Forklift Lithium Battery 48V 300Ah Suppliers and Manufacturers

Lithium Lifepo4 48V 72AH Battery Battery type: lithium Iron Phosphate (LiFePO4) Nominal Voltage / V 48V Nominal Capacity /AH (25 C, 0.2C) 72AH Nominal internal resistance: 0.5 m Weight 75 Lb (34Kg) Dimensions L x W x H 18-3/4 x 9-1/4 x 10-1/4 Inches (477 x 235 x 261 mm) Voltage Window 37v 2500 Cycles Operating Temperature 20 C to +55 C Storage Temperature 20 C to +45 C Terminal Anderson Plug SB175

This 80V 410Ah forklift battery are built in lithium battery technology, the Battery weigh as little as 2634lbs and normally use a standalone 480V, 3 phase charger. Some models are offered with a 110V, 56A output BIC (Built-in Charger) when portability is required. Which offer BMS controlled safety, long life,fast-charging performance, also the BMS embeds smart balancing algorithms that control all cell voltages, making sure they are constantly at the same voltage level, optimizing battery capacity.

Rack Lithium Battery EDLF series A 48V rack-mount lithium battery is a high-capacity, energy-efficient storage solution commonly used in telecom base stations and household energy storage system applications. It offers reliable backup power and a high cycle life. Product Description A 48V rack-mount lithium battery is a high-capacity, energy-efficient storage solution commonly used in telecom base stations and household energy storage system applications. It offers reliable backup power and a high cycle life. Features of LiFePO4 Battery Longer Cycle Life: Offers up to 10 times longer cycle life and five times longer float/calendar life than lead acid battery, helping to minimize replacement cost and reduce total cost of ownership. Lighter Weight: About 40% of the weight of a comparable lead acid battery. A 'drop in' replacement for lead acid batteries. Higher Power: Delivers twice power of lead acid battery, even high discharge rate, while maintaining high energy capacity. Wider Temperature Range: -20~60 Superior Safety: Lithium lron Phosphate chemistry eliminates the risk of explosion or combustion due to high impact, overcharging or short circuit situation. Multi-Protocol: The battery work well with multiple brands of inverters.

Product advantages: ï?¬All-in-one design, high integration and space saving installationï¼? ï?¬Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 yearsï¼? ï?¬Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics Built-in BMS management system with comprehensive protection and monitoring control functions 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable BMS battery management system, with SOC automatic calibration and high current passive balance function, combined with perfect operation control and management strategy, to achieve accurate and efficient management EMS energy management system, BMS with solar controller/AC charger, inverter centrally manages charge and discharge, effectively controls the charge and discharge current within the cell usage conditions, protects the cell and extend its service life

ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.

ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.

ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.

ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.

1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 10 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 11 Built-in BMS management system with comprehensive protection and monitoring control functions 12 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 13 Main control MCU can be centrally controlled and manage peripheral settings (AC charger, inverter, solar charger) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable

Product Features: 1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 1 Small size and light weight, Maintenance-free 2 Environmental protection and pollution-free materials, no heavy 3 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 4 Built-in BMS management system with comprehensive protection and monitoring control functions 5 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 6 Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable

Product introduction: This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and a wide temperature range

48v 100Ah lithium battery pack for AGV charge current: 60A discharge current: 80A size: L570mm*W300mm*H220mm weight: 50kg communication protocal: RS485, RS232, CAN

Specification of 48v 42Ah Lithium ion battery Pack for electric vehicles Item Rating Note 3.1 Capacity Typical 42Ah Minimum 41.5 Ah 3.2 Nominal Voltage Average 48V 3.3 AC Impedance Resistance 300m 3.4 Discharge Cut-off Voltage 39V 3.5 Charge Current 10A Standard Charge 3.6 Max. Charge Voltage 54.6V 3.7 Charge Time 3h 3.8 Max. Charge Current 10A 3.9 Max. Discharge Current 20A 3.10 Weight Approx 3KG 3.11 Operating Temperature Charge 0~+45 Discharge -20~+60 3.12 Storage Temperature less than 1 month -20~+50 Recommended storage temperature: 20 ,at the shipment state less than 3 months -20~+40 Application Electri Vehicle Electric tool Gas Chromatograph AGV/RGV Golf cart Patrol car Uninterrupted Power Supply Mobile base station back-up power Electric ship Low-speed electric cars

