Two-component silicone sealant information. Colour:A-white/B-black. Net capacity:A-190L/B-19L. Features: 1.Two-component,adjustable curing speed,fast curing in the deep,suitable for construction in the factory; 2.Neutral curing,non-corrosive to building materials such as metal and coated glass; 3.High modulus,high strengh; 4.Excellent resistance to high and low temperature.It will not become brittle,hardwn or crack at 50 after curing .It will not soften and degrade at +50,and always maintain good strengh and elasticity. 5.Good compatibility with other neutral silicone adhesives.
General purpose silicone sealant is a one part, fast curing and permanently flexible silicone sealant. With excellent waterproof performance, it is also a type of anti-fungal sealant able to use in bathroom and kitchens. Excellent tensile strength and compression restoring ability. Strong adhesion to glass, pvc, ceramic, concrete, wood, metal, tiles, vinyl and most building material. Typical applications: 1 al-alloy door & window , general decoration caulking seal. 2 all kinds of glass curtain wall , aluminum-plastic plate curtain wall. 3 gusset plate doors and windows 4 laminated glass, hollow glass, mirror glass , coated glass.
Features: 1.One component,neutral curing,non-corrosive to metal, coated glass, marble etc. 2.Prime-less adhesion to most building materials. 3.Remains flexible over a temperature range of 4.Excellent weatherability and high resistance to ultraviolet radiation, heat and humidity, ozone and temperature extremes. 5.Good compatibility with other neutral silicone sealants. 6.The material is supplied as a paste, which cures into extremely tough elastomeric silicone rubber ensuring a durable, flexible, watertight bond upon exposure to atmospheric moisture. Main applications: 1.Sealing in joints. 2.Glazing for door and window. 3.Various interior decoration glass, aluminum, ceramic, tile, wood and metal, etc. 4.Many other uses. Limitations: 1.Can not be used in structural glazing applications. 2.Is not appropriate for all will be leaking oil, plasticizer or solvent surface. 3.Is not suitable for airtight place, because the silicone sealant need absorb air gas in the water cure. 4.Not for frost or wet surface. 5.Is not suitable for the place of continuous immersion or year-round moisture. 6.Surface temperature is not below 0¡æ or above 50 ¡æ. 7.Can not contact with strong acids or bases. 8.Cannot be used on joint which bearing structural strength or places of physical damage. 9.Has performed adhesion and compatibility tests on project substrates and all accompanying accessories. Typical properties: These values are not intended for use in preparing specifications. MethodTest ItemUnitStandard Result GB/T 13477Density g/cm3Specified value 0.1 1.3 GB/T 13477 (ISO 7390) Slump(vertical) mm ¡Ü3 0 GB/T 13477 (ISO 8394) Extrusion rate ml/min 80 380 GB/T 13477(ASTM D 2377) Tack free time h0.9 GB/T 13477 (ISO 7389) Extension recovery8088 GB/T 1347(ASTM C 794) Peel strengthN/mm1.0 1.5 GB: Chinese National Standard ASTM: American Society for Testing and Materials ISO: International Standardization Organization The GB¡± testing method is equivalent or partly equivalent to that in the Installation: 1.Surface preparation: Sealants may not adhere or maintain long-term adhesion to substrates if the surface is not prepared and cleaned properly before sealant application.Using proper materials and cleaning procedures is vital for sealant adhesion. 2.Cleaning materials:clean, fresh solvent; clean, white cloths free of lint or other lint-free wiping materials; primer (when required). 3.Cleaning procedures:Remove all loose material (such as dirt and dust), plus any oil, frost or other contaminants from the substrates to which the sealant will be adhered. Do not use detergent to clean the substrate as residue may be left on the surface. Wet one rag with solvent and wipe the surface with it, then use the second rag to wipe the wet solvent from the surface before it evaporates. Change the cleaning rags frequently, as they become soiled. If cleaned areas are again exposed to rain or contaminants, the surface must be cleaned again. 4.Primers: GP111 general purpose silicone sealant will bond to many clean surfaces without the aid of a primer. For difficult-to-bond substrates, the use of a primer or special surface preparation should be evaluated. Emergent Treatment: Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately. Shelf Life: 9 months from the manufacture date stored in cool & dry place below 27 ¡æ. Color: Clear, black, white, gray, other colours as clients¡¯ requirement. Packing: Disposable cartridges£ºnet 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box. Sausages£ºnet 590ml, 500ml; 20 pcs / box. LIMITED WARRANTY INFORMATION ¨C PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer¡¯s tests to ensure that Foshan Shunde Mimdy Sealant Co., Ltd.¡¯s products are safe, effective, and fully satisfactory for the intended end use. FOSHAN SHUNDE MIMDY SEALANT CO., LTD.SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. Foshan shunde mimdy sealant co., ltd. Disclaims liability for any incidental or consequential damages. Disposable cartridges£ºnet 200ml, 225ml, 250ml, 280ml, 300ml; 24 pcs / box. Sausages£ºnet 590ml, 500ml; 20 pcs / box.
