1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 10 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 11 Built-in BMS management system with comprehensive protection and monitoring control functions 12 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 13 Main control MCU can be centrally controlled and manage peripheral settings (AC charger, inverter, solar charger) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable
Product Features: 1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 1 Small size and light weight, Maintenance-free 2 Environmental protection and pollution-free materials, no heavy 3 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 4 Built-in BMS management system with comprehensive protection and monitoring control functions 5 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 6 Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable
Twist locks are critical load bearing member of a container handling crane and are manufactured with utmost care incorporating quality checks at every stage of production. Salient features of twist locks are : 1) single piece forged construction from ni-cr-mo alloy steel (standardised for all twist lock applications). 2) quenching & tempering heat treatment for guaranteed physical properties & minimum impact strength of 27 joules -20 deg. Centigrade. 3) various destructive(tensile, impact) & non-destructive testings (ultrasonic & mpi) 4) 100 % proof load tested at double the swl and certified by a competent person under dock workers' regulations act, 1990 of india. 5) 100 % mpi tested after proof load test. 6) normal life in excess of 75, 000 container lifts. -
KHODIYAR INDUSTRIA PVT LTD is an ISO-9001:2015 certified Hot Forging & Machined Components manufacturing facility produce all grades of Brass, Copper & Alloys, Aluminium & Alloys, Carbon Steels, Alloy Steels & Stainless Steel in the weight range of 50 GMS to 35KG as a single part to suit your production requirements. We were established in 2014 & produce Forged & Machined components for OEMs in Heavy Engineering, Pump, Valve, Wind turbine, Automotive, Electrical, Aerospace Industry, Oil, Power & Gas, Material Handling, Construction & Mining Equipments, Defense etc., to list a few applications. Our Forge shop includes : a. 100 MT Screw Press Product weight:0.050 0.500 Kgs. + Equivalent Trimming Press (40 MT) b. 200 MT Screw Press Product Weight: 0.100 Kg to 2.000 Kgs. + Equivalent Trimming Press (75 MT) (Non-Ferrous 4 Kg.) c. 300 MT Screw Press Product Weight: 0.100 Kg to 3.000 Kgs. + Equivalent Trimming Press (100 MT) (Non-Ferrous- 5 Kgs.) d. 1 Ton Drop Hammer & 2 Drop Hammer e. Furnace : Oil, Electric, Gas & Coal. MACHINE SHOP 1. Vertical Machining center - BFW ( 800*550*500 MM ) BED SIZE with 4th axis 2. Vertical Machining center - HAAS make ( 800*550*500 MM ) BED SIZE with 4th axis & 3. Turning centers - up to 350 MM DIA. Jobs can be turned
GRIPHOLD® make, Heavy Duty, Single Hex Impact Socket, in 3/4 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Socket, in 1.1/2 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Socket , in 1/2 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Socket, in 2.1/2 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice amopng general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
Description: Automotive Gas Oil (AGO), commonly referred to as diesel fuel, is a vital component in the automotive industry, powering a wide range of vehicles, from cars and trucks to buses and heavy-duty machinery. Renowned for its efficiency, reliability, and versatility, AGO is the fuel of choice for millions of drivers worldwide. Key Features: High Energy Density: AGO boasts a high energy density, providing exceptional fuel efficiency and optimal engine performance, whether cruising on the highway or hauling heavy loads. Clean Combustion: Engineered for clean combustion, AGO minimizes emissions of harmful pollutants such as sulfur oxides (SOx), nitrogen oxides (NOx), and particulate matter (PM), ensuring compliance with environmental regulations and reducing environmental impact. Cold Weather Performance: Formulated with additives to enhance cold flow properties, AGO remains fluid even in frigid temperatures, facilitating reliable engine starting and smooth operation in cold climates. Engine Compatibility: Compatible with a wide range of diesel engines, including modern high-pressure common rail (HPCR) systems, AGO delivers consistent performance and reliability across various vehicle types and models. Long-Term Stability: Engineered for long-term stability and storage, AGO maintains its integrity and performance characteristics over time, minimizing fuel degradation and ensuring reliable operation even during prolonged storage periods. Target Audience: Private Vehicle Owners: Ideal for owners of diesel-powered cars, SUVs, and pickup trucks, AGO provides reliable fueling solutions for daily commuting, road trips, and recreational activities. Commercial Fleets: Trusted by businesses operating delivery vans, trucks, and buses, AGO offers cost-effective fueling options for fleet management, logistics, and transportation services. Construction and Agriculture: Essential for heavy equipment and machinery used in construction, agriculture, and mining, AGO powers tractors, excavators, and other diesel-powered vehicles with exceptional performance and reliability. Experience the Power and Efficiency of Automotive Gas Oil (AGO) for Your Driving Needs!
