I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
Cmmdity: Aluminum Fluride (Aluminium fluride) ther name: Aluminum trifluride Frmula:AlF3 M.W.:83.98 Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released. Specificatin: grade chemical cmpsitin % Physical character F Al N2 Fe2342- P25 LI Bulk dity g/cm3 AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5 AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3 AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7 AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7 Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc. Brief Intrductin f the Prductin Technics In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water. Packaging packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
PET TRAYS with not other contamination. Clean material and was never used. Post industrial Corlor: Crystal and light blue is 50/50 Packaging: BALES
Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Commodity: Calcium chloride Molecular formula CaCl2 H.S code 28272000 Product feature Calcium chloride is an inorganic salt, which exists as solid or liquid. Solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. With different crystallized water contents, it can be dihydrate or anhydrous. Liquid calcium chloride is a colorless, clear solution. As calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature, Specifications: Analysis Item Standard Calcium chloride (CaCl2) 74%min,77% min,94%min Total Chlorinated Alkali: (NaCl) 5.0%max Magnesium Chloride(MgCl2) 0.5%max Insoluble matter in water 0.25%max Calcium Sulfate (CaSO4): 0.2%max Ferric Oxide (Fe2O3) 0.025%max Heavy Metal as Cu., Pb., Cd., Cr., Hg., As 0.005%max Application Mainly used in drying, melting snow for airport express and street, concrete desiccant and concreting fast, removing dust and oil industry. Exporting Packing :Plastic woven bag with PE ,25kg/50kg/1000kgs net weight or 25kg x 40 bags into one big bag or 40 bags on a pallet with shrink-wrapped Means of transportation :in containers or by bulk vessel with large quantity
Dolomite: Dolomite a common sedimentary rock-forming mineral that can be found in massive beds several hundred feet thick. They are found all over the world and are quite common in sedimentary rock sequences. These rocks are called appropriately enough dolomitic limestone. Applications: - Dolomite is chosen for many construction and building product applications due to its increased hardness and density. - Asphalt and concrete applications prefer dolomite as filler for its higher strength and hardness. - Dolomite also finds use in a number of applications as a source of magnesium such as glass and ceramics manufacture, as well as a sintering agent in iron ore - Palletization and as a flux agent in steel making. - Farmers use dolomite for agricultural pH control. - The chemical industry uses the mineral dolomite in making magnesium salts including magnesia, magnesium oxide (MgO), which is used in pharmaceuticals.
Ciptadent Toothbrush Available variant Crystal Medium, Crystal Soft, Double Active, Diamond Head Soft, Full Head Soft, Full Head Medium, Extra Clean Medium, Extra Clean Soft, Charcoal Protection, Complete Care, Perfect Care. Product is Manufactured by PT Lion Wings.
Calcined Bauxite: Calcined Bauxite is obtained by calcining (heating) superior grade Bauxite at high temperature (from 850 oC to 1600 oC). This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57 % to 58 % in raw Bauxite, Calcined Bauxite has an alumina content of 82 % to 86 %. The heating is carried out in rotary kilns. Calcination is done at different temperatures ranging from 850 oC to 1600 oC depending upon the customer’s application. We export Calcined Bauxite for various applications such as refractory bricks, abrasives, steel polishing, etc. We provide consistency in quality and availability of Calcined Bauxite at extremely competitive prices. Applications of Calcined Bauxite: Refractory Grade Calcined Bauxite (CB - I and CB - II Grade) : To make refractory grade, Bauxite is thermally treated at 1600 oC to produce Calcined Bauxite where the Alumina content is mostly above 82%. Brown Fused Alumina, Proppants and Road Surfacing : To make the above grades, Bauxite is thermally treated at 1000 oC - 1200 oC to produce Calcined Bauxite where the Alumina content is anywhere between 80-88% depending on the requirement. Minimum Order Quantity : 1 Containers
Top Wafer Chocolate Available Variants Black in White 6x24x13gr, Black in white 144x9gr, Black in White, Chocolate 144x9gr, Chocolate Extra Large 8x24x32gr, Chocolate 6x24x32gr, Chocolate Sp 8x8x3x32gr, Strawberry 6x24x13gr, Strawberry 144x9gr, Strawberry Extra Large 8x24x32gr, Tripel Chocolate Extra Large 8x24x13gr, Tripel Chocolate144x9gr. Product is Manufactured by PT Perusahaan Industri Ceres.
