured on the pads and then washed away into the sump below by the flow of water.
d.Free-flow water distributor
A world patented water distribution system delivers continuous, even water coverage to the cooling pads, ensuing maximum cooling effect.
e.Automatic drain valve
ESC cooler system doesn't requre costly and time consuming seasonal maintenance at the beginning and end of each season because your unit is fitted with an automatic drain valve. This specially programmed valve keeps your cooling system clean and operating at maximum efficiency, while using the mimimum amount of water. During warmer weather dust and airborne impurities may get into your system. That's when necessary, replaving it with clean, fresh water.When your system is not in use, the valve automatically empties the reservoir, leaving it clean and dry.
f.Automatic Inlet valve
Inlet Valve is Inlet & Valve. Therefore Inlet Valve is that valve through which water whose pressure in increased by reducing its volume in intaked into the cylinder.
h.Smart Management
An electronic smart-control system manages your Coolair¡¯s whole of home system. Fan speeds, water cycling, climate control, operating programs¡ it¡¯s all taken care of with reliable precision. All you have to do is set and forget, then just enjoy the superb comfort of a Coolair cooled where you want cooled the place .
Specification
HZ12-18X-A1
Fan Capacity (m3/h) 18000
Full Pressure (Pa) 200
Voltage/Frequency (V/Hz) 220/50
Fan Type :Axail
Fan Speeds 1-phase,varialbe speeds
Noise (dB) ¡Ü68
Water Consumption (L/h) 15-25
Water Capacity (L) 40
Application Area (m2) 100-150
Drive Distance (m) 20
Auto Cleaning ¡Ì
Water Lack Protection ¡Ì
Dimension (mm) :1100*1100*980
Net Weight (kg): 76
Discharge:down
CASå?·:57-13-6 Urea for vehicles, agricultural urea, urea N46ï¼?
When the temperature of urea is below 20 â?? and the relative humidity is below 70%, it will not only not absorb moisture, but also evaporate water and reduce its water content; When the temperature exceeds 20 â?? and the relative humidity is higher than 80%, it starts to absorb moisture, and becomes paste when it is serious. When the air is dried again, it will re agglomerate, which is only inferior to ammonium nitrate. When the urea aqueous solution is at 80 â??, hydrolysis and decomposition reactions will occur, forming ammonium carbamate, ammonia gas and carbon dioxide respectively. Under acid and alkaline conditions, urea will decompose faster when it is heated. Urea is easy to combine with straight chain carbohydrates to form crystalline additional compounds; It forms a variety of double salts with various inorganic compounds, such as Ca (NO3) 2 �· 4CO (NH2) 2, NH4Cl �· CO (NH2) 2, CaChemicalbookSO4 �· 4CO (NH2) 2, MgSO4 �· 4CO (NH2) 2 �· 3H2O, Mg (NO3) �· 4CO (NH2) 2 �· 2H2O, etc; It is easy to form urea phosphate, dicalcium phosphate and water with monocalcium phosphate, namely Ca (H2PO4) 2 �· H2O+CO (NH2) 2 â?? H3PO4 �· CO (NH2) 2+CaHPO4+H2O; With nitric acid, it is easy to form urea nitrate, CO (NH2) 2+HNO3 â?? CO (NH2) 2 �· HNO3, which combines and relaxes the two; It can combine with formaldehyde to form urea formaldehyde compounds (uric acid rubber shrinks), in which the higher proportion of formaldehyde is urea resin, and the lower proportion is slow-release (effective) urea.
Specification in detail:
1.All plastic shell of cooler is made of high strength composite materials.
2.Special designed for air cooler fan, reach top air flow of 20,000 m³/h, full plastic structure, high pressure of fan and low noise.
3.With integrated and special water distribution structure makes the water distribute smoothly.
4 .Using high efficient 5090 cooling pads with large evaporation capacity, good cooling efficiency and easy to clean.
5 .Specially designed air cooler body is made of PP plastic,which is also kept from aging, UV and rust with a lifetime for ten years.
6 Enhanced column design and strong machine.
7 Many Air cooler body design, and best sense of beauty.
8. The motor which used aluminum shell and resistance to high temperature and high humidity; it operate smoothly and have long service life.
