Main use: Gx-p series flat glass tempering furnace are mainly used to produce flat tempered glass for architectural purpose, interior decoration, furniture appliances, instrumentation, lamp, etc. Main technical features: Glass sheet size: max size 3500*12000(mm), min size 60*60mm Perfect processing quality: comply with gb9963, gb9656, ecer43, ansiz97.1 standards; Broad glass processing applicability: float glass, coated glass, roddle patterned glass; Advanced heating methods: radiation/convection matrix heating optional with intelligent heating control system; Lower energy consumption: continuous production and tempering, energy saving; Easy operation: user-friendly inteface, self diagnosis, achieving auto-control in whole process Convenient datea storage: mass storage device, applicalbe for industrallized production and management.
Main use: Mianly used to produce the tempering glass for facades of building, curtain walls, household furniture, etc. Main technological features: 1, the furnace has two chambers, one for preheating and the other for heating.Due to this, the heating efficiency is higher and the productivity is 1.4-1.8 times than that of the single-chambered furnace. 2, an independent heating source is separately fixed onto the preheating chamber and the tempering furnace. Glass enters teh preheating chamber and then the tempering furnace to get heated. 3, glass will get preheated during the preheating section, which could ensure the glass be heated more evenly and increase the finished product rate.
Main use: Gx-sq series hyperboloidal glass tempering furnace is the new product of gangxin corporation, it's mainly used to produce the tempered glass for sidelites, back window of high-grade automobiles, and the home appliances, facedes of building, etc. Main technological features: 1, forming under high temperature more precisely with spherical surface more smooth and perfect. 2, with low-cost mould-made process, it's fast and convenient to make the replacement. 3, it achieves the completely automatic control in whole production, has slef-diagnosis capacity and comfortable human-machine interface, offers the production software based on 2 working stations or 3 working stations.
Max.Glass: 3000*2000m Min. Processed glass: 500*500mm Glass thinkness: 5-30mm No. Of axis: 5 axis Intalled power: 33kw Spindle power: 7.5kw Speed of spindle: 0-12000 r.P.M Tool changer: 6*2 Machine dimension:9000*2400*3730mm Weight: 5000kg
Used for injection vials
9" industrial adjustable angle glass thermometer The length of the casing is 9fsor 7fs; lens front , common or red-reading mercury filled prismatic tube; white v-shaped aluminum scale board highly improve the visibility; the stems can be rotated 360fp, allowing user to select their desirable viewing position. A braided rope can protect the tube from breaking, and enhance the resistance of sensitive bulb. 50 pcs at least
Glassware We are one of the leading exporter of a wide variety of glassware with good reputations. Our factories have more than 1800 workers and 20 years of glassware manufacturing experiance, producions follow the iso 9001 quality standardization. Product lines include all series of jars, glass, cups, flask etc. Custom decal printing service is available. Please visit our website: arkcreation.Com and do not hesitate to contact us for detail information.
. Powerfull and secure · strong lifting pin · lower overall height · straight lift · large grip range · includes swivel shackle The compact design of the ausavina lifter will help solve the problem where head room is an issue. For your convenience, ausavina’s multi lifter comes in two different sizes and is available with either black or white high quality natural rubbers. This particular lifter is made up of special aluminium imported from australia .
Kitchen processing table Ausavina kitchen processing table is designed to make your work more efficient. The table top tilts from being flat to various degrees for you to work more comfortably. It can handle slabs with thicknesses up to 1 1/2" easily.
