Prism Material: Flint glass, UV fused silica, Infrared fused silica, CaF2, Ge, ZnSe, Si etc. Dimension: 4mm-- 100mm Angle tolerance: 30" --3' Surface accuracy: ª-/10--1ª- Surface quality: 60/40 Clear Aperture: 90% Coating: custom design According to custom design to manufacture kinds of right angle prism, equilateral prism, dove prism, penta prism, roof prism from optical glasses. Standard lot
Standard lot
All kinds of bespoke optical windows: CaF2 windows FS windows BK7 windows
Sunday Optics is specialized in the processing of precision optical window,We have four-axis polishing machine, large-size ring polishing machine, two-axis machine to manufacture high precison windows for customers. The high-precision window is made of BK7 optical glass and UV fused quartz, the fused silica quartz window plate is suitable for high power laser that needs good thermal stability, and the window made of N-BK7 material is cheaper, which is suitable for laser applications that pay more attention to cost.Both fused quartz and N-BK7 laser window plates have precision grades of 1/10 lambda surface flatness and 10-5, 20-10 surface quality to ensure minimal interference to the transmitted beam.Sunday Optics is specialized in the processing of precision optical window,We have four-axis polishing machine, large-size ring polishing machine, two-axis machine to manufacture high precison windows for customers. we can offer 24 inch zygo flatness reports, full CA 600mm windows. Specifications Diameter 0.1mm to 1000mm Diameter Tol. +/-0.02mm Material Bk7 sapphire fused silica,ZnS2,CaF2,Si,Ge. Surface Quality 10-5 standard Flatness 1/10 lambda Parallisam
The Powell Lens can be widely used in alignment, machine vision systems, construction and process control fields. Worldhawk are professional supplier for powell lens, in fact, we have already become the one of the main important suppliers of powell lenses in China. cooperation with us , you will get high quality products with reasonable price and products performance at the same time These Laser Line Generator Lenses, also known as Powell lenses, generate a straight, uniform laser line by fanning out a collimated beam in one dimension, as shown in the diagram above. The apex of each lens features an aspheric curve that evenly distributes the optical power, resulting in an intensity variation of less than 25% over the center portion of the line. You will get more even energy distribution along the laser line than using the rod lenses and lenses.
Powell Laser Line Generator Lenses These Laser Line Generator Lenses, also known as Powell lenses, generate a straight, uniform laser line by fanning out a collimated beam in one dimension, as shown in the diagram above. The apex of each lens features an aspheric curve that evenly distributes the optical power, resulting in an intensity variation of less than 25% over the center portion of the line. You will get more even energy distribution along the laser line than using the rod lenses and lenses. Powell lens are available with output fan angles of 5°--130°. They are designed for use at 405-900 nm with an input beam diameter of 0.8 -5.0mm (1/e2). Rectangular input beam can be customized for powell lens. The Powell Lens can be widely used in alignment, machine vision systems, construction and process control fields.
Optical sapphire ball lens and half ball lens are both made from Al203, it's ideal for demanding applications (such as laser systems). They have a lot of advantages: 1/ Stronger than standard optical glass,they have extreme surface hardness, high thermal conductivity, high dielectric constant and resistance to common chemical acids and alkalis. 2/ Transmits Wavelengths Ranging From UV to Mid-Infrared (0.2 - 5.5µm.) Materials characteristic Refractive index (nd) 1.768 Coefficient of dispersion (Vd) 72.2 Density (g/cm3) 3.97 TCE (μm/m) 5.3 Soften Temperature () 2000 Knoop hardness (kg/mm2) 2200 About sapphire materials for our ball lenses We only choose the best sapphire material to process the ball lens and hemispherical half ball lenses for our customers. As you know, sapphire has higher performance and higher purity near the center in the process of growing. So only the ball lens made from this part of the material has better performance.
Plano-convex lens, aslo called positive lens, is used to converge incident light to a spot on the axis, at a certain distance behind the lens, which is knowed as focal length. It can form both real images and virtual images(for magnifier) on the two sides. The materials to make plano-convex lens can be BK7, Fused Cilica, sapphire and CaF2 etc., for different applications.This model are commonly applied in many devices including telescopes, collimators, magnifiers,optical transceivers, condensers and other optical display or imaging optical systems. AR/NIR or other coatings are available according to the applications. Material-------------------Fused cilica, BK7 Grade A or equivalent optical glasses Design Wavalength------546.1nm Diameter Tolerance------í+0.1mm, í+0.15mm for Dia.í¦75mm Paraxial Focus Length----í+2% Centration----------------85% Surface Figure------------ª-/4 @632.8nm Surface Quality-----------60-40 scratch and dig Coatings-------------------Antireflection coatings or NIR coatings Bevel-----------------------A slight protective bevel, such as 0.25mmí-45íp (For different applications, there are various choices in the specifications, which must be determined according to usersí» specific requirements.) Products include: Achromatic lens Meniscus Lens Double-concave Lens Plano-concave Lens Double-convex Lens Plano-convex Lens Cartons
All kinds of spherical & aspherical optics/ precision optical components, such as lenses, prisms, filters, windows, flats, waveplates, reflectors, infrared lenses, crystals, assemblies, etc..
