Color index, number : 18
Hot alcoholInsolubile,% : 1.00
Application:
1. The plasticity and castability of heating, combined with its ability to absorb a large amount of infiltrated material, is of great value in the casting industry.
2. The lac resin is non-toxic. Based on the excellent characteristics listed above, the shellac resin is applied to alcohol paints, electrical insulating materials, printing inks, rubber fillers, and its use for oil and acid resistance.
3. Other industries: It has a wide range of important application value in many fields such as medicine, food, cosmetics, chemical industry, metallurgy, machinery, woodware, papermaking, electronics and military industry.
Rose hips (lat. Hip rose, fruit) can be used in many different variations. First of all, rosehip is a powerful bactericidal, anti-inflammatory and phytoncidal agent. Thanks to the record content of vitamin C, it gives a boost of immunity and increases the body's resistance to viruses and infections.
The picking season is from September to November.
Workers pick the berries by hand as they ripen. Raw material is delivered to the company, where it is dried in a heated, temperature-controlled room. Then, berries are cleaned of peduncles and twigs, leaves, defects and unripe berries.
- Wild plants.
- Humidity (9% -10%).
- Maximum amount
- Purification method: color-sorting machine
- Packaging (weight 25 kg)
- Production capacity - from 100000 tons
Rosehips (lat. Rosa Canina) are especially rich in vitamin C, it gives a boost of immunity and increases the body's resistance to viruses and infections. It is a powerful bactericidal, anti-inflammatory and phytoncidal agent.
Season of picking is from September to November.
White-flowered and red-flowered species of wild rose, which we collect in the Odessa region of Ukraine, are one of the record holders for the content of vitamin C.
Rosehips are also contain carotenoids, beta-carotene, lutein, zeaxanthin, andlycopene.
Rosehip products help to strengthen immune system, improve skin, reduce arthritis pain.
Workers carefully hand pick berries fully ripen. Raw material product is taken to our facility where it gets cleaned with
water and dried in a temperature-controlled heating room. Then berries are cleaned of peduncles and twigs, leaves, defects and unripe berries.
Each batch get tested and receives a quality certificate.
* Wild plants
* Max drying temperature 50 degrees C
* Humidity (9% -10%).
* Purification method: color-sorting machine
* Packaging weight 25 kg OR on request
* Production capacity from 100000 tons per season
* High nutrient content from the south of Ukraine
The price may vary depending on the volume and season.
Ecologically clean Odessa region in Ukraine allows us to collect wild plants with a high content of nutrients.
At your request, we will provide a photo and any information about a particular batch.
Fito-Export, medicinal herbs supply partner for your business.
Melamine formaldehyde resin is a type of thermosetting plastic that is formed by the polymerization of melamine and formaldehyde. This resin is commonly used in various applications, including laminates, coatings, adhesives, and molded products. When you refer to "Concentrated Melamine Formaldehyde Resin," it suggests a formulation with a higher concentration of the resin, which may be used in specific industrial processes.
Composition: Melamine formaldehyde resin is typically produced by the reaction of melamine (a nitrogen-rich compound) and formaldehyde (a reactive aldehyde). The reaction results in a highly cross-linked polymer with excellent hardness, chemical resistance, and heat resistance.
Properties:
High Heat Resistance: Melamine formaldehyde resin exhibits high heat resistance, making it suitable for applications where exposure to elevated temperatures is a concern.
Hardness and Durability: The resin imparts hardness and durability to the materials it is used in, making it valuable for products like laminates and molded items.
Chemical Resistance: Melamine formaldehyde products are known for their resistance to chemicals and staining.
Applications: Laminates: Melamine formaldehyde resin is commonly used as a coating for laminates, which are widely used in furniture, countertops, and decorative surfaces.
Molded Products: It is used in the production of molded items, such as kitchenware, dinnerware, and electrical components.
Adhesives: The resin is used in the formulation of adhesives for bonding wood and other materials.
Concentration: The concentration of melamine formaldehyde resin can vary based on the specific formulation required for a given application. A concentrated form may be used to achieve specific performance characteristics or to facilitate easier handling and storage.