Diesel Gasoil EN-590 10PPM is a premium-grade diesel fuel that meets the stringent European Union standards for quality and environmental performance. With a maximum sulfur content of 10 parts per million (PPM), this ultra-low sulfur diesel (ULSD) offers exceptional cleanliness and efficiency, making it an ideal choice for modern diesel engines. Key Features: Ultra-Low Sulfur Content: Contains only 10 parts per million of sulfur, ensuring reduced emissions and enhanced environmental sustainability. High Energy Density: Provides superior energy density, resulting in improved fuel efficiency and engine performance. Engine Compatibility: Compatible with a wide range of diesel engines, including modern high-pressure common rail (HPCR) systems, ensuring optimal performance and reliability. Enhanced Lubricity: Formulated with additives to enhance lubricity, protecting critical engine components and prolonging engine life. Cold Weather Performance: Engineered to perform well even in cold weather conditions, with excellent cold flow properties for reliable starting and smooth operation in sub-zero temperatures. Benefits: Environmental Sustainability: By significantly reducing sulfur emissions, Diesel Gasoil EN-590 10PPM helps mitigate air pollution and minimize environmental impact, contributing to a cleaner and healthier environment. Improved Engine Performance: With its clean-burning properties and high energy density, this diesel fuel ensures optimal combustion, resulting in increased power output, reduced fuel consumption, and lower maintenance costs. Compliance with Regulations: Meets the strict quality standards set forth by the European Union for diesel fuel, ensuring compliance with regulatory requirements and avoiding costly penalties. Versatility: Suitable for a wide range of applications, including transportation, industrial, agricultural, and commercial use, providing versatility and reliability across various industries. Target Audience: Transportation Companies: Ideal for trucking companies, logistics providers, and fleet operators seeking to optimize fuel efficiency and minimize emissions in their diesel-powered vehicles. Industrial Users: Suitable for use in generators, machinery, and equipment in various industrial settings, offering reliable performance and compliance with environmental regulations. Commercial Businesses: Suitable for use in commercial vehicles, construction equipment, and agricultural machinery, providing dependable fueling solutions for daily operations. Make the Switch to Diesel Gasoil EN-590 10PPM and Experience Cleaner, More Efficient Diesel Power!
Our Poultry Feed Grade Zeolite is a top-quality, natural mineral specifically formulated for poultry feed applications. This premium zeolite provides significant benefits for poultry health and feed efficiency, making it an essential component in high-performance poultry nutrition. Chemical Composition: Silica (SiO): 65-70%, Alumina (AlO): 12-15%, Iron Oxide (FeO): 1-3%, Calcium Oxide (CaO): 1-2%, Magnesium Oxide (MgO): 0.5-1%, Sodium Oxide (NaO): 1-2%, Potassium Oxide (KO): 0.5-1%, Moisture Content: < 10% Physical Properties: Particle Size: 0.5-2 mm (adjustable based on requirements), Bulk Density: 0.7-0.8 g/cm, pH (in water): 7.0-8.5, Surface Area: 200-300 m/g Additive Levels: Recommended Dosage: 1-3% of total feed weight (adjust according to specific needs) Applications: Poultry Feed: Perfect for incorporation into feed for chickens, turkeys, and other poultry. Can be mixed directly into feed or used as a supplement. Poultry Housing: Effective in bedding and litter to control odors and maintain a cleaner environment. Key Features: Purity and Quality: Sourced from high-grade deposits, our Poultry Feed Grade Zeolite is processed to ensure exceptional purity and consistency. It adheres to rigorous quality standards, ensuring safety and effectiveness in poultry feed. Enhanced Digestion: Zeolite improves the digestive efficiency of poultry by enhancing nutrient absorption and reducing digestive disturbances. This results in better feed conversion rates and improved overall health. Toxin Absorption: The porous structure of zeolite effectively absorbs mycotoxins, ammonia, and other harmful substances in poultry feed, mitigating their negative impact on bird health. Odor Control: Zeolite helps control odors in poultry housing by trapping and neutralizing ammonia, contributing to a cleaner and more comfortable environment for your birds. Environmental Benefits: Using Poultry Feed Grade Zeolite helps reduce environmental pollution by converting ammonia into less harmful compounds, aiding in waste management.