Commodity: Dicalcium phosphate Feed Grade Use DCP is the feed preparation of raw materials, Animal right to supplement calcium needs. Coarse its products more applicable to the preparation hens, ducks feed, concentrate feed and premix. Product Nature Molecular Formula:CaHPO4·2H2O,Molecular weight:172.09,After drying with loose white powdery crystals or granules. Neutral products, the melting acid, water-soluble, hygroscopicity small, heated to 90 around gradually lose water of crystallization. Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 18% of the products, due to a small amount of MCP, and its biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG26362000 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Coarse particle DCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product of Micro-particle DCP granulation from mechanical, without any chemical binder. Specifications Appearance white and gray powder/granule Total P 18% min Calcium 21% min F 0.18% max As 30 ppm max Pb 30 ppm max Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 21% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity. Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. coarse particles MDCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product produced by micro-particles MDCP form, without any chemical binder. Specifications Appearance white powder or granule Phosphate  21% min Calcium     15% min Fluorine    0.18% max Arsenic    30ppm max Pb   30ppm max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Monocalcium Phosphate (MCP) Feed grade Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 22% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG28611997 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Specifications Appearance white powder or granule Total P 22%min Ca 13-18% F 0.18% max As 10 ppm max Pb 10ppm max Moisture 4%max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place
4-Hydroxybenzoic acid Chemical Name:4-Hydroxybenzoic acid Trade Name:p-oxybenzoic acid Molecular Formula:C7H6O3 Molecular Weight:138.12 CAS No.:99-96-7 Properties:white odorless crystalline powder, easily soluble in hot water and alcohols, aethers and acetone, slightly soluble in cold water and benzene, insoluble in carbon bisulfide; relative density is 1.46 Use: Can be used as antiseptic, intermediate of dyes, pharmaceuticals; as main material of liquid crystal polymers; as material of pesticide intermediate Specification Item Specification Polymer Grade Technical Grade Appearance white crystal powder white crystal powder Purity(on dry base) % 99.6 99.0 Melting Point 214-217 212-216 Odor odorless odorless Solubility Clear and transparent clear and transparent Loss on Drying % 0.20 0.50 Color(Pt-Co) 10 40 Ash % 0.02 0.15 Sulfate(SO42-) 0.01 0.05 Chloride(Cl-) % 0.005 0.02 Phe% 0.01 0.10 Salicylic Acid % 0.02 0.10 4-Hydroxyisophthalic Acid(HIPA) ppm 500 / Insolubles in Metha ppm 50 / Potassium(K+) ppm 5 / Sodium (Na+) ppm 5 / Iron (Fe) ppm 5 / Ca2++Mg2+ppm 5 /
Formula:KAl(SO4)2 12H2O Relative Molecular Weight:474.39 CAS NO,: 7784-24-9 EINECS No.:5637-689-7 HS CODE.: 2833301000 Appearance: lump, white crystal, white powder Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating Usage; Food industry: Buffering agents and leavening agents in food-grade products. Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc. Items Specifications Potassium aluminum sulfate [AlK(SO4)2.12H2O] % 99.5 Plumbum(Pb) mg/kg 5.0 Arsenic (As) mg/kg 2.0 Fluorine (F) mg/kg 30.0 Selenium (Se) mg/kg 30.0 Moisture % 4.0
Commodity: Potassium Permanganate Molecular formula:KMnO4 Molecule Weight:158.03 CAS:7722-64-7 EINECS:231-760-3 UN 1490 Hazard Class: 5.1 Physical State: Needle-like lustrous and dark purple crystal. It can dissolve in water, and it is a strong oxidant. Melting Point :270 C ,decompound Specific Gravity :2.703 ,Solubility in water :6.4 g/100 mL (20C) ,Stability :Stable under ordinary conditions Use Mainly used in medical industry, water treatment, metallurgical industry, chemical industry and food industry. Quality Standard Item Standard BP2000 Appearance purple noodle crystal Purity 99.3% min Chloride 0.01% max Sulfate 0.05% max Insoluble matter in water 0.15% max Moisture 0.5% max As 20 ppm max Cd 50 ppm max Cr 50 ppm max Hg 10 ppm max Pb 50 ppm max Se 50 ppm max Ni 50 ppm max Sb 50 ppm max Packing and Storage Packing: 50kg net weight new galvanized drums with P.E. Liner. Stored in a cool, ventilated, dry place.
