Magnetic Separator&Belt Conveyor Scrap Crusher Iron Chain Feeding Conveyor It is scientifically designed and reasonably configured following customized schemes on customersfield ,output,material types and so on.It is high in automation; Monitored by computer,PLC control,safe,high-efficient,conservation of labor; Over 90% are produced by the component;quality materials are used for key components;it has exquisite techniques that are more solid and durable; All-out environmental supporting facilities on shock absorption,noise reduction and dust removal help bring down second-time pollution Remote diagnosis24 hours of uninterrupted after-sale service.
Roll Magnetic Separator is a kind of dry magnetic separator with high intensity, permanent magnet, roll-type. Roll Magnetic Separator is used for enrichment and purification of materials with a grain size of 0.1 to 25 mm and at the low magnetic sensibility. Magnets made from an alloy of rare earth elements used in the production are more powerful as compared. The magnet with this feature and the special magnet sequence on the magnetic roll consists of high gravitational forces. The resulting high magnetic attraction forces make it possible separation with high efficiency magnetic minerals with low magnetic sensitivity and very fine sizes.
It is used for deferrization of ceramic raw materials and industrial raw materials, operation of ore enrichment also be used. In addition, it is used for cleaning of high-quality quartz, magnesite enrichment, evaluation of the beach or mineral sands,cleaning of limestone dolomite, cleaning of foundry sands, cleaning of refrakter raw material, enrichment of boron, enrichment of chromite, bauxite, feldspar cleaning, clay cleaning, glass sand cleaning.
Introduction of magnetic separator RCYD series tramp iron separators are specially designed to clean tramp metals from the products conveyed by the belt, vibratory feeders or inclined planes. Such separators are mainly used to protect machines from ferrous particles and other iron tramps. Such Permanent magnetic overband separators are used when an automatic removal of ferrous particles is a requirement. Our separators are designed to operate at a predetermined working gap over the conveyor, which could be customized also. We consider various parameters while choosing the type of Overband, such as:1Nature of the product 2 Its density 3Its granulometry 3 Sizes of the pieces ;This machine is widely used in cement, chemicals, plastics, coal, refractory , building materials, food and other industries. Features of magnetic separator 1. Excellent magnetic field intensity, usually used in occasions with much iron. 2. The wholly sealed structure makes the remover water-proof, dust-proof and corrosion resisting. 3. Low energy consumption. 4. Easy to install and convenient to use. 5. High efficiency and stable performance. 6. High processing capacity. 7. Good operational reliability and flexibility. Sketch drawing of magnetic separator price
1. 5CX-5II high-performance magnetic election graders is to separate clods from grain. 2. When materials pour in a closed strong magnetic field, they will form a stable parabolic movement. Due to the different strength of attraction of the magnetic field, clods and grains will be separated.
It is to separate clods from grain. When materials pour in a closed strong magnetic field, they will form a stable parabolic movement. Due to the different strength of attraction of the magnetic field, clods and grains will be separated. 1.Whole Structure of the Machine It consists of rack, grain inlet, grain outlet, driving shaft, magnetic roller.
Material: ferrite Grade: y30bh Dimensions: 150lx100wx25t mm Tolerances: 0.2mm Plating/coating: no Magnetization direction: axial (through 25mm) Max operating temp: 482of (250oc) Application: separator magnet With the high speed of replacement of electronic products and the dwindling of non-renewable resources, more and more people begin to pay attention to the electronics recycling industry. Walking in a residential area, you will find people sitting on the road side with the billboard of home electric appliance recycling. Japanese is using the recycled aluminum, iron and other resources to build their own "urban mines". Compared with the country which only uses their nature resources, japanese is wiser. The magnetic separator is equipment used on recycling industry to distinguish the ferrous and non-ferrous, copper, aluminum and plastic. Their work mainly depends on the function of magnetic force and alternating magnetic field. There are hard magnet and soft magnet. The magnet used on separator is hard magnet. Hard magnet is classified into five categories: sintered ndfeb, bonded ndfeb, ferrite, samarium cobalt, alnico. Only strong magnetic force can separate metal and non-metal apart. According to this, separator magnet is generally sintered ndfeb. At the same time, to consider magnet cost, big block ferrite is also an option. Samarium cobalt, alnico, and bonded ndfeb are not strong enough on magnetic force and high cost, so don t in considering the scope. The shape of separator magnet is block. Like ferrite, the size is 6 . The size of sintered ndfeb depends on the design of magnetic equipment manufacturer. Every company will choose size and grade of permanent magnet according to their application. 1. To delivery by air or by express: anti-magnetic package (six sides iron sheets in the carton); 2. To ship by sea: normal hard paper carton and pallet; 3. To as per clients' special requirements.
