The scrap consists of R-50 (51,67 KG/m) R-65 (64,72KG/m)
Used Rails shall be considered free of alloys when the residual alloying elements do not exceed
Cut to 1.5 meter length (standard)
1. Technical terms: USED RAIL R50-R65
2. Specifications and Chemical
Composition:
Used Rail: R50 (51.67KG/Meter, GOST 7173-55),
Used Rail: R65 (64.72KG/Meter, GOST 8161-75).
Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller
Width: 5.5 inches ; Weight: 64.72Kg.
No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight.
No pitting.
Only atmospheric rust
No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.
* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.
When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.
PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.
* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.
* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.
* The cement mortar will be used before it starts setting.
Ethicon Prolene is a brand of surgical suture material, and the notation "2/0" refers to the size or diameter of the suture. The cutting needle indicates the type of needle attached to the suture. A cutting needle is designed with a sharp edge, allowing it to cut through tissues, and it is often used for skin closure and in procedures where a clean, precise incision is needed.
So, "Ethicon Prolene 2/0 cutting needle" signifies a Prolene suture with a size of 2/0 and a cutting needle.
Here's a breakdown:
Ethicon Prolene: Ethicon is a subsidiary of Johnson & Johnson and is known for producing a variety of surgical products, including sutures. Prolene is a type of suture material made of polypropylene.
2/0 (pronounced "two-oh"): This indicates the size or diameter of the suture. In this case, 2/0 is a medium-sized suture commonly used for various surgical procedures.
Cutting Needle: A cutting needle is designed for sharp and precise penetration through tissues. It's commonly used in procedures where a clean incision is required, such as in skin closure.
R50- R65 - IRSI CODES;
The chemical composition is the standard for R-50 R-65 Tee rails original weigh 50 pounds per yard or heavier,6 meters long and over. Material to be suitable for rerolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails, rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from end of the piece of rail. Free from Fluff, Nonferrous inclusions, excessive rust and other impurities. Free from war and explosives, shells, cartridges, other arms and ammunitions used or otherwise and any closed containers. Free from any radioactive materials, any harmful chemicals, substances, and coatings any organic waste any other harmful substances. Dirt, dust, rust fluff and other impurities not allowed over 05 %. The rails are to be neatly bundled and secured with iron wire or straps, provided with adequate lifting hooks. Individual bundles not to exceed 5 MTW. Used Rails R50 - R65
Chemical Composition Used Rails;
C: 0, 54 - 0,82
Si: 0,18-0,40
Mn: 0, 60-1, 05
S: 0.04 max
P: 0,035 max
As.: 0, 01 max of Mass share
Norms: R-50 GOST7173-75 and R-65 GOST-8165-75
The scrap consists of R-50 (51, 67 kg/m) R-65 (64,72 kg/m)
Used Rail ISRI 27-29 ISRI-CODES;
(27) Rail, Steel No. 1. Standard section tee rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch, and guard rails, or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail.
(28A) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 18 inches long and under.
(28B) Rail, Steel No. 2 Cropped Rail Ends. Standard section, original weight of 50 pounds per yard and over, 2 feet long and under.
(28C) Rail, Steel No. 2 Cropped Rail En ds. Standard sec t ion, original weight 50 pounds per yard and over, 3 feet long and under.
(29) Rail, St eel No. 3.Standard section tee, girder, and/or guard rails, to be free from frog and switch rails not cut apart, and contain no manganese, cast, welds, or attachments of any kind except angle bars. Free from concrete, dirty and foreign material of any kind.
The rails can be cut to the length the buyer wants
Enfamil Enspire Infant Formula is a premium and meticulously designed option for newborns and infants. Developed by Enfamil, a globally trusted leader in infant nutrition, this formula provides a comprehensive blend of essential nutrients crucial for a baby's healthy growth and development. Enriched with key components found in breast milk, including Lactoferrin and MFGM (Milk Fat Globule Membrane), it supports cognitive, immune, and digestive functions. The formula's composition closely mimics the benefits of breast milk, making it an excellent choice for mothers who may not be able to breastfeed exclusively. With Enfamil's commitment to high standards and cutting-edge research, Enfamil Enspire Infant Formula stands as a premium option for those seeking the very best for their little ones.
