Closed IV Catheter Nexiva 20 Gauge 1 Inch Sliding Safety Needle UOM: 80/CS Product Number: 383516 Manufacturer: BD
This pale yellow coloured oil, extracted from sunflower seeds, is hign in poly-unsaturated fats and low in saturates. As very stable oil, Sunflower oil has a long shelf life, without hydrogenation. With a relatively low smoke point, it can be used for shallow frying, cooking and salad dressings. Neutral in flavour and aroma, and it's healthy proportions made Oilio Sunflower oil popular in kitchens decades ago, and now, Sunflower oil ranks the fourth most used oil worldwide. SUNFLOWER OIL Taste Neutral Impurities Negative Free Fatty Acid ( % ) max 0,10 Moisture ( % ) max 0,05 Peroxide Value ( meq O2/ kg ) max 5 Specific gravity at 20 degr C 0,91 - 0,93 Iodine value ( g / 100 g ) 110 - 143 Colour Lovibond 5 1/4 " Red max 1,5 Colour Lovibond 5 1/4 " Yellow max 15 C 12:0 C 14:0 (Myristic Acid) C 16:0 ( Palmitic Acid ) 3 -10 C16:1 (Palmitoleic Acid) C 18:0 ( Stearic Acid ) 1 - 10 C 18:1 ( Oleic Acid ) 14 - 35 C 18:2 ( Linoleic Acid ) 50 - 75 C 18:3 ( Linolenic Acid ) < 0,5 C 20:0 ( Arachidic Acid ) < 1,5 C 20:1 ( Gadoleic Acid ) < 0,5 C 20:2 (Eicosenic Acid) C 22:0 ( Behenic Acid ) < 1 C 22:1 ( Erucic Acid ) < 0,2 C 24:0 ( Lignoceric Acid )
This pale yellow coloured oil, extracted from sunflower seeds, is hign in poly-unsaturated fats and low in saturates. As very stable oil, Sunflower oil has a long shelf life, without hydrogenation. With a relatively low smoke point, it can be used for shallow frying, cooking and salad dressings. Neutral in flavour and aroma, and it's healthy proportions made Oilio Sunflower oil popular in kitchens decades ago, and now, Sunflower oil ranks the fourth most used oil worldwide. SUNFLOWER OIL Taste Neutral Impurities Negative Free Fatty Acid ( % ) max 0,10 Moisture ( % ) max 0,05 Peroxide Value ( meq O2/ kg ) max 5 Specific gravity at 20 degr C 0,91 - 0,93 Iodine value ( g / 100 g ) 110 - 143 Colour Lovibond 5 1/4 " Red max 1,5 Colour Lovibond 5 1/4 " Yellow max 15 C 12:0 C 14:0 (Myristic Acid) C 16:0 ( Palmitic Acid ) 3 -10 C16:1 (Palmitoleic Acid) C 18:0 ( Stearic Acid ) 1 - 10 C 18:1 ( Oleic Acid ) 14 - 35 C 18:2 ( Linoleic Acid ) 50 - 75 C 18:3 ( Linolenic Acid ) < 0,5 C 20:0 ( Arachidic Acid ) < 1,5 C 20:1 ( Gadoleic Acid ) < 0,5 C 20:2 (Eicosenic Acid) C 22:0 ( Behenic Acid ) < 1 C 22:1 ( Erucic Acid ) < 0,2 C 24:0 ( Lignoceric Acid )
Product Name Android MiniPOS Aisino A80 OS Android 7.1 Secure operating system Processor 32-bit, Quad-core, 1.1Ghz application processor High performance secure processor Memory RAM: 1GB (optional 2GB) ROM: 8GB (optional 16GB) Display 5 Color screen 1280 720 Touch Screen Capacitive touchscreen Keys 1 Power key 1 Function key 3 Touch keys WIFI 2.4GHz IEEE802.11b/g/n Communications 4G 3G 2G Bluetooth BT 4.X Card Readers IC card reader NFC reader Camera 2 MP Rear Camera 1D/2D barcode scan Optional: 5MP rear zoom camera GNSS GPS GLONASS BeiDou Indicator Lights 4 NFC LEDs 1 Charging indicator Audio Speaker Microphone Card Slots 1 SIM 2 PSAM Battery 3.85V/3000mAh Dimensions 150 75 16mm L W H Weight 220g Peripheral Port 1 USB OTG, Type-C, 5V Environmental Operating temperature: 0 ~ 50 Storage temperature-20 ~ 70 Relative humidity 5%~95%, Non-condensing Optional Configurations ASD18 Bluetooth Printer Docking Station
Closed IV Catheter Saf-T-Intima 22 Gauge 0.75 Inch Retracting Safety Needle UOM: 200/CS Product Number: 383323 Manufacturer: BD
Product Code: MESM 03 Specifications: Two Bottles Size/Strength: 2X1500ML This is unique type of suction machine gives powerful suction with exceptionally Noiseless Operation. Capacity: â?? 700 �± 10mm Hg regulable at 25-30 Ltrs./Min Power: 230V, 50 Hz, 4 �± 0.5 Amps, 200 watts Vacuum Gauge : 2 inch, BCPM,. 0-760mm Hg calibration Jars : Polycarbonate / Glass Jars (2 x 1.5 Ltr.), fitted with Specially Design Self Sealing Rubber Lids Pump Type : Oil Immersed Piston Pump with 1/8 Hp Electric Motor Housing : M.S. Powder Coated Cabinet, mounted on Rubber Bush & fitted with Handle for Easy Mobility Dimensions & Weight : 13 x 10? x 36, 13 Kg (approximately)