RCYQ series hoisted strong permanent magnet separators | Series Permanent magnetic Separators RCYQ series hoisted Separators(suspended separator)is a simple structure easy to use,reliable operation,the effect of a good mag- netic separation devece.which by the magnetic system,shell cover and other components. Application: Permanent elections are mainly used in all kinds of iron belt transport planes,suspended from the blanking-iron to achieve eiectora purpose for the special cement indrstry,the coal chemical industry,samll-scale mining, building materials, wood processing, building sand arnd other form of compound,and to ensure that the procedures carried out smoothly.
CTB(S,N) Wet Drum Permanent Magnetic Separator in pioneers is suitable for concentrating magnetic materials from non-magnetic materials by the difference of mineral magnetic coefficient and the machine magnetic system and mechanical drive. CTS magnetic separator is downstream type magnetic separators, CTN model is called counter-current type magnetic separator and CTB model is normally named as semi-countercurrent type magnetic separator.
Decription Magnetic separator is used in recycling powder particle removal of iron powder . The advantage of dry magnetic separator : Mineral processing without water: due to the dry magnetic separator without water, one production line can save 4000 tons water each day and 2.4 million tons of water can be saved every year, at the same time without sewage production. Perfect separation effect: machine adopted by dynamic design, no residue in the drum no matter magnetic material slide, displacement or tumbling on the surface of the drum. Thus excellent on material sorting, and selection grade can be increased 3 to 6 times, and featured grade can get over 65%. Powerful processing capability: due to our company adopt open magnetic system, no material reunite and blocking occurring, it can get powerful processing capability.Each magnetic rougher can process 2000-4000 tons of ore every day, and multiple machines can be used parallel, which can be doubled to increase production. Widely industry adapted: our products through the application of digital technology and inverter technology, increased the variety of dry separation and the range of applications. It can be divided into four main categories, more than 20 varieties and specifications which can satisfied different industries¡¯ demand on a variety of iron ore, sand, slag, tailings, steel ash, sulfuric acid residue, abrasive, refractory materials, plates, rubber and food. Part of the equipment can be used multiple. High production results:dry separation without water, thus no water source limitation and year-round continuous production, especially suitable for waterless regions where seasonal water shortage, cold areas, it can increase 100-150 working days every year, effectively improve equipment utilization and production yields. Weight 1.2t drum size 800*1800
High-frequency vibrating screening filter with magnetic separator Application: This product, with functions of producing, grading and filtering the slip material, powder material and granules, can be widely applied in a variety of settings : food, medical, chemical, grinding compound, ceramics, mining, painting, metallurgical, geological, geological, national defense and electronic industries etc. Features: The high- frequency sieve, developed and produced by our company, is of high efficiency, small oscillation amplitude, little noise, high screening frequency. There is a different working principle compared to ordinary screening devices. Because of high frequency, it is able to destroy the pulp surface strain and hinder small grain materials vibrating at high speed on surface, able to accelerate to separate useful mineral in great density and generate a vibration of the screening cloth of small amplitude. Thus this unique characteristic has created better separating condition to make easy the passage of the powder grains through the screen holes especially large proportion grain and slurry; Each high frequency sieve is loaded with a piece of rack that is movable at will in the operational site whose height is regulated, lt does not need to carry on the complix installment, easy in operation but hard to damage; That ip54 protection rank, f level insulation and 24 hours work system prolongs the usage life of electrical machinery and assures regular operation in bad environment.