250ml Double Wall Glass
Glass equipments, PTFE parts.Errection of glass equipments & dismantaling
To print images on the glass products of bottles,vodka bottles,beer bottles,wine bottles,perfume bottle,cosmetic packaging bottles etc with multicolor, we Hanhuang developed the Auto Glass Bottle Printing Equipment. The product photo as below, The Auto Glass Bottle Printing Equipment also can print photos for the flat surface of Wood, Stone, Metal, Plastic, Leather, Ceramic, Acrylic etc,if the surface not so flat, we will make a clamp as below showed to fix it, which can be applied with Bottle Printing too. Auto Glass Bottle Printing Equipment specification as below : Print head: Epson DX10/2PCS Printing method: 1,White;2,Multicolor;3,Varnish Printing software: Ultraprint and PhotoPrint Max printing size: 60cm*90cm Printing model: CMYKLCLM+6W/CMYKLCLM+4W+2V Printing height: 0-45CM Printing precision: 360dpi*720dpi*1440dpi Printing Speed: A3 image/180seconds Ink type: UV environmentally ink Ink consumption: 15ml/m2 Ink system: 50ml*6 colors Operation system: winxp/win7/win8/win10 Voltage: 110-220V 50-60HZ Printing interface: USB2.0 Solidification: LED UV Lamp Net/Gross weight: 260kg/450kg Outsize: 2020*1200*1030(mm) Packaging size: 2120*1350*1230(mm) Warranty: 3years(Not included Printing head)
Glazing glass is a combination of two or more pieces of glass spaced apart with a spacer bar and hermetically sealed with a primary and secondary sealant to form a single unit with one or more air spaces between each other. Max size :3300*12000mm Main character : Energy saving , improving the thermal performance Sound insulated Security and comfort Component : 1.� Glass items:� consists of hard or soft low E glass ,reflective glass ,clear glass ,tinted glass, with types of flat tempered ,bent ,laminated processing ,according to the application 2.� Spacer bar :is the material used to separate the two glass lites in an IGU. It can be made by aluminum,stainless steel,hybrid ,plastic material . The spacer width usually from 6mm-18mm.
It is processed by controlled thermal or chemical treatments to increase its strength compared with normal glass, about four times stronger than annealed, glass. When broken, tempered glass fractures into small, relatively harmless pieces, it is widen used for window, door, railing, furniture, vehicle.
JHG pattern glass is widely used in cabinets, windows and doors. and also we also can offer you finished products with cut, polished, tempered, laminated, acid etched. JHG pattern glass� is a kind of decorative translucent glass with embossed patterns on one or both surfaces. Pattern glass is generally used where privacy or obscurity is desired but light transmission is still important. With the special property of decoration, patterned glass can allow light to pass through, at the same time, it can also prevent clear view. Usually it transmits only slightly less light than clear glass.JHG pattern glass is widely used in cabinets, windows and doors .and also we also can offer you finished products with cut� ,� polished, tempered , laminated, acid etched . Max size :2000X3660MM Thickness :3-10mm Colour : clear/ bronze/blue/green/ grey
JHG is professionally offering all various of high quality laminated glass: 1) PVB laminated glass Colour includes clear/milk/bronze/grey/blue/green/black PVB film thickness is 0.38/0.76/1.14mm or thicker Both standard size and customized sizes available 2)Sentryglass Plus(SGP)laminated glass SGP bring more safe,more transparent for construction ,the film includes 0.89/1.52/2.28mm and thicker mainly used for glass floor,glass step,glass fin,curtain wall Max size is 18000mm length 3)EVA laminated glass It can be laminated with large range of inserts including PET film,polycarbonates,wood veneer,metal,paper ,stones,screeen mesh ,and so on ,it will bring mulrirusinous choice for inner decoration.
JHG tinted glass is produced by metal oxides to the float glass. The colour may be transferred in the series of blue, green, grey, bronze flexibly. The performance of visible light, privacy and solar heat transmission will be changed arrording the colour change. Different tinted glass offers varied application possibility-from interior partitions, to home appliance, to furniture, to facades and auto field. Reflective glass is float glass with a metallic coating that cuts off solar heat.The coating film may provide mirror effect, preventing visibility from outside and preserving privacy. JHG mainly offer 2 kinds of reflective glass. Hard reflective glass (on line) includes blue, green, grey, bronze, pink, silver colour, Soft reflective glass (off line) includes golden, silver, purple colur. Specification Sizes:1220*1830/1830*2440/1650*2140/2140*3300/2140*3660/2440*3660/2250*3660/3300*4500/5100/6000mm Thickness: 3-12mm Quality standard GB11614-2009/SGCC/EN 572
JHG may produce digital printed glass with Dip-Tech printer, ceramic inks. Our solution enable long-lasting durability, specialized functioinality, and outsanding design capabilities for wide range of printed glass.