6904 Handle Attach Border Measure Cut Close Suppliers
Short on time? Let Handle Attach Border Measure Cut Close sellers contact you.
Classic Design Home Professional Indoor Outdoor Portable RGB tws mini Speaker Box with Microphone
1. It is a Portable Outdoor Mini Bluetooth Speaker. It is small, light, waterproof but with powerfull bass. It is a backpack
speaker, a bicycle speaker. And the most amazing thing is it is a magnetic speaker.
2. Magnetic Bluetooth Speaker: The base of this Portable outdoor mini speaker comes with 4 super strong magnets. It can be attached to the iron-coataining object, and can be placed at will, play with idea and creat your interesting life.
3. Portable Small Bluetooth Speaker: Light and compact. Small and convenient to carry.
4. Bicycle Speaker: The speaker comes with a silicone carrying handle, you can easily hang it on the handlebars of the bike.
5. Small But Powerful Speaker: It come with 6W powerfull loadspeaker unit. The special passive radiator edge around the speaker unit create powerful bass.
6. 360 full-range sound effects, satisfy your picky ears: Professional-grade branded loudspeaker with clear and dynamic sound,superb overall balance, full bass and loud treble.
7. IPX4 Waterproof: Carry it to anywhere anytime you want. You don't need to worry about raining or splashing
* International standard
* A4: 210 x 297mm
* A3: 420 x 297mm
* 8.5 x 11-inch (216 x 279mm)
* 8.5 x 14-inch (216 x 330mm)
Key Performance
- No jam in photocopy machine
- No double feed
- Stay flat after copying
- Leave no dust in the copy-machine
- Nice appearance-white and clean
- Nice touch-smooth and bulky
- No see through-print both sides
- Been developed for : Photocopy Macchines, Laser Printers, Ink-jet Printers, Fax Machines
Features & Benefits
- Perfect for high-quality printing and copying
- Super high whiteness produces outstanding clarity and contrast for all graphics and text
- Precision-cut edges for trouble-free performance
- User-friendly box design with built-in handle for easy carrying, tear slot perforation for easy access to the reams and label for filing
Potassium Sulphate is a high-grade potassium fertilizer containing high Sulphur, high Potassium, and low Chlorine. It is mainly used for grapes, citrus, flowers, tobacco and anaerobic crops. It is also used for cutting and cultivating delicate crops (such as greenhouse cultivation, hydroponic crops, etc.) considered as a premium fertilizer.
Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation.
Item Specification
Appearance : White Powder
K2O %: Min 50.0
Chloride (as Cl) %: Max 1.0
Moisture %: Max 0.5
Sulphur: Min 18.0
pH Value (1% Solution): 2-3
Insoluble Matter: Max 0.3
Sodium: Max 0.4
Na as NaCL: Max 1.1
Potassium Sulphate granular is a high-grade potassium fertilizer containing high Sulphur, high Potassium, and low Chlorine. It is mainly used for grapes, citrus, flowers, tobacco and anaerobic crops. It is also used for cutting and cultivating delicate crops (such as greenhouse cultivation, hydroponic crops, etc.) considered as a premium fertilizer.
Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation.
Item Specification
Appearance: White Granular
K2O %: Min 50.0
Chloride (as Cl) %: Max 1.5
Moisture %: Max 0.5
Sulphur: Min 17.5
Sodium: Max 0.4
Na as NaCL: Max 1.1
Size 90%: 2-4.75mm
Potassium Sulphate is a high-grade potassium fertilizer containing high Sulphur, high Potassium, and low Chlorine. It is mainly used for grapes, citrus, flowers, tobacco and anaerobic crops. It is also used for cutting and cultivating delicate crops (such as greenhouse cultivation, hydroponic crops, etc.) considered as a premium fertilizer.
Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation.