ABOUT OUR PRODUCT: Discover our eco-friendly Paper Bags & Packaging solutions, meticulously designed to meet your packaging needs while minimizing environmental impact. Crafted from high-quality paper materials, our products uphold our commitment to sustainability, offering a greener alternative to conventional plastic packaging options. RANGE OF PRODUCTS: Our range of Paper Bags & Packaging encompasses a diverse array of options tailored to various industries and purposes. From sturdy paper bags for retail and grocery use to custom-printed packaging solutions for branding and promotional needs, we offer versatility and reliability in every product, providing comprehensive solutions for shipping, storage, and presentation requirements. Brown V-bottom Paper Bags: Material â?? Kraft Paper. Features â?? Recyclable, Available in multiple sizes White V-bottom paper bags: APPLICATION: Ideal for businesses, retailers, and individuals alike, our Paper Bags & Packaging products serve a multitude of purposes across different sectors. Whether youâ??re packaging goods for sale, shipping parcels to customers, or presenting gifts and favors at events, our eco-friendly paper solutions offer a sustainable and aesthetically pleasing option. Furthermore, our customizable packaging options allow for branding and personalization, helping businesses leave a memorable impression while promoting environmental responsibility. FEATURES: Sustainability: Our Paper Bags & Packaging solutions are made from renewable and biodegradable materials, reducing reliance on single-use plastics and minimizing carbon footprint. By choosing paper-based packaging, you contribute to environmental conservation and support a circular economy. Versatility: With a wide range of sizes, shapes, and styles available, our products cater to diverse packaging needs across industries. Whether you require small paper bags for boutique items or large packaging, we have the solution to fit your requirements. Durability: Despite their eco-friendly nature, our paper-based products are durable and resilient, capable of withstanding the rigors of handling and transportation without compromising on quality. Rest assured that your goods will be safely and securely packaged in our reliable paper solutions. Customization: We offer customizable packaging options, including printing services for logos, branding elements, and promotional messages. Personalize your paper bags and packaging materials to reflect your brand identity and communicate your values to customers effectively. Cost-Effectiveness: Our Paper Bags & Packaging solutions provide a cost-effective alternative to traditional packaging materials, offering competitive pricing without sacrificing quality or sustainability. Reduce overhead costs while enhancing your brand image with our affordable and eco-friendly packaging options.
Shingare Industries (ISO 9001 Certified Company) is the leading Manufacturer and Exporter of various engineering goods such as Impact sockets are mainly used to empower the work efficiency of impact wrenches and drivers. Impact sockets wrenches are used to add or remove nuts or bolts in vehicles by applying a great amount of torque. As this type of torque can vary on a large scale, so normal sockets cannot tolerate the impact very well. Bhartiya distributor Impact Sockets, by nature of their application are subject to extreme stresses, therefore special application sockets such as thin wall, hex driver, accessories and slugging wrenches are specifically excluded from the replacement warranty.
Our primary interest is the supply of single-colour PVC as reprocessed granules. However, we can also supply PVC derived from shutters, profiles, and pipes in grind form with maximum dimensions of 10-14 mm. You can see the input material in the attached JPG file. Here, we have four qualities. Below FOB a) Reprocessed Granules $ 700 MT b) washed, demetallized, dedusted, maximum impurities 1% $ 450 MT c) Demetallized $ 300 MT d) Only shredded with impurity 1/2 % $ 280 MT
Price - Rs 999.00 Type: Laddu Gopal ki Murti Religious Idol & Figurine Material: Brass Suitable For: Table Dimensions: 3.2 x 3.3 Inches Weight: 300 gm Laddu Gopal ki Murti : An Exquisite Representation of Lord Krishna The Brass Laddu Gopal ki Murti idol made by Shreeyaash Handiworks is a wonderful portrayal of Lord Krishna in his life as a youngster structure, normally known as Laddu Gopal. This brass design is an ideal expansion to any home or sanctuary, carrying with it the endowments of Lord Krishna and a feeling of harmony and concordance. Introduction to Brass Laddu Gopala The Brass Laddu Gopal ki Murti idol made by Shreeyaash Handiworks is a wonderful portrayal of Ruler Krishna in his life as a youngster structure, normally known as Laddu Gopal. This brass design is an ideal expansion to any home or sanctuary, carrying with it the endowments of Master Krishna and a feeling of harmony and concordance. Crafting of Laddu Gopal Murti The Brass Laddu Gopal ki Murti symbol is made utilizing the customary lost-wax projecting strategy, which includes making a form of the ideal figure utilizing a combination of wax and different materials. The form is then covered with a combination of mud and sand to make a shell, which is then warmed to liquefy the wax and make a void in the shell. Liquid brass metal is filled the void, filling the shell and making the ideal model. When the brass mold is finished, the gifted craftsmans of Shreeyaash Handiworks start the method involved with getting done and cleaning the piece. The subtleties of the model are painstakingly created utilizing different instruments, including etches and pounds, to make the ideal examples and plans. The figure is then cleaned to give it a smooth and gleaming completion. Significance of Brass Laddu Gopal Murti The Brass Laddu Gopal ki Murti icon is a critical portrayal of Master Krishna and is accepted to bring harmony, congruity, and thriving into one's home or sanctuary. Master Krishna is venerated in Hinduism for his lessons on affection, empathy, and dedication, and is viewed as a defender and nurturer of every single living being. The lively type of Laddu Gopal is likewise huge, addressing the honest guiltlessness and virtue of Master Krishna. The Laddu, or chunk, in his grasp is representative of his adoration for dairy items and is in many cases utilized in Hindu customs and functions as a proposing to Ruler Krishna
