Technical characteristics of SkyLite polycarbonate awning: * Using materials are SkyLite polycarbonate panels with UV resistance, high light transmission, sound insulation, good heat insulation. * Negative link between the frame and the plate, minimizing the screw holes on the surface, avoiding the leak through the screw hole and high aesthetics. Simple to transport and install, save time in construction and installation. * Environmentally friendly, safe for users.
PMMA lumps and sheets Material : PMMA lumps and sheets Category : PMMA Type : Scrap White GRADE: SPECIFICATION : PMMA lumps and sheets , extrusion grade from window Very low % of sheets , majority are lumps . Lumps are loaded in bigbags , sheets we put on pallets , Origin : Israel - Haifa LOADING WEIGHT: 24 Ton FAS (USD/Ton) : 670$ Packaging : Jumbo Bag Est. Shipping Time : 15, 30, 45 days
Sawn timber wood,furniture,cardboard box,plastic,textile & garment, herbs& spices,coconut wood,rattan cane,rattan cane webbing,rattan panjang,rattan manao,semi poles,rattan kubu,rattan core,rattan batang skin,rattan batang polish,rattan batang,gaharu ambon,charcoal,aluminum foil, fabric,teak wood,meranti wood,merbau wood,albasia wood,iron wood,mahogany wood,sandalwood,sungkai wood,bangkirai wood ,camphor wood,sonokeling,rosewood,pine wood,palm wood,mango wood, rubber wood,spruce wood,finger join wood board,bamboo,coconut,getah damar,gum copal,universal glove, copra,yellow sweet yam,white yam,purple yam,cassava,beetroot, kalsi board,film faced plywood,plywood,face veneer, virgin coconut oil,betel nut,coconut oil,nutmeg and mace,mustard seed,ginger,fenugreek,coffee,clove,turmeric,chili,cassia bark, cardamom,black pepper,sugarcane,red onion,dll.
Bopp cpp plastic films, copper cathode, copper wire, copper ingots, copper concentrate, aluminum ingots , almunium scrap, almunium wire, steel bars, hms, etc.
We put forward a high quality of assortment of Nickel which is available in many forms including LME registered and non registered cathodes, cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder, flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods. Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity
We are engaged in making Lead available in several forms including LME registered and non registered 99.97% and 99.99% as well as secondary ingots, foil, granules, powder, rod, shot, sheet, and wire. Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes upon exposure to air. Alloys include pewter and solder.
We hold immense expertise in making available Copper in many forms including LME registered and non registered cathodes, billets, rods, cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire, insulated wire, mesh and “evaporation slugs”. Copper is one of the most important metals. Copper is reddish with a bright metallic lustre. It is malleable, ductile, and a good conductor of heat and electricity (second only to silver in electrical conductivity). Its alloys, brass and bronze, are very important. Monel and gun metals also contain copper. The most important compounds are the oxide and the sulphate, (blue vitriol
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Coir fibre bale, coir pith, coco peat, grow bags, coco chips, coir needle felt, coir geo textiles, rubberized coir(latex sprayed) sheets for mattress ,mulch mats and garden articles.
PC solid sheets offcuts transparent and colored About transparent 80% and colored, opal and translucent 20%
Origin: Japan Category: PVC Type: Regrind Grade: Clear Quantity: 24 Tons Loading weight: 24 Tons Price FOB: 830-1030 USD/ Ton Specification: PVC Sheet Reground Clear, Packing will be in fle-con bag & paper bag.
Specification: PVC Sheet Reground Clear, Packing : In Fle-Con Bag and Paper Bag. Color: Clear Loading Weight: 24 Tons Quantity: 24 Tons
MATERIAL : PP Sheet Regrind White Color CATEGORY :PP TYPE :Regrind GRADE :White SPECIFICATION :"Origin in Japan Packing : In Fle-Con Bag Shipment : Mid/End April" LOADING WEIGHT : 22 Tons FOB (USD/Ton) : $660-860
Solid polycarbonate plastic sheet size Width: 1220mm, 1560mm, 1820mm, 2100mm Length: Any length Thickness: 1.2mm Category: Roofing panels Weight: 1.2kg / mm / m2
Solid polycarbonate plastic sheet size Width: 1220mm, 1560mm, 1820mm, 2100mm Length: Any length Thickness: 2mm Category: Roofing panels Weight: 1.2kg / mm / m2
Solid polycarbonate plastic sheet size Width: 1220mm, 1560mm, 1820mm, 2100mm Length: Any length Thickness: 10mm Category: Roofing panels Weight: 1.2kg / mm / m2
Steel
We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.