Manufacturers and Suppliers: Different manufacturers may produce concentrated melamine formaldehyde resins with varying specifications. It's essential to consult with the specific manufacturer or supplier for detailed information about the product's formulation, recommended uses, and handling guidelines.
Urea formaldehyde adhesive powder is a type of adhesive that is commonly used in the woodworking and furniture industries for bonding wood and wood-based materials. It is a powdered resin that is typically mixed with water to form a glue-like substance for bonding purposes. Here are some key points about urea formaldehyde adhesive powder:
Composition: Urea formaldehyde adhesive powder is composed of urea formaldehyde resin, which is synthesized by the reaction of urea and formaldehyde. This reaction produces a thermosetting resin that is commonly used as an adhesive.
Powder Form: The adhesive is manufactured in a powdered form for ease of handling and storage. The powder is then mixed with water to form a workable adhesive solution.
Application: Urea formaldehyde adhesive powder is widely used in the bonding of wood and wood-based products, such as particleboard, plywood, and medium-density fiberboard (MDF).
It is suitable for applications where a strong and durable bond is required.
Curing Process: Urea formaldehyde adhesives are thermosetting, meaning that they undergo a curing process when exposed to heat and pressure. This process results in a cross-linked structure, providing a strong and durable bond.
Features: Urea formaldehyde adhesives offer good bonding strength, water resistance, and heat resistance.
They are cost-effective and have been widely used in the woodworking industry for many years.
11552 Heat Resistant Rfid Student Lockers Suppliers
Short on time? Let Heat Resistant Rfid Student Lockers sellers contact you.
Galvanized GI Steel Rolls & Plates & Coils
Whatâ??s the difference between galvanized GI steel coils and plates?
I. Definition
Galvanized GI Steel coil and galvanized sheet are galvanized steel. The galvanized coil is a continuous hot dip galvanized coil in the production process. While galvanized sheet is a single hot dip galvanized sheet in the production process.
2. the production process
The production process of galvanized coil and galvanized sheet is different.
The production process of galvanized coil generally includes multiple processes such as coil heating, hot dip galvanizing and shearing into coil.
The galvanized sheet is generally the zinc alloy coating through the hot dip technology directly coated to the surface of the steel plate.
So the production process is relatively simple, the process difficulty is relatively low.
3. material thickness
The material thickness of galvanized coil and galvanized sheet is also slightly different.
Generally speaking, the thickness of galvanized coil is relatively thin. We mainly use it for the production of cold rolled, coating and other thin steel products.
The thickness of galvanized sheet is relatively thick. We mainly use it in the manufacture of glass fiber reinforced plastic, automotive panels, roof panels and other steel products requiring strength and corrosion resistance.
4. Advantages and Disadvantages
Both galvanized coil and galvanized sheet have their own advantages and disadvantages.
The production cycle of galvanized coil is short, the process is simple, and it is suitable for the production of low thickness and high precision steel products.
The galvanized sheet has the advantage of hardness, corrosion resistance, wear resistance and other multiple properties.
However, the production process of galvanized sheet is time-consuming and laborious, and the production cost is relatively high.
5. Application fields
The application areas of galvanized coil and galvanized sheet are also different.
Galvanized coil is usually used in the production of home appliances, building materials, auto parts, pipes and other high-demand steel products.
The galvanized sheet is mainly used in automobile manufacturing, construction engineering, petroleum, chemical and other industries.
In addition, because of the good corrosion resistance of galvanized sheet, it is also widely used in Marine engineering, railway, bridge and other fields.
We have pure white silica quartz having purity of more than SiO2 99%. Our product has 95% whiteness. We can provide different mesh sizes. The particle size will be in mesh or microns as our customer wants. We can also pack the product according to our buyer requirements. Silica quartz is also known as silicon dioxide, it is versatile and widely used material and has various appliactions in industries such as glass manufacturing, electronics, and construction. Its unique properties, including transparency, durability, and resistance to heat and chemicals, make it an essential component in many products.