Item Specification
Appearance : White Powder
K2O %: Min 50.0
Chloride (as Cl) %: Max 1.0
Moisture %: Max 0.5
Sulphur: Min 18.0
pH Value (1% Solution): 2-3
Insoluble Matter: Max 0.3
Sodium: Max 0.4
Na as NaCL: Max 1.1
GerardJOSEPH llc is an American company specializing in international supply of Consumers goods. We are a family business that is delivering the highest quality of consumer goods to buyers all over the world. We own shares of companies through the USA that do the production for us. High quality of products are guaranteed thanks to careful, detailed and research. Thanks to the policy followed by the company, we are conceived in the market as a reliable, honest and business like partner, the one that guarantees the highest standard of products.
ISRI-CODES:
(27) Rail, steel No.1 â?? Standard section T rails, original weight 50 pounds per yard or heavier, 10 feet long and over. Suitable for re-rolling into bars and shapes. Free from bent and twisted rails, frog, switch and guard rails or rails with split heads and broken flanges. Continuous welded rail may be included provided no weld is over 9 inches from the end of the piece of rail.
(28a) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 18 inches long and under.
(28b) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 2 feet long and under.
(28c) Rail, steel No.2 â?? Cropped Rail Ends, standard section, original weight of 50 pounds per yard and over, 3 feet long and under.
(29) Rail, steel No.3 â?? Standard section T, girder and/or guard rails, to be free from frog and switch rails not cut apart and contain no manganese, casts, welds or attachments of any kind except angle bars. Free from concrete, dirt and foreign material of any kind.
We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.
ELTEE DMCC is known for its Top Quality Potassium Sulphate (water soluble) NPK - 00:00:50. We supply our products to 17 reputed countries of World and our product is well accepted by our valuable buyers.
About Product :
Potassium Sulphate is a high-grade potassium fertilizer containing high Sulphur, high Potassium, and low Chlorine. It is mainly used for grapes, citrus, flowers, tobacco and anaerobic crops. It is also used for cutting and cultivating delicate crops (such as greenhouse cultivation, hydroponic crops, etc.) considered as a premium fertilizer.
Handling and Storage: Store in a cool and dry place, away from moisture, heat. Protect the materials from the sun or rain during transportation.
Item Specification
Appearance : White Powder
K2O %: Min 50.0
Chloride (as Cl) %: Max 1.0
Moisture %: Max 0.5
Sulphur: Min 18.0
pH Value (1% Solution): 2-3
Insoluble Matter: Max 0.3
Sodium: Max 0.4
Na as NaCL: Max 1.1
Appearance : White free flow powder.
Urea, a nitrogen-rich compound with the chemical formula CO(NH), plays a significant role in the oil and gas industry, Urea, also known as carbamide, is a highly soluble organic compound. It is synthesized on a large scale from ammonia and carbon dioxide and is primarily used in fertilizers, which accounts for about 90% of its global production.
Chemical Properties
Molecular Formula: CO(NH)
Molar Mass: 60.06 g/mol
Appearance: White, crystalline solid
Melting Point: 133C (271F)
Solubility: Highly soluble in water, forming a neutral solution
Industrial Production
The production of urea typically involves the following steps:
Ammonia Production: Sourced primarily from natural gas (methane) through the Haber-Bosch process.
Reaction with Carbon Dioxide: Ammonia reacts with carbon dioxide to produce ammonium carbamate, which is then dehydrated to form urea and water:2 3 2+ 2NH 3 +CO 2 NH 2 CONH 2 +H 2 O
Diesel Exhaust Fluid (DEF): Urea is used to reduce nitrogen oxide (NOx) emissions from diesel engines. DEF, a mixture of 32.5% urea and 67.5% deionized water, is injected into the exhaust stream of diesel engines.
Oil Drilling Fluids: Urea can be used in drilling mud formulations to enhance the efficiency of the drilling process.
Chemical Manufacturing: Urea serves as a feedstock in the production of various chemicals such as melamine and urea-formaldehyde resins.
Desulfurization: It is used in processes to remove sulfur compounds from petroleum products.
