Pekins Gas Engine 4016 61Trs2 Suppliers and Manufacturers

Parameter Method Unit Result Appearance - Black Density: 150C ASTM D-1298 Kg/L 0.88 Flash Point : ASTM D-93 OC 35 Water Content : ASTM D-95 % Vol

Appearance Visual Clear & Free of suspended Method Specific Gravity @ 20/20 Deg ASTM D-4052 Kg/L 0.7930 IBP ASTM D-1078 OC 64.2 DP 65.2 Purity GC % m 99.85 Total Chlorides UOP 779 Mg/kg

We have 3 grades in MHO Grade 1 :density=0.815-0.825 ,Flash =30-35, vis=1.60-1.90 , FBP=330 Grade 2 :density=0.815-0.825 , Flash=30-35 ,vis=3.10-4.10 , FBP=>400 Grade 3 :density=0.81-83 ,Flash=50-60 , vis=3.10-4.10 , FBP=>400

Aviation Kerosene Colonial Grade 54 Jet Fuel JP 54: Jet fuel A-1. Jet fuel designed for use in aircraft powered by gas-turbine engines. It is clear to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1 are produced to a standardized international specification.

Using bioethanol for fuelling gasoline engines reduces the green-house gases emitted by minimum 60% compared to ordinary gasoline fuel. The Bulgarian legislation provides that minimum of 7% of gasoline sold in the gas stations shall be bioethanol. The international standard requires that the bioethanol has alcohol content of minimum 98.7%. With 99.99% alcohol content, the bioethanol produced by Almagest is well above the requirement.

CAS 12018-10-9 HS : 28415000 25KG/DRUM Application: Copper chromite has been used as an efficient catalyst of organic reactions, such as hydrogenation, dehydration, cyclization, alkylation of organic compounds, the reaction of transforming aniline into diphenylamine, and preparation of caprolactam, etc. It could also be used as a catalyst on environmental protection of eliminating organic wastes and carbon monoxide from waste gas generated by engine. It has been used as an efficient burning rate catalyst of composite solid propellants in spaceflight. - Sealents - Polymers - Electrical insulation materials - Waterproofing and corrosion protection materials - Coating

Jet Fuel A1 is a specialized type of kerosene designed for use in aircraft powered by gas-turbine engines. It meets stringent international specifications, ensuring optimal performance and safety for aviation applications. Primary Characteristics: Appearance: Clear to straw-colored liquid. Odor: Characteristic petroleum or kerosene odor. Density: Typically around 0.80 kg/l at 15 C. Flash Point: Minimum of 38 C (100 F). Freezing Point: Maximum of -47 C (-53 F). Specifications: Jet Fuel A1 adheres to the stringent international standards set by organizations like ASTM (American Society for Testing and Materials) and DEF STAN (UK's Defence Standard).

Liquefied petroleum gas or liquid petroleum gas (LPG or LP gas), also referred to as simply propane or butane, are flammable mixtures of hydrocarbon gases used as fuel in heating appliances, cooking equipment, and vehicles. It is widely used alternative fuel. It has substantial reserves due to its dual origins from natural gas processing and crude oil refining. Liquefied Petrol Gas (LPG) powered passenger cars have about 10% lower tailpipe CO2 emission than comparable gasoline powered cars. When compared to a diesel car, there is no significant CO2 emission reduction per km driven; however, LPG powered vehicles do have substantially lower NOx emissions than diesel powered vehicles.

D2 is a refinery abbreviation for Gasoil. It is the second distillate from the crude oil, and can be used without reformers and additives. So, the first engines used D2 as fuel before petrol cars as we know them today was invented. That is because the engine invented by a German called Diesel, requires no spark plugs. The diesel engine will ignite and combust when the pressure increases so that the heated plug makes it explode. Here we get the name Diesel since the same principles are used in diesel engines today. However, automotive diesel that you fill has additives that the refinery will add to make the engine more efficient and also easier to start in the winter. Diesel changes flash point in the winter. It also has additives to absorb water that condense. If you use summer diesel in the winter, you will get better mileage, but your fuel pipes may freeze and can also burst, and the wax makes the diesel flow thicker.