Major Technique Parameters: 1)Normal Capacity: 100Ah 2)Min.Capacity: 100Ah 3)Factory Voltage: 49.5V- 50.5V 4)End of discharge Voltage: 39V-40.5V 5)Maximum Continuous Discharge Current: 100A 6)Internal Resistance: 100m 7)Charging voltage 53.2-54V 8)Operation Temperature Range(Charge): 0-45C 9)Operation Temperature Range(Discharge): -20~60C 10)Dimensions: L482.6x W442x H177mm(contain terminal) 11)N.W: Approx.39KG With overcharge, over discharge, overcurrent, short circuit, over temperature protection. With a communication function, you can communicate with the computer, real-time monitoring of the battery parameters and status of the monomer. The product is widely used in access network equipment, remote exchange, mobile communication equipment, transmission equipment, satellite ground station, and so on, which is characterized by its integration, miniaturization, convenient battery maintenance, unattended, easy to use, energy saving and environmental protection. And microwave communications equipment and other communications or as a backup power supply.

With overcharge, over discharge, overcurrent, short circuit, over temperature protection. With a communication function, you can communicate with the computer, real-time monitoring of the battery parameters and status of the monomer. The product is widely used in access network equipment, remote exchange, mobile communication equipment, transmission equipment, satellite ground station, and so on, which is characterized by its integration, miniaturization, convenient battery maintenance, unattended, easy to use, energy saving and environmental protection. And microwave communications equipment and other communications or as a backup power supply. Major Technique Parameters: 1)Normal Capacity: 80-200Ah 2)Min.Capacity: 80-200Ah 3)Factory Voltage: 49.5V- 50.5V 4)End of discharge Voltage: 39V-40.5V 5)Maximum Continuous Discharge Current: 100A 6)Internal Resistance: 100m 7)Charging voltage 53.2-54V 8)Operation Temperature Range(Charge): 0-45C 9)Operation Temperature Range(Discharge): -20~60C 10)Dimensions: L482.6x W442x H177mm(contain terminal) 11)N.W: Approx.39KG

Item: 15S63Ah-PC01-A BMS: with Smart BMS Nominal Voltage: 48V Nominal Capacity: 63Ah Charge Current: 40A Discharge Current: 40A Internal Resistance: 30m Life Cycle: 2000 cycles Communication: RS485&RS232 Weight: 28Kg±2Kg Dimension: L400mm*W300mm*H240mm

Polinovel ES series are� customized� batteries for specific applications to meet the special requirements of the battery voltage, capacity, charge-discharge current, size, connecting� terminal, communication, and function. �  The ES� series batteries are larger in size than Polinovel standard lithium batteries that allow� storing� more energy in a single case. Our Lithium Ion Battery Features �· Customized battery size, specification and function to fit specific application �· Offering maximum energy in limited size, optimum battery performance �· Expert engineering team provide effective customize technical solutions �· Patented screw fastening structure and intelligent BMS �· Trustworthy innovative lithium battery manufacturer Custom Design � Customized lifepo4� battery size, shape, charge-discharge� current, terminals, and other additional functions (such as RS485 communication, LCD screen) to� perfectly� fit the specific� application. Maximum Power�  Offering� maximum energy in limited size.� Consider from actual application requirements, scientifically design individual battery voltage, capacity to provide optimum� battery performance. Effective Solution Expert engineering team understanding your ideas and quickly providing you lifepo4 battery solutions, it is the best choice to quickly find the right battery for your specific application. Lithium Battery Specification ES48400 Model ES48400 Nominal Voltage 51.2V Nominal Capacity 400Ah Energy 20480Wh Connection Customizable Standard Charge Volt 58.4V Discharge Cut-off Volt 40.0V Standard Charge Current 20A-100A Max. Charge Current 100A Const. Discharge Current 200A Peak Discharge Current 400A (

Type Lithium ion battery Nominal voltage 48V Nominal Capacity 30Ah Dimension customized Weight Approx: 7kg Max.charge current 1.0C Max.discharge current 30-50A Charge current Standard Charging: 0.5C Rapid charge: 1.0C Standard Charging method 0.5C CC(constant current)charge, then CV(constant voltage)charge till charge current decline to =0.05C Charging time Standard Charging: 2.75 hours(Ref.) Rapid charge: 2 hours(Ref.) Cycle life >500 times Operating temperature Charging: 0 °C ~+60 °C Discharging: 0 °C ~+60 °C Storage temperature -20°C~+60 °C