430 Annealed Stainless Steel Strip
Extra Bright Annealed Soft Temper 430 Stainless Strip Steel is the most popular of all the straight chrome stainless steels Its principal use is for decorative purposes Because of its excellent heat and corrosion resistant properties its ductility and because it costs less than the chromenickel grades this Type 430 Stainless Steel Strip is used in countless applications These uses are primarily for stainless and decorative purposes including household appliances metal molding metal trim cabinet hardware hinges drawn and formed parts and stampings
Type 430 Ferritic Stainless Steel Strip Characterisings
Corrosion and heat resistant
Ductility at about 75 of low carbon strip
Similar to chromium grades with stretcher strains
Roping can result from excessive stretching
Able to weld for nonrigorous service
Magnetic in all conditions
Tensile strength annealed condition minimum of 65000 PSI yield of 30000 PSI elongation at 22
430 Stainless Steel Strip Specifications
Grade: 430
Standard: ASTM/EN/JIS
Thickness: 0.03mm-5.0 mm
Width: 8.5mm-600 mm
Length: coil type or it can be produced as customer requirements
Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc
Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge
430 Stainless Steel Strip Introductions
430 stainless steel strip is a general purpose stainless steel with good corrosion resistance.
It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance.
Due to addition of stabilizing element titanium, it has good mechanical properties of welding.
Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower.
430 Stainless Steel Strip Applications
430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware.
430 Stainless Steel Strip Chemical Composition
The chemical components of grade 430 stainless steel strip is summarized in the following table:
Grade Standard C Si Mn P S Cr Ni Mo
430 ASTM A240 0.12 0.75 1.00 0.040 0.030 16.00-18.00 0.75
Imagine a world without fireproof materials. A world where high-temperature processes for manufacturing essential products such as glass, steel, and cement couldnot exist. Without refractory clay, this would be our reality.
As a premier manufacturer of Refractory clay, Shree Ram Kaolin is renowned for producing top-notch materials with exceptional high-temperature resistance.
Our Cedar Heights facility is dedicated to crafting high-quality refractory clays that are widely acclaimed for their superior quality.
We ensure that it is a heat-resistant substance that can withstand extreme temperatures, chemicals, and physical stress.
Woven from real water hyacinth, this Water Hyacinth Placemat is an environmentally friendly placemat full of natural style. The hyacinth rope is wound into a spiral, creating a circular placemat which will create a sweet and soft look on your dining table, while also protecting your table from heat marks.
Mats are made from natural seagrass and contain no chemicals. They are odorless and heat, stain and oil-resistant so that they can protect your table under hot meals.
PE Granules
High density polyethylene (HDPE) for non-toxic, tasteless, no smelly white particles, melting point is about 130 �° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
Low DENSITY POLYETHYLENE (LDPE), commonly known as high-pressure POLYETHYLENE, is mainly used in plastic bags and agricultural film due to its LOW DENSITY and the softest material.
Linear Low Density Polyethylene (LLDPE) is a copolymer of ethylene and a small amount of advanced olefin in the presence of catalyst.LLDPE is similar to LDPE in appearance, with poor transparency and good surface gloss. LLDPE has the advantages of low temperature toughness, high modulus, bending resistance and stress cracking resistance, and good impact strength at low temperature.
We have a wide range of grade PE materials with different physical properties. If the table does not meet your requirements, please feel free to consult us we will try our best to meet all your requirements for plastic granules.
AS PS ABS PLA HDPE Granules
Acrylonitrile - styrene copolymer.
Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as
engineering plastics.Excellent heat resistance and solvent resistance.
Application.
1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases.
2. Special grade: blade of fan, batteries housing, lighters.
3. Refrigerator Sleeves, Miscellaneous
4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling
5. High Transparency, Heat Resistance, chemical resistance
PC + Glass Fiber reinforced (GF)
The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating
improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm.
Grade: (ML3410-30 / MH3515-30 / MN-3110-30)
1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF)
General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact.
Application: Watch parts, switches and nobs, OA equipment.
2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF)
Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage
and dimensional stabilities.
Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames.
3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF)
MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance,
surface aesthetics and weld line strengths.
Applications: Meter cases, electrical and electronic housings.
To-Go cups made from coffee grounds are made from 100% plant-based and recycled materials.
