Br:10.8-11.0kgs Hci:18-25koe Tw:300 degree temperature. More info pls contact alger*ngyc/com
Magnet This is a catalogue: Grade : n35~n45, n35m~n48m, n35h~n45h, n35sh~n42sh, n28uh~n35uh, n28eh~n35eh. Ring magnet nickel/zinc plating d1.5~d50 mm diameter d0.5~35 mm inner diameter Radial oriental ring magnet, as d26xd20x14mm. Rod magnet d1~d40 mm diameter Block magnet, we can make small holes like 0.5mm~2mm diameter in the magnets. Arc magnet for motors, 100~200 cels temperature use, very good re-corrosion. Sphere magnet with 0.3~5 um gold/silver plating d3~d30 mm diameter Ellipsoid magnet with 0.3~5 um gold/silver plating, long axis:8~20mm short axis:6~15mm Pot magnet and other magnetic appliance, cow magnets, magnetic toys. Alnico magnet, alnico 2/5/8. Ferrite magnet, c5/c8 etc. Filter magnet, made of stainless steel and rare earth magnet, 8000~12000gs. Flexible and rubber magnet, for motors. Standard sea transfer packing
Magnet N35, n40, n45, n50, n52, etc,
Product Type : ICUMSA 45 Material : SUGAR Polarisation : 99.80 % Ash Content : 0.08 % Solubility : 100 % dry and free flowing Radiation : within internationally accepted limits Color: Sparkling white Granulation : fine crystal Moisture : 0.8 % Max Magnetic Particles 4 mg / k So2 Content 70 mg / k Ash by electrical conductivity 0.04 % max ( on dry basis ) Sulphur dioxide 20 mg / kg min
We supply many kinds of permanent magnets, including NdFeB, SmCo, AlNiCo & Ferrite for over 30 years. More than that. we are sure that we can help you on your new products development with our expertise, design & supply the complete magnetic assemblies and components for our clients, and have the trustworthy and professional engineering capabilities of magnetic solutions.
Magnetic Stirrer Digital LCD Display Last Measurement in Memory Heating Stirring can proceed Simultaneously Bushless Motor for Low Noise Anti scratch and Corrosion Resistance Ceramic Plate Surface ABS Cabinet Brand Labtical Model NameNumber MS5LH Type Magnetic Stirrer Speed range 1002000rpm Maximum mixing capacity 5000 ml Temp Range Accuracy 300C Accuracy 1C Temperature Sensor PT100 Time range 099h99min Top Plat Size 168 x 168mm Display LCD Motor Type Bushless Motor Operating Mode Temperature Speed Timing Memory last data Power 500W Power Supply AC 220V 5060Hz Packing Dimension 335 x 235 x17cm Weight 25kg
Magnetic Sticks and Balls (36/68/88/100/128pcs) Material: ABS & Magnet Color: Various/ Customized Certificate: EN71 / ASTM Function: magnetic ball toy Packing: Plastic box
Material: ABS & Magnet Color: Various colors Quanitiy: 100pcs/box Function: Magnetic marble run Packing: Color Box
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
Rubber Coated Mounting Magnets With Internal Threaded Bushing The rubber-coated mounting magnets with internal(female) threaded stem/bushing(shorted as internal thread rubber-coated mounting magnets) offer magnetic bases for waterproof magnetic ceiling hooks and rustproof holding magnets for outdoor use. All the internal thread rubber-coated mounting magnets are made with N35 neodymium material, which produces the strongest strength. For different applications, you can screw different threaded hooks and lifting rings into the internal thread post. The Uses Of Internal threaded bushing magnets: Internal thread rubber-coated mounting magnets are used for various ceiling lamp mounting and holding. Rubber-coated mounting magnets with internally threaded bushing are used for fixing and mounting automobile advertisements, lightboxes, and speakers. Rubber-coated mounting magnets with female threaded stems are used for the installation and fixation of industrial tooling and factory equipment. The Characteristics Of Internal threaded rubber bushing Magnets: 1, Multipole magnetic circuit design to strengthen the magnetic force of the round magnetic bases 2, Waterproof and corrosion-resistant outside coat, which extended the service life of the rubber-coated neodymium mounting magnets. 3, Variable size for the round base and threaded hole, which give different holding forces to the rubber-coated mounting magnets. 4, Different hooks and ring fasteners can be used, which make the rubber-coated magnetic base suite for different applications of holding, clamping, and mounting. If you are looking for a reliable magnets manufacturer, don't hesitate to contact us!
MOQ : 100 Pack Business Type Distributor Country of Origin India Size Standard Type Magnetic Product Details Material Metal, Plastic Color Available in Many Colors Technics Machine Made Pattern Plain Finishing Polished Brand Name Office Mate
Product name : Custom Super Strong permanent N52 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35SH,N45SH,N30UH,N38EH Tolerance in size : +/-0.1 mm
Product name : Custom Super Strong permanent N52 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N38,45H,N40SH,N42SH,N33UH,N33EH Tolerance in size : +/-0.1 mm
Product name : Custom Super Strong permanent N54 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : 45M,38H,N40SH,N33UH,N35EH Tolerance in size : +/-0.1 mm
Product name : pot magnet Custom Super Strong permanent N50 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35,N38,N40,N42,N45,N48,N50,N52 Tolerance in size : +/-0.1 mm
Product name : Custom Super Strong permanent 48H Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N38SH,N42SH,N35UH,N38EH Tolerance in size : +/-0.1 mm
Product name : Disc magnet, Custom Super Strong permanent N52 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N52,48M,N45SH,N35UH,N38EH Tolerance in size : +/-0.1 mm
Product name : Disc magnet,Custom Super Strong permanent N35 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N35,N45,N50,N40M,N48M Tolerance in size : +/-0.1 mm
Product name : Disc magnet,Custom Super Strong permanent N38 Neodymium Arc Magnets for PM motor Shape:Segment, Disc, Cylinder/Rod, Ring, Countersunk, Segment, Trapezoid, Irregular shapes are available, Customized shapes for Sintered NdFeB Magnet are also available) Direction of magnetisation : Through the thickness or through the diameter Type of coating : Nickel, Ni-Cu-Ni, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and so on. Grade : N38,N40M,45H,N42SH,N45SH,N35UH,N35EH Tolerance in size : +/-0.1 mm