Hard low E is produced by spraying a chemical material with Tin componds on the melting glass surface to form single layer of compound film with certain low emissivity function. Applicationï¼? Architecture:� curtain wall, facade, windows and doors Home appliance: micro oven, refrigerator Advantage: Improved energy efficiency Less UV Reduced condensation Specification: Glass Thickness: 3.2mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm Max size:� 3300*8000mm Normal size:� 2134x3300mm, 2440x3300mm, Quality Standard: In accordance with CE, GB, AS/NIS 2208-1996
Safety Glass testing Equipment: Portable on-site Comprehensive Measurement Instrument for Energy-saving Glass It is applicable to the field test for opt thermal parameters of energy-saving glass installed and or to be installed The data that the instrument can measure is: thermal parameters, optical parameters, light transmittance, light reflectance, shading coefficient, U value, LSG, Low-E position, E value, space thickness, overall thickness, glass thickness The types of glass that the instrument can measure are: Single pane, Laminated glass, Uncoated insulated glass, Coating on both sides and below, Coating on more than two sides, Coating on both sides and below, Coating on more than two sides, Vacuum glazing Pummel Test Device: Hammer head diameter: 30mm Impact Distance: Adjustable Shot Bag Impact Testing Frame: Shot Bag 45kg/46kg Automatic Release Electric Lifting Pneumatic Clamping PV Load Test Equipment Size: 6425mm*2000mm*3490mm Samples: 1643mm*991mm~2009mm*1027mm (Customized) Source: Sandbag Load: 2400Pa 5400Pa 8100Pa 10000Pa (Customized) Pneumatic Tyres Device Weight 50 kg ± 0.1 kg Tire pressure: 0.35Mpa ± 0.02Mpa Type: 3.50-R8 4PR Forced Entry Resistant Glass Test Device Axe: 810mm Long Axe Quality: 1.80kg Sample size: 610mm*610mm Insulating Glass Dew Point Meter Operating temperature: -80C ~ 100C Tube height: 300mm Tube diameter: 50mm Temperature resolution: 0.1 C Hard/Soft Pendulum Shock Test for Lifts Hard pendulum shock device Height: 330�± 15mm Max diameter: 240�±10mm Weight: 10kg �± 0.1kg Material: according to ISO standard Filler: 3.5mm 0.25mm Soft pendulum shock device Height: 330mm ± 15mm Maximum diameter: 240mm�±15mm Weight: 45kg ± 0.5kg Material: leather bag Filler: diameter 3.5mm ± 1mm lead sand Boiling Test Device Power: 220V 50Hz 3Kw (Customized) Outside Size: 400mm*255mm*480mm Inside Size: 400mm*255mm*480mm At most 6 samples with 300mm*300mm Tempered Glass Flatness Measuring Instrument Measurement of arcuate form and wave form of toughened glass Resolution: 0.01mm Measuring Span: 300mm-12000 mm ( Customized) Impactor for building Glass and Metal Guardrail Impact Steel ball Weight: 1040g �± 10g Dia: 63mm Shot bag impactor Data: Weight: 45kg �± 0.1kg Height: 330mm �± 13mm Max diameter: 250mm Material: leather bag filling lead shot Leather thickness: 0.15mm Lead sand size: 2.5mm Hard and Soft Body Impactors for Opaque Wall Components Soft body: Weight: 50kg Dia: 400mm Conical canvas bag filles with 3mm glass sphere Hard Body: Steel Ball 0.5 kg/50mm Steel Ball 1 kg/62.5mm
