SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Casual Yellow Off-Shoulder Frilled Tops: Material : 100% cotton Product Details: Yellow color with light blue polka dots A-line cut Off shoulder with frills Fit : Easy (the model with height 5'5" and chest 32" is wearing a size S) Wash : Machine wash Product Code : 2017_04_0039_tp
Product Details Certification HACCP, HALAL, ISO,SIF Shelf Life 12-24 months Part Leg Quarters Freezing Process BQF Packing Material Packed in Plastic Bags Pack Quantity 1kg Additional Information Payment Terms T/T Delivery Time URGENT Feather off- well cleaned and fresh- no bruises- no black pads or ammonia bus- no bad smells- no excessive blood or blood stains- moisture content is less than 3%
BAG THAT MAKES A STATEMENT Did you know you have only 7 seconds to make a first impression And every detail matters this eyecatching leather briefcase will help you to turn heads and catch the COMPLIMENTS make you feel more confident and goodlooking made you long lasting the highquality buffalos leather is handmade using craftsmanship secrets passed down through generations Reliable hardware tearresistant lining highquality of zippers dedication and ATTENTION TO DETAIL is what ensures incredible look of a quality leather accessory DESIGNED FOR COMFORT The bag features two spacious compartments padded computer compartment for laptop up to 17 padded tablet pocket trolley strap at its back and a shoulder strap adjustable in length DIMENSIONS Height 126 in 32 cm Length 165 in 42 cm Width 47 in 12 cm Shoulder drop length 283 472 in 72 120 cm Weight 3lb 12oz 17 kg ONE OF A KIND The laptop bag is made from fullgrain buffalo leather which is using tanning method This artisan technique maintains a natural look of leather leaving each piece with a slightly different pattern So there will be only one bag like yours in the world QUALITY IS NOT JUST A GOAL ITS A PROMISE If you are not satisfied with our product for any reason we are here for you to resolve any issues and ensure your happiness BRANDAFREEN FASHION
BAG THAT MAKES A STATEMENT: Did you know you have only 7 seconds to make a first impression, And every detail matters - this eye-catching leather slingbag will help you to turn heads and catch the COMPLIMENTS, make you feel more confident and good-looking MADE TO LAST: The leather bag is handmade using craftsmanship secrets passed down through generations. Reliable hardware, tear-resistant lining, YKK zippers dedication and ATTENTION TO DETAIL is what ensures incredible look of a quality leather accessory DESIGNED FOR COMFORT: the briefcase fits all your modern life needs tablet, smartphone and everything else you need for daily business. DIMENSIONS: Height: 10.2 in (26 cm) Length: 8.7 in (22 cm) Width: 2.8 in (7 cm). ONE OF A KIND of shoulder sling bag is made from full-grain cowhide leather, which is hand-dyed using vegetable tanning method. This artisan technique maintains a natural look of leather, leaving each piece with a slightly different pattern. So there will be only one bag like yours in the world. GIFTING EXPERIENCE: Our briefcase, elegantly presented in a luxurious gift box, is the perfect choice for those who appreciate style, quality, and thoughtful presentation. Let them unbox an unforgettable experience. BRAND:AFREEN FASHION
Product Description : Polyester staple fiber(1.2-1.5D,38MM) for Open-end yarn industry,color:black,white,off-white Price of product ( USD price or FOB price) : 0.98-1.4$ per Kg Product origin : China / Vietnam Key Specifications/Special Features ; Polyester staple fiber(1.2-1.5D,38MM) Place of Origin China/Vietnam Payment Term TT Delivery Time Shipment within 10 working Minimum Order Size and Packgaing details ; Packing 200 Kg Bales , Minimum Order Quantity 40HQ container
Polyester staple fiber(1.2-1.5D,38MM) for Open-end yarn industry, Color : black, White, Off-White Price of product ( USD price or FOB price) : 0.98-1.4$ per Kg Product origin : China / Vietnam Key Specifications/Special Features : Polyester staple fiber(1.2-1.5D,38MM) Place of Origin China/Vietnam Payment Term TT Delivery Time Shipment within 10 working Minimum Order Size and Packgaing details : Packing 200 Kg Bales , Minimum Order Quantity 40HQ container
Product Details Certification ISO-9001: 2008 Part Paws Temperature Temperature: (- 35 C) Temperature Of Warehouse: (- 17 C) During Transport Temperature: (- 15 C) Pack Quantity 1kg Shelf Life 12-24 months Packing Material Packed in Plastic Bags Additional Information Packaging Details Packing:27 MT and 1350 Cartons in 40ft Container. Halal Frozen(2 X 10) Poly Bag, 20 Kg. Carton box, poly bag / carton box No water retention Freezed in block form& OR Packing:27 MT and 1350 Cartons in 40ft Container. Halal Frozen(4 X 5) Poly Bag, 20 Kg. Carton box, poly bag / carton box No water retention Freezed in block form Weight Per Piece  30g -55g each size per piece 12 cm- 16cm Temperature  (- 35 C)Temperature of warehouse  (- 17 C)During transport Temperature  (- 15 C)Percentage of Broken bones  maximum 3% broken bone Black spots  maximum 2% black pad or ammonia bus Smell  No bad smell Moisture  Moisture content less than 3%Feathers off No bruises No excessive blood or blood stains Outer yellow skin off Well clean, washed & fresh Outer hard nail off Packing 27 MT and 1350 Cartons in 40ft Container. Halal Frozen(2 X 10) Poly Bag, 20 Kg. Carton box, poly bag / carton box No water retention Freezed in block form OR Packing â?? 27 MT and 1350 Cartons in 40ft Container. Halal Frozen(4 X 5) Poly Bag, 20 Kg. Carton box, poly bag / carton box No water retention Freezed in block form Delivery Terms CIF Basis Delivery time  14 days