Mas baiyun ctb wet drum separator is newly developed iron ore concentrating equipment under wet conditions.It has been designed by engineers having a wealth of knowledge and data, gained over many years of wet drum applications and experience. We offer a complete service to mining and mineral industries. Our wide and competitive wet drum separators allow us the freedom to select the correct size and type to meet precisely your process needs in the best techincal and cost effective manner. This kind of magnetic separator can provent the final product from the secondary contamination because of the washing action adopted in the processing. It is equipped with a respective spray pipe for feed and concentrates, and water amount can be adjusted so as to assure suitable density of the concentrate. It can be equipped with cocurrent, counter-rotation and counter current tanks, and equipped double drums or three drums according to requirements of customers. Plastic packing
Strong induction intensity The equipment has high magnetic induction intensity to attract the ore with size up to 350mm, and can be applied with various model belts according to the customersí» demands.It is mainly used at the preseparation Stage to rejecting excess gangues. Maximise recovery of ferrous metals High performance magnet design to suit your application (ferrite, rare earth) to provide the most effective and efficient method of metal recovery. Minimise maintenance Wear resistant non-magnetic drum skin. Permanent magnet drums are built using high intensity non-deteriorating material, so not only is no power required to the magnet, but it will also provide maximum magnetic force for the lifetime of the machine. High permeability magnetic circuit to minimise stray magnetic fields, prolonging their life. Optimise throughput Deep field magnet systems penetrate through the product burden and remove the maximum amount of ferrous metal. This allows for a higher throughput of material to be separated efficiently. Plastic ppacking
For -100mesh silica sand, downstream feeding method is adopted(7 is feeding inlet,5 for outlet). Slurry magnetic separator adopts intermittent working method. When slurry is fed,4# valve close, then slurry comes through 7# valve to enter into working chamber, coils in working chamber will generate strong magnetic force to attracted the paramagnetic particles to magnetic medium(2),non-magnetic matter will go through 5# valve and then lead to concentration pond. After running for a period,5# valve will close,7# inlet valve close and 4# valve opens, and turn off the power of coils(no magnetic field this time),then open run motor of vibrator,flushing pump, under the action of 8# vibrator and 1# flushing water, paramagnetic particles will be discharged from 4# valve, after this has been done,7# valves is open,4# valve closes,5# is open, and a circulating circle is done. Coil Coils of made of copper with pureness above99.95%, no usage of aluminum or other alloy substance has been used. Copper coils is purchased and checked as per National Standard GB/T1527-2006, GB/T 20301-2006.conductivity of coil is 10% higher than general ones. Coils are dipped into transformer oil, to decrease the temperature of coils quickly and steadily, circulating device is equipped with external heat exchanger.it guarantees that the outlet cooling water of coils is less than 62 Celsius degrees, thus magnetic field fluctuation is under reasonable control range. Magnetic medium: magnetic medium is made of special iron substance, after special treatment, permeability has been enforced, after power off of coils, there is no remanence. Density of magnetic medium is winded according to the product mesh of user, when slurry goes through magnetic medium (Fig 1, right), paramagnetic particles have been attracted to it, and then the beneficiation has been improved.
Sorting Plants--High moisture commingled municipal solid waste in developing countries. With over 10 years of experience in municipal solid wastes in developing countries, which features high organic content and commingled components, is a pioneer in getting these waste recycling plants to survive and grow along with the economy. single waste sorting line capacity ranges from 5 to 50 tons per hour upon project request.
Advantages of magnetic separator: 1)Newest CTB series magnetic separator In China 2)Simple structure, high yield; 3)Covenient operation; 4)Granularity blow 0.5m Application of magnetic separator: Newest STB Series magnetic separator In China. This series of products is used in wet magnetic separation of materials with granularity below 3mm like magnetite, pyrrhotine, bake ore and washingtonite. It is also used for deironing materials like non-metal ores, coal and building materials. Average magnetic induction of barrel surface is 100-600mT. According to customer's demands, it can provide magnetic separation with different magnetic induction like forward flow, semi counter flow and counter flow. The products have features, such as simple structure, high yield, convenient operation and easy maintenance. Characteristics of Magnetic separator: The products have geatures, such as simple structure, high yield, convenient operation and easy maintenance.
Application: 1).Used for pre-concentration in the magnetic separation mill, remove the waste stones out of the ore and restore iron grade. 2).Used to recover iron ore from the tailings and increase the utilization rate of ore resources. 3).Used for the iron and steel factories. Handle the discarded steel slag and mill scales to recover the iron. Working principle: When the ore pulp flow into the magnetic field, the strong magnetic minerals are adsorbed on the surface of the drum. The weak magnetic and non-magnetic minerals are cast off and discharged, while the strong magnetic minerals on the surface of the drum rotate with the drum and will be brought out of magnetic field to complete the sorting operation.
Magnetic pulley are positioned at the head of belt conveyors to extract metal contamination from the product on the belt. As the roller rotates, it holds the tramp metal while clean product is discharged. Finally as the belt leaves the roller, the magnetism dissipates, and the unwanted contamination falls from under the belt into a separate receptacle. This type of magnet acts as secondary protection for deeply embedded metal in the product, which may have not been initially extracted by an overhead suspension magnet.
Magnetic parts Chou mag is an expert on assembling all kind of magnetic systems, such as pot magnets, filter bars, grid magnets, magnetic separators, magnetic catchers, channel magnets, lifting magnets and other magnetic devices. We can produce the device as your drawing or sample you send us. We also are glad to help you solve the problems on magnetics.
Drum type magnetic separator is most useful for separating tramp iron from non magnetic material processed in bulk quantity, for the purity of end products, recovery of metal having commercial value and protection of processing plant and machinery. These are widely used in all the processing industry for separation of iron contamination from minerals, chemicals, food, flour, plastics, grains, sand, cement, fertilizers, abrasives, glass, slag, ores, rock, refractory and many other products. Salient features: - drum consists of high powered anisotropic permanent magnet - strong & rugged construction. - automatic separation of ferrous material. - completely enclosed design to avoid dusting and pollution.