Name: 2-hydroxy-6-naphthoic acid Alias: 2,6 acid; 2-naphthol-6-carboxylic acid; 6-hydroxy-2-naphthoic acid; 6-hydroxy-2-naphthoic acid CAS NOï¼?16712-64-4 Molecular formula: c11h7o3 Molecular weight: 187.172 Product quality standard: Appearance characte Light yellow powder Content 99% 2-naphtholâ?¤0.10% 2,3-acidâ?¤0.10% melting point243-245�°C Loss on dryingâ?¤0.30% heavy metalâ?¤20ppm Application: used in medicine, liquid crystal, paint, etc. Packing: 25kg / cardboard barrel, or according to customer requirements
Product Name Citric acid monohydrate Product Charactersï White Crystalline Powders, Colorless Crystals or Granules Executive Standards BP/USP/FCC/E330/GB1886.235-2016 Packaging plastic woven bag, 25kg net composite paper-plastic bags or 3-ply kraft paper bags with PE liner, 500kg or 1000kg net PP woven Jumbo bags Storage Kept in a light-proof, well-closed, dry and cool place Main Usage Citric Acid is mainly used as acidulant, flavoring agent, preservative and antistaling agent in food and beverage industry.it is also used as antioxidant, plasticizer and detergent in chemical, cosmetics and cleaning industries.
Sodium chlorate Quality index: Control project Indicators Type Type grade qualified grade appearance White or yellowish crystals sodium chlorate(as dry basis), % 99.0 99.0 98.0 moisture, % 0.30 0.50 0.80 water insoluble, % 0.02 0.03 0.03 chloride( CL), % 0.20 0.20 0.30 sulfate(SO4), % 0.10 0.02 chromate(CrO4), % â?¤ 0.01 0.02 ferrum (Fe), % 0.005 0.05 To use: Used for manufacturing chlorine dioxide (can do tap water treatment), sodium chlorite and other chlorate, perchlorate Used in herbicide, oxidant, paper making, printing and dyeing, tanning leather, explosive, printing ink manufacturing Used for match, fireworks, medicine, metallurgical ore treatment and bromine extraction from sea water Packing:  25kg plastic woven bag 1000Kg woven bag
ProName: Acetone oxime ,Acetoxime CasNo: 127-06-0 Molecular Formula: C3H7NO Appearance: White crystal ProductionCapacity: 1-100 Metric Ton/Month Grade: Industrial Grade Specifications: index value appearance white crystalline powder or flakes Assay 99.0% residue on ignition 0.01% Boiling point 135 c at 1,013 hpa Moisture 0.25% Uses: It is used as raw material for medicine, pesticides, dyes and organosilane coupling agents. It is also useful in the determination of nickel and cobalt. Acetone oxime is an excellent corrosion inhibitor (deoxidant) with lower toxicity and greater stability compared to hydrazine. Package: 25kg carton drum or 1kg foil bag or by request of clients Storage: Store in dry, dark and ventilated place Transportation: by sea or by air