Golden Harvest: Your Premier Maize Export Partner! Globally sought after for its versatility and nutritional value, maize, commonly known as corn, holds a significant place in culinary traditions worldwide. Maize cultivation has a rich history in regions like Goa, Maharashtra, and Karnataka, where it thrives under diverse growing conditions. Maize kernels come in various sizes and colors, with quality indicators such as color, aroma, and taste. Premium maize exhibits vibrant hues ranging from yellow to golden, signifying freshness and meticulous processing. The flavor profile of maize varies based on cultivation methods and environmental factors. However, it generally offers a sweet and slightly nutty taste, making it a versatile ingredient in both sweet and savory dishes. Maize is renowned for its consistent quality and serves as a staple ingredient in a wide array of culinary creations globally. Size: Small: less than 6.5 mm in diameter. Medium: 6.5 to 7.5 mm in diameter. Large: greater than 7.5 mm in diameter. Country of Origin: India Grade Standard: Grade A, Grade B, Grade C, Feed Grade Packaging Type: Bulk Bags, Jute Sacks Shelf Life: 12-18 Months Packing: Customizable Certifications: APEDA / FSSAI / ISO 22000 MOQ: 1000kg Binomial Name: Zea mays Family: Poaceae HS Code 10059000 / 1005.90.00 Here's a detailed description of these Maize: Size and Appearance: Evaluate the size and appearance of maize. Premium quality maize typically exhibits uniformity in size, with kernels ranging between medium to large. The color will be vibrant, with hues of yellow or golden, indicating proper ripeness and quality. Additionally, maize kernels will appear plump and well-formed, without signs of damage or discoloration. Aroma: While maize typically does not have a strong aroma like spices, it has a subtle sweet scent, especially when fresh. Maize with any musty or off-putting odors is avoided, so that it will not indicate poor quality or improper storage conditions
Nourishing World Markets: Premium Cashew Nut Exporter! Indian-origin cashew nuts are highly esteemed globally for their rich and creamy texture, making them a sought-after ingredient in various culinary traditions. Cashew cultivation in India has a long history, with regions like Goa, Maharashtra, and Karnataka being prominent producers. Cashew nuts typically range in size from medium to large, with kernels prized for their plumpness and well-formed shape. Quality assessment factors include color, aroma, and taste. Premium-quality cashews exhibit a light cream or pale yellow color, indicating freshness and proper processing techniques. The flavor profile of Indian cashew nuts can vary depending on growing conditions and processing methods. However, they generally boast a delicate, buttery taste with a subtle sweetness, making them versatile for both sweet and savory dishes. Indian-origin cashew nuts are renowned for their consistent quality and are a staple ingredient in a wide range of culinary applications worldwide. Size: W180 W210 W240 W320 W450 Country of Origin: India Grade Standard: Food Grade, A Packaging Type: Vacuum-sealed Bags, Tin Containers Shelf Life: 12-18 Months Packing: Customizable Certifications: APEDA / FSSAI / ISO 22000 MOQ: 100kg Binomial Name: Anacardium occidentale Family: Anacardiaceae HS Code 08013210 / 0801.32.10 Here's a detailed description of these Cashew Nuts: Size and Appearance: Premium quality cashew nuts typically have a uniform size and shape, with kernels ranging from medium to large. They are plump and well-formed, without any signs of shriveling or discoloration. The color of the nut is a light cream or pale yellow, indicating freshness. Aroma: The aroma of cashew nuts is an important indicator of their quality. High-quality cashews are emit a mild, nutty scent with hints of sweetness. Avoid nuts with rancid or musty odors, as they may indicate improper storage or processing. Taste: Cashew nuts have a delicate, buttery taste with a slight sweetness and a creamy texture. The flavor is well-balanced and free from any bitter or off-flavors. Moisture Content: Moisture content of the cashew nuts is balanced, excessive moisture can lead to mold growth and spoilage. The moisture content typically is around 5% or lower to ensure freshness and quality.
SKU Code : HC 317 Title : Stretchable Designer Blouse 3/4 Th Fabric Sleevs Attached Frill HSN Code : 6206 Transfer Price / pcs : $3.34 Fabric Type : Imported fabric Work Type : Printed Sleeve : Elbow Sleeve
SKU Code : HC 203 Title : Stretchable Designer Blouse 3/4 Fabric Sleevs Attached Frill HSN Code : 6206 Transfer Price / pcs : $3.33 Fabric Type : Shimmer Work Type : Printed Sleeve : Elbow Sleeve
SKU Code : HC 315 Title : Stretchable Designer Blouse Halh Sleeves Attached Frill HSN Code : 6206 Transfer Price / pcs : $2.67 Fabric Type : Imported fabric Work Type : Printed Sleeve : Half sleeve
SKU Code : HC 67 Title : Stretchable Designer Blouse With Long Sleeves Attached Frill HSN Code : 6206 Transfer Price / pcs : $3.34 Fabric Type : Cotton Lycra Work Type : Printed Sleeve : Elbow Sleeve
SKU Code : HC 316 Title : Stretchable Designer Blouse Halh Sleeves Attached Frill HSN Code : 6206 Transfer Price / pcs : $3.06 Fabric Type : Imported fabric Work Type : Printed Sleeve : Elbow Sleeve
Product Name : Ladies Blouse Product Description : 100% Viscose Ladies Blouse Price of product ( USD price or FOB price) : As Per Request Product origin : NOIDA, U.P, INDIA Key Specifications/Special Features : Viscose Blouse, Ladies Shirt, Ladies Top, Ladies Blouse. Ladies Tunic Minimum Order Size and Packgaing details : 1000 Pcs per Color/ Print