Mazut is a heavy, low quality fuel oil, used in generating plants and similar applications. In the United States and Western Europe, mazut is blended or broken down, with the end product being diesel. Mazut may be used for heating houses in the former USSR and in countries of the Far East that do not have the facilities to blend or break it down into more conventional petro-chemicals. In the West, furnaces that burn mazut are commonly called "waste oil" heaters or "waste oil" furnaces. Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75 (not active), GOST 10585-99 Oil fuel. Mazut is almost exclusively manufactured in the Russian Federation, Kazakhstan, Azerbaijan, and Turkmenistan. This product is typically used for larger boilers in producing steam since the energy value is high. The most important factor when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a dirty oil product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil (Bunker C), and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.

Sodium Tolytriazole 50% is most frequently used in alkaline environments such as for engine coolants & cleaners, metalworking fluids, cooling towers, inks, and cleaners. Its mainly used as a metal, rust inhibitor, widely used in anti-rust oil (Grease) products, mostly used for copper and copper alloy gas phase corrosion inhibitor, lubricating oil additives, automotive antifreeze. Sodium Tolytriazole 50% can also be used together with scale inhibitors. It's used in many commercial and industrial products like, corrosion inhibitors and ant scaling agents, functional fluids, lubricants and lubricant additives. It's also used in anti-freeze and de-icing products, cleaning and furnishing care products, water treatment products and auto products. Specifications Appearance: Amber Liquid Assay: 49.5 -51.0% Specific Gravity (25oC): 1.186 - 1.196 Free Alkalinity (as NaOH): 0.50% Max pH (10% water @ 25oC): 11.5 - 12.0 Chloride Content: 50 PPM Max Turbidity (10% water): 30.0 NTU Max Packing 500 LB Drum

Application: PE has a variety of applications depending on its type and properties, including: Packaging� : PE is widely used in packaging production such as plastic bags, PE bags, heat shrink packaging, coated film packaging, etc. Due to its flexible, waterproof and good bearing properties. Pipes and tubes� : Polyethylene is used for the manufacture of water pipes, gas pipes, fuel and drinking water pipes, as well as in piping systems for the chemical and petroleum industries. Toys and household products  : PE is often used in the production of children's toys, outdoor toys, household appliances such as containers, sinks, and other products due to its safety and ease of processing. variable and flexible. Plastic sheets and coatings� : PE is also used to produce plastic sheets, coatings for surfaces, partitions, and waterproof panels in construction, packaging, and other industrial applications. Automotive Parts� : Polyethylene is used in the manufacture of automotive parts such as shock absorbers, stabilizers, under-engine protection and many other applications due to its impact resistance and durability. Making agricultural mulch� : PE is used to produce products such as mulch nets and sunshade nets in agriculture to protect crops.

Title: High-Quality Calcium Chloride for Industrial and Commercial Applications We are offering Calcium chloride Powder, Calcium chloride Flakes (77% to 80% content Calcium), Calcium Chloride pellets (94% to 97% Content calcium and type of calcium falkes), Calcium chloride Prills Food specially for wastewater treatments, pharmaceuticals, aquaculture, fertilizers, agriculture, textiles, and emery stones. Linear Formula: CaCl2 Molecular Weight: 110.98 CAS Number: 10043-52-4 EC Number: 233-140-8 MDL Number: MFCD00010903 PubChem Substance ID: 24873292 NACRES: NA.23 Key Features: Purity: Our calcium chloride boasts exceptional purity levels, making it ideal for various industrial processes where quality is paramount. High Performance: Engineered for superior performance, our calcium chloride delivers consistent results, even in demanding environments. Rapid Dissolution: Our product dissolves quickly and efficiently, facilitating ease of use and enhancing operational efficiency. Applications: Oil and Gas Industry, Food Processing, De-icing, Dust Control, Water Treatment,