Ingredients: Coffee Bio-Composite
Dimensions: 90*53*123 mm (mouth diameter x bottom diameter x height)
Capacity: 300 ml
Weight: 145.6g
Featured:
- Good heat retention ability, heat resistant to 120 degrees Celsius
- Safe for health (does not contain BPA)
- Durable and lightweight, reusable many times
- Easy to clean after use
- Can be used in dishwashers and microwaves. Note: The product has been tested and is guaranteed to be safe for use in the microwave, however we do not encourage customers to use the cup multiple times in the microwave.
- Biodegradable
- Possesses characteristic coffee color and scent
- Logo can be printed on the cup surface
Preserve:
- Cool, dry, well-lit place to prevent mold
1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
Used for shining the Melamine dinnerware surface made by melamine moulding compound and urea moulding compound.
The article coated with Glazing Powder has a shinny & harder surface and resists better to cigarette burns, foodstuffs, abrasion and detergents.
Packaging: Paper bag with inner PE film bags. 10/25kg per bag
Storage: Kept in airy, dry and cool room.
Storage period: 12 months from the manufacturing date. Test should be undertaken when expires. Qualified products can still be used.
Transportation Caution: avoid moisture, heat, dirt and packaging damage.
Melamine resin powder LG220 Tech.Sheet
Packaging Details
Packed in 10/25kg paper bag with inner water proof PE film.
Storage: Kept in airy, dry and cool room.
Storage period: 12 months from the manufacturing date. Test should be undertaken when expires. Qualified products can still be used.
Transportation Caution: avoid moisture, heat, dirt and packaging damage.
Material: Natural wood (e.g., beechwood, bamboo, oak)
Length: 15-30 cm (varies by design)
Width of Spoon Head: 3-5 cm
Weight: 20-50 grams (depending on size and wood type)
Finish: Sanded smooth, may be untreated or coated with food-safe oil/wax
Color: Natural wood tones (light to dark depending on wood type)
Durability: Heat-resistant, non-reactive with food
Shape: Oval or round spoon head, with straight or slightly curved handle
Food-Safe: No harmful chemicals or coatings
Uses: Stirring, mixing, serving (suitable for cooking with non-stick cookware)
Care: Hand wash recommended; avoid dishwasher and prolonged soaking
Packaging: Usually sold in sets or individually, in eco-friendly packaging
Original: Viet Nam
Size: 1.22 x 2.44 meter- ply wood
Thickness: 1 ply 1 mm; 2 plys: 1.7-2 mm
Color: Natural color of bamboo
Uses:
Widely used in decoration, partitions, rooftop
Processing chart
Coir 1 layer of light yellow color
After being bleached, the mainspring sheet will be dipped in a specialized glue that will be pressed by a machine at high temperature to create a single-layer cork sheet. Itâ??s smooth surface.
The heat-pressing process of 80 - 120 degrees Celsius carbonizes natural materials, from which the mainspring is denatured, resistant to termites and extremely durable. Glue type is used to be enter from the water out of the standard EO and not have the quality harmful. This is also the type used to use a common variable for the products of wood, import export of the market Europe
HDPE 7000F is high density polyethylene film grade which well known for the high quality film applications. This grade is excellent for thin film processing with high mechanical strength, good stiffness and good heat sealability. It is suitable for producing general purpose packaging films in a wide range of size and thickness.
Products indicators
HDPE cable material
Property
Unit
Typical Value
Mass density
g/cm
0.941-0.959
Melt flow Rate(190 Centigrade /2.16kg)
g/10min
1.0
Tensile yield strength
MPa
19.0
Flexural modulus
Mpa
965
Elongation@ break
%
400
Impact Embrittlement temperature
Centigrade
MAX -118
Dielectric Constant
100KHZ
2.32
1MHZ
2.31
Loss Tangent
100KHZ
MAX 0.0001
1MHZ
MAX 0.0001
Volume resistivity
OHM-CM
MIN 1x10 15
11552 Heat Resistant Rfid Student Lockers Suppliers
Short on time? Let Heat Resistant Rfid Student Lockers sellers contact you.