Essential details Place of Origin: AUSTRIA Application: PET Fibre, PET Sheets, PET Strap Grade: AAA Product name: Hot Washed PET Clear Blue Flakes Type: PET Color: Clear Blue Packing: Jumbo Bag IV: 0.72 Material: Recycled PET Bottles Usage: Manufacturing Quality: 0% PVC, 0% Foreign Material Supply Ability Supply Ability 10000 Metric Ton/Metric Tons per Month Packaging & delivery Packaging Details Jumbo Bag Picture Example: package-imgpackage-img Lead time: Quantity(metric tons) 1 - 24 >24 Lead time (days) 1 To be negotiated
Product descriptions from the supplier Used Railway Steel the minimum order is 24 tonnes, and we always have a healthy amount of stock available for you to choose from. We can provide both heavy and light gauge railway line, which have multiple uses for our customers. The salvaged steel can be re-used many ways, including: Cattle grids Rural fencing Relays for light or heavy gauge rail Road barriers Retaining posts Smelting Trellis Posts/Stakes for Vineyards Crab Pot Weights We are operate in the supply of Metal Scrap of various kinds; HMS 1 & 2, AC/ Fridge Scrap, Engines Scrap, Battery Scrap, PVC Scrap, HDPE, LDPE and other Metal scrap from wide range extraction materials. Chemical Composition of the steel scrap is of international standard as follow: MN: 0.60 1.05; C: 0.54 0.82; Sl: 0.18 - 0.12; S: 0.04 Max; P: 0.035 max. MOQ contact: Used rails R50-r65 15,000mt x 12 months MOQ contact: HMS1/2 15,000mt x 12 months C 0.54 â?? 0.82 Si 0.18 â?? 0.40 Mn 0.60 â?? 1.05 S 0.04 max P 0.035 max As 0.01 max of Mass share Norms R-50 GOST-7173-75 and R-65 GOST-8165-75 R50 (51.67 KG/M) GOST 7173-75 R65 (64.72 KG/M) GOST 8165-75
Product descriptions from the supplier Used Railway Steel the minimum order is 24 tonnes, and we always have a healthy amount of stock available for you to choose from. We can provide both heavy and light gauge railway line, which have multiple uses for our customers. The salvaged steel can be re-used many ways, including: Cattle grids Rural fencing Relays for light or heavy gauge rail Road barriers Retaining posts Smelting Trellis Posts/Stakes for Vineyards Crab Pot Weights We are operate in the supply of Metal Scrap of various kinds; HMS 1 & 2, AC/ Fridge Scrap, Engines Scrap, Battery Scrap, PVC Scrap, HDPE, LDPE and other Metal scrap from wide range extraction materials. Chemical Composition of the steel scrap is of international standard as follow: MN: 0.60 1.05; C: 0.54 0.82; Sl: 0.18 - 0.12; S: 0.04 Max; P: 0.035 max. MOQ contact: Used rails R50-r65 15,000mt x 12 months MOQ contact: HMS1/2 15,000mt x 12 months C 0.54 â?? 0.82 Si 0.18 â?? 0.40 Mn 0.60 â?? 1.05 S 0.04 max P 0.035 max As 0.01 max of Mass share Norms R-50 GOST-7173-75 and R-65 GOST-8165-75 R50 (51.67 KG/M) GOST 7173-75 R65 (64.72 KG/M) GOST 8165-75
Printing Parameters Squeege:70-75 SHORE Mesh:Â 120 - 190/inch Tension:Â 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 -4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:70-75 SHORE Mesh: Â 120 190/inch Tension:Â 25 - 35 N/cm Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:70-75 SHORE Mesh: 120 -190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE Mesh:Â 120/inch Tension:Â 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130- 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE Mesh:Â 120/inch Tension: 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE Mesh:Â 120/inch Tension:Â 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 110 - 135oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE Mesh:Â 120/inch Tension:Â 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
