Shredded Talked with 1% attachment
Origin: Taiwan
Load in 40" 22 TOns +/-1
Quantity: 300 tons monthly
Payment term: 100% LC or T/T
Contact us for further discussion.
Products Used Radiator scarp
Copper Content 99.9%
Material
Copper/Aluminum
Dimensions 914mm x 914mm x 12mm
Core dimension
360x688x32mm
Inlet 35mm
Outlet 35mm
Grade AA
- Temper : 'O' 1/2 H
- Tensile Strength : 340 Min-400 Min
- Elongation % on 50 mm G.L : 40 Min
- Vickers Hardness VPN : 80 Max/95 Min-120 Min
- Cu -: 58% - 60%
- Pb -: 1.5% - 2.5%
- Imp -: 0.3% (Max.)
. Technical terms: USED RAIL R50-R65
2. Specifications and Chemical
Composition:
Used Rail: R50 (51.67KG/Meter, GOST 7173-55),
Used Rail: R65 (64.72KG/Meter, GOST 8161-75).
Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyera s instruction; Expenses on seller
Width: 5.5 inches ; Weight: 64.72Kg.
No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight.
No pitting.
Only atmospheric rust
No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
187156 Metal Bucket Suppliers
Short on time? Let Metal Bucket sellers contact you.
The third-generation Hastelloy alloy alloy20 is one of the more commonly used components in the C series. Due to its low nickel content, low cost, excellent mechanical and corrosion resistance, it is widely used in pump flow components where corrosion and wear coexist. The solubility of hardness in the ferrite phase reaches its maximum at 850, and as the temperature increases, the solubility increases rapidly and is much smaller than that of the austenite phase. The Cu content in c-276 has exceeded the high solubility in the ferrite phase.
The Hastelloy alloy alloy20, formed by a large amount of Ni element composition, is used in industries such as chemical engineering, pharmaceuticals, seawater, fertilizers, and other industries for projects with high corrosion resistance requirements due to its unique characteristics that lie between ferrite and austenite structures, and its resistance to intergranular corrosion. In recent years, the nuclear power industry has developed a corrosion-resistant ability in the operation of power station equipment, which cannot be replaced by other materials. Containing a large amount of Cr component, with high oxidation resistance.
The molybdenum element in stainless steel materials is only about 2%, which is far less than the molybdenum content of Hastelloy alloy alloy20. Therefore, high concentration acidity requires the use of materials well. Mainly used, it has the following corrosion resistance properties in oxidation and reduction, and excellent corrosion resistance to most corrosive media. In this oxidizing environment, such as in sulfuric acid manufacturing and solutions containing a large amount of oxidizing ions, it has excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion.
Product name
ALLOY 20 STAINLESS STEEL
Thickness range
0.3mm-3.0mm,
Width range
600mm-1500mm
Length
2000mm, 2438mm, 3048mm
Size
1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required
Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Use of INCOLOY Alloy 825: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 �° C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.
INCOLOY Alloy 825
Standard
Food Grade Sanitary Tube: JIS G3447, KS D 3585, ASTM A270, EN 10357(DIN 11850), AS 1528.1, ISO 2037(NF A49-249)
Industrial pipe: ASTM A312, EN 10217-7, GB / T 12771-2008, HG 20537.3
Drinking water tube: GB / T 19228
Mechanical tube: ASTM A554, EN 10296-2
Size
Outer Diameter Range: 9.5~2000mm
Thickness Range: 0.5~20mm (Size can be customized.)
Length: Up to 11.8 meters per piece.
Shape Section
Round, square, rectangular
Usage
Sanitary tubing: for food processing industry, beverage industry, sugar mill and so on;
Heat exchanger tube: condenser, boiler, super heater, evaporator and so on;
Industiral pipe: for petroleum delivery, gas delivery, petrochemical industry, wastewater treatment, drainage system, and so on;
Mechanical tube: handrail, railings, balustrade, hence and so on.
Features:
1.Our stainless steel tubes pipes are treated by bright annealing, inside weld bead removing, precise polishing. The roughness of tubes could be under 0.3�¼m.
2.We have the non destructive testing ( NDT ), eg. online eddy current inspection and hydraulic or airtightness testing.
3. Thick welding, good appearance.The mechanical properties of tube could be tested.
4. And Our tubes are certificated by AD 2000-W0, PED 2014/68/EU, ISO 9001 : 2015.
5. Full material traceability is guaranteed during the manufacturing process.
6. Polished tube is supplied in individual plastic sleeves with capped ends ensuring optimum cleanliness.
7. Internal Bore: Tubes have a smooth, clean and crevice free bore.
Our Engine Heads are sourced from trusted suppliers, offering high durability and quality for various automotive applications. Perfect for export, they meet international standards, ensuring reliable performance and long-lasting use.
Chemical Composition: Al
Weight: 20/25kg
Al (Min): 99.7%-99.9%
Place of Origin: UK
Appearance: silvery white Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of ingot is clean and smooth.
Grade
Chemical Composition %
Impurities
Si
Fe
Cu
Ga
Mg
Zn
Mn
Others
Sum
Al99.9
0.50
0.07
0.005
0.02
0.01
0.025
--
0.010
0.10
Al99.85
0.80
0.12
0.005
0.03
0.02
0.030
--
0.015
0.15
Al99.7
0.10
0.20
0.010
0.03
0.02
0.030
--
0.030
0.30
Al99.6
0.16
0.25
0.010
0.03
0.03
0.030
--
0.030
0.40
Al99.5
0.22
0.30
0.020
0.03
0.05
0.050
--
0.030
0.50
Al99.00
0.42
0.50
0.020
0.03
0.05
0.050
--
0.050
1.00
25 kg specification: Product Name: Aluminum ingot for remelting (AL99.70) Dimensions: about 823*183*110 mm Weight: about 25 kg Bale weight: about 1050kg Each delivery unit (25 tons) : 23 bales Packing material: 0.9 x 32 mm steel strip, surface treated with anti-rust. "#" shape binding, binding firm. Execution standard: GB/T1196-2008 standard in the AL99.70 provisions
The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00.
Made from high-quality metal.
Excellent for household and construction use. All the metal buckets are manufactured in Ukraine with providing the technological innovations.
The sizes: 7L, 10L, 12L and 15L
PP CUPS, BUCKETS BALES 550 EURO/MT FAS THESSALONIKI PORT GREECE.
Post consumer.
Can load in 1x40' HC container aprox. 26- 28 MT (�± 10%).
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m)
Used Rails shall be considered free of alloys when the residual alloying elements do not exceed
Cut to 1.5 meter length (standard)
1. Technical terms: USED RAIL R50-R65
2. Specifications and Chemical
Composition:
Used Rail: R50 (51.67KG/Meter, GOST 7173-55),
Used Rail: R65 (64.72KG/Meter, GOST 8161-75).
Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller
Width: 5.5 inches ; Weight: 64.72Kg.
No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight.
No pitting.
Only atmospheric rust
No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