*Material:Bk7,fused silica,CaF2,MgF2,BaF2,ZnSe infrared optical crystals. *Focal�length:+/-1% *Length�tolerance:+0.0 - -0.1mm *Width�tolerance:+0.0 - -0.1mm *Center�thickness�tolerance:+/-0.1mm *Surface�Figure:lambda/2 at 633nm on plano side *Surface�quality:60-40�stratch/dig *Clear�Apenture>90% *Chamfer:0.25mm at 45 degree typical *Coating:optional.
Specifications£º Material: Bk7, Quartz, Caf2, Sapphire etc. Diameter: .OD:2mm-120mm Edge thickness: 1mm +/- 0.10mm. Focal length: 0.1% to 2% . Surface quantity: 80/50 to 20/10 . Centration: 1 to 3Arc minutes Fringes: 1 to 5 Clear Aperture>90% of diameter Coating: Uncoated, AR, HR, PR coating, etc. Shaps: Spherical, aspheric, ball, plano, cylindrical etc. Applications: Lighting ,project,viedo projector,saolar system,telescope, etc.
Optical glass ball lens, half ball lens, super hemisphere lens, sapphire ball, ruby ball, glass ball, monocrystalline silicon ball, yag crystal ball, quartz ball (jgs1, jgs2, jgs3), aspherical lens, hole jewel bearing, sapphire microhole, sapphire tube, jewel cup, jewel rod, jewel nozzle, sapphire window, ceramic components and other jewel assemblies..Export
Window: Windows are applied to isolate different physical environments while allowing light to passing through. We supply all kinds of windows, which are made from different materials such as bk7, fused silica and sapphire. Single layer or multiplayer anti-reflecting or high-reflecting coatings on optical windows are available upon customer's requirement.
Sunday Optics is specialized in the processing of precision optical window,We have four-axis polishing machine, large-size ring polishing machine, two-axis machine to manufacture high precison windows for customers The high-precision window is made of BK7 optical glass and UV fused quartz, the fused silica quartz window plate is suitable for high power laser that needs good thermal stability, and the window made of N-BK7 material is cheaper, which is suitable for laser applications that pay more attention to cost.Both fused quartz and N-BK7 laser window plates have precision grades of 1/10 lambda surface flatness and 10-5, 20-10 surface quality to ensure minimal interference to the transmitted beam.Sunday Optics is specialized in the processing of precision optical window,We have four-axis polishing machine, large-size ring polishing machine, two-axis machine to manufacture high precison windows for customers. we can offer 24 inch zygo flatness reports, full CA 600mm windows. Specifications Diameter 1mm to 1000mm Diameter Tol. +/-0.02mm Material Bk7 sapphire fused silica,ZnS2,CaF2,Si,Ge. Surface Quality 10-5 standard Flatness 1/10 lambda Parallisam
"we supply optical spherical ball lens Specifications: Material: bk7, lasfn9 glass or other optical glass Sphericity: /4 at 633nm Surface quality: 20-10 Diameter: 1m Coating (optional): r
Glass lenses, cover window, optical filter, glass prisms, lens, optics.
Achromatic doublet lens, cylindrical lens, spherical lens, windows, prisms, mirrors and wedges from optical glass, uv-grade fused silica and caf2.
Spherical lens According to custom design to manufacture kinds of spherical lenses. Such as plano convex spherical lens, plano concave spherical lens, bi-convex spherical lens, bi-concave spherical lens, meniscus lens, achromatic lens, aspherical & spherical series. Material: flint glasses, UV-fused silica, Infrared fused silica, CaF2, Ge, ZnSe, Si, etc. Focal length: í+5mm --í+1000mmí+1% (test by TIROPTICS OPTOMATIC2000 made in Germany) Diameter: 4mm--200mm í+0.1mm Tc torlerance:í+0.1mm Centration: 3-5' Surface accuracy: ª-/2 Surface quality: 40/20 Clear aperture: 90% Coating: custom design
Cylindrical lens Material: flint glasses, UV-fused silica, Infrared fused silica, CaF2, Ge, ZnSe, Si, etc. Focal length:í+5mm-- í+1000mmí+1% (test by TIROPTICS OPTOMATIC2000 made in German) Length: 2mm-3mm í+0.1mm Width: 2mm-150mmí+0.1mm Tc tolerance:í+0.2mm Centration: 3-5' Surface accuracy: ª-/2 Surface quality: 40/20 Clear aperture: 90% Coating: custom design
Prism Material: Flint glass, UV fused silica, Infrared fused silica, CaF2, Ge, ZnSe, Si etc. Dimension: 4mm-- 100mm Angle tolerance: 30" --3' Surface accuracy: ª-/10--1ª- Surface quality: 60/40 Clear Aperture: 90% Coating: custom design
