Rubber sleeve is the most important component for any type of pinch valves, it is the core of pinch valve. Rubber sleeve provides corrosion & wear resistance, and pressure bearing capacity. The quality of pinch valve is as good as the quality of its sleeve.
Control medium: compressed air Applicable temperature: 100 Acid and alkali resistance: 15% concentration; Structural type: floating straight-through type; Minimum closing pressure: 0.2Mpa; Maximum control pressure: 0.6Mpa; Flange pressure: PN10, PN16; Normal working pressure difference: 0.2 0.3Mpa; Applicable media: fibrous liquid, petroleum, pulp, cement, powder, slurry, sewage sludge; even if it is mixed with solid
Nickel Alloy Mini Ball Valve
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
Cast Iron Gate Valve Pressure Rating : Class-125 Material : Cast Iron Description : Bolted Bonnet, Inside Screw, Rising Stem Trim : All Iron / Gun Metal Ends : Flanged Operator : Hand wheel Item Code : CI000004 Size : 50mm Notes : Available Valve Size : 40mm to 300mm
Bronze Relief Valve Rating : Max. Working Pressure 10.34 Bar Water or Air Material : Bronze Description : Right Angle, Enclosed Discharge Ends : Inlet Screwed Male to BS:21, Outlet Screwed Female to BS:21 Specials : Suitable for Water, Air Item Code : BM000016 Size : 15mm Notes : Available Valve Size : 15mm to 80mm
Bronze Relief Valve Rating : Max. Working Pressure 10.34 Bar Water or Air Material : Bronze Description : Straight Type, Open Discharge Ends : Screwed Male to BS:21 Specials : Suitable for Water, Air Item Code : BM000014 Size : 15mm Notes : Available Valve Size : 15mm to 80mm
Bronze Safety Valve Rating : Max. BOP 250 PSIG (17.24 Bar) at 435° F (225 C), Set Pressure 250 PSIG Material : Bronze Description : Angle Pattern, Pop Type, Enclosed Dischage Ends : Flanged Specials : IBR Item Code : BM000013 Size : 15mm Notes : Available Valve Size : 15mm to 80mm
Bronze Safety Valve Rating : Max. BOP 250 PSIG (17.24 Bar) at 435 F (225 C), Set Pressure 250 PSIG Material : Bronze Description : Angle Pattern, Pop Type, Enclosed Dischage Ends : Inlet Screwed Male, Outlet Screwed Female Specials : IBR Item Code : BM000012 Size : 15mm Notes : Available Valve Size : 15mm to 80mm
Gun Metal Foot Valve Pressure Rating : PN-6 Material : Gun Metal, Bronze Description : With Brass Strainer, 1mm Dia perforation Ends : Screwed Female to BS:21 Item Code : GM000065 Size : 15mm Notes : Available Valve Size : 15mm to 150mm
Brass Swing Check Valve BS 5154 Pressure Rating : PN-20 Material : Forged Brass Description : Screwed in Cover Ends : Screwed Female to BS:21 Item Code : FLB00045 Size : 15mm Notes : Available Valve Size : 15mm to 50mm
Gun Metal Globe Valve Pressure Rating : Class-150 Material : Gun Metal, Bronze Description : Union Bonnet, inside Screw, Rising Stem Ends : Flanged Operator : Hand wheel Item Code : GM00022 Size : 15mm Notes : Available Valve Size : 15mm to 100mm
Gun Metal Globe Valve Pressure Rating : Class-100 Material : Gun Metal, Bronze Description : Screwed in Bonnet, inside Screw, Rising Stem Ends : Flanged Operator : Hand wheel Item Code : GM00010 Size : 15mm Notes : Available Valve Size Class-150 15mm to 150mm PN-25 15mm to 100mm
Gun Metal Globe Valve BS 5154 Pressure Rating : PN-20 Material : Gun Metal, Bronze Description : Union Bonnet, inside Screw, Rising Stem Ends : Screwed Female to BS:21 Operator : Hand wheel Item Code : GM00014 Size : 15mm Notes : Available Valve Size PN-20 8mm to 100mm PN-25 15mm to 150mm
Gun Metal Globe Valve BS 5154 Pressure Rating : PN-16 Material : Gun Metal, Bronze Description : Screwed in Bonnet, inside Screw, Rising Stem Ends : Screwed Female to BS:21 / IS:554 Operator : Hand wheel Item Code : GM000008 Size : 15mm Notes : Available Valve Size PN-16 8mm to 100mm PN-25 8mm to 150mm
Gun Metal Gate Valve BS 5154 Pressure Rating : Class-150 Material : Gun Metal, Bronze Description : Screwed in Bonnet, inside Screw, Non-Rising Stem Ends : Flanged Operator : Hand wheel Item Code : GM000005 Size : 15mm Notes : Available Valve Size : 15mm to 100mm
Gun Metal Gate Valve BS 5154 Pressure Rating : Class-150 Material : Gun Metal, Bronze Description : Screwed in Bonnet, inside Screw, Rising Stem Ends : Screwed Female to BS:21 / IS:554 Operator : Hand wheel Item Code : GM00189 Size : 15mm Notes : Available Valve Size : 15mm to 100mm
Gun Metal Gate Valve BS 5154 Pressure Rating : Class-150 Material : Gun Metal, Bronze Description : Union Bonnet, inside Screw, Rising Stem Ends : Screwed Female to BS:21 / ASME B1.20.1 Operator : Hand wheel Item Code : GM00290 Size : 15mm Notes : Available Valve Size : 15mm to 50mm
Gun Metal Gate Valve BS 5154 Pressure Rating : PN-16 Material : Gun Metal, Bronze Description : Screwed in Bonnet, inside Screw, Non-Rising Stem Ends : Screwed Female to BS:21 / IS:554 Operator : Hand wheel Item Code : GM000002 Size : 15mm Notes : Available Valve Size PN-16 8mm to 100mm PN-20 15mm to 150mm