Neutral silicone sealant; Weatherproof sealing; structure use; Drum package,cartridge package,sausgea package; factory price
Silicone sealant, window & door sealing/bonding, curtain glass sealing/bonding.Manufacturing
Neutral silicone sealant 1.Manufacturer of silicone sealant in over 15years. 2.We insist on good quality with competitive price to make clients satisfied. 3.Final price will be determined by more details confirmed. 4.Free samples available,delivery cost is to be paid by clients. 5.OEM/ODM available. 6.Health and safety considerations 7.LT: 7-15days.
CHARACTERISTICS: 1.Good weather resistant ability. 2.One-component,moisture curable,excellent thixotropy,easy to apply. 3.Persistent water proofing. 4.Good adhesion, excellent adhesion to most building materials. MAIN USE: It's suitable for the sealing of the joints of all kinds of architectural doors and windows, and the assembly and sealing of doors and windows glass. Not suitable for structural bonding. COLORS: Clear, white, black, grey and other colors based on customer's requirement. PACKING: It is available in 280mm and 300ml disposable plastic cartridges, and 590ml sausages. TRANSPORTATION: This product is transported by non-dangerous goods. STORAGE: When stored at 27 or lower temperature in the original unopened container, it has a shelf life of 12 months from the date of manufacture. INT-795 clear sealant has a shelf life of 12 months from the date of manufacture.
Netural Silicone Sealant T-600 is a one component,high quality moisture curing neutral silicone sealant designed for sanitary applications where non-corrosive, moldproof and chemically resistant properties are required. It is suitable for sealing of connection joints between varieties of substrates in wet areas. CHARACTERISTICS: Mold & mildew proof. Resistant to cleaning agents. Maintains its flexibility at temperature extremes. Highly elastic, 25% movement capability. UV, water and weather proof. Non-corrosive neutral cure. Fast curing. Low odor. Interior/exterior use. Non-sag. MAIN USE: 1.Sealing applications of joints around bathtubs,showers and sinks. 2.Sealing of joints between tiles, ceramic, metal sheets and walls. 3.Sealing expantion joints in tile walls. 4. Sealing of connection joints between walls and floors. 5. Sealing of joints between glazing and supporting substrates. PACKING: It is available in 280ml and 300ml disposable plastic cartridges. COLOR: Clear and other colors based on customer's requirement. STORAGE: When stored at 25 or lower temperature in the original unopened container, it has a shelf contact:
INTRODUCTION: Acetic Silicone Sealant t300 is one-component, acetoxy cure, high quality silicone sealant designed for big glass and other general purpose glazing and waterproofing application. It has high tensile strength and good elasticity, excellent weatherability, stability,waterproof and good adhesion to most construction materials without a primer. MAIN USE: 1.Fixing and glazing for glass structural for all kinds of architectural curtain wall. 2.Jointing and sealing for all kinds of ornamental glass engineering. 3.Big glass panels, aquarium, swimming pool sanitary works and other glass engineering. COLOR: Clear, white, black, grey and other colors based on customer's requirement. PACKING: 240ml/260ml/280ml/300ml per pcs; 24pcs per carton. TRANSPORTATION This product is transported by non-dangerous goods. STORAGE: When stored at 27 or lower temperature in the original unopened container, it has a shelf life of 12 months. CONTACT:
Acetic silicone sealant 1.Manufacturer of silicone sealant in China over 15years. 2.We insist on good quality with competitive price to make clients satisfied. 3.Final price will be determined by more details confirmed. 4.Free samples available,delivery cost is to be paid by clients. 5.OEM/ODM available. 6.Health and safety considerations 7..LT: 7-15days.