9. With the special water pump of the evaporative air cooler, resistant to idle, and fit to muddy run.
10 .Designed over-voltage over-current electric control protection, and intelligent LCD controller which is easy to operate and understand.
Model:jh18ap-10bd
Product name: inverter evaporative air cooler
Feature:airflow from bottom, 16-speed, made of plastic.
Airflow:18000m3/h
Air pressure:200pa
Power supply:220v/50hz
Power consumption:1.1kw
Exterior size:1100x1100x950mm
Wind exit size:642x642mm
Fan type:axial
Noise: ¿¬48-73 db(a)
Effective area:100-150m2
1,2 or 3 Person Inflatable Boat with Aluminum Oal Water Outdoor Sport
Set includes: 2, 48-inch aluminum oarsColor: green with yellowMaterials: environmentally friendly PVC Size:243x113cm/96x44in
Capacity: 3 people OR 1 People
The inflatable boat is perfect for boating fun for two adults. Whether fishing, relaxing, or rowing on the lake, this boat is great for making your adventure exciting and entertaining. Designed with heavy duty, puncture resistant ecofriendly PVC for comfort and durability, and an inflatable air chamber I-beam for rigidity, the boat contains 3 air chambers including an inner auxiliary air chamber inside the main hull for extra safety. Portable and easy to inflate and deflate, the boat is great for use in a lake or pond. Inflating and deflating is a breeze with two quick-fill Boston valves. A trangle handle on the bow.There are packed serveral oar holders and a repair patch kit.
Have a nice day!. Thank u for your inquiry. I am Cauter Yan from Aolan Industrial Co., Ltd, we are a leading manufacturer in evaporative air cooler for both home/office and industrial use too (from 1000M3/H upto 100000M3/H) we had gained more than 50patents of national invention, utility models and industrial design, our product had passCE, SASO, BV etc, and successfully exported more than 70 countries and regions, including Europe, America, Australia, Japan, Korea, Middle East, Brazil, Southeast Asia, and Africa etc. With years' development, Aolan had grown into a company who occupies the wide international market share, u can view details with link: http://www.aolan-china.com for more details. As the AZL045-ZY13A/ZY13B, Pls view the specification as attachment. Pls inform the quantity which u want
In the other, pls inform more details with your company, and if u use whatsapp ?
Description by Manufacturer
ENGINE
Engine Type V6
Bore x Stroke 3.63 x 3.00 in. (921 x 762 mm)
Displacement 186 CID (3,046 cc)
DIMENSIONS
Shaft Length 25 in. (635 mm)
Weight 528 lb. (240 kg)
GENERAL
Propshaft Horsepower 175 HP (131 kW)
Full Throttle Operating Range 5000-6000 RPM
Gear Ratio / Shift F-N-R
Cooling Water-cooled with thermostat & pressure-controlled
The Mercury Diesel Outboard is a diesel two-stroke designed for light duty commercial patrol boat applications. The EPA certified engine joins the U.S. Department of Defense spec diesel outboard Mercury Marine released in May 2015. The Mercury Diesel Outboard features exclusive spark ignition, direct fuel injected 2-stroke technology which enables it to run on readily available ultra-low sulfur diesel fuel.
SPECIFICATIONS
HP: 175 HP (131 kW)
Engine type: V6
Displacement: 186 CID (3,046 cc)
Displacement: 3.0 L
Full throttle: 5000-6000 RPM
Shaft length: 25 in. (635 mm)
Gearcase ratio: 2.08:1
Dry weight *Lightest model available: 528 lbs (240 kg)
Bore and stroke: 3.63 x 3.00 in (921 x 762 mm)
Fuel system: 2-stage Direct Fuel Injection (DFI)
Cooling system: Water-cooled with thermostat & pressure-controlled
Gear shift: F-N-R
Exhaust system: Through prop
KEY FEATURES
Available with a 25â?? (635 mm) center section and the 2:1 Fleet Master gearcase in both right-hand and left-hand rotation.
Industry-exclusive spark ignition diesel engine. Glow plug ensures consistent, reliable cold starting.
Commercial patrol boat models meet EPA emissions standards.
Cylinder heads designed specifically for combusting diesel fuel.
High performance cylinder liners for maximum horsepower and optimal engine running quality.
Fuel/air mixture is injected into the combustion chamber at 95 psi for enhanced high rpm running quality.