T Socket Wrench Item No.: M01502 Specification: 6mm 7mm 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm
Cast Steel Lubricated Plug Valve Pressure Rating : Class-150 Material : Cast Steel (WCB) Description : Short Pattern, Lubricated Plug Ends : Flanged Operator : Wrench, Gear, Electric, Pneumatic Item Code : CCS00013 Size : 25mm Notes : Available Valve Size : Class-150 25mm to 200mm Class-300 25mm to 200mm
Below are some important characteristics of PC plastic beads: PC has good light transmittance, like glass, making it used in many applications that require high transparency. � PC is very impact-resistant, which reduces the risk of cracking and breaking. This makes it a popular choice in the production of materials that require high durability. PC is resistant to high temperatures, can even withstand temperatures nearly 150 degrees Celsius (302 degrees Fahrenheit) while still maintaining its mechanical properties. It is quite resistant to many chemicals, increasing its versatility in specific applications. Application: PC is commonly used in the production of automotive parts such as headlights, mirror covers, engine guards, and interior parts due to its good impact resistance and high transparency. PC\'s transparency and high temperature resistance make it an ideal material for LED lenses and surface protection. PC is used to manufacture electronic circuit boards, sockets and electronic covers due to its fire and chemical resistance. PCs are often used in manufacturing the outer casings of electronic devices such as cell phones, laptops, and other telecommunications devices. PC can be used to manufacture products such as cups, food containers, kettles, and other household products. Because of its good impact resistance, PC is often used in the production of goggles, safety helmets and other personal protective products.
MRCOOL DIY 36K BTU Ductless Mini Split Heat Pump Complete System Energy Star 4th Gen DIY-36-HP-WM-230C25 Key Features: Up to 18 SEER efficiency Gold Fin condenser: Corrosion-resistant, ideal for coastal environments Variable-speed DC inverter compressor: Reduces operating costs R-410A refrigerant: Environmentally friendly Standard 7-year compressor/5-year parts warranty with optional registration for a limited lifetime compressor warranty The MRCOOL 4th Generation DIY 36K BTU, 18 SEER Ductless Heat Pump is one of the most powerful single-zone systems in the DIY Series, designed to heat and cool areas up to 1,500 sq. ft. This complete system includes a 36K condenser, 36K air handler, and a 25 ft. pre-charged line set filled with R-410A refrigerant. With its impressive 18 SEER efficiency rating, it delivers exceptional performance while remaining energy-efficient. What makes this system even more appealing is its easy DIY installation. Thanks to the patented MRCOOL Pre-Charged Quick-Connect Line Set, homeowners can install the system using just a few hand tools, making refrigerant piping connections as simple as turning a few wrenches. Beyond performance and ease of installation, this system boasts multiple operational features. Users can choose from six operating modes: AUTO, HEAT, COOL, FAN-ONLY, DRY (dehumidification), and SLEEP, ensuring customized comfort for every situation. The "Follow Me" function continuously adjusts the room temperature based on the reading from the handheld remotes location, maximizing comfort. Additionally, the system can be controlled remotely via the Smart HVAC app, compatible with both Apple and Android smartphones. MRCOOL backs this product with a limited lifetime compressor warranty, offering long-term peace of mind.
Available types of PBT Compound plastic: Colored PBT PBT GF Reinforced Fiberglass â?¦ Application: Applications of PBT Compound plastic pellets include: Automotive Applications� : PBT Compound is widely used in the automotive industry to manufacture parts such as engine parts, interior parts, cooling system parts, and electronic parts due to its ability to Good heat resistance, impact resistance and chemical resistance. Electronics� : In the electronics industry, PBT Compound is used to produce protective covers, insulators, and other parts of electronic devices such as converters, sockets, and controllers. Household applications� : PBT Compound is also used in the production of household products such as door locks, water pipes, and straws thanks to its good mechanical properties and heat resistance. Other industrial applications : Besides the above applications, PBT Compound plastic pellets are also used in many other industrial applications such as manufacturing medical equipment, household appliances, and mechanical parts. With stable mechanical properties, heat resistance and chemical resistance, PBT Compound plastic pellets are a popular choice for many industrial applications requiring high technical properties.