Product Description . Acryrub Ps a high-quality, plasto-elastic onecomponent joint ro+ isealant based on acrylic dispersions. Key Features: Very easy to apply. Colour fast and waterproof after curing. Can be painted over after curing. Very good adhesion on many porous surfaces and aluminium. Easy tooling & finishing. Non toxic & non flammable. No mass-water clean up. Paintable Application: Joints with movements up to 15%. Connection joints in the building industry. Joints between windowsills, between skirting-board and floor between brickwork etc. Filling all gaps & cracks. Perimeter sealing around doors and windows. Modular kitchen sealing. Cupboard sealing. Shelf life And Storage: 12 months from date of manufacturing in unopened packaging stored in a cool and dry place at recommended temperatures between Protect against frost. quality like mcoy , boss & fevisil ( pidilite) Additional Information: Item Code: 001 Production Capacity: 4 ton / day Delivery Time: 3-4 days Packaging Details: 1 box 24pcs master box 4 24 96pcs
Product Details:- Application Industry- Weatherproofing Strength- High Shelf Life- 1 Year Colour- Black Packaging Type- Plastic Bottle Pack Size- 300 ML
Product DescriptionWe are a leading Suppliers GP Plus, BSealant, GP Silicone Sealant is a high-quality,elastical one-component joint sealant based onsilicones.Characteristics:- Very easy application- Permanent clear, UV-resistant- Stays elastic after curing- Very good adhesion on many materials- Typical acetic smell- General sealing for automotive applicationsApplications:Building- and construction jointsGlazing and connection jointselastic joints in coldstore and container applicationsSealings in air condition systemsGeneral sealing for automotive applications.
cartridge / sausage
General Purpose Silicone Sealant Brand Name SHARK44 Manufactured In The Sultanate Of Oman
High Tempreture Silionce Sealant Formulated In The USA Manufactured In The Sultanate Of Oman Take Above 280 Celcious Tempreture GROSS WEIGHT 330GMS Gasket Maker
MP is an easy to use 1 component oxime type silicone sealant which there is pungent smells less and little corrosion as a multi-purpose silicone sealant. It may be used for various construction parts including windows and glasses because of excellent weather-proofing, durability, adhesion, and construct ability. Use Window and frame joint sealing Glass, mirror, and Al sash sealing **Always test adhesion to substrate before starting project Feature 1 Component Type Silicone Sealant Neutral Curing Type Excellent adhesion to various materials without any primer Easy to use as one component and room temperature curing type Easily squeezable for convenient work Good weatherproofing and durability Advantages Good adhesion to various materials like PVC , metal panel , and glass Excellent weatherproofing Non Slump Packing / Color 300g Plastic Cartridge Type Packing (transparent) 400g Plastic Cartridge Type Packing (other colors) 25 ctg / Box
Silicone sealant equipment produced by JCT company,Well made,Reasonable structure,Easy to operate,Suitable for the production of a variety of silicone sealant. We can provide custom-made for you . .Production line specifications: 1)30-60 tons / month silicone rubber production line; 2)60-120 tons / month silicone rubber production line; 3)120-360 tons / month silicone rubber production line; 4)150-450 tons / month silicone rubber production line; 5)300-600 tons / month silicone rubber production line;
Product Properties Density: 0.96±0.03 g/ml Colorï¼?Clear, Whiteï¼?black Sag degree upright and parallel: No sag when applying Surface forming timeï¼?â?¤15min Tensile strengthï¼? â?¥0.6mpa Elongation at breakï¼?â?¥350% Application Rate: â?¥80ml/min Shore A Hardness: 13~23 Temperature resistance: -20-90 Packingï¼? 300ml ï¼?280ml ï¼?24pcs/carton
The brand KNG 995 structural silicone sealant is mostly used for bond and seal of structural device for glass curtain wall, aluminum curtain wall, stone curtain wall, lighting top and metal constructional engineering. It can be used for the second seal for hollow glass and seal for industry. Features: Permanently waterproof & weatherproof seal. Cured sealant that's mold & mildew resistant. Superior paintability. Low odor & low VOC content. Lifetime guarantee. Pack sizes: 300ml Plast Cartriage .