Market Dynamics
Demand: The demand for urea is largely driven by its use in agriculture. However, industrial uses, including those related to the oil and gas sector, contribute significantly to its market.
Pricing: Urea prices are influenced by the cost of natural gas, the primary raw material, and global agricultural demand cycles and NEGOTIABLE
Environmental Impact: While urea itself is not hazardous, its overuse in agriculture can lead to environmental issues such as eutrophication.
Handling and Storage: Urea should be stored in a cool, dry place away from moisture, as it is highly hygroscopic. It is considered non-toxic, but proper safety measures should be followed to avoid dust inhalation or skin contact.
Logistics: Efficient transportation and storage solutions are vital to maintain urea quality and manage costs.
Regulations: Compliance with international and local regulations regarding chemical handling, safety, and environmental impact is crucial.
Market Opportunities: Identifying and targeting markets with growing industrial and agricultural demand for urea can enhance profitability.
Origin: Russia/ Kazakhstan.
Contact us for more information
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance.
Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound.
Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives.
Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery.
Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance.
Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound.
Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives.
Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery.
Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Chariot Lightweight Baby Stroller for Travel
A babyâ??s Lightweight Stroller Pram for Baby is a useful piece of equipment. These Stroller Prams are made to make the lives of parents on the go easier by being small, lightweight, and easily collapsible. They are compact for storage in small flats or car boxes thanks to their travel-friendly folding prams.
The best compact foldable stroller & pram will accommodate your needs whether you want to keep an eye on the infant or let them explore the environment. The bassinet has a two-way reclining feature that gives the babyâ??s comfort and naptime requirements flexibility.
Because safety is so important, this pram has safe restraints and a strong structure that complies with strict safety regulations. The baby is also kept comfortable when moving around thanks to the adjustable backrest. Whether they prefer to sit up and explore or lie back for a calm snooze.
Why StarAndDaisy Lightweight Stroller Pram for Baby
For stylish parents, StarAndDaisy portable luxury baby strollers redefine style and practicality. We meticulously craft our prams, creating an unparalleled fusion of design and comfort. The movable handle encourages interaction or exploration, and the high-view design keeps the infant occupied and in view.
Excellent maneuverability guarantees a comfortable ride on varied terrains, while safety measures offer peace of mind. With luxurious seating and flexible reclining choices, we put the comfort of the infant first. Strollers are great, but StarAndDaisy prams are more than thatâ??theyâ??re statements of ease, strength, and luxury. For a magical parenting experience that demonstrates a dedication to quality, choose us.
Key Benefits of Lightweight Stroller
Two-Way Reclining: The Chariot pram features two-way reclining, giving the baby comfort and versatility. It guarantees a comfortable trip, whether youâ??re exploring or snoozing.
High-View Pram: High-view strollers give babies an elevated view and enable parents to keep an eye on them at all times.
The Toddler pram prioritizes a babyâ??s comfort by offering soft, well-padded seats and adjustable recline choices, ensuring a safe and comfortable journey.
Memorable Moments: With the Best Baby Stroller Prams, outings become memory-making moments in style and comfort.
Convenience is at the forefront of Chariot pramsâ?? design, incorporating features like easy folding, ample storage, and parent-friendly, easy-to-go designs.
Smooth Maneuverability: Our prams offer superb maneuverability, effortlessly gliding on diverse terrains, ensuring the baby enjoys a smooth, comfy ride from city streets to park trails.
Chariot Lightweight Baby Stroller for Travel
A babyâ??s Lightweight Stroller Pram for Baby is a useful piece of equipment. These Stroller Prams are made to make the lives of parents on the go easier by being small, lightweight, and easily collapsible. They are compact for storage in small flats or car boxes thanks to their travel-friendly folding prams.
The best compact foldable stroller & pram will accommodate your needs whether you want to keep an eye on the infant or let them explore the environment. The bassinet has a two-way reclining feature that gives the babyâ??s comfort and naptime requirements flexibility.
Because safety is so important, this pram has safe restraints and a strong structure that complies with strict safety regulations. The baby is also kept comfortable when moving around thanks to the adjustable backrest. Whether they prefer to sit up and explore or lie back for a calm snooze.
Why StarAndDaisy Lightweight Stroller Pram for Baby
For stylish parents, StarAndDaisy portable luxury baby strollers redefine style and practicality. We meticulously craft our prams, creating an unparalleled fusion of design and comfort. The movable handle encourages interaction or exploration, and the high-view design keeps the infant occupied and in view.
Excellent maneuverability guarantees a comfortable ride on varied terrains, while safety measures offer peace of mind. With luxurious seating and flexible reclining choices, we put the comfort of the infant first. Strollers are great, but StarAndDaisy prams are more than thatâ??theyâ??re statements of ease, strength, and luxury. For a magical parenting experience that demonstrates a dedication to quality, choose us.
Key Benefits of Lightweight Stroller
Two-Way Reclining: The Chariot pram features two-way reclining, giving the baby comfort and versatility. It guarantees a comfortable trip, whether youâ??re exploring or snoozing.
High-View Pram: High-view strollers give babies an elevated view and enable parents to keep an eye on them at all times.
The Toddler pram prioritizes a babyâ??s comfort by offering soft, well-padded seats and adjustable recline choices, ensuring a safe and comfortable journey.
Memorable Moments: With the Best Baby Stroller Prams, outings become memory-making moments in style and comfort.
Convenience is at the forefront of Chariot pramsâ?? design, incorporating features like easy folding, ample storage, and parent-friendly, easy-to-go designs.
Smooth Maneuverability: Our prams offer superb maneuverability, effortlessly gliding on diverse terrains, ensuring the baby enjoys a smooth, comfy ride from city streets to park trails.
RHM-1000 twisted rope handle making machine is a high-speed paper handle making machine. Itâ??s fully automatic and operator friendly machine, wherein, twisted rope & paper are pasted together to form a handle. 2 rolls of paper and a bundle of twisted rope are fed into the paper handle making machine. Rope is pasted between 2 paper rolls and then cut at suitable length. Gluing and cutting are done within the machine and final twisted rope paper handles are delivered at the conveyor Long conveyors are provided as an option.
WEB OFFSET NEWSLIGHT 45000 2:2:2 FOLDER
MAXIMUM PRINTING SPEED 45, 000 cph
CUT OFF LENGTH 533 mm
546 mm 21,
21 1/2â??,
WEB WIDTH Minimum
600 (23.6 inches Maximum
915 mm (36 inches)
JAW CYLINDER RATIO 2- Around cutting
cylinder 2-Around pln/tucking
cylinder 2-Arround jaw
cylinder
TYPE OF FOLDS Half fold
(Broadsheet) Quarter Fold Double Parallel
Fold
FEATURES
Cylinder ratio 2:2:2.
Air cushioned 70o former.
Variable gain RTF.
2 sets of nipping rollers
Web severer
Motorized compensators
ADJUSTMENT FACILITIES
Lap adjustment.
Chopper phasing of 1/4 fold.
Diameter increment
2 sets of nipping rollers
WIDE RANGE OF OPTIONAL ATTACHMENTS LIKE
Quarter fold
Double parallel fold
Variable gain RTF
Cross perfora with on -run phasing
Geared derive slitter
Draw roller modules mechanically connected or sha less
Outfeed assembly
8 Webs provision
Shaftless drive option
Roll Feeding Square Bottom
Paper Bag Making Machine
Square bottom paper bag making machine has got lot of applications.
It can be used to produce shopping bags, grocery bags, food bags,
paper bags with handles and stylish bags used for gifts.This special machine produces the paper bag in one process from printed
or unprinted roll paper, side gluing, roll folding cutting, bottom folding,
bottom gluing forming, bag formation in one go. Machine is controlled
by PC programmable servo motor through the human-machine touch
screen interface variety of specifications paper bags. It has
various advantages such as high production, quick changeover,
operator friendly and fully automatic.
6904 Handle Attach Border Measure Cut Close Suppliers
Short on time? Let Handle Attach Border Measure Cut Close sellers contact you.
